This patch adds the framework for a discovery
service in the bdev/nvme module.
Users can specify an IP/port of a discovery service.
The bdev/nvme module will connect to a discovery
controller, get the discovery log page, and then
register for AERs. It will connect to each
subsystem specified in the initial log page.
AER completions will trigger fetching the log
page again, at which point new subsystems will
be connected to, or removed subsystems will be
detached.
This patch does the following:
* Adds the new start_discovery RPC
* Connects to the discovery controller
* Gets the discovery log page
* Registers for AERs
* Detach from discovery controllers at shutdown
Subsequent patches in this series will:
* Connect to subsystems listed in discovery log page
* Detach from subsystems that were listed in earlier
discovery log pages but subsequently removed
* Add a stop_discovery RPC
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I54bfa896a48c5619676f156b5ea9f2d1f886c72f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10694
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The failover_in_progress flag is used to decide the return value of
bdev_nvme_failover().
bdev_nvme_delete() calls bdev_nvme_failover() with remove=true to remove
nvme_ctrlr->active_path_id. However bdev_nvme_failover() returns zero
if nvme_ctrlr->failover_in_progress is true. bdev_nvme_failover() may
return zero even if it does not remove nvme_ctrlr->active_path_id.
The following will be better.
bdev_nvme_failover() returns -EBUSY if nvme_ctrlr->resetting is true,
and the caller repeats calling bdev_nvme_failover() until the target trid
becomes alternative path or bdev_nvme_failover() returns zero.
To do that, the failover_in_progress flag is not necessary any more.
Removing the failover_in_progress will also simplify the following
patches to unify ctrlr reset and failover.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I57ab944beb1d06ea4def144c81c69705860de35f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10441
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We had not checked the bit 0 of the Namespace Multipath I/O and
Namespace Sharing Capabilities (NMIC) field in the Identify Namespace
data structure.
If the bit 0 of the NMIC is zero, it is likely that namespaces are not
identical.
We should check if the value of the NMIC first, and do it in this patch.
Additionally, it is not usual if the bit 0 of the CMIC and the bit 0 of
the NMIC do not match. So in unit tests rename the parameter multi_ctrlr
by multipath for ut_attach_ctrlr() and use it for the value of the NMIC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6aa7cbcc99be2507dbf18930f7b585a9ea7d0f90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10380
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Replace the spdk_nvme_ctrlr_reset_async() and spdk_nvme_reset_poll_async()
calls by the spdk_nvme_ctrlr_disconnect(), spdk_nvme_ctrlr_reconnect_async(),
and spdk_nvme_ctrlr_reconnect_poll_async() calls in a reset ctrlr
sequence.
spdk_nvme_ctrlr_disconnect() can fail if ctrlr is already resetting or
removed. But both cases are not possible. reset is controlled and the callback
to the hot remove is called when the ctrlr is hot removed. So we assume
spdk_nvme_ctrlr_disconnect() always succeed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1299e198597b2a2110f80b9a868e2dae015682ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10092
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The originally detected problem is that SPDK NVMf target fails command
with invalid opcode with status code INTERNAL_DEVICE_ERROR instead of
INVALID_OPCODE. All unknown commands on IO queue are passed to
underlying block device layer as NVME_IO type. It is not checked if
this type of commands is supported and, when command fails,
INTERNAL_DEVICE_ERROR is set as status code. If command fails on
submission, status code is set to INVALID_OPCODE which is more
relevant.
This patch adds check if command type is supported to
bdev_nvme_*_passthru functions. If not supported, it is failed with
ENOTSUP.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I4d7f7639da17dd3b1dc3eee7eb1b4a4f876117a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
In the following patches, we want to retry reconnect if reconnect failed
in a reset ctrlr sequence but we want to delay the retry. While
we wait the delayed retry, we want to quiesce ctrlr completely.
As part of quiesce ctrlr operations, we want to pause adminq poller but
we need to do it on the nvme_ctrlr->thread.
If a reset ctrlr sequence runs on the nvme_ctrlr->thread, we can avoid
redirecting the pending destruct request at completion too.
So we redirect the reset ctrlr sequence into the nvme_ctrlr->thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I538b962e2a7b5cf00ebbac2a1e888482ddeeee61
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10075
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In the following patches, bdev_nvme_reset() will execute the reset ctrlr
operation on the nvme_ctrlr->thread until completion as bdev_nvme_admin_passthru()
does. Hence change the callback bdev_nvme_reset_io_continue() to
redirect to the orig_thread by using bio. Furthermore, use bio->cpl.cdw0
to store the completion status of the reset processing. bdev_nvme_reset()
does not use bio->cpl.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I361cc44494190ba83ad6e360788d78851416c46c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10074
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch supports admin passthrough retry when we get any error
with DNR=0 but ABORTED_BY_REQUEST up to retry_count times.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1bf29570791fdbe8651fa70c4c8685bb740fb86b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9944
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When resetting ctrlr, adminq is disconnected first. If adminq is disconnected,
admin passthrough request is rejected with -ENXIO.
But resetting ctrlr may succeed. If resetting ctrlr succeeds, adminq is
connected again, and admin passthrough request will be
submitted successfully.
On the other hand, if ctrlr is failed, admin passthrough request is
rejected with -ENXIO. But when resetting ctrlr, ctrlr is set to unfailed.
Hence bdev_nvme_admin_passthru() skips any ctrlr which is resetting
or failed, and calls bdev_nvme_admin_passthru_complete() with -ENXIO
if no available ctrlr is found.
bdev_nvme_admin_passthru_complete() queues admin passthrough request
and retry it one second later if ctrlr is resetting.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic748dc4faf29ebf717ae5c29dcf7c55fe2ea9243
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9942
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The NVMe bdev module queues retried I/Os itself now.
bdev_nvme_abort() needs to check and abort the target I/O if it
is queued for retry.
This change will cover admin passthrough requests too because they
will be queued on the same thread as their callers and the public
API spdk_bdev_reset() requires to be submitted on the same thread
as the target I/O or admin passthrough requests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If37e8188bd3875805cef436437439220698124b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9913
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
After multipath feature is supported, one bdev will have more than one
nvme ctrlr. Fore ease of view, display each ctrlr's trid info.
Moreover, rename nvme_bdev_ctrlr_get as nvme_bdev_ctrlr_get_by_name here
to keep consistent with nvme_ctrlr_get_by_name.
Signed-off-by: Kai Li <lik271@chinatelecom.cn>
Change-Id: I417506699bbea6ed13dac0fee942749757d2ae47
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10129
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the bdev-zone API, there are a few functions that takes a zone_id:
spdk_bdev_get_zone_info(), spdk_bdev_zone_management(), and the
spdk_bdev_zone_append() functions.
The way a zoned application is usually written is that it starts off
by getting the zone report for all zones (zone_id will be sent in as 0),
and then the application will keep the whole zone report in memory.
Therefore, an application usually have access to the zone_id/zslba for
all zones. However, there are cases, e.g. when getting an error on write,
where the completion callback will only have the lba of the write that
failed.
Add a helper function that can be used to get the zone_id/slba for a
given lba. Having this helper in bdev-zone will avoid SPDK applications
needing to provide their own implementation for this.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I978335f87f7d49bc33aed81afcaa6d9f0af8a1e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10180
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
verify_io() keeps track of a buf pointer, but the
buf pointer never actually gets used. So remove
this buf pointer.
Found by clang-13.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I79dfeac7f004b56f7d4404f41b2ff18b96968a20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10056
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If I/O got ANA error, ANA state may be out of date. So in this case
read ANA log page and update ANA states. Mark nvme_ns to be updating
to avoid using while updating ANA state.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia43d38b3a589c84d6d0479dedcced033e76fb194
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9458
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If an I/O failed by ANA error, the corresponding ANA state might be
out of date. In the following patches, for this case, read the latest
ANA log page and update the ANA state. Such reading ANA log page may be
done on multiple threads concurrently including AER ANA change.
