per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the 4 digit year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.
Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
Just add a single .gitignore file in test/unit
that covers *_ut. That allows us to eliminate
100 .gitignore files in the test/unit directory
hierarchy.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia190587b4d5c6f1847471be27550cbfb843dc01e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9235
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This mutex is not used anywhere. After removing mutex from struct
spdk_scsi_globals, struct spdk_scsi_globals is empty. Hence then
remove struct spdk_scsi_globals. We can create struct spdk_scsi_globals
again if it becomes necessary.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I749ae43f7735a7c9383d090eae2093bb52607f17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The library itself doesn't need it. The unit tests
do need it, so just include it there.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9aefd303ae12928d45141029436509f185105bd3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7812
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
(Note: this patch was previously applied as b32cfc46 and then reverted
as 63642bef.)
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7739
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reverts commit b32cfc467b.
This commit fails the ABI checks and only got through because the checks
were disabled until 21.04 hit.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id26b8f8ba551193d99b1ccbd31b35378b4095a20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7731
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7310
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.
Starting with this patch literal passed to register,
serves as name for the flag.
All instances of SPDK_LOG_* were replaced with just *
in lowercase.
No actual name change for flags occur in this patch.
Affected are SPDK_LOG_REGISTER_COMPONENT() and
SPDK_*LOG() macros.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I002b232fde57ecf9c6777726b181fc0341f1bb17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Some OS(Windows and VMWARE esxi) will send SPC2 RESERVE/RELEASE
commands when formatting the filesystems, but in our previous
implementation of reservation feature, we didn't add such support,
in specification SPC3/4, they all include one section "Exceptions to
SPC-2 RESERVE and RELEASE behavior" feature for compatible support of
SCP2 RESERVE/RELEASE, so we add this support now.
Fix issue #1414.
Change-Id: I65d85ffb3b8f824b0ae4e130f53f01d95735d700
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Remove spdk_ prefix from the name of internal APIs.
Add single underscore as the prefix of the function name to the
private functions if we see any conflict as a result of this change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If0eabffbdb750db02866c1aa2b29b0c89fab1040
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1824
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
CUnit provides a helper macro CU_ADD_TEST() that
simplifies usage of CU_add_test() function.
Test name no longer needs to be provided,
as it will be inherited from function name.
This is a follow up to
https://review.spdk.io/gerrit/c/spdk/spdk/+/931
Change-Id: I8078f02e08b14f12328ae022d7090ba13fbd64e4
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1239
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch changes the way that unittests initialize.
The new way is shorter and simpler.
It assumes that error during initialization is a fatal error,
but in our cases it always is.
This patch is a followp up to
https://review.spdk.io/gerrit/c/spdk/spdk/+/930
lvol_ut.c is the only test that skipped because
it runs same tests multiple times which is not allowed
by new method.
Change-Id: I0baf7ad09a35d5fca2dc4a03b4453c12c14f38a7
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1238
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
By the recent refactoring, SCSI task is configured when getting
DIF context from SCSI layer. Passing not CDB and offset separately
but SCSI task to SCSI layer is more concise and do in this patch.
In iscsi_send_datain(), we have to update task->scsi.offset for the
case that data is split into a sequence, but the update is no harm
because task has completed what it must to do.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I153352dfa7aa7325db4452f03d863df11b3e0cfa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472510
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Previously, for iSCSI target, freeing bdev_io of SCSI task was deferred
until the reference count of the SCSI task becomes zero.
But this will cause the use-after-free issue when doing LUN hotplug during
large write I/O workload.
The scenario is the following:
- Large iSCSI write I/O is split into multiple I/Os, the first I/O is from immediate,
and subsetquent I/Os are from R2T.
1. The first I/O allocates iSCSI task as primary, and is submitted to the bdev layer.
The first I/O is pending in the bdev layer.
2. The second I/O allocates iSCSI task as secondary (secondary is associated with
primary by incrementing reference count).
3. Before submitting the second I/O to the bdev layer, LUN hotplug is started.
LUN hotplug waits for getting completion of the first write I/O from the bdev layer.
4. The bdev layer completes the first I/O. The primary iSCSI task is tried to free,
but reference count is still one, and is not done yet.
5. LUN hotplug detects completion of the first write I/O, and returns
LUN I/O channel to the bdev layer.
6. The second I/O is tried to submit to the bdev layer, but LUN is already removed,
and so free the secondary iSCSI task.
7. Then the reference count of the primary iSCSI task becomes zero,
and its bdev_io is freed. However, LUN I/O channel is already freed and freeing
bdev_io fails.
This issue is caused by separating iSCSI task allocation and submission.
For write I/O, we don't have to keep bdev_io after getting completion
of it from the bdev layer.
This applies to other non-read I/O types.
So for non-read I/O, free bdev_io after getting SCSI status in
bdev_scsi_task_complete_cmd(), and for read I/O, set bdev_io to
task as same as before.
The next patch will do the same for management task.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I530fb491514880ce41858e1bea55d422d606dfc4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471695
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Like other test, need to add SPDK_CU_ASSERT_FATAL(TAILQ_EMPTY(&g_bdev_io_queue)).
