Add the second parameter remove and include path removal into
bdev_nvme_failover(). Additionally, bdev_nvme_failover() returns
only two return values, 0 or -EAGAIN, and hence change
bdev_nvme_remove_trid() to return the return value of
bdev_nvme_failover() directly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ife560f886e32ecec23691e01e87069502e27cc0c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4867
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Checking if destruct is false and setting destruct to true are
separated by mutex in remove_cb() and bdev_nvme_library_fini().
It was possible that multiple threads called nvme_bdev_ctrlr_destruct()
because the caller could call nvme_bdev_ctrlr_destruct() before
setting destruct to true after knowing it was false.
This patch ensures that nvme_bdev_ctrlr_destruct() is called only once.
Set ctrlr->destruct to true without releasing mutex after checking
if ctrlr->destruct is false.
If destruct is set to true before calling nvme_ctrlr_depopulate_namespaces(),
nvme_ctrlr_depopulate_namespace_done() may call nvme_bdev_ctrlr_destruct()
because it is likely that reference count is zero and destruct is true.
In this case, remove_cb() or bdev_nvme_library_fini() cannot call
nvme_bdev_destruct() after returning from nvme_ctrlr_depopulate_namespaces().
On the other hand, if a controller has no namespace,
nvme_ctrlr_depopulate_namespaces() does nothing and
nvme_ctrlr_depopulate_namespace_done() is not called. Hence
remove_cb() or bdev_nvme_library_fini() has to call nvme_bdev_destruct()
after returning nvme_ctrlr_depopulate_namespaces().
To unify both cases, initialize reference count to one as a sentinel value
and remove_cb() and bdev_nvme_library_fini() decrement reference count
and then calls nvme_bdev_ctrlr_destruct() if reference count is zero
after returning from nvme_ctrlr_depopulate_namespaces().
Additionally, add assert to check if reference count is not negative
to find bug in future.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8a617b5aa4d0a9faff832e63c2ed4b353341dd6b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4817
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
subnqn will be used to manage subsystem, and so add it to the output
of bdev_nvme_dump_info_json().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id28023754fa19d14aa9297f4e6676d235f024e0f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4974
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To improve readability and make the following patches easier,
factor out the common operation of bdev_nvme_create_cb() and
_bdev_nvme_reset_create_qpair() into bdev_nvme_create_qpair(),
and factor out the main operation of bdev_nvme_destroy_cb()
into bdev_nvme_destroy_qpair(). bdev_nvme_destroy_qpair() is used
in the error path of bdev_nvme_create_qpair().
Updating g_opts.io_queue_requests again is no harm and so is done
in bdev_nvme_create_qpair().
Use the term nvme_ch in bdev_nvme_create_cb() and bdev_nvme_destroy_cb()
for clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie0a4251023037958d122fbb5d7ee72d42238b3ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4981
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This change will make the next patch smaller and its review easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2784fa74dce98676958180bbf80a9a4f938454db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5101
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This change removes the necessity to get nvme_bdev_ctrlr by calling
nvme_bdev_ctrlr_get_by_name() and simplifies the code.
bdev_nvme_reset() checks if nvme_bdev_ctrlr->destruct is false first.
Hence we will not degrade stability.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7a3baab666644c3063af404905284c3e16bc62ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4843
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Calling spdk_nvme_ns_get_data(ns) on an inactive namespace will crash.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib8cfa84e785a4a04dc3b1826c700a22eeec51e3c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5013
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We have two functions, remove_cb() and bdev_nvme_library_fini() to
depopulate all existing namespaces.
Factoring out the operation into a helper function
nvme_ctrlr_depopulate_namespaces() will improve the readability.