Hence protect ANA log page by adding an new flag ana_log_page_updating
to struct nvme_ctrlr and using it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8bb84091d50a5fdc0d9893b585be972dfd31c0f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9526
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add bdev_retry_count to spdk_bdev_nvme_opts and retry_count to
nvme_bdev_io, respectively.
Set type of both to int because we want use -1 for infinite retry.
Set the default value of bdev_retry_count to zero for the backward
compatibility.
bdev_retry_count is configurable by the RPC bdev_nvme_set_options.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9bc746fcea54aa8722c76f79c70c2ae2b375aa53
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9864
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The previous patch supported I/O retry when no available io_path
was found at submission.
This patch supports I/O retry when we get I/O path error at completion.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I93a1664944b15ab0a826a321e2ea7a2574263afe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9850
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If ANA state is inaccessible or qpair is disconnected, I/O cannot
be submitted.
But if qpair is connected, ANA state may become accessible, or if
qpair is disconnected, it may become connected via resetting.
Hence even if find_io_path() returned NULL, queue I/O and retry it
one second later if qpair is connected or ctrlr is resetting.
Sort retried I/Os by expiration values in ticks, and activate a timed
poller per nvme_bdev_channel only if there is any retried I/O. So
the poller function bdev_nvme_retry_ios() always returns BUSY because
if the poller runs earlier than the closest retried I/O or runs when
there is no retried I/O, it is more like a bug of the framework.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id28110a0d63ebc1c5772814e2ff8a47934df1644
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9830
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If NN is very large this saves a lot of memory. This lookup is
not generally used in the I/O path anyway.
Change-Id: I98e190006843ad5d0bac8483bf9feb800d4a665a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9884
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In the SPDK NVMe driver, spdk_nvme_ctrlr_reset_async() sets
ctrlr->is_failed to false and spdk_nvme_ctrlr_reset_poll_async() sets
ctrlr->is_failed to true if it fails.
On the other hand, in the unit test for the NVMe bdev module,
the stub for spdk_nvme_ctrlr_reset_async() does nothing and
the stub for spdk_nvme_ctrlr_reset_poll_async() sets ctrlr->is_failed
to false if it succeeds.
This bug made us very difficult to write unit test for I/O retry.
Hence fix this bug.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic0dcf1109ce543a53fca74708fc86c8c74a17692
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9829
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_nvme_find_io_path() selects an io_path whose qpair is connected
and ANA state is optimized or non-optimized.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I79c978795562b606ee27aa43020684d8bcbf50c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9405
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reset all controllers of a bdev controller sequentially. When resetting
a controller is completed, check if there is next controller, and
start resetting the controller.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I169a84b931c6b03b36bb971d73d5a05caabf8e65
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7274
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously the NVMe bdev module had completed the outstanding reset and
then canceled pending resets. This was complex.
On the other hand, the generic bdev layer cancels pending resets
and then completes the outstanding reset.
Following the generic bdev layer simplifies the code and makes us easier
to control retry reset, delay retry reset by a few seconds, or stop retry
after repeated failures and then delete ctrlr.
Update unit tests accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9a68422918ebcb052b3a281316ffba9b3450ecd4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9816
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_nvme_admin_passthru() chooses the first ctrlr which is not failed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If41a1d1e1bde4bddfa92e5a385509daa3f0ce4de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9525
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We have io_path structure now and returning io_path rather than
ns and qpair match the function name. The following patches will
cache the returned io_path into nvme_bdev_io.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5d773da18591fc324667f6b5c489a38f497bf3d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9295
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes the critical limitation that ctrlrs which are
aggregated need to have no namespace. After this patch, we can
add multiple namespaces into a single nvme_bdev.
The conditions that such namespaces satisfy are,
- they are in the same NVM subsystem,
- they are in different ctrlrs,
- they are identical.
Additionally, if we add one or more namespaces to an existing
nvme_bdev and there are active nvme_bdev_channels, the corresponding
I/O paths are added to these nvme_bdev_channels.
Even after this patch, ANA state is not utilized in I/O paths yet.
It will be done in the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I15db35451e640d4beb99b138a4762243bee0d0f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8131
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Specifying only a transport id is not enough. We need to be able to
describe the host parameters too.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Iadbea553aee4b38e7cacab0b486e7e5746d0d1ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9825
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is the currently active path identifier in a failover scenario. The
path is defined by more than just the transport identifier, so fix the
name.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I682c6f4c54f75307e2615bf80e70358180d99fe2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9576
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This defines a unique path between a host and a target.
Change-Id: Ia3d24c1b34199a8b596aaf17900ca9694a9da77d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9505
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Call rte_cryptodev_close() to free qpair memory instead of using
an internal function.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I1bd7f0dd86de83f278f6be3263cdf3fbd8e1c77f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9720
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch replaces the synchronous `spdk_nvme_detach()` calls with its
asynchronous counterparts in the controller unregister path.
An additional poller is introduced to periodically poll the NVMe driver
for detach completion. Once the detach is completed, the poller is
unregistered and the nvme_ctrlr is destroyed. The poller uses the same
period (1ms) as the async probe poller.
Since reset and detach cannot happen at the same time, reset_poller was
renamed to reset_detach_poller and it can now store the pointer either
to the reset or detach poller, depending on the circumstances.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5eb2dd6383d98d25d1f9748af08c1a13d18acb0e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8729
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It can match by any provided parameter to remove paths.
Change-Id: I5e7a87342bbb90943dc97fb52f142814fcf0acfa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9453
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Instead of storing an spdk_nvme_transport_id, store the object that
contains it. This will make a few later patches easier.
Change-Id: I36b74889fe39af3b7ab2b900fb3ea4b3f39e1f83
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9484
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Allow to return more than one memory domain.
This change aligns bdev and nvme API and provides
more flexibility for custom transports.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ica9b12ad8463c361be6cb62ee2c0513eec0b486d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9546
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch enables us to aggrete multiple ctrlrs in the same NVM
subsystem into a single bdev ctrlr to create multipath.
This patch has a critical limitation that ctrlrs which are aggregated
need to have no namespace. Hence any nvme bdev is not created.
However it will be removed in the next patch.
The design is as follows.
A nvme_bdev_ctrlr is created to aggregate multiple nvme_ctrlrs in
the same NVM subsystem. The name of the nvme_ctrlr is changed to be
the name of the nvme_bdev_ctrlr.
NVMe bdev module has both the failover feature and the multipath
feature now. To choose which of failover or multipath to use, add an new
parameter multipath to the RPC bdev_nvme_attach_controller.
When we attach a new trid to the existing nvme_bdev_ctrlr, we use the failover
feature if multipath is false, we use the multipath feature if multipath is
false.
nvme_bdev_ctrlr has a list for nvme_ctrlr and it is guarded by the
global mutex. Callers can query nvme_ctrlrs from a nvme_bdev_ctrlr via
trid as a key. nvme_bdev_ctrlr is not registered as io_device.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I20571bf89a65d53a00fb77236ad1b193e88b8153
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8119
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previously, if an I/O qpair is disconnected, we tried reconnecting
the qpair. However, this reconnect operation was very likely to fail
and will not match the upcoming asynchronous connect/reconnect
operation. We need an extra callback to make this reconnect operation
asynchronous, but we do not want to have it.
Hence if an I/O qpair is disconnected, we free the I/O qpair and then
reset the corresponding nvme_ctrlr immediately. If the admin qpair is
also disconnected, the nvme_ctrlr is reset immediately. However this
event may never happen. So we do not wait for the error of the admin
qpair.
The NVMf host may disconnect connections by itself intentionally.
