Running 20sec workload multiple times in the test
takes some time. Reduce the run times to shorten
the execution.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I4ecfa9d48f7ccaabb2a3707093da7662b5e5e807
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16214
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc)
For intel copyrights added, --follow and -C95% were used.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2ef86976095b88a9bf5b1003e59f3943cd6bbe4c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15209
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdevperf application is utilized in multiple test scenarios
and most prominently in SPDK performance reports.
Similar to perf and fio_plugins, it is used to measure performance.
It is intended to represent the expected behavior of users
application that use SPDK bdev layer.
Applications under --enable-tests are intended for specific test
scenarios and user interaction is usually via a test scripts.
Meanwhile --enable-examples are used more broadly to teach and
show usage of SPDK libraries.
As an added benefit with this patch, its possible to compile
bdevperf without need to satisfy additional requirements to
compile all the test applications.
Change-Id: I9aaec1f9d729a1cdee89b5fdc365d61c19b03f82
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14558
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This is causing too many intermittent failures, let's
disable for now while we continue to debug it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8f1f1824b1aa57fe242a77f5d96c9301a2921824
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14001
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By the default value, timeout might be too long to detect connection
failure by the end of the test. 512 milliseconds is too small to use
in production but is not so small for this case.
Fixes#2595
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9f1248b2812eb7625aa943878b022f0a151d4cbb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13908
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It's not needed. $bdevperf_pid is expanded when the trap is signalled,
hence it will always hold PID of the last value it got assigned to.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I89083667e0be5f3f0b0fd1745bfbfb38cb340c42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13922
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The contents of this file is not evaluated in any way, the test only
reads it back to stdout at different stages. Instead, just keep
bdevperf writing to std{out,err}.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ibd0caa101e895661224f8a969395eb018ece19dc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The reconnect timeout test case expects a socket READ error
to trigger the reconnect poller in bdev_nvme module, but
we use the `verify` IO workload to send IO requests which
may cause the client doesn't receive any error, because
it will send WRITE commands first.
Fix issue #2595.
Change-Id: Ibc6b534d157552cdb2b55a03c869e254ec4c462e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13840
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Also display the log when error happens.
Change-Id: I09040a2fee2379e7506701c7cb558f0d26a5de65
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13805
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