Besides, change the line after return value for two functions to
adjust format.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibda921bdc94a50c14cca0ece462f76197efc5ccb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4642
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Swap the resetting case and the non-resetting case. Unlock mutex
before calling spdk_bdev_io_complete(). Use curr_trid instead of
tmp_trid to clarify the meaning of the stored value.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If3b520a16459aba498ac80ed887b9223ac5ca3d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4523
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Consolidating error paths will be helpful to create and associate
with the creating controller. Fix a couple of memory leaks in error
paths together.
Then rename create_ctrlr() by nvme_bdev_ctrlr_create() to follow
naming conventions and clarify what type of controller is created.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3f9073756198c0b0bc65b67ce84a41233297eac0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4509
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is nothing left here, so remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.
Starting with this patch literal passed to register,
serves as name for the flag.
All instances of SPDK_LOG_* were replaced with just *
in lowercase.
No actual name change for flags occur in this patch.
Affected are SPDK_LOG_REGISTER_COMPONENT() and
SPDK_*LOG() macros.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I002b232fde57ecf9c6777726b181fc0341f1bb17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
This clean up the code a little more. Use the term failover instead
of multipath in the error message.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b7fb8fe50b19b5639169c03f5242b9d6f14128b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4390
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdev_nvme_add_trid() is used once in the same file.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I738b7e959d13d419e090a019da6e7f1f09aa7109
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4388
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
PCIe failover is not supported yet and it is not possible that the
controller is included in g_skipped_nvme_ctrlrs for failover cases.
We can consolidate the code to create failover path in bdev_nvme_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ide456707a0b66a4b26eaf66392b9b53c3e659d9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This simpifies the code a little without any degradation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6006266e250f2d083aa12424809d04fac6a9f8f0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
_bdev_nvme_submit_request() already has a pointer to nvme_io_channel.
Passing nvme_io_channel simply to I/O APIs will be reasonable
simplification.
Two admin APIs, bdev_nvme_abort() and bdev_nvme_admin_passthru()
get the associated thread to the spdk_io_channel and set it to
nvme_bdev_io. These APIs get spdk_io_channal from nvme_io_channel using
the container_of macro. These APIs are not performance sensitive.
Using the contaier_of macro will be better than extracting the operation
from these APIs because we can keep the changes local to these APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I67985075d70551e4fe3bb84dfee15f1e4e882451
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4384
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When NVMe bdev module supports multipath, nvme_bdev will have multiple
nvme_bdev_ns, and I/O APIs need only nvme_bdev_ns. So change the parameter
from nvme_bdev to nvme_bdev_ns for I/O APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1e71abbab856112fdd6a333a89ba5f02f4e63ccd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4382
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to pass nvme_bdev_ns instead of nvme_bdev
to I/O APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I095478bc3ad305ba940fca101b74e74c7e8e74ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4381
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Struct nvme_bdev has a pointer to nvme_bdev_ctrlr and a pointer to
nvme_bdev_ns now, but nvme_bdev_ctrlr can be accessed via
nvme_bdev->nvme_ns->ctrlr, and so nvme_bdev->nvme_bdev_ctrlr is
duplicated.
The upcoming multipath feature will need struct nvme_bdev to have
multiple nvme_bdev_ns pointers.
Hence remove nvme_bdev_ctrlr from struct nvme_bdev and get a pointer
to nvme_bdev_ctrlr from nvme_bdev->nvme_ns->ctrlr.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie5b785cb26e535c7186fe630c1f8b7d598b0ba46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4288
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The bdev layer nicely handles the case where we call this
function with the buffers already present - it just
immediately calls the get_buf_cb. But this adds extra
overhead in the case where the buffer is already present.
Since nvme has no alignment restrictions, we can just
check the iovs directly and avoid the extra call to
spdk_bdev_io_get_buf when possible.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I66df0fde574a35e995a3432999d75bdbf9b27212
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4317
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
write instead of writev
Call spdk_nvme_ns_cmd_write_with_md if there is only one iov element.
Use spdk_nvme_ns_cmd_writev_with_md only if there is more than one.