In this case, resetting the nvme_ctrlr will surely fail. But resetting
the nvme_ctrlr frees all I/O qpairs of the nvme_ctrlr and these I/O
qpairs are not created again until resetting the nvme_ctrlr succeeds.
Resetting the nvme_ctrlr once at most is more efficient than repeating
reconnecting the I/O qpair. So this change is valuable even for such
intentional disconnection. However, it is helpful to know the event that
I/O qpair is disconnected. Hence change DEBUGLOG to NOTICELOG in the
disconnected callback. The disconnected callback is not repeated, and
we do not need to worry about NOTICELOG flooding.
Refine the unit test case to verify this change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I376b749c2f55d010692bf916370e8bb4249b795f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9515
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In unit tests, spdk_nvme_ctrlr had opts but did not use it.
Hostnqn will be checked to determine if multipath can be created.
Hence we implement the stub spdk_nvme_ctrlr_get_default_ctrlr_opts()
and copy probe_ctx->opts to ctrlr->opts as we do in lib/nvme.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I13980424d5f463877eae7f7cd1e5ffcae888aebe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9333
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously bdev_nvme_reset() returned -EBUSY if ctrlr is being
destructed and returned -EAGAIN if ctrlr is being reset.
These did not match what spdk_nvme_ctrlr_reset() returned.
Reset operation will be more important than current when multipath
is supported and reset operation is made asynchronous.
Hence change bdev_nvme_reset() to follow spdk_nvme_ctrlr_reset().
bdev_nvme_reset() returns -ENXIO if ctrlr is being destructed and
returns -EBUSY if ctrlr is being reset.
Additionally change the return value of bdev_nvme_failover()
accordingly. After the change bdev_nvme_failover() returns -ENXIO
if being destructed and returns -EBUSY if ctrlr is being reset.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie2c6f8601050b1043d83de9cf01490751784e4e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8859
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following the last patch, include hostid into ctrlr_opts rather than
passing it as a parameter for bdev_nvme_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0d04db1c5767ec76a9a7cd255c3a8d56b0b8f583
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9344
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This only existed to share code between OCSSD and regular NVM
namespaces. Now OCSSD is gone, so just merge the files into bdev_nvme.
Change-Id: Idb73cc05d67144de5dd20af8db24c8f6974d10a7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9337
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvme_ctrlr_populate_namespaces
Avoid relying on this number. Different targets have interpreted its
meaning in different ways and it cannot be used anymore in practice. It
may also be very, very large.
Change-Id: I94e8eae49d6ccdbd8be302b30a120d89242b6d39
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9316
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Try to use these accessors instead of directly using the namespaces
array. This will make changing the data structure easier later on.
Change-Id: I3367d0e0065894f3aa199ed1698d27976b4cbbb5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9315
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If the number of namespaces is very large, this can cause excessive
memory allocation. This is especially true because when the number of
namespaces is large, it is almost always very sparsely populated.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I27d94956c222ae3c49c6a7422164ae3a8ec8d963
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9302
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When preparing for a reset, use this new call to tell
the driver to avoid sending DELETE_CQ/SQ commands to a
PCIe controller when they aren't needed.
Fixes issue #2073.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9ebb7d5c3f7cbb1c3192f162f32edbbea41acde1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9250
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Matt Dumm <matt.dumm@hpe.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
As far as we're aware, this is not in use by anyone. OCSSD has largely
been replaced by ZNS and no OCSSD drives made it to the market.
Change-Id: I020ee277da5292f8c4777f224acafd87586f8238
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_nvme_create() is called only by a single caller and hostnqn is
just copied to ctrlr_opts even if it is passed separately.
Hence include hostnqn into ctrlr_opts rather than passing it as a
parameter for bdev_nvme_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I75b640bcecefa94950b0c19936fab0571c428125
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9332
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe bdev module will have two similar features, multipath and
failover when it supports multipath.
Take a case that we add two different trids with the same name by the
bdev_nvme_attach_controller RPC as an example.
The failover adds secondary trid to an existing nvme_ctrlr. The multipath
feature creates another nvme_ctrlr and adds it to the same nvme_bdev_ctrlr
which has an existing nvme_ctrlr.
We want to use bdev_nvme_attach_controller for both failover and multipath.
To do it cleanly, separate callback to spdk_nvme_connect_async() between
creating ctrlr and setting failover.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id9bc175af6201cdd74e12d4903fc81afe4f91189
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9225
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch makes use of async_fini_start flag to
make fini_start asynchronous.
During this time all lvol stores which have no open
lvols are unloaded. This is required, since lvs
holds claim on the underlying bdev.
Fixes#1630
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If443cb087324d08a4a70df71c7afd930ab654f90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9095
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Callback for bdev modules is called 'module_fini',
meanwhile after its execution bdev modules were to call
'spdk_bdev_module_finish_done()'.
This function carries incorrect name, so it was deprecated
and replaced with 'spdk_bdev_module_fini_done()'.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9a12dff746ea8b4b1570a3794470f7b24e29003e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9148
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Just add a single .gitignore file in test/unit
that covers *_ut. That allows us to eliminate
100 .gitignore files in the test/unit directory
hierarchy.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia190587b4d5c6f1847471be27550cbfb843dc01e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9235
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Once bdev finish starts, bdev unregister is called on all
unclaimed bdevs. This means that for lvs with at least one
lvol present, there will be a corresponding bdev unregister.
Yet the vbdev_lvol module does not attempt to unload the lvs,
once last lvol from that lvs is unregistered. Leaving
the base bdev for lvs claimed.
This patch fixes that by using fini_start callback from
bdev_module to mark when shutdown begins. After that
last lvol unregistered on lvs will unload it.
Expanded struct lvol_bdev to contain lvol_store_bdev.
Closing the lvol will free spdk_lvol, so lvol->lvol_store cannot
be accessed.
Changed ut_lvol_destroy UT to ut_bdev_finish. Previous UT didn't
really test vbdev_lvol_destroy, but 'hotremove' of the lvol bdev.
In effect there is no hotremove of the lvol bdevs (only lvs bdev).
spdk_bdev_unregister() can only be called from within vbdev_lvol,
or during bdev module finish.
This UT will now check the bdev module finish.
Note that at this point lvs with no lvols will not trigger
lvs unload. Next patches in series will introduce async fini_start,
to allow for the unload.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8f51e8c1fcfdc55a5d090a3bc84ccefda813aef8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9093
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Instead of calling vbdev_lvol_unregister() hooked up
to the destruct callback, use spdk_bdev_unregister()
directly.
The spdk_bdev_unregister() is always asynchronous
and callbacks are delayed until spdk_bdev_destruct_done().
This is now corrected in the stubs.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I50683c71be80b1baa8bf3b39a05ca631ac527c2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9155
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The new API is used if bdev ext_opts is not NULL.
Change-Id: I414b5d19bff54114d6708efed89ba19b5955f56a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
In bdev_nvme_reset_ctrlr(), get a controller reset context and start
a poller that calls spdk_nvme_ctrlr_reset_poll_async() to perform the
controller reset asynchronously.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I1e3ae42291c3b43b69c99ca56997dc1965c3ac59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Create a single nvme_bdev_channel for each nvme_bdev and each SPDK
thread. nvme_bdev_channel has a pair of nvme_ns and nvme_ctrlr_channel.
The pair of nvme_ns and nvme_ctrlr_channel will be aggregated by
nvme_ns_channel in the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I095a2d6afa4ea23a87e4452b2f9d4c7e0087abe0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6605
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
When ANA change event is notified, increment reference count, read
ANA log page, and parse it to update ANA states of namespaces.
