There were two variables controlling libftl's tests. Only one of them
is actually needed (SPDK_TEST_FTL), so this patch removes the redundant
one.
Fixes#956
Change-Id: I125b9cb7d855351488b445da165be9e27f10f914
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new test flag SPDK_RUN_NON_ROOT forcing some of the
SPDK applications to run as an unprivileged user. For now
we implement it in nvmf tests. If enabled, nvmf_tgt will
run as the user who invoked `sudo ./autotest.sh`.
Running SPDK as non-root has two major prerequisites right now:
* there must be an IOMMU in the system in order to use PCI devices
* DPDK version must be either < 18.05 or >= 19.08-rc1
Change-Id: If1ba9dfcc09fc6cac059867408a1b54eddecfb4b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454679
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use var=$(command) to assign output (or quote to assign string).
Change-Id: I4067db46697c32f24e0b4df7d573929ee75757a7
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix SC1087: Use braces when expanding arrays,
e.g. ${array[idx]} (or ${var}[.. to quiet).
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I0ffa91da9847ee0805b664cba573346ab5b83f3a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466898
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is more accurate to what they are, and will make defining library
dependencies much simpler. This change in directory does not affect the
final placement of naming of libraries at the end of time.
Change-Id: Ic48a9233dff564e39ce357a9ea0a111ea2b6414b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function is useful for each test which use nvme device, so
it will be easier to keep it in autotest_common.sh file instead of
including also nvme.sh in each test.
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Change-Id: Ic2e186826211725b95f3ec3b455d23f43ea41b8f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464691
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When this test was ran, it reported for each job:
"fio: verification read phase will never start because write phase uses all of runtime"
There was only randwrite phase, without any read phase with verification.
Alternatievly we can verify a set number of blocks during write using
"verify_backlog" argument.
With this patch writes to all bdevs will be verfied in 1024 chunks.
Change-Id: Ie79d543badd10f3b3ca91b3b56d9d8cb0dd332b2
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Fix SC2007: Use $((..)) instead of deprecated $[..].
SC2007 removed from check_format.sh exclude list.
Change-Id: Ifd858857e461d785d6d6f101acca13c326ee637e
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Changing according to styling check done by ShellCheck.
Removing from check_format.sh exclusion list:
SC2236 - Use -n instead of ! -z
SC2070 - -n doesn't work with unquoted arguments. Quote or use [[ ]]
Change-Id: Ia9d645b9d0ce31b67c4de682395cf36f4ddc8d1f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463180
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch updates net/vpp implementation from version VPP 19.01 to
VPP 19.04.
1. Some binary APIs are deprecated in 19.04 and message queue is used
to handle control events:
- vl_api_bind_sock_reply_t_handler by SESSION_CTRL_EVT_BOUND,
- vl_api_unbind_sock_reply_t_handler by SESSION_CTRL_EVT_UNLISTEN_REPLY,
- vl_api_accept_session_t_handler by SESSION_CTRL_EVT_ACCEPTED,
- vl_api_connect_session_reply_t_handler by SESSION_CTRL_EVT_CONNECTED,
- vl_api_disconnect_session_t_handler by SESSION_CTRL_EVT_DISCONNECTED,
- vl_api_reset_session_t_handler by SESSION_CTRL_EVT_RESET
2. Fixes for Fedora 29/30:
- added "-Wno-address-of-packed-member" (DPDK 19.02 fails to compile
with gcc9.1),
- force "-maes" compile flag for gcc9.1 to compile crypto_ia32 and
crypto_ipsecmb plugins (gcc9.1 doesn't do that for -march=silvermont)
- some minor fixes
3. Default path for VPP instalation is changed for test scripts from
/usr/local/src/vpp to /usr/local/src/vpp-19.04 to avoid VPP version
conflict.
Change-Id: I1d20ad7f138f5086ba7fab41d77d86f8139d038e
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459113
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is needed to create a job in jenkins that tests only the tcp
transport.
Change-Id: Iaa5a07617e9a241a9e4bd50105d5d5d1e849844e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This patch prepares environment to allow compile applications and
libraries with VPP.
Change-Id: Icc067c17b57932062afa5e6a67791bd58de3a2cc
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We have no guaranty that iscsiadm -m session shows all required iscsi
devices at some point of time after login. It may cause that not all
devices are used in further tests (e.g. in fio).
This patch allows to wait for a certain number of sessions after login.
Change-Id: I868cb8f1235dd04d88572bc8518e97de99a2c5e6
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458236
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Instead of doing some OS-specific magic to detect if the
spdk app has already initialized, just try to send it an
RPC. This serves mostly as cleanup, but also simplifies
test output in cases where the spdk app could not be fully
initialized. Previous waitforlisten implementation would
return as soon as the rpc subsystem was initialized, but
the app could have still failed on e.g. bdev initialization
later on. Since waitforlisten() returned success, the
script could continue its execution and try to execute
some RPCs. The logs from the SPDK app and the bash script
could easily mix, rendering the entire output not so clear
to the user.
