VTune support was already deprecated in patch below,
this one just formalizes that with SPDK 23.05 removal date.
(6b97cc)bdev, bdev_nvme: deprecate VTUNE support
Change-Id: I09f067a23453f994fa901aa3d82898257aa39a54
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16391
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I5b6912b316a0aabac4a65f766b20ae1ef32973cf
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16360
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
intel-ipsec-mb added NO_COMPAT_IMB_API_053 to allow
for backwards compatiblity for certain enums.
See intel-ipsec-mb patch:
(53a8371)Document and use new compilation flag NO_COMPAT_IMB_API_053
Meanwhile starting with DPDK 22.07, qat crypto updated the required intel-ipsec-mb
and disabled OPENSSL_API_COMPAT. Resulting in redefinitions from aes.h.
Patch breaking it:
(3227bc7)crypto/qat: use intel-ipsec-mb for partial hash and AES
Only _after_ DPDK 22.11 it was fixed:
(2a21107) crypto/qat: fix build
This means that DPDK 22.07 and DPDK 22.11.1 does not work with latest intel-ipsec-mb.
It does not affect earlier versions of DPDK, nor intel-ipsec-mb.
Only for this case, if the DPDK fix is not present,
define NO_COMPAT_IMB_API_053.
Change-Id: Ibe2edc5c79ac09b5260eeb0f7d53b4dcb26bcaa5
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16359
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: Ie204c603e51efe4e2d4bb2efa00d130986a42685
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16371
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch makes marking blobstore as dirty, separate from
persist process. Adding a context strucutre and new single
callback once completed.
It is being as part of refactor to allow marking blobstore
dirty when writing out extent page - see #2830.
Change-Id: Ie2e9cc32860697e0e747939842ab04f48fbff49b
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Patch https://review.spdk.io/gerrit/c/spdk/spdk/+/16328,
introduced a refactor for persist path. No functional change
should occur with it, but the code layout after compilation
(path length) might have changed.
It resulted in unrelated scan-build failure:
https://ci.spdk.io/results/autotest-per-patch/builds/95746/archive/scanbuild-vg-autotest/scan-build/report-d08e76.html#EndPath
Tried to replicate the issue without the above patch,
by increasing maxloop or -analyze-headers in scan-build.
Didn't result in any new failures in blobstore.
This seemed like a false positive, so it was verified:
https://review.spdk.io/gerrit/c/spdk/spdk/+/16333/
With no other options, an assert is added only to the
function where the false positive occured.
scan-build log for posterity:
blobstore.c:1062:58: warning: Division by zero [core.DivideZero]
desc_extent_rle->extents[extent_idx].cluster_idx = lba /
lba_per_cluster;
~~~~^~~~~~~~~~~~~~~~~
blobstore.c:1079:58: warning: Division by zero [core.DivideZero]
desc_extent_rle->extents[extent_idx].cluster_idx = lba /
lba_per_cluster;
~~~~^~~~~~~~~~~~~~~~~
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9dd729fa13ce1c9bbcb91e4326658e2b4e326e6d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16335
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The iobuf buffers are only used in accel when executing chained
operations. Since none of the components in SPDK are using chaining
yet, there's little point in having per-thread iobuf caches, as they
only reduce the number of available buffers in other libraries.
This change will be reverted once bdev layer and bdev modules are
updated to support chaining.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ibad19ea92f2218a8dec01e802a736cfdd357dfc6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16398
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This allows to get start address and length of each
memory chunk in order to create app-specific
resources.
Since we don't want to expose rte structure in the
callback, we have to remap rte data types to SPDK.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I3865c4cfe532c6a99a5a3c6c983ded8b9a338de1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since the perf application is run in the background the script would
not pick up its potential crash - the main condition itself was simply
checking if app is still running. Since there were occasions where
the failure was missed up until the cleanup stage, try to catch it
early on by verifying perf's exit status - hook it into NOT() as
the app is expected to fail by the test but we need to filter out
crash scenarios.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I9a9304616c0a4dba42467f65c1a2c770352f08ea
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16345
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This was added during debug/development and
was not deleted by accident.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I146748151623a3ea4808c7b5cc34085d30ca81b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16388
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For each NIC reduce number of configured ADQ tc
entries. Use only these ports which are actually
associated with NIC's IP address instead of using
all port numbers in use by Target's subsystems.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I90934db594be0412b0fb7fb2b26684733df7711a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16379
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add all subsystem ports to created traffic class
instead of just one hardcoded port number.