Then remove the spdk_nvme_ns_get_ana_state() call and its stub in
unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I254ae6cb993694bf0d7f4fa4b1039b5f9243b5cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8335
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If ctrlr supports ANA log page, nvme_ctrlr allocates a buffer for ANA
log page and read ANA log page itself, and then each nvme_ns sets its
ANA state by parsing ANA log page.
Most code was brought from NVMe driver because NVMe driver already
supports ANA log page management. However it had a bug that assumed
each descriptor is 8-bytes aligned. Fix the bug together in this
patch. Besides, the implementation in NVMe driver was synchronous.
NVMe bdev module reads ANA log page asynchronously instead.
The next patch will support ANA log page update by AER handler.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib8eab887633b043b394a45702037859414b8e0a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8318
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reset requests from the upper layer will reset the underlying
ctrlrs of a bdev ctrlr but internal reset requests will reset only
the specified ctrlr.
To clarify such difference, rename bdev_nvme_reset() by
bdev_nvme_reset_io() and remove the underscore prefix from
_bdev_nvme_reset() and related functions.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9a2d124f6e2039bfecfdd6599827354d6c373f2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will reduce the size of the following patches and improve the
readability.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2ff5a10622141466d6a0352b2a6387b1412cfbf8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8641
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Create an nvme_bdev by adding namespace to an attached controller,
and use bdev_nvme_submit_request() in the test case test_pending_reset().
This will reduce the size of the following patches and will increase
the test coverage.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb05952a53949e12562e9be3f6526b0f8ad57696
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8640
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This object is per I/O path and will be aggregated by an new upper
layer object.
Hence rename nvme_bdev_ctrlr by nvme_ctrlr. Then the following patches
will add nvme_bdev_ctrlr as a different upper layer object.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ieed634447785cc98140b3d49c52a2c753988ece7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8381
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This object is used for failover and per I/O path. A controller may
have multiple of this object. A controller is per path and may be
aggregated by an new object. Hence this object is a lower layer
object.
Based on the new naming rule, rename nvme_bdev_ctrlr_trid by
nvme_ctrlr_trid.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0d5e5812560a6947a0c25af05dea168e8745130e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8380
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
This object will be aggregated by the upper layer object nvme_bdev.
Hence based on the new naming rule, rename nvme_bdev_ns by nvme_ns.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I96a70213b29fb53437acd080a0787ec9f5a6759a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We will name the lower level objects starting with nvme_* and the
upper level objects starting with nvme_bdev_*.
This object is a channel per ctrlr and another new channel will be
added on top of this object.
Rename nvme_io_path by nvme_ctrlr_channel based on the new naming rule.
nvme_io_path will be used for a new object which is used to find an
optimal I/O path and to reset multiple ctrlrs sequentially when
multipath is supported.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1d4fa6d4625de3413d629a1ff412e00de12dfaf4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
NVMe specification defines namespace identification descriptors i.e.
EUI64, NGUID, UUID.
BDEV abstracts NVMe specific details that is why only UUID is exposed,
however if NGUID is supported it is prefered to identify namespace
with NGUID over UUID.
If NGUID is not supported by NVMe Controller then fallback to UUID.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: If51889a3664c0daa7cbe983048231793e3c502e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Fixed warnings produced by gcc-11:
compress_ut.c: In function ‘test_compress_operation’:
compress_ut.c:726:9: warning: ‘_get_mbuf_array’ accessing 32 bytes in a region of size 24 [-Wstringop-overflow=]
726 | _get_mbuf_array(exp_src_mbuf, &g_expected_src_mbufs[0], SPDK_COUNTOF(exp_src_mbuf), false);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compress_ut.c:726:9: note: referencing argument 1 of type ‘struct rte_mbuf **’
compress_ut.c:430:1: note: in a call to function ‘_get_mbuf_array’
430 | _get_mbuf_array(struct rte_mbuf *mbuf_array[UT_MBUFS_PER_OP_BOUND_TEST],
| ^~~~~~~~~~~~~~~
Fixes issue #2013.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I04d0182169e61e87401f93f56993168d7aa42e43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8692
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move the definition of structure spdk_io_channel into
lib/thread/thread_internal.h, so we don't have to update SO_VER for
other libraries in future when we need to change the internal details on
the structure.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I3d2ca7a8737972e0b33ce92e464da42c48f89dec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8189
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The reference count of nvme_bdev_ctrlr will be used to update ANA log
page safely, and nvme_bdev_ctrlr_destruct() can be used to decrement
reference count after completing ANA log page update.
However, nvme_bdev_ctrlr_destruct() is not a good name for this case.
Furthermore, nvme_bdev_ctrlr_destruct() does not set the destruct flag
to true, and the next patch will need nvme_bdev_ctrlr_acquire().
Hence rename nvme_bdev_ctrlr_destruct() by nvme_bdev_ctrlr_release().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I285b7ab0963d0f4ea4a7a9fd29bd026d37ba8460
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8334
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Consolidate populate_namespaces_cb() calls for error cases into
connect_attach_cb(). Then remove ctx parameter from
bdev_nvme_add_secondary_trid() because it is not necessary now.
The next patch will inline _nvme_bdev_ctrlr_create() into
nvme_bdev_ctrlr_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia94f456df160c1cc874acac4c70aad27102cb0b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8314
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The common bdev layer will split large WRITE ZEROES ranges into
multiple children requests based on the backend device's setting,
it will try to split up to 8 children requests at a time to avoid
flood requests.
Also add UT to cover different cases.
Change-Id: Id9505fbe1c297412ef97b1f73587b22bc43f770e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7875
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
POSIX defines PRId64/PRIu64/PRIx64 for printing 64-bit values in a
portable way. Replace a reference to %lu to remove the assumption
about the size of a long.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Id5690eb2ad501eaacb4b266981b4dba128a7b174
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8340
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Set nvme bdev physical block size based value of NPWG and NAWUPF namespace
field.
The logic to set bdev phys_blocklen is based on how Linux nvme block driver
sets it. If the underlying nvme namespace supports NPWG/NAWUPF then bdev
phys_blocklen is set to min(npwg, nawupf)
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I6d254a9e730dccc230b9db4d1217bf7ab2f39b6c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8224
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Linking each unit test with spdk_trace allows for getting rid of lots of
stub definitions for the trace functions. The behavior stays the same,
as the trace calls result in no-op anyway because none of the unit test
apps enable tracing.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I904dac92205aadd644100af2c38989bb7979e47c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Adding iov to the spdk_bdev_zcopy_start function enable spdk_bdev_zcopy_start to
be used by transport layers as the iov is owned by the transport command
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I6d2be7f49566048bf25b7711ada8d2fb49fea6ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6816
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By the next patch, nvme_io_channel will be used as an I/O channel
to a single nvme_bdev. This channel is created to a single
nvme_bdev_ctrlr and has a corresponding I/O qpair. nvme_io_path
will be a better name especially when we support multipath.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic34162f3c383676c5249396a09173329fc6febce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8095
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously only a single thread could submit abort commands for admin
commands and it was the thread of the corresponding controller.
When we support multipath, we need to traverse the list of controllers
to which the target admin command is submitted. Threads of controllers
may be different.
On the other hand, the previous implementation made the I/O flow very
clean, but the I/O flow will not be clean if there are many controllers
and the subsystem does not have its thread.
This patch changes the policy so that any SPDK thread can submit abort
commands for admin commands.
Then when multipath is supported, we will be able to traverse the
list of controllers simply on the current thread to abort either I/O
command or admin command.
We already are able to submit any admin command on any thread anytime
including abort command. Hence this will not cause any issue.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib69de33f2e84b03861c7d95ce060035bdb589e4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8121
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
We can hold bdev_io directly in nvme_bdev_ctrlr as an outstanding reset.
We can put spdk_bdev_io_from_ctx(bio) into a parameter for a few
functions because it is used only once in a function.
