Make vbdev_crypto_destruct() return 1 to signal that program
execution should wait for spdk_bdev_destruct_done() function,
which is added inside _device_unregister_cb().
This change is related to _vdev_dev_get() not being able
to find the devices, when called from _cryptodev_sym_session_free(),
as it uses device driver name, which might already be freed.
This occurs only during bdev module finish, when crypto bdevs
are being unregistered and vbdev_crypto_finish() proceeds to
call bdev name deletion without waiting for the unregister
callbacks to complete, which ultimately results in reading
freed pointers.
This only happens when code execution takes path for DPDK 22.11+.
Change-Id: Id9a43d07c90aef7a82867383fd77354ac521a3e7
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16290
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently delete_crypto_disk() calls spdk_bdev_unregister_bdev_by_name()
and immediately after exiting that function, it proceeds to bdev name
deletion. This causes callbacks triggered by above call to run with
references to bdev names that are partially unavailable due to free()
functions in vbdev_crypto_delete_name().
Add an intermediate callback that will call vbdev_crypto_delete_name()
and then the original callback that was sent as an argument to
delete_crypto_disk(). That way we are sure that bdev name deletion
is performed right after bdev unregister.
Change-Id: I483ce5c3c63596f54d44220ca61c5e97c3807faf
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It was found that if system has no crypto devs,
we exit earlier from init function and don't register
io_device. Later in fini function we may try to unregister
invalid io_device
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I23ac9674c02d4fe97f01c66928a5ec5a2b39ec47
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16321
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is a combination of commits which update vdev_crypto:
110d8411e bdev/crypto: do not create mempool for session private data
495055b05 bdev/crypto: update rte_cryptodev usage for DPDK 22.11
02caed6b5 bdev/crypto: remove mempool usage matching < DPDK 19.02
5887eb321 bdev/crypto: do not track type of crypto session
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I30c4f76e4e7b4865a7daa638d357888bb5e02071
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16039
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The io paths' stat will get lost when they are destroyed. Record
the stat in the nvme_ns structure.
Change-Id: I12fc0b04fac0d59e7465fe543ee733f2822a9cdb
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14744
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added helper functions nvme_ns_alloc() and nvme_ns_free().
This is a preparation for next patch where we will allocate or free
I/O statistics of nvme_ns when this nvme_ns is allocated or freed.
Change-Id: I54b0dba61bd19923178ba4bed97677cf628ba509
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16300
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we have stat per bdev I/O channel, but for NVMe bdev
multipath, we don't have stat per I/O path. Especially for
active-active mode, we may want to observe each path's statistics.
This patch support IO stat for nvme_io_path. Record each nvme_io_path
stat using structure spdk_bdev_io_stat.
The following is the comparison of bdevperf test.
Test on Arm server with the following basic configuration.
1 Null bdev: block size: 4K, num_blocks:16k
run bdevperf with io size=4k, qdepth=1/32/128, rw type=randwrite/mixed with 70% read/randread
Each time run 30 seconds, each item run for 16 times and get the average.
The result is as follows.
qdepth type IOPS(default) IOPS(this patch) diff
1 randwrite 7795157.27 7859909.78 0.83%
1 mix(70% r) 7418607.08 7404026.54 -0.20%
1 randread 8053560.83 8046315.44 -0.09%
32 randwrite 15409191.3 15327642.11 -0.53%
32 mix(70% r) 13760145.97 13714666.28 -0.33%
32 randread 16136922.98 16038855.39 -0.61%
128 randwrite 14815647.56 14944902.74 0.87%
128 mix(70% r) 13414858.59 13412317.46 -0.02%
128 randread 15508642.43 15521752.41 0.08%
Change-Id: I4eb5673f49d65d3ff9b930361d2f31ab0ccfa021
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14743
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Support to specify rr_min_io for multipath round-robin policy,
which makes I/O switches to another io path after rr_min_io I/Os are
rounted to current io path.
Change-Id: I09f0d8d24271c0178ff816fa63ce8576b6e8ae47
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Added helper function bdev_nvme_clear_current_io_path for clearing
current_io_path.
The next patch will clear a new variable of the nvme_bdev_channel
when clearing current_io_path. It is convenient to add a helper
function to clear current_io_path.
Change-Id: I7d445638648ea232fedcbf16736e9c4c73cc9c71
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Support selecting io path according to number of outstanding io of
each path in a channel. It's optional, and can be set by calling
RPC "bdev_nvme_set_multipath_policy -s queue_depth".
Change-Id: I82cdfbd69b3e105c973844c4f34dc98f0dca2faf
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When we submit more tasks than supported by qp,
extra tasks are queued on io_channel. Later completion
poller tries to resubmit these tasks one by one. That
is not efficient since every enqueu_burst may cause
doorbell updates in HW.
Instead add a check for qpir capacity and submit
appropriate number of requests. If qpair is full,
tasks are queued in dedicated list. This approach
should remove or minimize the need to resubmit
individual crypto operations.