Change-Id: I702948958213eb920e56db4593f26f0ce122a8c0
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15596
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move ADQ traffic classess configuration after
Target has been configured. ADQ TC configuration
will rely on information generated by configuring
the target (e.g. port numbers).
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I5f5c438525d742ceab473c28afdb68d39ff019b8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15595
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Initial ADQ configuration in script was created based
on "Nov 2020 ADQ with SPDK Configuration Guide".
Update using latest June 2022 guide version.
- Channel inline flow director configured using
"devlink" for each TC separately instead of
using ethtool setting
- Disable channel packet inspect optimize priv flag
- Enable busy poll private flags
- Run NIC IRQ affinity script again after creating
TC's
- net.core.busy_poll and net.core.busy_read now both
set to 1
- Set acceptor_poll_rate when creating transport layer
Change-Id: I05b2d0aa2ddd5fc249889fb5e5d6118963367b36
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15584
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Any script or function called with run_test needs to
either execute or not be called at all.
Summary of all test executions is gathered based on that.
It would be possible to not catch that the test didn't execute.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib93d4ee9cccbcfa8506f9022f1a7cce97c0434f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16347
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The addition of mbuf splitting requires a few more unit tests.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I24309911d40aec14e7f7c504be276c7f79e3ef1d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16094
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Quite a few changes from the vbdev compress unit tests
mainly due to plumbing and structural changes from the
code under test now being an accel_fw module instead of
a bdev module. Coverage of critical functions matches
what it was for the common code.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia40c7a0ed72a427e71c00607d93e215e0265fcb1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The new compressdev unit tests will re-use quite a bit of code
from the old compress vbdev module so start this that so that the
next patch will be easier to review what's changed for as the
accel compressdev unit tests.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id91bb8630213e6046a5b38f31227476a33eb0675
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16063
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
directly
This patch removes hardcoded compressdev code from the
vbdev module and instead uses the accel_fw. The port required
a few changes based on how things are plumbed and accessed,
nothing that isn't be too obscure. CI tests were updated to
run ISAL accel_fw module as well as DPDK compressdev with QAT.
Unit tests for the new module will follow in a separate patch.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I769cbc888658fb846d89f6f0bfeeb1a2a820767e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13610
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
ublk could export a backend device as ublk block device (/dev/ublkb*).
A rpc method is used to add ublk device and it should be done
after creating ublk target. Corresponding, ublk_del_dev is
used to delete the specified ublk device.
Signed-off-by: Yifan Bian <yifan.bian@intel.com>
Co-authored-by: Xiaodong Liu <xiaodong.liu@intel.com>
Change-Id: I3a4ba8d8dc5f5ad241511ccbc9d3336b582a6dc5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15976
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add rpc methond for ublk target creation and destruction. Before to
add ublk device, need to initialize ublk target to create ublk
threads, corresponding an rpc methond to destroy ublk target is
also added. It will deinitialize ublk target and release all ublk
devices.
Signed-off-by: Yifan Bian <yifan.bian@intel.com>
Co-authored-by: Xiaodong Liu <xiaodong.liu@intel.com>
Change-Id: I5db0cf9cc68745440df999169aa1c61111010e02
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
ublk backend could support ublk driver with kernel. Specify
configuration parameter to start it up.
Signed-off-by: Yifan Bian <yifan.bian@intel.com>
Co-authored-by: Xiaodong Liu <xiaodong.liu@intel.com>
Change-Id: I55e7d757e04315b25e9bfab5fdcbb6621be3e29e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15680
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The mlx5 accel module supports crypto operations.
Data buffer is split into `block_size` chunks and each
chunk is enrypted individually.
mlx5 library contains some utility functions that will
later be used by other libraries, this lib will be
exntended later.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Iacdd8caaade477277d5a95cfd53e9910e280a73b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All DPDK related code is removed, handling of
RESET command was sligthly updated.
Handling of -ENOMEM was updated for cases when
accel API returns -ENOMEM
Crypto tests in blockdev.sh were extended with more
crypto_bdevs to verify NOMEM cases - that failed
with original vbdev_crypto implementation
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: If1feba2449bee852c6c4daca4b3406414db6fded
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14860
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The configuration is generated based on existing host's NUMA
topology (as seen via sysfs) instead of a total number of cpus as
it was done before. New logic attempts to load balance VMs and
their cpus based on nvme drives' NUMA location. If there is no
enough cpus left under the target node, all remaining nodes are
checked. For the sake of the performance, cpus are not mixed
between different numa nodes.