To avoid issue:
scsi_bdev_ut.c:956:2: warning: Address of stack memory associated with local
variable 'task' is still referred to by the global variable 'g_io_wait_queue'
upon returning to the caller. This will be a dangling reference
ut_put_task(&task);
^~~~~~~~~~~~~~~~~~
waiting exit from while loop in ut_bdev_io_flush.
This is related to issue #822.
Change-Id: If390f5076582a0149646f0c2a408c3bcd3b4fab6
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459534
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch uses the change by the last patch to initialize DIF
context in SCSI layer. Besides this patch changes the name of a
parameter from offset to data_offset to clarify the meaning.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I54bf1168ec5959432aa15dae0360c0640138b033
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Data offset are intended to correspond to DATAO in NVMe/TCP and
Buffer Offset in iSCSI.
Previously for iSCSI, buffer offset had been merged to start block
address, but passing buffer offset separately from start block address
clarifies the logic more.
On the other hand, for NVMe/TCP, passing DATAO separately from start
block address will be critically important because DATAO will bave any
alignment and will be necessary to use for not only reference tag
but also guard computation.
This patch adds data_offset to struct spdk_dif_ctx and adds it to the
parameters of spdk_dif_ctx_init(). ref_tag_offset is also added to struct
spdk_dif_ctx and it is computed by dividing data_offset by data_block_size
and is used to compute reference tag.
The next patch will use this change when getting DIF context in SCSI.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0e12ca9b1dc75d0589787520feb0c2ee0f844a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To establish a persistent reservation the application client shall first
register an I_T nexus with the device server. An application client registers
with a logical unit by issuing a PERSISTENT RESERVE OUT command with REGISTER
service action or REGISTER AND IGNORE EXISTING KEY service action.
Specify Initiator Ports (SPEC_I_PT) bit and All Target Ports (ALL_TG_PT) bit
are not supported for now, the registrants belong to the I_T nexus who sends
the command.
Also Activate Persist Through Power Loss (APTPL) bit will be supported in
following patches.
Change-Id: If057a764a4bfa73017f98048c94b697dbfa4b4a1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436088
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK iSCSI target didn't convert LUN ID from integer to structure
when it sends R2T PDUs. The next patch will fix the issue. Introducing
helper functions into SCSI library and using them will be clean. Hence
this patch adds two helper functions to convert LUN ID between structure
and integer.
The logic of helper functions is derived simply from the current
implementation in SPDK.
Change-Id: I114b546cfcb44109d6cd131a1fa972f4d6bfea38
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds an API spdk_scsi_bdev_get_dif_ctx().
spdk_scsi_bdev_get_dif_ctx() decodes opcode in CDB, and if opcode
is read or write block commands, it gets LBA and use the lower
32bits of LBA as Reference Tag. It gets DIF information from
specified bdev next. Then it sets all to DIF context and return.
spdk_scsi_bdev_get_dif_ctx() is exported to iSCSI through
spdk_scsi_lun_get_dif_ctx().
Change-Id: Id8aac164c48e9e9d4ff7cfc9fa81bb5090f3e187
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446224
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
SPDK iSCSI and SCSI target don't expose any metadata and DIF settings
to the corresponding iSCSI and SCSI initiator.
Even when SPDK iSCSI and SCSI target allocate any bdev formatted
with DIF, SCSI commands sent from iSCSI and SCSI initiator don't
have any metadata and DIF information.
For that case, iSCSI target inserts and strips DIF on behalf of
iSCSI and SCSI initiator.
Hence SPDK SCSI target has to use data block size not including
metadata to process SCSI commands correctly.
This patch replaces spdk_bdev_get_block_size by
spdk_bdev_get_data_block_size in necessary places.
Change-Id: I264c8e532d1d1b016f6d8774c8ec03389528044f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is in a effort to consolidate SCSI read and write I/O
for the upcoming transparent DIF support.
Previously conversion of bytes and blocks are done both in
SCSI layer and BDEV layer. After the patch series, conversion is
consolidated into SCSI layer.
Change-Id: Ib964a41ec22757f2a09cea22f398903f78d0781f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is in a effort to consolidate SCSI read and write I/O
for the upcoming transparent DIF support.
Previously conversion of bytes and blocks are done both in
SCSI layer and BDEV layer. After the patch series, conversion is
consolidated into SCSI layer.
About conversion from bytes to blocks, we don't expose bdev API
spdk_bdev_bytes_to_blocks and but create private helper function
_bytes_to_blocks because we will use not block size but data
block size when we support transparent DIF feature.
Change-Id: I37169c673479c92e027e2507a0e54a1e414b43e1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444778
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Also remove some unneeded stubs since the thread
library is linked by default to all unit tests.
Note that the lun.c unit tests include test_env via
the new include of ut_multithread.c. It needs ut_multithread
to simplify allocation of threads needed so that the lun.c
code can safely register pollers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I922b5fed12ff7e2802b19d7f953c1b2352800f73
Reviewed-on: https://review.gerrithub.io/c/432919
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
mk/spdk.unittest.mk already includes mk/spdk.common.mk, so it's
not needed. This also fixes an issue where touching an included
.mk file would not trigger unit tests to rebuild if they had
this duplicated mk/spdk.common.mk include.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I41a04eb77ce468849cb9b53bd1f76df6fec06e46
Reviewed-on: https://review.gerrithub.io/c/443980
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
spdk.unittest.mk includes spdk.app.mk, but some unit test
Makefiles include both spdk.unittest.mk and spdk.app.mk,
meaning spdk.app.mk gets included twice. Fix that.