This also handles a case where there are no entries
in global pools (crypto_ops or rte_mbuf)
Fixes issue #2756
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Iab50e623e7a82a4f5bef7a1e4434e593240ab633
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15769
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Previously vbdev_crypto used DPDK directly and
the restriction on max IO size was propagated to
generic bdev layer which split big IO requests.
Now, when DPDK code is a standalone accel module,
this restriction on max IO size is not visible to
the user and we should get rid of it.
To remove this limitation, allow to submit crypto
operations for part of logical blocks in big IO,
the rest blocks will be processed when all submitted
crypto ops are completed.
To verify this patch, add a functional test which
submits big IO verify mode
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I0ee89e98195a5c744f3fb2bfc752b578965c3bc5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15768
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Lcov is disable for clang due to being time-consuming. This patch
enabled it for fuzzer only. `llvm-gcov.sh` is a wrapper for llvm-cov
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I96ef6ad4fc4ecb92b063070fd2410ca88209f5b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15356
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move parallel arrays of response buffers and response SGLs from
qpair to a new responses object.
Use options to create the responses object.
Use spdk_zmalloc() to allocate the responses object because qpair
is also allocated by spdk_zmalloc().
The purpose is to share the code and the data structure between
SRQ is enabled and disabled.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Ia23fe7328ae1f2f551fed5863fd1414f8567d602
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Unit tests are already linked with isa-l-crypto if CONFIG_ISAL_CRYPTO is
set, so there's no need to stub them. And by not stubbing them, we can
do tests involving actual encryption/decryption.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I162a2cd26112cc5adb8eeed7336f4280aa4bdb6b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Accel modules can now implement the get_memory_domains() callback to
indicate the types of memory domains they support. If unimplemented, a
module is assumed not to support memory domains and accel will take care
of pulling/pushing data to local buffers prior to passing a task to be
executed by a module.
For now, similarly to the bdev layer, we only check if a module supports
memory domains, but we don't verify the types of the domains. That
could be easily added in the future, if necessary.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia513f4f31124672b705b6dd33a2624f0ae94d3ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16027
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It allows accel to store private data per each opcode/module without
having to change externally visible structures or allocate anything when
a module is registered. Since a single module can service multiple
opcodes at the same time, so some of these values might be duplicated.
However, there are only a handful of opcodes, so it shouldn't be a
problem.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I609a6ccc2d241cb9b8273cc2c6d1933d2bc25e0e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16026
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the destination buffer is in remote memory domain, we'll now push the
temporary bounce buffer to that buffer after a task is executed.
This means that users can now build and execute sequence of operations
using buffers described by memory domains. For now, it's assumed that
none of the accel modules support memory domains, so the code in the
generic accel layer will always allocate temporary bounce buffers and
pull/push the data before handing a task to a module.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia6edf266fe174eee4d28df0ca570c4d825436e60
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15948
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the source buffer is from a remote memory domain, we will now pull it
to the temporary bounce buffer before a task is executed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I476684a4359410c69dd69a2b425b9e61d4c55a7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15947
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The first task on a sequence's task queue is the one that we're
currently executing. By moving the place where we remove it from that
queue and place it on the completed queue to process_sequence(), we'll
be able to perform some extra steps (e.g. memory domain push) after a
task has been completed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia98f491eb52be0156954372461e05c198c070e3b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15946
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Processing a sequence consists of multiple steps and we call
accel_process_sequence() mutliple times, so we need to check various
things to verify if some of those steps have already been done. Having
a state machine allows us to reduce the number of such checks and makes
it easier to add additional steps.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I254819fee0893866de395193041b319cbad228ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15945
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
If a task has buffers in a remote memory domains, we'll now allocate a
buffer from local memory and replace the original buffer with it. This
is the first step in supporting buffers in remote memory domains. To
fully support it, we'll also need to pull/push the data before/after
executing a task.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I3c86bbb6dbe6a31cb2cae8ce7d73e272ddc2734c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15944
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
All operations are using iovecs to describe their buffers and only
encrypt/decrypt additionally used nbytes to store the total size of a
src buffer. We don't really need this value in the generic accel code,
so we can let modules calculate it, if necessary. That way, we won't
waste cycles calculating it if a module doesn't use it and it makes the
code a bit easier, as we won't have to deal with the fact that nbytes is
only valid for certain operations.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I29252be34a9af9fd40f4c7fec9d0a0c1139c562d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16306
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also, since this was the last operation using dst and nbytes, these
fields were removed from spdk_accel_task.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0d6b090e101c016d1bdcbe7a3bee7d6f691f1c9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15943
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also, since this was the last operation using src, remove this field
from spdk_accel_task.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I55fd98697ef4f92a13dd0563b4adf9ccb0af171b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When initializing SPDK, the used DPDK args are printed.
Unfortunately before each argument a timestamp is added.