To fix it, just try to send some RPC commands inside
waitforlisten().
Change-Id: I33eaf362e3cc645f8ea3ee22fd48db1643442129
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457562
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are some leaks in libiscsi that is external to SPDK.
With this patch, any leaks in libiscsi will be suppressed.
Please see examples of the leaks right now when running
bdevperf in initiator.sh test:
Direct leak of 176 byte(s) in 1 object(s) allocated from:
#0 0x7fd64dddfe50 in calloc (/lib64/libasan.so.5+0xeee50)
#1 0x7fd64c60edb4 in scsi_cdb_inquiry (/usr/lib64/iscsi/libiscsi.so.8+0x13db4)
Indirect leak of 256 byte(s) in 1 object(s) allocated from:
#0 0x7fd64dddfe50 in calloc (/lib64/libasan.so.5+0xeee50)
#1 0x7fd64c603a84 (/usr/lib64/iscsi/libiscsi.so.8+0x8a84)
Indirect leak of 52 byte(s) in 1 object(s) allocated from:
#0 0x7fd64dddfe50 in calloc (/lib64/libasan.so.5+0xeee50)
#1 0x7fd64c60d755 in scsi_malloc (/usr/lib64/iscsi/libiscsi.so.8+0x12755)
#2 0x7fd64c6097f8 (/usr/lib64/iscsi/libiscsi.so.8+0xe7f8)
Change-Id: I80ef23b1464841f683344c7aab99f1658a46cd36
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456766
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ASAN needs to be LD_PRELOADed before SPDK fio_plugin
in order to analyze its code.
Just adding that will report any issues in fio binary as
well as the fio_plugin.
To prevent known fio leaks from affecting the results,
a suppression list for LeakSanitizer (used in conjunction with ASAN).
At this time the suppression list contains known leaks
for fio 3.3. The list might need adjustments as fio
version is updated.
Side note. Even though it is possible to specify directory
to ignore ("leak:/usr/src/fio/"). Which in theory should
suppress any leaks in fio. It has side effect of hiding
SPDK leaks as well, since the fio_plugins leaks are
seen as coming from /usr/src/fio/ioengines.c.
See below for examples of each suppressed error:
Direct leak of 42 byte(s) in 4 object(s) allocated from:
#0 0x7f9d52f3e320 in strdup (/lib64/libasan.so.5+0x3b320)
#1 0x41f267 in get_new_job /usr/src/fio/init.c:490
Direct leak of 914936 byte(s) in 10397 object(s) allocated from:
#0 0x7f74422e8ea6 in __interceptor_calloc (/lib64/libasan.so.5+0x10dea6)
#1 0x46402e in log_io_piece /usr/src/fio/iolog.c:214
Direct leak of 608 byte(s) in 19 object(s) allocated from:
#0 0x7f74422e8ca8 in __interceptor_malloc (/lib64/libasan.so.5+0x10dca8)
#1 0x44c4e1 in add_to_dump_list /usr/src/fio/parse.c:1039
#2 0x44c4e1 in parse_option /usr/src/fio/parse.c:1098
Direct leak of 173 byte(s) in 20 object(s) allocated from:
#0 0x7f744227153d in strdup (/lib64/libasan.so.5+0x9653d)
#1 0x44b50d in __handle_option /usr/src/fio/parse.c:718
Indirect leak of 111925528 byte(s) in 1271881 object(s) allocated from:
#0 0x7f74422e8ea6 in __interceptor_calloc (/lib64/libasan.so.5+0x10dea6)
#1 0x46402e in log_io_piece /usr/src/fio/iolog.c:214
Indirect leak of 171 byte(s) in 19 object(s) allocated from:
#0 0x7f744227153d in strdup (/lib64/libasan.so.5+0x9653d)
#1 0x44c4ed in add_to_dump_list /usr/src/fio/parse.c:1040
#2 0x44c4ed in parse_option /usr/src/fio/parse.c:1098
Indirect leak of 167 byte(s) in 19 object(s) allocated from:
#0 0x7f744227153d in strdup (/lib64/libasan.so.5+0x9653d)
#1 0x44c502 in add_to_dump_list /usr/src/fio/parse.c:1042
#2 0x44c502 in parse_option /usr/src/fio/parse.c:1098
Change-Id: I9b5811993508421be50b12af160645c77ea93d7e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456315
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Scripts were using a mix of two approaches, lets unify that so
just dollar-parenthesis syntax is used.