This hasn't been an issue because spdk.app.mk currently
only includes variables - but no rules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23d39e8084f79442fb06ae9b5a6a68d6134adff4
Reviewed-on: https://review.gerrithub.io/434281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Current SPDK SCSI supports only LUN RESET in task management function.
Upcoming patches will support other functions too but differentiate
the callback function about LUN reset from other task management
functions for now to avoid misunderstanding.
Change-Id: If8f00ce413fbcc54b12dd885cbf01597f83a2af9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434763
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
I had to make small modifications to one test in the dev_ut.c file to
prevent a memory leak error. However, changing the index in this test
from -1 to 0 has no effect on the coverage.
Change-Id: Ia8a475aaa41118f072a5d9006bab9d9c84b4a10a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424126
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New function was added in bdev layer to allow
handling spdk_bdev_io buffer exhaustion.
This patch adds that functionality to scsi bdev.
Change-Id: Ia6a5be871ae09a4d1166991925f0a44f3b355bdd
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417032
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds UT for IO operations, as preparation for
next patch in series handling bdev_io buffer exhaustion.
Change-Id: I139cb8811453576efd1acddd15ad2a3672995f09
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417452
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously when IO was sent to bdev, even without callback yet,
status for task was set to SPDK_SCSI_STATUS_GOOD.
This patch changes it so that it is only set when callback actually
comesback from bdev via spdk_bdev_io_get_scsi_status().
Change-Id: I4a36ec345608257123e1036d31540f5f1090a23b
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417708
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Originally task was memset to 0, meaning that some asserts might have
incorrectly asserted values that were set to 0 beforehand.
Now ut_init_task() sets task to 0xFF, with only couple required fields set to
appropriate values.
Change-Id: I47fbb03daf6ab7cbf60abc58f63315a151e49890
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417686
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Callbacks were never called in UT for scsi_bdev.
Change-Id: I54a9d75af3161cd4dd4f0c153c7808b13e818576
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417551
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To make it clear that spdk_put_task() and spdk_init_task()
are not part of public API, chaged prefix to ut_.
Change-Id: I76a6efc3835f0ee71953029cad1dabf5a68013a4
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417685
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_bdev_read() bdev function is not used
in scsi library. No need to stub it.
Change-Id: I7c142c59c5e64ae9ecfabaf0c73a9b0e68fffd04
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417550
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move the status field into the internal structure.
Change-Id: Icf96436925dd829ee89d2491ef55e337823be6fb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/416057
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change the checks to asserts instead. No callers ever
checked the return codes, and if they did, there's
nothing they can do to recover from an error status.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96d6804d61dfbf6030b3cc78ea59981301417421
Reviewed-on: https://review.gerrithub.io/415539
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Instead of silently truncating overly-long SCSI dev names, add an
explicit check and return an error if the name is too long.
Since we now calculate the length of name up front, this also allows
simplification of the copy into dev->name.
This also ensures that dev->name will always be zero-terminated, so we
can simplify the strnlen() in spdk_bdev_scsi_pad_scsi_name() to a
strlen() and remove the invalid unit test case for padding names longer
than SPDK_SCSI_DEV_MAX_NAME.
Change-Id: I54de00bac062a142a10c41cfa2aec19d7969dff0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406990
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5ec4b2e1421a1b0ba5ad005d5376a1a556ea4d7b
Reviewed-on: https://review.gerrithub.io/399749
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Retrieve LUN data directly from struct spdk_scsi_lun rather than copying
them into struct spdk_scsi_task, and access the LUN via the task->lun
pointer.
Change-Id: Id8745f116bc559fb2f9e58811c2b9781c8cbdae8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393709
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
it appears that scsi name string designator
format in SPDK is not correct. The name strings
are not null terminated (which causees garbage
to appear in scsi_inq -p 0x83). Further, they
are not padded correctly.
SCSI port name and device name strings must be null
terminated. Further, the length must be a multiple
of 4 bytes, and must be padded with 0s.
See SPC-5 Section 7.7.6.11.
Change-Id: Id7c4ad27e5c3a17ad68e5e466142801c0d03b1f2
Signed-off-by: Karandeep Chahal <devilsgrotto@gmail.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/393027
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use spdk_bdev_unmap_blocks() in place of spdk_bdev_unmap(), since the
SCSI UNMAP descriptor already natively operates in blocks rather than
bytes.
Change-Id: I16a0c38d203cf5f60484229e7872783b11d8de6e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Use spdk_bdev_flush_blocks() in place of spdk_bdev_flush(), since the
SCSI SYNCHRONIZE CACHE command already natively operates in blocks
rather than bytes.
Change-Id: I11810948fb8d0b6b911d48620e2a363f767cc7f7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