Disk map is created by mapping VMs to existing nvme drives
based on their NUMA location. Extra VMs are assigned in bus
order of the nvme drives.
SPDK cpus are split by matching the VM-to-nvme NUMA ratio.
Static list can be defined as well to override this behavior.
https://trello.com/c/HSoRtQkO/401-deprecate-vhost-performance-python-helper-script
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ia63c6f9a472a685d252efd110eaba7b114a87d2c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12401
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Attempt to send any queued writes even if the socket is in a group. This
will not work if there is a send task already outstanding.
Change-Id: Icc0b5884e3d247042194ad26b30340ceb824886c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15212
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Add RPC bdev_nvme_get_path_iostat to show I/O statistics for IO paths
of the NVMe bdev.
Change-Id: I22e5ad112d5cfa6d96cf246dcd0e511ae71dc839
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14745
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The directory containing the interface protobuf files recently changed.
Updating the documentation to point to the new directory.
Change-Id: I8c1586e7aee024a12867bc8c32cc7ad57868339b
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16350
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
That was the main intention behind the following patch:
https://review.spdk.io/gerrit/c/spdk/spdk/+/15356
however, the introduced logic was faulty. Fix it.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I84ec7ba79d477756c9064e592e93140e68038bc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16348
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Recent changes done to iobuf and accel framework
require us to adjust iobuf pool sizes when running
tests with high number of NVMe-oF subsystems.
Change-Id: I72ce6e71446bea0af44bdad6258e7d7f5d765656
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16288
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Handling for scalar dst buffers were removed in 1866faffe, and all
buffers are now described by iovecs. The dst field was removed from
spdk_accel_task, so we also need to remove any references to that field
from dpdk_compressdev. This patch fixes the build with compressdev
enabled.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I21fbbb45a15e7250944753e445dede7d586bf35b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16349
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is meant to improve performance of the heaviest checks, like
the shellcheck one, where instead of running against the contents of
the entire repo simply go through files that are meant to be
committed.
This mode has to be requested through the environment via the
CHECK_FORMAT_ONLY_DIFF.
For now, get_diffed_dups() is hooked into least performant
checks (permissions, shfmt, shellcheck).
Also, the git grep command in the main check_permissions() is dropped
as the idea of piping its output to git ls-files was faulty - the git
ls-files does not read its arguments from the stdin.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I098dcbbe18c08c08a8216857c7cf2c80c4021d31
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16049
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Bdevperf build directory was changed but
not updated in this script.
Change-Id: I939b541dbea6c94e7e2d3592890f4a4e8998d321
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
gcc-12 is really tricky. It detected that in
ftl_nv_cache_load_state() that when we do an FTL_NOTICELOG,
the dev and nv_cache values are associated with each
other by the SPDK_CONTAINEROF() operation.
So then in FTL_LOG_COMMON, it checks if dev is NULL. If it
is, it doesn't print the dev->conf.name, but still prints
the varargs which include nv_cache members. But if dev is
NULL then these nv_cache members wouldn't be valid either,
and that's what gcc-12 is complaining about, in a very
unclear way.
So now we just have FTL_LOG_COMMON contain a single line, with
a tertiary operator to print either dev->conf.name or "N/A"
depending on whether dev is NULL or not. I suspect this
fixes it because we've replaced the if statement with
a tertiary operator that is independent from the VA_ARGS.
Fixes issue #2829 (partially).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia56e2c7fb7966e7a5ceff35b36b0346b556ce7e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16342
Reviewed-by: <sebastian.brzezinka@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some data cannot be compresssed and if there is not room in
the output buffer for the uncompressed data and whatever
info the compress back end needs it will error out.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4cb47e6cdb3facd3867d5dc4fb6f9352a307e33c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16098
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We had it for compress but simply didn't think of a use case for
decompress. During the develpoment of the compressdev accel_fw
module it was discovered that compressdev does indeed provide the
uncompressed length on completion of decompress and the reducelib
uses it. So, add it here.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2f6a8bbbe3ef8ebe0b50d6434845f405afa7d37d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16035
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
From an earlier comment on the original patch that introduced the
module. Stop using the thread to associate the device_qp and
simply link it into the chan.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib55979247d9bdacdc868bdb9dea97e1941e1e8ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This is the port of the vbdev compress logic into the accel
framework. It includes just one enhancement, to only fill each
mbuf in either src or dst array with max "window size" param to
avoid QAT errors. Note that DPDK ISAL PMD was not ported as we
have native ISAL compression in accel now.