This is about a 15% improvement in I/Ops.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1a99b5507d37cde04e81feada65b14554ad01a17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
readv API
It's cheaper to call spdk_nvme_ns_cmd_read_with_md than it is to call
spdk_nvme_ns_cmd_readv_with_md, so do a quick check of the iovcnt and
use the best one for the job.
This is about a 15% improvement in I/Ops.
Change-Id: I82e6677d1ac47abf9919f95e651e7a7595c5e9a3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4316
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow us to further develop the ecosystem for multipath
failover support.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I24a8cf13e60e6cc0d5b6374da33c8a4e5b6c499a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3069
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to avoid creating a separate rpc just for multipath TRIDs.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4e83167eaf16e50a72efbd513333a4d09c52be61
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2884
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When we fail to process admin completions on a controller
attempt to failover to a previously registered trid
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I547bd010f4b339b2af7f2b33027cddad4b4926bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3045
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We are about to instrument some checks in this function
that will access the nvme_bdev_ctrlr struct directly so
pass that directly since the ctrlr is still accessible from
the nvme_bdev_ctrlr struct.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4e0d0d6c433149368e84275426362f8283903027
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3340
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is part of a larger series enabling failover at the bdev
layer for NVMe.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic5c128244699c1a47275145ca7e41aa5f1366259
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3044
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch paves the way for introducing a tailq containing
multiple alternative paths to the same controller.
Change-Id: I13d30c12b8e0ce38eae687f9e76740be1d11e4d1
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3259
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change NVMe bdev module to enable abort as IO type.
Change _bdev_nvme_submit_request() to process abort request when the
IO type is abort.
The current thread tries aborting I/O command in the I/O qpair first.
If no I/O command to abort was found, send message to the thread which
is registered when creating controller. The controller thread tries
aborting admin command in the admin qpair next. If no admin command
to abort was found, complete the abort request with failure.
spdk_nvme_ctrlr_cmd_abort_ext() is used to try aborting command whose
cb_arg matches. qpair is set to NULL when trying to abort admin command.
Before calling spdk_nvme_ctrlr_cmd_abort_ext(), save the current
thread to process admin command completion correctly.
spdk_bdev_abort() supports any bdev module other than NVMe bdev
module and does not check CDW0 but checks only if the completion
status is success or failure. So add bdev_nvme_abort_done() and
converts the NVMe completion status to the bdev completion status.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If6aebae0ba2f6c5834ee926e161af9c4d825f341
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2040
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add thread pointer to struct nvme_bdev_ctrlr. The thread which
created nvme_bdev_ctrlr is set to the pointer.
The thread pointer will be used to limit only one thread to submit
admin abort.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia39d5cbc7a13b0e0022c0d5591069ea8776ef774
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3244
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Poller should return status > 0 when it did some work
(CPU was used for some time) marking its call as busy
CPU time.
Active pollers should return BUSY status only if they
did any meangful work besides checking some conditions
(e.g. processing requests, do some complicated operations).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id4636a0997489b129cecfe785592cc97b50992ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The error message is:
bdev_nvme.c:456:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
456 | int rc;
Reason: The CI testing pool will always use --enable-debug, but without this
flag, we will see complilation warning.
If we really want to catch this, it is better to really use this rc variable and print
some information.
Change-Id: Iec0ffcec4ec091d36044e3b36a9ac85e677b5c70
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3001
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we fail to process admin completions on a controller
attempt to failover to a previously registered trid
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Icdb43a726969fede4665f2fe59723dd90c5dad0d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2883
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is part of a larger series enabling failover at the bdev
layer for NVMe.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0d89e1afab8aeaa90237d0ba780d708154f6e3be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2881
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: Ieadf271a0c8530f2440cded05ad139483a8c5937
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2383
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: I2a8b70aa92828cf60d168dcf2985759e0eb9a6e3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2217
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
IO device "bdev_nvme_poll_groups" is not unregistered in the finish
module, so we need to unregister this io device, since the "nvme_if"
is staic variable in bdev_nvme.c, it's can't be accessed in common.c
so we use "g_nvme_bdev_ctrlrs" instead.