Change-Id: Id093b6c82d1f766ba6af13bed720977eceaa7ffc
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457744
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This doesn't make difference right now, but would be
useful if we printed $BASH_SOURCE or $LINENO in xtrace
(via PS4). Those two will now point to the original
line where xtrace_restore was called rather than
always the single line inside autotest_common.sh.
Change-Id: Idf3ac8d00ad9610960678351014334013149b88d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456964
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Further patches in series will modify the suppression file,
so this patch now creates such file in /var/tmp/.
Meanwhile adding the known false positive to the list.
Any known false positives or leaks in external libs/execs
should be added by adding further entries to the suppression
file.
Change-Id: I7b78d900a86c6eca0b41240fb34dc4f7ad597079
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456622
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds functions in autotest_common.sh,
fio_bdev() and fio_nvme() for their respective plugins.
It simplifies its usage throughout the scripts.
Additionally will help with expanding the fio cmd
line with nessecary changes only in single place.
This will be used in next patch in series to
LD_PRELOAD ASAN before fio_plugin.
Note: Did not implement changes for perf scripts,
since they are usualy run separately and didn't want
to affect those.
Similarly didn't change vhost initiator tests,
because the exported directories do not work for
inside the VM. Will need to think of a way to change it
there as well.
Change-Id: Idf750ee7aa9d5e30efc0ce430d15fa45ceccb203
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456314
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We also no longer hardcode TEST_TRANSPORT=rdma. Users
of the individual test scripts must now explicitly
pass --transport=rdma. Support for tcp will be coming
in future patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I819d69cb0906eb27b692eb2755aca5085298d779
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456685
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This prepares for using scripts for tcp testing as well.
Note that this patch just hardcoded TEST_TRANSPORT to
'rdma' for now. An upcoming patch will require the
caller to pass --transport=rdma instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I085fdf51910aaf960959c71c73a187be41fd7ee8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456667
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Waits up to 2 seconds for a bdev to arrive, if not returns error.
In the next patch in this series this is used and seems like a good
general function.
Change-Id: I3402f34f3dad3d7373973dc785520a5c4e58cd14
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456091
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When a new python script wanted to use RPC client or calls
from RPC lib from ./spdk/scripts/* it had to be created
within that directory.
By expanding PYTHONPATH in autotest_common, now any python
scripts can use that library.
First example of this is located in:
./spdk/test/bdev/bdevio/tests.py
Change-Id: Idf3e5891c3815a84c70525ab9338100acbfa4a43
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455219
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NOTE: pulling the vbdevcompress change into its own patch...
While enabling reduce testing in autotest a few issues were found
in autotest in that some options were being set based on the existence
of a header without checking the test flag, if one existed. Then at
the end of adding options, specific test flags were checked for 0 and
the configure updated to --without. So, to make this easier to read,
the options are organized in sections and where there is a header
dependency as well as a test flag, both are chcekced at the same time.
Change-Id: I8cdc6914906500bbac63528eb541e2b235feb797
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455137
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make the old name a deprecated alias.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibbf50676e0d989b67121e465fc140f94faec46ed
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453033
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Recently, we moved the check for running an installed version of DPDK
above the point where we export the SPDK_* test flags. This resulted in
SPDK_RUN_INSTALLED_DPDK being undefined when trying to check fi we
should run against an installed DPDK. This just caused autotest_common
to print an error message every time it was loaded. I don't think that
it actually caused any errant behavior but this gets rid of the error
message. It's also probably a good idea to keep these definitions as
close to the top of the file as possible.
Change-Id: I5aadbe5c925ecf1ac92926b75c8c043aab73b36b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455456
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Good suggestion from Darek - let's just always
parse common script args from autotest_common.sh.
These arguments follow common arg naming conventions
(i.e. --iso) so there's no harm just doing this for
any test that sources autotest_common.sh. This has
the nice effect of not requiring scripts to
explicitly call this function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id89b68c22557a5a771be407873d0e57843f0d05a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455552
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
iscsi test scripts can now take two arguments -
"iso" and then the sock type (posix or vpp). They
need to be in that specific order too. nvmf test
scripts also support "iso" and we want to add
the transport type (rdma or tcp) as well. Even further
out, we may want to use a sock type for nvmf, i.e.
tcp transport with vpp.
We also have the iscsi_tgt fio_remove_nvme.sh test
that does both iscsi and nvmf.
