This allows the pipe to fill up entirely, instead of reserving 1 byte.
This tends to keep copies from the pipe aligned over time.
Change-Id: I4801d62fa839165efef61ea1c83f602931ee7018
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16990
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As an lvstore is opening it calls spdk_bs_load(), which briefly opens
each blob and has no use for external snapshots. Since there is no point
in opening them at this time, don't open them. Once the blobstore has
been loaded, update lvs->load_esnaps so that external snapshots are
opened as the lvols open their blobs.
Change-Id: Ib16c8474300ff4b106aad0baa5b8b38332c23b01
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16424
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This provides the lib/lvol wrapper around blobstore's external
snapshots. Later commits make this work with vbdev_lvol.
The blobstore external snapshot implementation stores an opaque
identifier in an internal xattr. Lvstore uses this to store the
stringified UUID of the bdev that will act as the external snapshot.
This is used by the newly introduced spdk_lvol_create_esnap_clone() to
store the bdev UUID in the blob's metadata.
Change-Id: I58c7b32b656ad1d21a446e3b91e59e655efac7e4
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14977
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
This may have been needed in some previous iteration
of this duplicate QID test, but it's no longer required.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5c788a50d9c87cec7268ebb6f64d91fdc7b00873
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17369
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We need to be checking whether the specified qid
is too large or not - the current test says it is
doing that in the comments but is really just
checking the duplicate QID path (which following
test already covers).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I21dac3c7ec83a5c8e31fac77481708d54cb40e9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17368
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The 2 MiB minimum may be not reasonable for some users, so it is changed
to 4 KiB to allow wider range of possible values.
The new default is introduced to keep backward compatibility (2 MiB).
Signed-off-by: Szulik, Maciej <maciej.szulik@intel.com>
Change-Id: I450ff555f73ddd9be727ecc49209eb5af90fa88e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17406
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
This patch makes functions related to Asynchronous Event and error
handling public, so that they can be used in custom nvmf transport
compiled out of SPDK tree.
Signed-off-by: Szulik, Maciej <maciej.szulik@intel.com>
Change-Id: I253bb7cfc98ea3012c179a709a3337c36b36cb0e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17237
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will be useful in upcoming patch, where we
use the number of poll groups to dynamically pick
the buf_cache_size for each transport poll group.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id166098244287c56f12cdd88ba27a17fa34a4348
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17331
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It fixes the following error under clang:
/usr/bin/ld.bfd: bdev_nvme_ut.o: in function `bdev_nvme_get_mdns_discovery_info':
/home/ksztyber/src/spdk/module/bdev/nvme/bdev_mdns_client.c:578: undefined reference to `spdk_jsonrpc_begin_result'
/usr/bin/ld.bfd: /home/ksztyber/src/spdk/module/bdev/nvme/bdev_mdns_client.c:599: undefined reference to `spdk_jsonrpc_end_result'
It probably works on gcc, because the bdev_nvme_get_mdns_discovery_info
isn't called anywhere in the unit test and gets optimized away.
Fixes#2950
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2bb856afbc1a1a7e882dec72e4182ad9d3b9b24a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17260
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
It fixes the following error under clang:
/usr/bin/ld.bfd: vfio_user_ut.o: in function `nvmf_transport_create_async_done':
/home/ksztyber/src/spdk/lib/nvmf/transport.c:203: undefined reference to `spdk_mempool_lookup'
It probably works on gcc, because the nvmf_transport_create_async_done
isn't called anywhere in the unit test and gets optimized away.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I497aae4d211d556a531455481ee9a69067988cce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17259
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
There's no reason to check the OS to decide whether to build some unit
tests if we can rely on the configure parameters. For instance, on
FreeBSD, RDMA unit tests can be built and run successfully, while vhost
is always disabled in configure.
Fixes#2941.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0073783dcafa932f3a7f48fa553e04be7ae44f84
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17182
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
When an esnap clone blob's external snapshot arrives after the blob is
opened, it can now be hot-added to the blob. Presumably the new device
replaces a place-holder device that did not really atteempt IO.
Change-Id: I622feb84efa66628debf44f7e7cb88b6a012db6d
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16232
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To avoid races that lead to use-after-free errors during esnap device
hot add/remove, we need a way to ensure that the destroy callback does
not free a bs_dev until all consumers are done.