Passing not spdk_bdev_io but nvme_bdev_io to bdev_nvme_verify_pi_error()
remove unnecessary substitution.
This is a little more efficient and simplifies the implementation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If49ad9fa42abf27decf3afcd8c994f55faa3bc70
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8094
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Following Linux NVMe host, add UUID and EUI64 comparison to
bdev_nvme_compare_ns().
Besides, previously the return value of memcmp() had been used as
the return value of bdev_nvme_compare_ns() and this was wrong.
Fix it in this patch together.
Add unit test cases for bdev_nvme_compare_ns().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I069ab53e77741d6348b847d51e84a9338e2f3787
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7755
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use the macros for red black tree provided by Free BSD to speed up bdev
name lookup in spdk_bdev_get_by_name().
In the bdev_multi_allocation test, we can get 3x ~ 5x speed up when
creating multiple bdevs for various bdev nums.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I49a2fbcccf06d4c36cbd445ce59e0b0dd4ada31d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7837
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
We cannot rely on DSM/DEALLOCATE as a write zeroes
alternative, even if DLFEAT reports that deallocated
blocks will be read as all zeroes. DEALLOCATE is
advisory, meaning that blocks may not actually be
deallocated. In cases where they are not deallocated,
they will not be read back later as zeroes.
QEMU 6.0 started reporting DLFEAT as returning zeroes
for deallocated blocks but for some of our write
zeroes tests, blocks aren't actually deallocated.
We may be able to add quirks in the future if we know
that a controller reliably deallocates blocks, but
for now we need to revert this completely.
Note that since bdev/nvme module now does not support
write zeroes in any cases, we need to disable the
write zeroes call in the unit tests.
Fixes issue #1932.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I79f0673774b621a9ffcc46891728cc7719e34cdb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7723
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will help us to add unmap split function, also
remove bdev_io_type_can_split() because we changed
to use swith(io_type) ... case now.
Change-Id: I449d6a9f5bf2d0b43dd124bbfc9e1ca2afddc15a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7516
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
There are three modules implementing the bdev-zone API:
bdev_nvme, bdev_ocssd, and vbdev_zone_block.
For all three modules, the number of zones can be calculated using:
block_count / zone_size.
To avoid this calculation being performed everywhere, create a helper
function in bdev_zone.h, together with the other zone APIs, such that
a user can easily get the number of zones.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I2967b15a604ab8bf4420588e7510b9820762f925
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7451
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is necessary to the following patches to test reset continuation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I20e0a6b96694eb06adadfbe8e20f73380645ea43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7326
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
It is more readable to use const variable rather than raw number.
memset is the way to initialize variable size array.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I42f3f34422ea96e06a99bd6cc02e0e91349a4009
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7323
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Previously when attaching a ctrlr, all namespaces had not been
populated. Hence we had to populate each namespace manually.
It is more normal if all namespaces are populated when attaching the
corresponding ctrlr.
This patch does such change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I55d9c444c492ba6e44a609eac81b1ef25a7190a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7313
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previously spdk_nvme_probe_poll_async() had processed all attaching
controllers. Hence it was not easy to attach multiple controllers in
unit tests.
Besides, add a check to exclude duplicated controllers into ut_attach_ctrlr().
If the target is any SPDK library, we should insert another patch
only to do code movement, but this is a unit test file, and so it
will be acceptable to include code movement in the same file.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9e8eba6a67b2a6d0df384214ff84aa5b0c602217
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7312
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
bdev_nvme_delete() calls spdk_nvme_detach() in the end. However,
previously spdk_nvme_detach() stub did nothing and ut_detach_ctrlr()
was called separately if ctrlr wass attached by ut_detach_ctrlr().
This was to differentiate the two cases, ctrlr is statically assigned
or dynamically attached by ut_detach_ctrlr().
This might be a little confusing. Hence by adding a flag, attached,
to ctrlr, merge ut_detach_ctrlr() into spdk_nvme_detach(), and remove
ut_detach_ctrlr() calls.
Besides, change one SPDK_CU_ASSERT_FATAL to return NULL because the
other cases do that and the callers for ut_attach_ctrlr() already have
SPDK_CU_ASSERT_FATAL.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2a73f57c6031819d3ae441a6874127ff5d53fc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7311
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will make the following change simpler and testing
bdev_nvme_find_io_path() will be good.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iac82bdba88e4abfa41c2ce04f10ce41a6b7dbd71
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7106
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Moving nvme_ctrlr_depopulate_namespace_done() to common.c removes the
stub from bdev_ocssd_ut.c and will simplify the upcoming changes.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia94a88ca77518c7df08b52aa9298cdea5997ca1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7135
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvme_bdev_ns_to_bdev() was introduced because nvme_ns->bdev may be
removed to support multipath. However, it is unlikely now.
Hence it is easier to read to stop using nvme_bdev_ns_to_bdev() and
access nvme_ns->bdev directly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iaf35455218761bafd03060a21110ad1c4098b1db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7098
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This change separates failover case more clearly, and will make
the following changes simpler.
Merge spdk_nvme_detach() and populate_namespaces_cb() into
bdev_nvme_add_secondary_trid(). Then change the return type of
bdev_nvme_add_secondary_trid() to void and move the comment to the
head of it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0eb706728cf1b9ad7031eb66e11880a47e2ba767
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7044
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Clean up bdev_nvme_add_trid() by factoring out comparison of namespaces
and comparison of trids into helper functions, bdev_nvme_compare_namespaces()
and bdev_nvme_compare_trids(), respectively.
Then rename bdev_nvme_add_trid() by bdev_nvme_add_secondary_trid().
Rename is for clarification and clean-up is for the next patch.
The next patch will merge spdk_nvme_detach() and populate_namespaces_cb()
into the renamed bdev_nvme_secondary_trid(). Clean-up makes the
next patch simpler.
One note is that checking if the type of trid is not PCIe is done
by holding mutex now to prioritize clean up.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idc8652329dd2c721d101a724ec1a57a66c4174a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7094
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The following changes will require nvme_bdev_ctrlr_create() to be
asynchronous. As a preparation, merge nvme_ctrlr_populate_namespaces()
and populate_namespaces_cb() into nvme_bdev_ctrlr_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I623f927da072d746b4bd83314c0f5bcb9cc34ef0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7043
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The API spdk_nvme_ctrlr_free_io_qpair() returns immediately if the
passed qpair is NULL, but calling spdk_nvme_ctrlr_free_io_qpair()
with NULL should be avoided.
This patch cleans up the code to ensure that nvme_ch->qpair is NULL if
disconnected and spdk_nvme_ctrlr_free_io_qpair() is called only if
nvme_ch->qpair is not NULL.
Then add a test scenario that two reset requests were submitted
simultaneously and the first reset request failed and then the second
reset request also failed. This verifies the refactoring done in the
next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iae461f7f826b0e1a4607a17e528c04a642242d6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7041
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add support for zoned namespaces in the bdev/nvme module.
Query the namespace type, and if a zoned namespace is found, set the
bdev struct members needed by the bdev_zone.h APIs.
Note that while vbdev_zone_block and bdev_ocssd have zone locks,
bdev/nvme does not need any kind of zone lock, because NVMe ZNS
supports append natively.
The whole point of the zone append command is that you don't need any
locks, even when having multiple writers, since the drive will return
back the Assigned LBA where the blocks were actually written.
If a SPDK application will utilize writes instead of zone appends,
the SPDK application itself will need a per zone lock in order to
make sure that there is only one outstanding write.
Adding zone locks in bdev/nvme would reduce the performance of zone
appends, for no reason at all.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ibacdb9b6e839624aba869c9949231343db5914be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6911
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add support in bdev_zone.h for getting the maximum zone append data
transfer size.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I61203e64d51601232c6578a090fa52975364c1f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6910
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch really uses the accelrated engine.