Change-Id: Id4675f5acc8f386609903497da5ca84bf8af3a15
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2035
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is always going to be true because of the
context we are in when calling this function, but
add an assert just to be safe.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ifbd075865a191529eb9e656c360f182dba8a85bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1985
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was changed to better facilitate thread safety.
In next patch a lock will be held when going over the
cuse devices list.
Now user is expected to pass a buffer of a sufficient size
that will be filled with ctrlr or ns cuse device name.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3202ef285e427111e3595389619463fda58dbef6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1978
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We will be create fine name for each poller but it will need large
effort. Replacing spdk_poller_register by the macro SPDK_POLLER_REGISTER
will provide better name than function address with minimum effort.
Following patches may improve function name for clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If862a274c5879065c3f7cb04dcb5ca7844523e68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Community-CI: Broadcom CI
Sending large amounts of data from host to the controller with 1s
admin polling time, take a lot of time (e.g. 1M firmware file in 4k
chunks takes ~17min).
Reducing this time to 10ms whole operation takes about 3s.
Change-Id: I2dabe9f60acab57e348c34bfabc3cc7479dedec9
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1393
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The adminq poller could get a failure if the ctrlr has
already been hot removed, which starts a reset.
But while the for_each_channel is running for the reset,
the hotplug poller could run and start the destruct
process. If the ctrlr is deleted before the for_each_channel
completes, we will try to call spdk_nvme_ctrlr_reset() on
a deleted controller.
While here, also add a check to skip the reset if the
controller is already in the process of being removed.
Fixes#1273.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I20286814d904b8d5a9c5209bbb53663683a4e6b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This isn't in the performance path, so using the mutex
here makes it a bit more consistent with other ctrlr
members such as 'destruct'.
This prepares for a future patch which will defer
ctrlr destruction on removal if a reset is in progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ica019cd90dc3b46ef6a13dd311054dbdc95855aa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1252
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Now that a namespace can be depulated asynchronously now, the NVMe bdev
module should also be finalized asynchronously, after all namespaces and
controllers are deallocated.
Change-Id: Ic082fec8e31e9bd5ee1c698cd8dfca9f248776d3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1198
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch adds the ability for a namespace to be depopulated
asynchronously. Currently both regular NVMe namespaces, as well as the
OCSSD ones are depopulated synchronously, but it'll be changed in the
upcoming patches.
The nvme_bdev_ctrlr.ref is now not only tracking the number of bdevs
created on that controller, but also the number of populated namespaces.
Change-Id: I7b112d9b0d41739f3dc7d427e9da340843128c54
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1197
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Since the OPAL here is just for NVMe device, so we don't need to use dev_handler as common
handler, just rename it to spdk_nvme_ctrlr. And we don't exit the initialization if
OPAL construnction had a failure. Also move the timeout initialization to construct().
Change-Id: I11f0aea961eaa3da0c6253eb03d0227f7e7e5f11
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1101
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
while the size of namespace is changed,
the resize event will be notified.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Allen Zhu <allenz@mellanox.com>
Change-Id: I5d85f17df898dc21c0ae1eb9f529dcb624a457ac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/849
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_nvme_comparev_and_writev function takes as an argument
only iovs for compare operation and uses them for write
operation. It should also take iovs for write operation.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I5be2610c3d8552559aa4db969d5acb78b1620079
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481806
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There was an issue in the hotplug poller where it would fail to
probe the added/removed nvme pcie devices due to an error trying
to find the PCIe transport type. This happened because the
`struct spdk_nvme_transport_id` needs to have its trstring filled in
after a change was made to get transports by name to allow for custom
transport types. This change fills in the trstring so that downstream
checks correctly pass.