This adds reference counting to the create_channel() and
destroy_channel() callbacks. The reference couunt is initialized to 1
and is decremented by destroy(). The destroy() and destroy_channel()
callbacks are updated to free the bs_dev only when the reference count
drops to 0.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ie0b873717e431b33ce6548f878643dbc66d4f956
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16422
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As the blobstore is being unlaoded, async esnap channel destructions may
be in flight. In such a case, spdk_bs_unload() needs to defer the unload
of the blobstore until channel destructions are complete.
The following commands lead to the illustrated states.
bdev_malloc_create -b malloc0
bdev_lvol_clone_bdev lvs1 malloc0 eclone
.---------. .--------.
| malloc0 |<--| eclone |
`---------' `--------'
bdev_lvol_snapshot lvs1/eclone snap
.---------. .------. .--------.
| malloc0 |<--| snap |<--| eclone |
`---------' `------' `--------'
bdev_lvol_clone lvs1/snap eclone
.--------.
,-| eclone |
.---------. .------.<-' `--------'
| malloc0 |<--| snap |
`---------' `------'<-. .-------.
`-| clone |
`-------'
As the blobstore is preparing to be unloaded spdk_blob_unload(snap) is
called once for eclone, once for clone, and once for snap. The last of
these calls happens just before spdk_bs_unload() is called.
spdk_blob_unload() needs to destroy channels on each thread. During this
thread iteration, spdk_bs_unload() starts. The work performed in the
iteration maintains a reference to the blob, and as such it
spdk_bs_unload() cannot do its work until the iteration is complete.
Change-Id: Id9b92ad73341fb3437441146110055c84ee6dc52
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14975
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This adds support for inflate and decouple for esnap clones. Since there
are no immediate consumers that will provide back_bs_dev->is_zeroes()
that can return true, a shortcut is taken in that inflate and decouple
of esnap clones are the same.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I4d2e6565126991acd650f073ce876466334e986d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11574
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
An esnap clone needs special handling as snapshots are created and
removed. In particular: the following must exist on the blob that
directly references the external snapshot and must be removed from
others:
- Ensure SPDK_BLOB_EXTERNAL_SNAPSHOT invalid flag exists only on the
esnap clone.
- Ensure BLOB_EXTERNAL_SNAPSHOT_ID internal xattr exists only on the
esnap clone.
- Clean up any esnap IO channels on a blob that is no longer an esnap
clone due to snapshot creation or removal.
See the diagrams and description in blob_esnap_clone_snapshot() in
blob_ut.c for details.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ie4125d64d5bac9cfa7d6c7cc9a543d72a169f6ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11573
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The channel passed to blob IO operations is useful for tracking
operations within the blobstore and the bs_dev that the blobstore
resides on. Esnap clone blobs perform reads from other bs_devs and
require per-thread, per-bs_dev channels.
This commit augments struct spdk_bs_channel with a tree containing
channels for the external snapshot bs_devs. The tree is indexed by blob
ID. These "esnap channels" are lazily created on the first read from an
external snapshot via each bs_channel. They are removed as bs_channels
are destroyed and blobs are closed.
Change-Id: I97aebe5a2f3584bfbf3a10ede8f3128448d30d6e
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14974
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
On FreeBSD spdk_uuid_parse() will fail if the UUID doesn't have the
variant/version fields filled in correctly. So, use a proper UUID in
the test to make them pass on FreeBSD.
Fixes#2942.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7c5384086c6828c7380f9d128878578301077b17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17184
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As per https://github.com/DPDK/dpdk/commit/71998eb61ff
Change-Id: Ie4e5a38976145e1037ef45593b4dc4265091482d
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17322
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add an API to easily determine if a blob is an esnap clone, similar to
what already exists for snapshot, clone, and thin_provisioned.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ie07cd09b30513893e82f1c85e94a24a93c79d71e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16862
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
When consumers open a blob with spdk_bs_open_blob_ext(), they can set
esnap_ctx in struct spdk_blob_open_opts to have that context passed
to bs->external_bs_dev_create().
Change-Id: I0c1a9cec0e5aed5ef2a7143103e822cbe400aabb
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14971
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
During resize, we correctly determine if we have enough
md_pages for new extent pages, before proceeding with
actually allocating clusters and associated extent
pages.
But during actual allocation, we were incrementing
the lfmd output parameter, which was incorrect.