Currently, we only offload the crc32c caculation,
but it can be extended.
Change-Id: If0e4c6a44b6e1e10e03f7eca355bed418d67326b
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6760
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Separate bdev_nvme_reset() and _bdev_nvme_reset() by making
bdev_nvme_reset() call _bdev_nvme_reset_start(), and then
remove the ctx parameter from _bdev_nvme_reset().
This clarifies the next patch and reduces the size of the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I76b0f2f5b83445845a313203e594dca0be150bc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6949
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The recent refactoring removed the destruct poller and change the
reset processing to destruct ctrlr after its completion by conditionally
sending message.
But differentiating callback function is difficult if we reset multiple
ctrlrs.
If nvme_bdev_ctrlr->destruct is set, any new reset cannot start. So we can
use an new variable and always execute the callback function.
Add an new variable pending_destruct to struct nvme_bdev_ctrlr, and set
pending_destruct if ctrlr->ref is zero and ctrlr->destruct is true, and
then start destruct ctrlr if ctrlr->destruct_after_reset is set after
clearing pending resets.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9f34c42a40c5a5da54611e7871aef8c58117a56a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6714
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The following patches will cache and use spdk_nvme_ns pointer rather than
nvme_bdev_ns pointer in I/O paths. As a preparation, change a few cases
to get spdk_nvme_ctrlr pointer from spdk_nvme_ns.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ief5f01f85f46e2ad822af5b5abb13a14f28a0c6a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6834
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When there still exists any NVMe bdev, if the bdev subsystem starts
shutdown, spdk_bdev_unregister() is called first. To avoid regression
for this scenario, add a test case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5f484bda2ee2f3eaca364968a79ec7bf50267980
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6936
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The NVMe Zoned Namespace Command Set Specification has, in addition to a
Max Open Resources limit, a Max Active Resources limit.
An active resource is defined as zone being in zone state implicit open,
explicit open, or closed.
Create a function spdk_bdev_get_max_active_zones() in the generic SPDK
zone layer, so that this limit can be exposed to the user.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I6f61fc45e1dc38689dc54d5649c35fa9b91dbdfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6908
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Purpose: To setup an accelerated function callback
for created spdk_nvme_poll_group. In this patch,
we just create the interface. The real usage of this
call back will be provided in the other patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I0d936aa4eba4dbfcc0137942156b9f2919eb5b78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6758
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There was no unit test for bdev_nvme_get_ctrlr().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia69f0afdba2d3fb31bc38526834edcfc56a69c71
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Previously, not nvme_bdev_ctrlr but spdk_nvme_ctrlr pointer had been
passed to spdk_get_io_channel() in nvme_rpc_io_cmd_bdev_nvme().
There was no unit test for bdev_nvme_get_io_qpair(), and so add
unit test for it to guard us from degradation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I00fdc14ea6467162c5fb90d04389883d7c409a17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6920
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_bdev_io_complete_nvme_status() had set the bdev_io status to
NVME_ERROR even if it is aborted, i.e, sc is ABORTED_BY_REQUEST.
Fix it to ABORTED, and verify the fix by unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b22547105a6d7986747053f93875854336959b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6884
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add test cases for abort request. Both success and failures cases
and both NVMe and admin request cases are added.
The next patch will fix a bug that the status of the bdev_io which
was aborted was set to SPDK_BDEV_IO_STATUS_NVME_ERROR. The status
should have been SPDK_BDEV_IO_STATUS_ABORTED.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4fa885b874507e1a4cf9d70f45e37c4aaef2134a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6883
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Add test case for admin command passthrough to test redirection
of completion processing.
Change the type of opc to uint16_t to cover admin commands.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id01cb924e7778878dcfaf8766b05af1ae52623eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6882
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Community-CI: Mellanox Build Bot
Add mutex per nvme_bdev_ctrlr and replace g_bdev_nvme_mutex by it
for possible cases. These are just drop-in-replacement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib1d5eebd65e514cfe96ad60a9004d9bace7b4f6b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6693
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will make us easier to maintain the operation to delete
nvme_bdev_ctrlr and its trids. The added unit test cases guard us
from degradation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I400d4092020e89bacaebc7be045a456b8760ed8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6688
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The following patches will refactor bdev_nvme_remove_trid() and merge
it into bdev_nvme_delete(). Add test cases for bdev_nvme_remove_trid()
to avoid degradation by the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I42da17c62843ead9a30ab9a06463df4b679e561d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6686
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
spdk_bdev_part_base_construct() is deprecated so this patch
moves remaining instances to spdk_bdev_part_base_construct_ext().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iccd4b15933bec41885adfaf4fc4ce2abedd2d6c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6627
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
On some platforms, GCC identifies that opts.io_queue_requests is used
uninitialised in bdev_nvme_create_qpair due to the stub function
spdk_nvme_ctrlr_get_default_io_qpair_opts which would normally zero the
qpair opts. Whether the warning appears is likely to be determined by
how effectively the platform garbage collects unused code.
Replace the stub with a minimal implementation that zeros the qpair
opts to avoid the warning.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I2b8c2d657ae5401c3b35ca66938a966906cdc846
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6595
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When multipath is supported, nvme_bdev will be got via bdev_subsystem.
To make such change transparent, add a helper function
nvme_bdev_ns_to_bdev() and use it for some cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia5ad0b87178bc739ba0a75789f9f26b860241a04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5801
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
By the recent changes, the linked list nvme_ns->bdevs has only a
single bdev at the maximum. Hence replace it by the pointer
nvme_ns->bdev, and remove the linked list pointer nvme_bdev->tailq.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib976e15bb128ba8479070b58e5f4c43fb9dcf479
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6230
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
By the last changes, not only standard namespace but also ocssd
namespace has only one nvme_bdev, and standard namespace processes
only the head of nvme_ns->bdevs.
This patch changes the common and standard namespace specific
part to process only the head of nvme_ns->bdevs.
The following patch will replace the linked list nvme_ns->bdevs
by the pointer nvme_ns->bdev.
Add a particular error case that nvme_bdev is failed to create even
if ctrlr has one namespace. If ctrlr has one namespace but the
corresponding bdev is failed to create, nvme_ns->populated should
be false and hence nvme_ns->bdevs should not be accessed. However
the code had not assumed such case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5495882fad8c8a012305177179a46d4373ba75f5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5800
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Remove ocssd_bdev_parameter from bdev_ocssd_from_disk_lba(),
bdev_ocssd_to_disk_lba(), and bdev_ocssd_to_chunk_info_offset()
including unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iaf52e3e33609e9f1fe13050e95020bad688dc6ae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6223
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It has been confirmed that there is no affected use case in
the SPDK community when we remove the range parameter from
the bdev_ocssd_create RPC.
Hence, remove the range parameter from the bdev_ocssd_create RPC,
remove range parameter from bdev_ocssd_create_bdev(), remove range
info from ocssd_bdev_config_json(), and then update unit tests
accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1b0a541b61bf26732fd028dc43becb7ca2384f8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6220
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Test bdev_nvme_submit_request() for all supported I/O types
including comare and write.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8c3e7e1b93307329e9cc55692fa3e0e8c291a5b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6190
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add a test case for AER. It includes populating, depopulating, and
resizing namespaces dynamically.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib00c3279142cbdd70a0d571baee5797e661bb963
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6138
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add stub of struct spdk_nvme_qpair and related APIs, and test cases
to reset or failover nvme_bdev_ctrlr. They include a case that destruct
and reset are executed concurrently, and a case that two reset requests
are submitted concurrently. For failover, the test cases are for a single
trid or two trids.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6538a4dc32a73d0d72d6cac2a48c79ea7f00d332
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6132
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add framework for unit tests of bdev_nvme, and add a very simple
test case to create and destruct a nvme_bdev_ctrlr first.
