Starting in SPDK 23.01, calling spdk_bdev_register() and
spdk_bdev_examine() from a thread other than the app thread was
deprecated. This commit removes the deprecation and as such calling
these functions from a thread other than the app thread is an error.
As a side effect of this commit, all bdev module examine_config() and
examine_disk() callbacks will be called on the app thread.
Change-Id: Idaae06608101e2a513d9312ac5544ffe94effe4a
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15826
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The next patch will improve media mgmt notifications but it will be
almost same as _resize_notify() and _remove_notify().
On the other hand, there are a few differences between _resize_notify()
and _remove_notify(). _remove_notify() will be better.
To avoid duplication, unify _resize_notify() and _remove_notify() by
adding abstraction event_notify() and _event_notify().
Add unit tests for the complex race conditions.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ibe2478479c61459c0da0db8d28c7273f05275e0f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16577
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
We should always called the unregister callback on
the same thread that spdk_bdev_unregister() was
originally called. So save the thread pointer and
use an spdk_thread_send_msg() to make sure it gets
called on the correct thread when the unregister
finishes.
Also add unit test that reproduces the original
issue.
Fixes issue #2883.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib3d89368aa358bc7a8db46a8a8cb6339340469d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16554
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This introduces a deprecation for calling spdk_bdev_register() and
spdk_bdev_examine() on a thread other than the app thread. The
deprecation period starts in SPDK 23.01 and removal is expected in SPDK
23.05.
The intent of this deprecation is to ensure that bdev modules'
examine_config() and examine_disk() callbacks are only ever called on
the app thread. This largely a formalization of what has long happened
due to the RPC poller running on the first thread started by
spdk_app_start().
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ic9d7b87b6522be20357d2eab2d0c77cd5753452f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
The internal mempools were replaced with the newly added iobuf
interface.
To make sure we respect spdk_bdev_opts's (small|large)_buf_pool_size, we
call spdk_iobuf_set_opts() from spdk_bdev_set_opts(). These two options
are now deprecated and users should switch to spdk_iobuf_set_opts().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib1424dc5446796230d103104e272100fac649b42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
`BDEV_IO_NUM_CHILD_IOV` and `BDEV_RESET_IO_DRAIN_RECOMMENDED_VALUE`
are public macro definitions without `SPDK_` prefix, so we add the
`SPDK_` prefix to them.
Change-Id: I4be86459f0b6ba3a4636a2c8130b2f12757ea2da
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15425
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the 4 digit year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.
Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
A new parameter io_drain_timeout has been added to spdk_bdev
structure. If this value is unset, the bdev reset behavior
does not change.
The io_drain_timeout controls how long a bdev reset must wait for IO
to complete prior to issuing a reset to the underlying device.
If there is no outstanding IO at the end of that period, the reset
is skipped.
Change-Id: I585af427064ce234a4f60afc3d69bc9fc3252432
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14501
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
To fix issue: #2484
When unregistering the bdev, will send out the message
to each thread to abort all the IOs including IOs from
nomem_io queue, need_buf_small queue and need_buf_large queue.
The new SPDK_BDEV_STATUS_UNREGISTERING state is newly
added to indicate this unregister operation.
In this case, the bdev unregister operation becomes the
async operation as each thread will be sent the message
to abort the IOs and as the last step, it will unregister
the required bdev and associted io device.
On the other hand, the queued_resets will be handled
separately and not aborted in the bdev unregister.
New unit test cases are also added:
enomem_multi_bdev_unregister: to abort the IO from
nomem_io queue during the unregister operation
bdev_open_ext_unregister: to handle the events and
async operations from the unregister operation
Change-Id: Ib1663c0f71ffe87144869cb3a684e18eb956046b
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12573
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
There is a race condition when a bdev is unregistered while reset is
submitted from the upper layer very frequently.
spdk_io_device_unregister() may fail because it is called while
spdk_for_each_channel() is processed.
spdk_io_device_unregister io_device bdev_Nvme0n1 (0x7f4be8053aa1)
has 1 for_each calls outstanding
To avoid this failure, defer calling spdk_io_device_unregister() until
reset completes if reset is in progress when unregistration is ready
to do, and then reset completion calls spdk_io_device_unregister()
later.