Technically we should increment it any time
bs_allocate_cluster() allocated an md_page. But
it's also fine to just not increment it at the
call site at all - worst case, we just check that
bit index again which isn't going to cause a
performance problem.
Also add a unit test that demonstrated the original
problem, and works fine with this patch.
Fixes issue #2932.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iba177a66e880fb99363944ee44d3d060a44a03a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17150
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: 阿克曼 <lilei.777@bytedance.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
If blob_freeze_io() is called twice in a row,
and the second time occurs before the for_each_channel
for the first completes, the second caller will
receive its callback too soon.
Instead just simplify the whole process, always do
the for_each_channel and don't try to optimize it
at all. These are infrequent operations - correctness
and simplicity are in order.
A few additional changes:
1) Make same changes for unfreeze path.
2) Add blob_verify_md_op() calls, just to be sure
these are only called from md_thread. This was
already checked in calling functions, but as these
functions get called from new code paths (i.e.
esnap clones) it can't hurt to add additional
checks.
3) Add unit test that failed with original code, but
passes with this patch.
Fixes issue #2935.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibefba554547ddf3e26aaabfa4288c8073d3c04ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17148
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Community-CI: Mellanox Build Bot
Now that all crypto operations are using interfaces that support memory
domains, bdev_crypto can report support for memory domains.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I13a128a599f6560197fed3405599c2a6bb609703
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
It is quite common for a user to use the exact same iovec (in memory) to
describe buffers for two different operations. If that iovec was
describing accel buffer, accel would modify it replacing it with an
actual buffer. This is broken if that iovec was used by some other task
in a sequence, as accel wouldn't be aware that it has been changed too.
To address this, accel will use a new iovec from the aux_iovs array. It
means that accel buffers always *must* be passed using a single iovec.
Theoretically, users could chunk that buffer into several iovecs, but
spdk_accel_get_buf() always returns a single buffer, so, in practice,
this should never happen, and therefore is unsupported.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I25271bc032987dd6028fb7b3adde061657759b4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17039
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
All these callbacks look identical now, so there's little point in
having three different functions doing the same thing.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I60d1426b5d2b20d924776699885e6a9dd176504a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17024
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
After changing to spdk_accel_append_*, this code is no longer necessary,
as accel operations are now executed by the base bdev/bdev layer.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2e31249dfdf7abeee420744a5cc75b8273ecbad9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17023
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Similarly to reads, writes path is now also using the spdk_accel_append*
interface for performing encrypt operation.
Additionally, this patch also changes the way aux buffer is allocated -
spdk_bdev_io_get_aux_buf() was replaced with spdk_accel_get_buf(). This
ensures that the actual data buffer will be only allocated if it's
actually needed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I3cd1d4f5753a95709d7b81de23d9227102a74261
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17022
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
The new spdk_accel_apend_decrypt() interface is now used for all read
requests for decrypting data. This makes it possible to chain decrypt
operations with other operations in a sequence. Support for encryption
in the write path will be added in the following patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2f65044eeaf92232d839ddd166ae50889b3f386d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This patch enables passing accel sequence for read requests. The
handling is pretty similar to writes, but the sequence is executed after
a request is completed by a bdev module.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I79fd7d4873265c81a9f4a66362634a1c4901d0c9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16975
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
It is now possible to submit a write request with a sequence of accel
operations that need to be executed before actually writing the data.
Such requests will be directly passed to a bdev module (so that it can
append subsequent operations to an accel sequence) if that bdev supports
accel sequences and the request doesn't need to be split. If either of
these conditions are not met, bdev layer will execute all the
accumulated accel operations before passing the request to a bdev
module.
The reason for not submitting split IOs with an accel sequence is that
we would need to split that accel sequence too. Currently, there's no
such functionality in accel, so we treat this case in the same way as if
the underlying bdev module didn't support accel sequences (it's executed
before bdev_io is split).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I66c53b3a1a87a35ea2687292206c899f80aaed4a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16974
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This channel will be used to execute accel operation sequences.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ied4bb57d14a50a923908ffb13ef4ba34ca65175c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16972
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
When a blobstore consumer creates or loads a blobstore, it should be
able to set a per-blobstore context pointer that will be passed back to
the consumer via bs->esnap_bs_dev_create().