Rather than use SPDK_PRINTF for each argument, bunch
up whole line to be printed and then print it in one go.
Please see before:
[2022-12-20 13:52:05.647131] [ DPDK EAL parameters: [2022-12-20
13:52:05.647145] spdk_tgt [2022-12-20 13:52:05.647159] --no-shconf
[2022-12-20 13:52:05.647170] -c 0x1 [2022-12-20 13:52:05.647185]
--huge-unlink [2022-12-20 13:52:05.647199] --log-level=lib.eal:6
[2022-12-20 13:52:05.647221] --log-level=lib.cryptodev:5 [2022-12-20
13:52:05.647232] --log-level=user1:6 [2022-12-20 13:52:05.647251]
--iova-mode=pa [2022-12-20 13:52:05.647261] --base-virtaddr=0x200000000000
[2022-12-20 13:52:05.647275] --match-allocations [2022-12-20
13:52:05.647286] --file-prefix=spdk_pid1352179 [2022-12-20 13:52:05.647307]
]
And after:
[2022-12-20 13:52:29.038353] [ DPDK EAL parameters: spdk_tgt --no-shconf -c
0x1 --huge-unlink --log-level=lib.eal:6 --log-level=lib.cryptodev:5
--log-level=user1:6 --iova-mode=pa --base-virtaddr=0x200000000000
--match-allocations --file-prefix=spdk_pid1358716 ]
Change-Id: I4c6c25818ae99bad942bf61ab590f971d339ffc6
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16031
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Implement the resize function for RAID0. raid0_resize() calculate the
new raid_bdev's block count and if it is different from the old block
count, call spdk_bdev_notify_blockcnt_change() with the new block count.
A raid0 bdev always opens all base bdevs. Hence, if the size of base
bdevs are reduced, resize fails now. This limitation will be removed
later.
Add a simple functional test for this feature. The test is to create
a raid0 bdev with two null bdevs, resize one null bdev, check if the
raid0 bdev is not resize, resize another null bdev, check if the raid0
bdev is resized.
test/iscsi_tgt/resize/resize.sh was used a reference to write the test.
Using jq rather than grep&sed is better and hence replace grep&sed by jq
of test/iscsi_tgt/resize/resize.sh together in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I07136648c4189b970843fc6da51ff40355423144
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Recent changes done to iobuf and accel framework
require us to adjust iobuf pool sizes when running
tests with high number of VMs and Vhost controllers.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I1a445379e755939875aebe97a6360ec0b0586287
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16267
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fuzzer logs may become huge, it's better to store it as file.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: Ia85eb88fd648dc2fb90f5a3bd389e6df2ef0106e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15365
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: Id042892837bb328a64447f8b41df8c11bbeeb24b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15336
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Keep corpus directory that trigers new code coverage.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I2a5154472588669fddd87c97cc952da1a92ae0ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Also, make it possible to remove copy operations following a fill
operation if they're using the same buffers.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7da195ce80650a02c5db99d9400ee692f797b1f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15940
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Some of the copy operations can be elided, so they're not the best for
this kind of test. So, use another operation, decompress, that can be
appended to an accel sequence.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic59e7678436bdf1d5ab6eb103de4cc0c0c347b9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also, replace src2 with an iovec + iovcnt and rename it to s2 to
keep the naming consistent with the source buffer (s).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I44787128377addd514818ec5aaec084b1a31f0c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15939
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also, replace dst2 with an iovec + iovcnt and rename it to d2 to
keep the naming consistent with the destination buffer (d).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib394c127eeb5890451535ff485f96f7edd2897a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This patch is first in the series of patches aimed to make all accel
operations describe their buffers with iovecs. The intention is to make
it easier to handle tasks in a generic way.
It doesn't mean that we change the API - all function signatures are
preserved. If a function doesn't use iovecs, we use the aux_iovs array.
However, this does mean that each accel module that provides support for
a given operation will need to be adjusted to use iovecs.
Additionally, update the unit test checking copy elision to verify the
buffers of the copy operation that is left.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I9e6d8d1be3b8b9706cb4a6222dad30e8c373d8fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Users can now specify buffers allocated through `spdk_accel_get_buf()`
when appending operations to a sequence. When an operation in a
sequence is executed, we check it if it uses buffers from accel domain,
allocate data buffers and update all operations within a sequence that
were also using those buffers.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I430206158f6a4289e15f04ddb18f0d1a2137f0b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15748
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Remove app/spdk_lspci as it is used only
for enumerating devices behind VMD endpoints.
VMD is not run in usual set of CI tests due
to lack of adequate hardware, thus spdk_lspci
is never used.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I08c94ff5d17faf6aebf18caed1f985e5304ba9a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16236
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
SPDK CI does not have proper hardware to run VMD
tests or apps for usual set of tests. Moreover,
these examples are not used anywhere in test directory
so they would always have zero coverage.
Change-Id: I5c101d9f8fd6dcb06703efd5d5b4922def05417f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