Fixes#1159
Change-Id: I35d2834f3ba58a8e6f8e91d290c1f4cb9c158e5a
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When there is an error returned from low level driver, we should unregister
the poller and free the context, or it may get double free when reaching next
poll round.
Fix issue #1156.
Change-Id: I34ca605f11249b885756d761291aebbb7a382d7e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482215
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Compare and write fused operation num_blocks should
not exceed value of 'atomic compare and write unit'.
In case of NVMe native support we should read this
value from 'namespace atomic compare and write unit'
if set in namespace identify data, otherwise from
'atomic and write unit' field in controller identify
data. If bdev does not support this natively we should
set this value to 1.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib1ea02dbf9d1eed476d9dd0114ea96b1376e0c45
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477911
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function will be used for NVMe which supports
fused commands natively.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I5c41d98e1830ea9e14a521ccb06c6e9284857eb6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477026
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_ftl is virtual bdev now and is not associated
with nvme_bdev anymore so ftl_managed flag could be
removed.
Change-Id: I720e05aed9c36a9d36079276fbd27fe9ad70c0c0
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478614
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
In the case that there is no NVMe bdev configured and RPC is
running, it shall still allow the NVMe options set. Once there
is one NVMe bdev configured, it will not allow the NVMe options
set.
Change-Id: Ib6a527174137a5d4df7babe206d2527e600500c0
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch adds support for compare operation in
bdev nvme layer.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iac54e85af5b377d10124c72e26ed2a4d8f078af4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently the namespaces are depopulated in two cases: if the controller
is detached (either due to its hot unplug or RPC call) or due to
"namespace attribute changed" asynchronous event. It means that during
shutdown, when nvme_bdev_ctrlr is destroyed, the namespaces aren't
depopulated.
For regular NVMe namespaces it isn't a big issue, since their only
depopulate task is to unregister bdevs created on that namespace, which
is already done by the bdev layer. However, it can be a problem for
other types of namespaces (e.g. Open Channel), as they might allocate
their own context in nvme_bdev_ns.type_ctx, which, unless the namespace
is depopulated, cannot be freed.
Change-Id: I91c7f2a50b206b45eb5bdcada278d6454c4cf144
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478190
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds the logic for retrieving chunk notification log and
translating it into media management events to be sent to appropriate
Open Channel bdev.
Change-Id: I7e4860eda23e61d6208fc5f5861e8fd2b75685d3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If a spdk_bdev_io cannot be completed, because it is sent to a zone that
is currently busy, reschedule its submission. This mechanism will be
used by appends, as mutliple append commands can be directed to the same
zone at the same time.
Change-Id: I60da2bd1835380812d22536ea275fb8fed9f8561
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477437
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds support for saving JSON configuration of the OCSSD
bdev module required to recreate the current state.
Change-Id: Iedbdb8b4a2b7dd02a223ce6f073553e71b9c040a
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469090
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Added per-namespace config_json callbacks, so that each namespace can
dump its own configuration. This is a nop for regular NVMe namespaces,
but it will be used by Open Channel ones to save their bdev configuration.
The callbacks are executed after controller configuration has been
saved. This ensures that when a config is loaded, any namespace related
RPC calls (e.g. creating bdevs) are run after associated controller has
already been attached.
Change-Id: Ia18e15b46f10b058c1b6a9b74edb386e1b4874de
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477436
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Currently, the controllers managed by bdev_ftl are skipped in
bdev_nvme's config_json output by verifying if they support Open
Channel. Since new bdev_ocssd also uses Open Channel controllers and
it relies on bdev_nvme's config_json, additional flag was added to mark
that a controller is used by bdev_ftl.
This is a temporary solution that should be removed once bdev_ftl
becomes a virtual bdev and starts using bdevs instead of NVMe
controllers.