Following patches will add more test cases and dynamic stubs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I98f07d58d469949f3dac5a0bd36a3963de8dc3d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6131
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
For correct behaviour, pthread_mutex must be initialized before use
and destroyed when finished. Add mutex initialization and destroy
calls to io_valid_test.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Idbbf857f3103ba15ab851ed16ce9f4e2bc99f7dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6218
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Need to manage how we store IO context based on DPDK updates
made in 19.11.
Fixes issue #1671
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: If1183808cd30987b6c999912f563949b7ade7fcb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5799
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Factor out the common operation of nvme_ctrlr_depopulate_namespace_done()
and nvme_bdev_attach_bdev_to_ns() into a helper function nvme_bdev_ns_detach().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8efa8bc2c2d455d0fd9e0865ff85fd265d14ee06
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5613
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Separate reference count of nvme_bdev_ctrlr between nvme_bdev_ctrlr
and nvme_bdev_ns.
Set ctrlr->ref to 1 when creating ctrlr, increment ctrlr->ref when
populating ns, decrement ctrlr->ref when destructing ctrlr or
when ns->ref becomes 0, and destruct ctrlr actually when ctrlr->ref is 0.
Set ns->ref to 1 when populating ns, increment ns->ref when
adding bdev to ns, decrement ns->ref when depopulating ns or removing
bdev from ns, and decrement ns->ctrlr->ref when ns->ref becomes 0.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7810384d97a174d8f55d316e5cdf2a9ef4a11432
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5608
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For further simplification, merge decrementing reference count of
nvme_bdev_ctrlr into nvme_bdev_ctrlr_destruct().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I604039c3f38a60b316ae465d4649e9eb11bfb6cc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5573
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
destruct_poller had been used to destruct ctrlr after completing reset, but
we can remove destruct_poller and change reset processing to destruct ctrlr
after its completion by itself.
spdk_io_device_unregister() may fail spdk_for_each_channel(). Hence call
nvme_bdev_ctrlr_do_destruct() as the completion function of spdk_for_each_channel().
The first idea was to always run destruct_poller at nvme_bdev_ctrlr_destruct(),
but this patch will be simpler and more intuitive.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I43a400bdb67ab015d707fb9679693bd3d5bfb070
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5607
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
This patch includes the following work:
1 Add two fields in spdk_bdev_opts structure and make the
two fields configurable.
2 Update the unit test in bdev_ut.c
3 Revise the set_bdev_options rpc call and add the support
to use the two new fields.
Change-Id: Idd6073b3a3ffaba8161e3ffa9444a9e533e67f6d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5664
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The following patches will need to update nvme_bdev_ns at
nvme_ctrlr_depopulate_namespace_done(). nvme_bdev_ctrlr can be
got from nvme_bdev_ns, and so this change will cause no issue.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7cbfe0d936a3a757a8792fdf842e1228b2df05e6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4531
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Patch:
(d3d077cc) bdev: Solve the ABI compatibility issue related with spdk_bdev_opts
didn't include changes from day prior that added new code in bdev_ut:
(9697d84) test: add unit test for split IO
This patch fills in the gap in the UT.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifc6c27d740b45e8135061d0ae86965afaafbe1b2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5640
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This change prepares for the potential change in spdk-bdev_opts
in the future in order to maintain the ABI compatibility
Change-Id: I8ce24299173854c14c697bf7e28cf365c23f005f
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5597
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
At the same time the bdev supports optimal_io_boundary
and max_segment * max_size. Add a unit to test this
scenario.
Change-Id: Ied7c6cb9eefe0ab0c5a3469e9b184cb548a45f1b
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4928
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This unit test is for MAX_SIZE and MAX_SEGS
splitting IO.
Change-Id: I47278a9213986d8aa0e6db041b2795e595558498
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4820
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
When the backend device supports max segments and
max size, we may need to split the IO if the IO segment
size is bigger than max_size or iovcnt is bigger
than max_segments.
Add unit test for span split
Change-Id: If8e9c4f903b7def0ad7ddec7dc5aab8410498db5
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4602
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As same as the last patch, change bdev_ocssd_from_disk_lba() to take
ocssd_ns as an additional parameter.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2612df739137f687cf9aa8699c54885836742b88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5537
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
As same as the last patch, change bdev_ocssd_to_disk_lba() to take
ocssd_ns as an additional parameter.
In unit tests, get ocssd_ns from not ocssd_bdev but nvme_bdev_ctrlr
because direct association between nvme_bdev and nvme_bdev_ns will be
removed when supporting ANA multipath.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8e86b43bfe435fb2732e29e0fb6926d7572b29e2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5536
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
SPDK supports two latest DPDK LTS releases and DPDK 20.11
is out now.
Remove all functionality and checks for versions <= DPDK 19.11.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9c354b7bc56d35a9ab04375f9f5255ca914d53e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5344
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
free_bdev() polls threads to push the bdev unregister forward.
get_device_stat_test called the free_bdev() within a callback,
which results in polling threads recursively.
Discovered while working on asynchronous registration for bdevs.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib4f6f50c1542d11e98f8ba093710620cca016eb4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5211
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This change increases the coverage and makes the unit test more
realistic, and furthermore makes the following refactoring easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If8177b9cff888bf26e9a8e9830d4e915d264523f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5247
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
POSIX defines PRId64/PRIu64/PRIx64 for printing 64-bit values in a
portable way. Replace a few references to %ld to remove the assumption
about the size of a long. Similarly, use %z with size_t arguments.
Where the value being printed is an unsigned 64-bit value, use PRIu64
instead of %ld.
Add a cast when comparing an enum to an integer value.
Add an explicit uint64_t cast to the definition of BLOCK_CNT to prevent
value truncation.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I093cffe7e79bc04eba012f4ffaf33062a642d062
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5137
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are many duplicated codes about sending response for writing bool result.
That we need a function to do this.
Then we can reduce many codes.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic439111b1e9ca1013f8c657ab925f0c27a7be699
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5033
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously local boolean variable empty was used to destruct a
controller in delete_nvme_bdev_controller(). However, it was hard
to understand and did not work well with refactoring.
Using reference count is more sophisticated and works well, and hence
done in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I59d0552c16653495fa55e9bfe4a2c0a316a204c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4355
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This fixes link issues with clang on some systems.
Fixes another part of issue #1613.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icd51351b8e38043f267918b85e8ed1c3daab2db7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4860
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change the first parameter of vbdev_lvs_create() from bdev pointer
to bdev name, and then remove spdk_bdev_get_by_name() from
rpc_bdev_lvol_create_lvolstore().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9b0e47f551657f6aa1235af37a8357b0af62d414
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4707
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a drop-in replacement. The following patches will remove
spdk_bdev_get_by_name() from the operation to create lvol store.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I31688cf98625f1d13012281d89f06d343e2f2cef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Replace all spdk_bdev_open() calls by spdk_bdev_open_ext() calls
in the multiple SPDK threads cases of the unit tests for lib/bdev.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I65591f12f8737bb8a0c1256fa84c5b6dac481150
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4728
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Replace most spdk_bdev_open() calls by spdk_bdev_open_ext() calls
in the unit test for lib/bdev.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifbb8a7338b1d99808c96c87be1cfbee145b0d21f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4727
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes legacy config support in bdev layer.
All options through the legacy config are already reflected in JSON.
Removed configuration can be set via `bdev_set_options` and
`bdev_set_qos_limit` RPC.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I24c365625540659cad425268d2aa41e3bf279d5d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4645
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is just a drop-in replacement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I018ef60648122aa672430bb62dc7b1a2e1cd5d7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4648
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a drop-in replacement. Update unit test together, and the
idea of the update was from the unit test for zone bdev module.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia8d0644f42b9d0a0ad502eebbe3e414abd1de4cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4591
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
vbdev_crypto_claim() gets bdev name instead of bdev pointer
as a parameter, and open the corresponding base bdev first using
spdk_bdev_open_ext().