A bdev cannot be opened if it is already deleting. So we do not need
to hold mutex.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ida1681ba9f3096670ff62274b35bb3e4fd69398a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12222
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
memory domains
If bdev doesn't support any memory domain then allocate
internal bounce buffer, pull data for write operation before
IO submission, push data to memory domain once IO completes
for read operation.
Update test tool, add simple pull/push functions
implementation.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie9b94463e6a818bcd606fbb898fb0d6e0b5d5027
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10069
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Linking each unit test with spdk_trace allows for getting rid of lots of
stub definitions for the trace functions. The behavior stays the same,
as the trace calls result in no-op anyway because none of the unit test
apps enable tracing.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I904dac92205aadd644100af2c38989bb7979e47c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This fixes link issues with clang on some systems.
Fixes another part of issue #1613.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icd51351b8e38043f267918b85e8ed1c3daab2db7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4860
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Replace all spdk_bdev_open() calls by spdk_bdev_open_ext() calls
in the multiple SPDK threads cases of the unit tests for lib/bdev.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I65591f12f8737bb8a0c1256fa84c5b6dac481150
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4728
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes legacy config support in bdev layer.
All options through the legacy config are already reflected in JSON.
Removed configuration can be set via `bdev_set_options` and
`bdev_set_qos_limit` RPC.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I24c365625540659cad425268d2aa41e3bf279d5d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4645
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Cache size of mempool is not based on SPDK thread but DPDK thread,
i.e. CPU core. So replace spdk_thread_get_count() by
spdk_env_get_core_count() to determine cache size of mempool in
spdk_bdev_initialize().
Besides, allocate and free stub cores at the corresponding unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icc4deae84c74820af4de61e991fa3f8683add058
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2767
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Using not FAILED but ABORTED for the completion status of the I/Os
aborted by reset will be reasonable and is done in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8c8181dd33453a330888cffa93505e6fc462f278
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to abort split I/Os. To abort any I/O by
bio_cb_arg, they have to be managed by the submitted I/O list.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9459d9d2d3511aad0325dcc20d88610444a4ea04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When the target I/O is controlled by QoS, the abort request is
submitted on the same channel that the target I/O is submitted.
By using this, add a helper function bdev_abort_queued_io(), and
change _bdev_io_submit() to call bdev_abort_queued_io(), and
call _bdev_io_complete_in_submit() with success if bdev_abort_queued_io()
returned true when QoS is enabled on the corresponding channel.
Add necessary unit test together.
Update unit test accordingly, especially, update stub_submit_request()
to abort the matched I/O, update io_during_io_done() because we need to
know not boolean but the exact completion status now, and update
basic_qos() to reset the rate limit to test the abort I/O feature.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I16ca21e7c32cabfdce5d0e5c27a8af8bb00f11c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2230
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
CUnit provides a helper macro CU_ADD_TEST() that
simplifies usage of CU_add_test() function.
Test name no longer needs to be provided,
as it will be inherited from function name.
This is a follow up to
https://review.spdk.io/gerrit/c/spdk/spdk/+/931
Change-Id: I8078f02e08b14f12328ae022d7090ba13fbd64e4
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1239
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch changes the way that unittests initialize.
The new way is shorter and simpler.
It assumes that error during initialization is a fatal error,
but in our cases it always is.
This patch is a followp up to
https://review.spdk.io/gerrit/c/spdk/spdk/+/930
lvol_ut.c is the only test that skipped because
it runs same tests multiple times which is not allowed
by new method.