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I59c0ebe21eaf65c3d79a4ac3469715283f56313a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14970
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This structure can be allocated on the stack
where needed
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I92b7e777d4718c5f2dd1c09e8f1bed8fd6e6caf8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17075
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvme_ctrlr_disable() and nvme_ctrlr_disable_poll() were added almost a
year ago but they did not have any unit test.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I4d9abe37e5aea18893509776b54de495a407ba67
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17000
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add command dword 13 field to the extendable structure
spdk_nvme_ns_cmd_ext_io_opts. This now enables us to pass dspec
and dsm fields.
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Change-Id: Id4d3dac14fdbf0e2a57e0bf287551dfd827dd503
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16945
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Add default copy command support in bdev layer for backing devices that
does not support copy command.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I5632e25544e95ac0c53ff91c4cd135dac53323ae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16638
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Patch 55f947933 ("bdev: remove spdk_bdev_ext_io_opts from spdk_bdev_io")
changed the way bdev_nvme submits IO to the NVMe driver causing
performance degradation for requests with iovcnt = 1, as they also had
to go through the path that executes the reset_sgl/next_sge callbacks.
This patch reverts those changes back to the original code checking
iovcnt and using the non-SGL functions if possible.
Suggested-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5e7c6620d38b7690ff862d8cd0075afacc578217
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16961
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This is the beginning of support for external snapshots. An external
snapshot is a read-only blobstore device (struct spdk_bs_dev) that can
be used as a blob's back device. Normally a blob will have no back
device (a normal blob), a zeroes back device (a thin provisioned blob),
or a blob back device (a clone blob). When a blob has an external
snapshot ("esnap") as its back device, it is called an esnap clone.
With this patch, esnap clones can be created but they are not yet
useful. Subsequent patches in the series will plumb the IO path, enable
various features, and allow lvol bdevs to be esnap clones.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I29206b628a2b03b6386a88532565e228df988e0e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14969
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Perform all tests on devices that do and do not support
spdk_bs_dev::copy.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ic4c13ade9f45709b34a57f9fb7456d6c6a790a85
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16691
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This reworks how blob_snapshot_rw() tracks the number of bytes read and
written. It has no functional change: it simply makes the patch that
follows less complex.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ieeb738b6a814e7939931fecdfaf14b9f162d8431
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16861
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If the bs_dev was opened read-write, continue to take a
read-many-write-one claim. If it was opened read-only, take a
read-many-write-none claim.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I25d977c6961f962423899fb891ec912cd847930a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16282
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
External snapshots, which will be introduced in a later commit, will
need read-only blob_bdev instances. This support is partially needed to
support underlying devices that are naturally read-only and partially to
provide an extra layer of protection against accidental writes.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ibcb28d00ad644a6053aa5f4de15471c2cd8e348a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch removes references to deprecated PMEM from accel library.
The code that was executed when ACCEL_FLAG_PERSISTENT flag is set,
is no longer needed and is removed.
_sw_accel_copy() function is removed and replaced with memcpy(), as
after PMEM removal its functionality is the same as memcpy().
_sw_accel_dualcast() is no longer needed, replaced with direct calls
to memcpy()
Removed 'flags' parameter - it is no longer needed
accel_ut.c: removed references to PMDK
deprecation.md updated
ACCEL_FLAG_PERSISTENT flag will be removed in next patch.
Change-Id: I86130466fe7a5f6ee547df1517b803035ff41a7a
Signed-off-by: Marcin Spiewak <marcin.spiewak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16899
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If a driver is registered and selected, it'll now be used to execute
sequences of accel operations. The driver has priority over accel
modules, so the modules will only be used to execute operations that the
driver cannot perform.
Once driver completes a task (or a number of tasks), it notifies accel
using standard spdk_accel_task_complete(). To let accel continue
processing a sequence, driver can call spdk_accel_sequence_continue().
This can be done when the driver executes all tasks (1), an error occurs
(2), or the driver doesn't know how to execute a given opcode (3). In
case of (3), that operation will be executed using appropriate accel
module and, while the rest of the sequence will be sent back to the
driver.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If414c02073ffc731454e03d25c7ee02bef58463b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16548
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also test a case when opening an lvol fails due to insufficient
resources.
Change-Id: I8b1b7a9c4d67e93691f89541374c7ef09a7d3f18
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16944
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