Change-Id: Ib25b61a72f0912d7a51119357f5c221941af50ad
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477297
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
'delay_pcie_doorbel' parameter in 'spdk_nvme_io_qpair_opts' structure
was renamed to 'delay_cmd_submit' to make it suitable for every
transport. Old name is also kept for backward compatibility.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I09ef8028133c4a3d4a5bbc5329ced1f065bcaa46
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Other NVMe bdev modules (e.g. OCSSD) need the definition of the
nvme_io_channel to be able to send IO requests, so this structure has to
be defined in the common header.
Change-Id: I550d15d091078588c6c7ab824d883e049ec5a72c
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470019
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch adds initial Open Channel zoned bdev implementation. The
bdev will allow to use the zoned API on top of OCSSD devices.
Added the ability to create the OCSSD NVMe controller. The controller
is created using the regular NVMe's RPC when the controller is detected
to be Open Channel.
Change-Id: I31d271126dba4369ac2eaebd4cc7bdd460e5f808
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467147
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function can now be easily moved inline to
its single caller.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I55a20dfb9f6cdeee2541b02b63fd5422786c551c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475925
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some namespace types such as OCSSD need to do some additional
operations before being ready to populate bdevs for a namespace.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67a56f1238e70b8d6fa8c4452fec7df3b7fddb03
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is in preparation for making this code path
asynchronous. For now we will just call this function
immediately after calling the per-ns-type populate
namespace function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6e397901b2489287634b1d21e57f92e0abcf48e0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475923
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is in preparation for making this code path asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifd0ca2a997f5d89307deb7ae686480544fb73140
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475922
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is in preparation for making the per-ns-type
populate_namespace functions asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I63176e0d117eb91de82b3f8b68a18de592e0a980
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There's no need to support cb_fn/cb_arg parameters
to bdev_nvme_populate_namespaces. Just have it
call populate_namespaces_cb() directly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9cf5f1f79ea8650b2e82654a0ce770d89e0a06f7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
OCSSD is handled specially now by nvme_ctrlr_populate_namespaces,
so we don't need any extra handling.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I39a9f0a9d14aa8c32c1fda6055e26d8eb712b107
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475919
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some NVMe modes will be creating bdevs by their own.
For such case they have to have a way to add and remove
bdevs to/from controller.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia188ad43695689358569cfd230b6bc39c15efce2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469980
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Rename common remove functions so that they align
with naming convention.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8200c2f916ff45e03fb097c5f78eff0782b96c86
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474248
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a part of changes required by upcoming patch.
This will also require moving bdev_nvme_unregister_cb
function to common.c.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Icc14534db4aec903542a94588d22b0ea9d43f47a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470439
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The OCSSD ones are just nops for now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iab87bd8110dac2ba2f81d056f0034a53818e2b17
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475799
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Let's reuse this function in the remove path, to avoid
some code duplication.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I33519e093dafc71e7ccb6aad40638d33a820a0a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475798
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Now call it nvme_ctrlr_depopulate_namespace, to match
some of the recent renaming.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3953530e3322925ca0b4a5c72bfba4a90cecf35c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475797
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will better match the recent renaming to the
functions associated with this flag.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia7a0f3a50ae59b1d76d66443c91a98dc576f4d09
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475796
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Eventually these may be defined by the NVMe spec, but
for now add something local to the bdev/nvme module.
These will currently only differentiate "standard"
namespaces from ocssd namespaces.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7853c97f3d3c28fd9f2fcd2440c57dc262954b46
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475795
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These basically do the same thing. We'll basically
keep the populate function name, but apply it to the
existing update function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I005e983c86f2f714a240b3ba77bd2ca9463687ee
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475794
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We're going to reuse this code in a more common path
which would raise the visibility of these noticelogs
significantly. These aren't exceptional conditions,
so there's no need to print them when they happen.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1b56e3a4e5603e223bae07dc1c9e1ada03ba5901
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475793
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A controller with no namespaces is perfectly valid.
So remove the noticelog when a controller with no
namespaces is found. This helps reduce some complexity.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ica184f1209414185dd4df3531f3a1002a2899590
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475792
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