Change-Id: I0baf7ad09a35d5fca2dc4a03b4453c12c14f38a7
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1238
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Keep a mutex protected list of the active locked ranges
in the bdev itself. This is only accessed when a new
channel is created, so that it can be populated with
the currently locked ranges.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id68311b46ad4983b6bc9b0e1a8664d121a7e9f8e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477871
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add an io_locked TAILQ to each channel, which hold
IO that will write to a currently locked region.
Also add a new step to the locking process per channel.
Each channel needs to wait until all existing outstanding
writes to the newly locked range have been completed.
Only the channel that locked an LBA range may submit
write I/O to it. It must use the same cb_arg for the
write I/O as the cb_arg used when locking the LBA range.
This ensures that only the specific I/O operations needing
the lock will bypass the lock.
When a range is unlocked, we will just blindly try to
resubmit all IO in the io_locked tailq. This could be
made more efficient in the future, but we don't expect
this path to occur very often, so going for simplicity
in the first pass.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibdc992144dfaffe7c05471a5b3c020cedd8cdfc3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478226
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Extend the unit test of the timeout IO to multi-thread.
Change-Id: I6cd19b629a5f1e473f69685f495fa067a5f5da25
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This is a part of a change that will introduce
new spdk_bdev_open_ext function. This will make
possible to pass callback function while opening
bdev which will be called when some bdev events
occur.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3e552edd5c90dacd39885e75e9114e48dddf50ea
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Pointer passthrough g_histogram and histogram implicitly ,but the checker
still complains about this, change to spdk_histogram_data_free(histogram)
directly, no need any assert any more.
bdev_ut.c:1486:2: warning: Potential leak of memory pointed to by 'histogram'
poll_threads();
^~~~~~~~~~~~~~
1 warning generated.
Change-Id: I609c1c92643ad03b8e3c62cd8434882e7942efa4
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462789
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Issue reports:
bdev_ut.c:1486:2: warning: Potential leak of memory pointed to by 'histogram'
poll_threads();
^~~~~~~~~~~~~~
1 warning generated.
Add Tear down the channels like other tests in this file.
Change-Id: Iaeff93ec6f17716dfb7638cf4dd5f6cfe2c2de06
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459939
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch changes UT so that bdev modules have async init.
It demonstrates issue with triggering assert in init path,
when bdev modules are reinitialized multiple times.
Change-Id: I9b2b16d8ac53bac6a929f6929ceedb70b250c500
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This was not used by any of the trace register descriptions.
Let's remove it rather keeping it around if we don't need it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idda809e2911db5be555ff6aa13695484a14bf665
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This requires changing arg1_is_ptr to arg1_type.
We will use this to print the first 8 characters of
a blobfs filename when collecting event trace data.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1b321d99145e82b42dcf6d901ce9d6298158edae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452259
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Bdev descriptors could be closed only from the same thread
that opened them. This restriction was suddenly introduced
at one point without making sure all the SPDK code respects
it. Vhost can still close descriptors from any arbitrary
thread and fixing that would require some more effort.
With this patch we remove the thread-specific assert from
spdk_bdev_close() and hence allow vhost to work properly
in debug builds. Vhost can still have a possible data
race with bdev hotremove notification, but let's get rid
of the abort() from the usual code path first.
Change-Id: I6fac66a5ebc907b1c5418fff618f0b64cd9b69f4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We used to wait only for those descriptors which
specified the hotremove notification callback. The
bdev could've been removed before the descriptor
was closed and the subsequent spdk_bdev_close would
simply segfault.
This patch modifies spdk_bdev_unregister to always
wait for all descriptors to be closed before actually
unregistering the bdev. This consolidates the bdev
unregister behavior for descriptors with and without
the hotremove callback.
Change-Id: I9b358209c6abd301b6fe8660e27bc6fa4ef485d6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We didn't call teardown_test() in "unregister_and_close"
test case, causing the subsequent test case to fail
to register the same io_channel. This didn't cause any
issues, as spdk_io_device_register() silently returned
if the same io_device was already registered. However,
there was an extra error message printed and this patch
gets rid of it.