Note: ISAL w/DPDK is still built w/this patch, that can't be
removed until the vbdev module moves to accel fw as it still
depends on DPDK ISAL PMD.
Follow-on patches will include addition C API for PMD selection,
this patch just gets equivalent functionality going. Upcoming
patches will also convert the vbdev compress module to use the
accel framework instead of talking directly to compressdev.
More patches will also address comments on vbdev common code
that addressed here would make the review challenging.
This patch also fixes a bug in the ported code that needs to
be fixed here to pass CI. Capability discovery was incorrect
causing all devices to appear to not support chained mbufs,
with the mbuf splitting code this is important to get right.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7f526404819b145ef26e40877122ba80a02fcf51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15178
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
We will be creating a new accel module for DPDK
compressdev. We can heavily leverage all of the
code from the existing vbdev_compress.c file. So
just copy that file exactly to start, and then the
next patch will contain only the deltas for removing
the bdev/reduce plumbing and adding the accel
plumbing.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4f6ca1c2dad92eb8dd38b351602b65b8cb4ee4e8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15829
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Mellanox Build Bot
Adding script mdns_discovery.sh to test the mDNS discovery service at the host.
The script tests the RPC commands bdev_nvme_start_mdns_discovery, bdev_nvme_stop_mdns_discovery
and bdev_nvme_get_mdns_discovery_info.
avahi-publish tool is used to simulate the advertisement of the discovery service of the target subsystem.
Signed-off-by: Parameswaran Krishnamurthy <parameswaran.krishna@dell.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ieace458f87b5d9bd51aeb651d9419d07b6fee6d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16140
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We may need to process multiple events to get all of
the events associated with a newly published service,
so a 1 second poller is actually a bit too long since
we will only get one event per poll iteration. Shorten
it to 100ms instead.
It doesn't appear there is any easy way to use the avahi
API to help with this, maybe we could have some context
variable used to detect if an event was processed or not,
and call avahi_simple_poll_iterate() multiple times if
necessary. This might be something worth investigating
in the future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifea7a99dc8b8b501392e29276b20528a873b1ae1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16327
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds virtio_blk_get_transports matching the
virtio_blk_create_transport RPC. Allowing for querying
existing virtio_blk transports and displaying their options.
Signed-off-by: Krystyna Szybalska <krystyna.szybalska@gmail.com>
Change-Id: I0ec49c5f2ad11962feb5087dd376407ad125c349
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16303
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make vbdev_crypto_destruct() return 1 to signal that program
execution should wait for spdk_bdev_destruct_done() function,
which is added inside _device_unregister_cb().
This change is related to _vdev_dev_get() not being able
to find the devices, when called from _cryptodev_sym_session_free(),
as it uses device driver name, which might already be freed.
This occurs only during bdev module finish, when crypto bdevs
are being unregistered and vbdev_crypto_finish() proceeds to
call bdev name deletion without waiting for the unregister
callbacks to complete, which ultimately results in reading
freed pointers.
This only happens when code execution takes path for DPDK 22.11+.
Change-Id: Id9a43d07c90aef7a82867383fd77354ac521a3e7
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16290
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently delete_crypto_disk() calls spdk_bdev_unregister_bdev_by_name()
and immediately after exiting that function, it proceeds to bdev name
deletion. This causes callbacks triggered by above call to run with
references to bdev names that are partially unavailable due to free()
functions in vbdev_crypto_delete_name().
Add an intermediate callback that will call vbdev_crypto_delete_name()
and then the original callback that was sent as an argument to
delete_crypto_disk(). That way we are sure that bdev name deletion
is performed right after bdev unregister.
Change-Id: I483ce5c3c63596f54d44220ca61c5e97c3807faf
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It was found that if system has no crypto devs,
we exit earlier from init function and don't register
io_device. Later in fini function we may try to unregister
invalid io_device
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I23ac9674c02d4fe97f01c66928a5ec5a2b39ec47
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16321
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is a combination of commits which update vdev_crypto:
110d8411e bdev/crypto: do not create mempool for session private data
495055b05 bdev/crypto: update rte_cryptodev usage for DPDK 22.11
02caed6b5 bdev/crypto: remove mempool usage matching < DPDK 19.02
5887eb321 bdev/crypto: do not track type of crypto session
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I30c4f76e4e7b4865a7daa638d357888bb5e02071
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16039
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