The purpose is to fix the race condition due to the time gap
between spdk_bdev_get_by_name() and spdk_bdev_open(). A bdev pointer
is valid only while the bdev is opened.
Resize event is not supported for now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia0e1ce2ce696f431bb26af94729931c3ffb9a9d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4588
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
gcc version 10.1.1 20200619 releases/gcc-10.1.0-223-gf8e16e23d0
(Clear Linux OS for Intel Architecture)
Issue reports:
CC test/unit/lib/nvme/nvme_ns_cmd.c/nvme_ns_cmd_ut.o
bdev_ut.c: In function ‘bdev_io_alignment_with_boundary’:
bdev_ut.c:2146:2: error: ‘buf’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2146 | free(buf);
| ^~~~~~~~~
bdev_ut.c: In function ‘bdev_io_alignment’:
bdev_ut.c:2008:2: error: ‘buf’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2008 | free(buf);
| ^~~~~~~~~
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I6d1bbf74b230b7bc51646454ddba0db4792f5900
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4693
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes the call of spdk_bdev_get_by_name() from
create_compress_bdev() by calling spdk_bdev_open_ext() and then passing
bdev descriptor to _prepare_for_load_init().
vbdev_init_reduce() returns the return code of spdk_bdev_open_ext()
directly if it is error to process the ENODEV case correctly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie80ce4104ceaa5726db976e33cd35352d5c91703
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4571
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is part of a larger series enabling failover at the bdev
layer for NVMe.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic5c128244699c1a47275145ca7e41aa5f1366259
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3044
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch paves the way for introducing a tailq containing
multiple alternative paths to the same controller.
Change-Id: I13d30c12b8e0ce38eae687f9e76740be1d11e4d1
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3259
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Poller should return status > 0 when it did some work
(CPU was used for some time) marking its call as busy
CPU time.
Active pollers should return BUSY status only if they
did any meangful work besides checking some conditions
(e.g. processing requests, do some complicated operations).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id4636a0997489b129cecfe785592cc97b50992ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is part of a larger series enabling failover at the bdev
layer for NVMe.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0d89e1afab8aeaa90237d0ba780d708154f6e3be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2881
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Cache size of mempool is not based on SPDK thread but DPDK thread,
i.e. CPU core. So replace spdk_thread_get_count() by
spdk_env_get_core_count() to determine cache size of mempool in
spdk_bdev_initialize().
Besides, allocate and free stub cores at the corresponding unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icc4deae84c74820af4de61e991fa3f8683add058
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2767
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Using not FAILED but ABORTED for the completion status of the I/Os
aborted by reset will be reasonable and is done in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8c8181dd33453a330888cffa93505e6fc462f278
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The last patch ensures that the parent I/O terminate with failure
before continuing splitting process if one of child I/O failed.
This simplifies abort operation for I/O splitting.
Then we can use bdev_abort() and bdev_abort_io() nestedly.
Add necessary unit test together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I562bb6675f1fa380bc53dbe369138317ead66fe0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Previously, bdev_io_split_done() had continued splitting process
even if the status became failed. To abort split I/O, this patch
changes bdev_io_split_done() to terminate with failure before
continuing splitting process if the status became failed. Add
necessary unit test together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifd1ea49c22523e8c06fb45ebdcb2c84a57afd2ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2234
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to abort split I/Os. To abort any I/O by
bio_cb_arg, they have to be managed by the submitted I/O list.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9459d9d2d3511aad0325dcc20d88610444a4ea04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When the target I/O is controlled by QoS, the abort request is
submitted on the same channel that the target I/O is submitted.
By using this, add a helper function bdev_abort_queued_io(), and
change _bdev_io_submit() to call bdev_abort_queued_io(), and
call _bdev_io_complete_in_submit() with success if bdev_abort_queued_io()
returned true when QoS is enabled on the corresponding channel.
Add necessary unit test together.
Update unit test accordingly, especially, update stub_submit_request()
to abort the matched I/O, update io_during_io_done() because we need to
know not boolean but the exact completion status now, and update
basic_qos() to reset the rate limit to test the abort I/O feature.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I16ca21e7c32cabfdce5d0e5c27a8af8bb00f11c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2230
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add spdk_bdev_abort function as a new public API.
This goes all the way down to the bdev driver module and attempts to
abort all I/Os which has bio_cb_arg as its callback argument.
We can separate when only a single I/O has bio_cb_arg and when multiple
I/Os have bio_cb_arg, but unify both by using parent - children I/O
relationship. To avoid confusion, return matched_ios by _bdev_abort() and
store it into split_outstanding by the caller.
Exclude any I/O submitted after this abort command because the same cb_arg
may be used by all I/Os and abort may never complete.
bdev_io needs to have both bio_cb_arg and bio_to_abort because bio_cb_arg
is used to continue abort processing when it is stopped due to the capacity
of bdev_io pool, and bio_to_abort is used to pass it to the underlying
bdev module at submission. Parent I/O is not submitted directly, and is
only used in the generic bdev layer, and parent I/O's bdev_io uses bio_cb_arg.
Hence add bio_cb_arg to bdev structure and add bio_to_abort to abort structure.
In the meantime of abort operation, target I/Os may be completed. Hence
check if the target I/O still exists at completion, and set the completion
status to false only if it still exists.
Upon completion of this, i.e., this returned zero, the status
SPDK_BDEV_IO_STATUS_SUCCESS indicates all I/Os were successfully aborted,
or the status SPDK_BDEV_IO_STATUS_FAILED indicates any I/O was failed to
abort by any reason.
spdk_bdev_abort() does not support aborting abort or reset request
due to the complexity for now.
Following patches will support I/O split case.
Add unit tests together to cover the basic paths.
Besides, ABI compatibility check required us to bump up SO version of
a few libraries or modules. Bump up SO version of blob bdev module simply
because it does not have any out-of-tree consumer, and suppress bumping
up SO version of lvol library because the affected struct spdk_lvol
is not part of public APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I515da688503557615d491bf0bfb36322ce37df08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Last and only usage of struct lvol_task was removed in
previous patch.
Since it is no longer used, remove the structure itself.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3612106de2ab3a9197245de078c73c53beeff443
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no point in setting this value on submission
and changing it on callback.
Since it is based on blob bserrno.
lvol_task is removed in next patch.
This change was motivated by lvol_op_comp() accessing
the task->status pointer on hot path for I/O.
There is no need to do so, so just pass status.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I17461fcf355f771f4de4e6d5ec1900d5042bd3d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1804
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The UT stubs weren't calling the assigned callbacks
and some weren't assering the passed values.
This will come in handy in next patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I86eec58a28e40a93ff06b7e7c715c17d25e28818
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1970
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Lack of this initialization cause compilation error on release builds.
bdev_raid_ut.c: In function ‘test_multi_raid_with_io’:
bdev_raid_ut.c:2007:3: error: ‘ch_ctx’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2007 | verify_io(bdev_io, g_max_base_drives, ch_ctx, pbdev,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2008 | g_child_io_status_flag);
| ~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2221aa1d78d640439d5876a781a0d173a370e2a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following patches will require thread termination so that thread_exit()
will move thread to exiting, thread_poll() will move thread from
exiting to exited, thread_is_exited() will detect the threadis exited,
and then call thread_destroy().
So change all places as a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b2e8aee5ed7cd160a88b4c9aaed7d90bd9dac07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1640
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use SPDK thread library in unit tests for compress bdev. This will
enable us to write unit tests for refactoring.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iac3867cca460b998c9b3953aae5241ffddc3168b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1451
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