```
Test: unregister_and_close ...passed
Test: basic_qos ...thread.c: 850:spdk_io_device_register: *ERROR*:
io_device 0x55555576e4e0 already registered (old:0x555555770ab0
new:0x55555d7a14d0)
passed
```
Change-Id: Ib554612df8985c9d99b46b71bb76020f52565362
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450111
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are some cases that virtual bdev open and close
the device and QoS will be disabled at the last close.
In this case, when a new bdev open operation comes again,
the QoS needs to be enabled again.
Change-Id: I792e610f4592bad1cac55c6c55261d4946c6b3e2
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442953
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently, the SPDK_BDEV_REGISTER_MODULE() macro uses __LINE__
to generate functions like spdk_bdev_module_register_187().
Typically, this is not a problem as these functions are not called directly
rather, they are only used as constructor functions to load the bdevs during
system startup.
There are languages however, (e.g rust) that require these functions to be
referenced explicitly to prevent them from being removed during the linking phase.
In order to reference them, having the names predictable (and potentially
changed per commit) makes things easier.
Change-Id: I15947ed9136912cfe2368db7e5bba833f1d94b15
Signed-off-by: gila <jeffry.molanus@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/443536
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds the support of read and write separate
bandwidth rate limits control with the configuration file.
Below is the example (in MiB) for the configuration section:
[QoS]
Limit_Read_BPS Malloc0 100
Limit_Write_BPS Nvme0n1 200
Change-Id: I0221516ce70c3fbb07b9e80c1c814ed5ba271c88
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/416672
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added -ffunction-sections / --gc-sections to allow the linker to remove
unused functions when linking test executables. This reduces the number
of required mock definitions to those actually required by tested code.
Change-Id: I22725ce82e22675a7c2d28c8227e586f2cd65023
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/436319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No longer override the send_msg implementation.
This updates ut_multithread.c, which has minor ripple
effects into bdev_ut.c. But that unit test is otherwise
unchanged.
Change-Id: I2fd30a1010bdff0a810d376d985ab1b8a2b22fb9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Each file that need to check SPDK_CONFIG_* options need to include
spdk/config.h explicitly.
Change-Id: If9f2a91ac4c2b1a300dcf88ec3e2a12714ad344a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/427221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch is to introduce the specific QoS related structure
and the enumeration for types of QoS rate limits. Later new
types of QoS rate limits can be supported easily.
Change-Id: Idb8d2e7627fd145bf2b0ddb296c968b6b068f48c
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/424459
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is a race condition with the following sequence:
spdk_bdev_open()
spdk_bdev_unregister() <-- starts deferred message
spdk_bdev_close()
deferred message runs, crashes
Change-Id: I81fbced0849949cfb2dae5a7cc6f60c9685a8885
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424739
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Latest scan-build finds a legitimate issue here - although
it's not clear why it was only found when testing against
a seemingly unrelated patch...
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic981f6f403c638b0b2d454c0be9f7fbe145171d9
Reviewed-on: https://review.gerrithub.io/424887
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_bdev_close() must be called on the same thread as
spdk_bdev_open(). Further, the remove callback on the
descriptor will also be run on the same thread as
spdk_bdev_open().
Change-Id: I949d6dd67de1e63d39f06944d473e4aa7134111b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424738
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This was added a long time back for tracking an rte_mbuf
whose buffer was a different rte_mbuf - all related to
a userspace TCP stack that is no longer in development.
The concept isn't useful now, so remove it to reduce
the complexity of the tracing code.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I310e492eba7f55df242bb29d82fb19f6daee1f51
Reviewed-on: https://review.gerrithub.io/424565
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is a string name used for debugging only.
Change-Id: I9827f0e6c83be7bc13951c7b5f0951ce6c2a1ece
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424127
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