So to make this all work a bit nicer, add a new
function called parse_common_script_args that
will take the command line arguments to a script
and set the appropriate variables, including defaults
when a specific parameter isn't specified. We will
use getopt-like behavior for this also, instead of
enforcing a specific parameter order. Then a script
could be called like this:
test/nvmf/target/shutdown.sh --iso --transport=tcp --sock=vpp
Individual test scripts then just need to do this
after sourcing autotest_common.sh:
parse_common_script_args $@
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifb8d7666384991482a2d425e26ffa7525b9ac15a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455283
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently autotest prints the following at the start
of each run:
> grep: /[...]/output/timing.txt: No such file or directory
No harm is done and the file is created right after
the grep, but the message might be misleading. We get
rid of it now by ensuring the file always exists before
grepping it.
Change-Id: I271b68479a6fddcbe098c2657fd7c4dc39e6e50a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most of our bash test scripts source autotest_common.sh
to be able to use some autotest-specific functions like
timing_enter(). The same test scripts allow specifying
custom command line parameters without actually realizing
that those parameters can be potentially picked up by
autotest_common.sh as well.
For example, if particular nvmf tests are run in "isolation"
mode by being executed with the first param set to "iso",
and there is a file named "iso" in the current dir, that
file will be sourced. This could be bad.
In this patch we stop sourcing or even processing $1 in
autotest_common.sh. Instead, the test configuration will
be sourced just once from autobuild.sh, autopackage.sh
and autotest.sh. If the user wants to run particular test
scripts manually, he should source an SPDK test configuration
by himself - manually as well. In most cases he won't even
have two, as only a few test scripts depend on SPDK_*
variables.
Note that we still have to setup the default values for
SPDK_* variables in autotest_common.sh because some of
our test scripts actually depend on them:
> if [ $SPDK_TEST_RBD -eq 1 ]; then ...
Because it lacks any type of quotes around SPDK_TEST_RBD,
it will print the following message when that variable
is unset:
> /bin/bash: line 0: [: -eq: unary operator expected
It doesn't trigger any error ($? == 0), but can be still
a bit misleading in the script output.
Change-Id: I350045d8582d66fe1ed7697d4bcbba324cb541ad
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most of our test scripts source autotest_common.sh at the
very top of the file, and - since autotest_common.sh
enables xtraces inside - the first thing we'll see in test
output are likely xtraces from sourcing the configuration
file and setting up $config_params. Even a simplest test
script will produce a ton of output this way, making the
entire output unreadable. This is especially annoying when
the test script is run manually, so we get rid of it now.
All the SPDK autotest options and $config_params will be
printed elsewhere anyway.
Change-Id: I6d9c8e8ba261b632ffbb7d6d26d84eb7ccfb2ed8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This way all the ./configure parameters are setup in one
place without any unrelated code in the middle.
Change-Id: I1cd8dc05e326b9ab3e8e51c193dd422fd8b5a00b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We use that variable only inside autotest_common.sh so far,
but hopefully that's going to change now. Our tests still
hardcode /var/tmp/spdk.sock everywhere at the moment.
Change-Id: Iad862cb7674a8108d2a07f35b5298d21e009c5a1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453872
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Put it all together at the top of the file so that
the file is less chaotic overall.
Change-Id: Ia92511e590692bbe31d0f626e9542374eaaab442
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453871
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK_RUN_ASAN was only effective on Linux so far,
even though libasan is available on BSD as well.
Let's fix that.
Change-Id: I58a1796f736616882f797313e22055122b050b57
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453870
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This way we can consistently track when xtrace in our
scripts is enabled or disabled.
> [...]
> xtrace_disable
> PREV_BASH_OPTS=ehxBE
> set +x
> xtrace_enable
> [...]
Change-Id: I2e813dc2a237a4620ea72d26a22a3c8cbeb269f9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor out `set -x` and +x to separate functions. Changing
xtraces is not so trivial and we'll be improving it later
on. We can't factor out the code as is due to local variables,
so we already simplify it a bit in this patch.
Change-Id: Iecbf5cedf821b7b1b71da933ceb158761881a843
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453246
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We added this a long time back when debugging some
multi-process failures. This adds a lot of output
to the log which isn't helpful anymore.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4d46b744f30b32fddedc3dae32f40c077717a1bb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Now that SPDK_TEST_* default to 0, we can decidedly say
that if the requested test suite can't be run on your
system due to unmet dependencies (e.g. missing system pkg),
you will get an error.
Previously we would silently disable that test - e.g. when
someone ran with SPDK_TEST_RBD=1 but had no librbd system pkg
on his system, the SPDK autotest would return success without
running any RBD tests. That was very counter-intuitive.
We still silently disable a lot of tests inside our particular
test scripts. Hopefully we'll stop doing that eventually.
Change-Id: Ib400ba772c095b4d65fa8893a0669f3d8c3984e6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We've got a bunch of `if hash` checks that generate
unnecessary output, e.g.:
$ if ! hash ceph; then [...]
/var/jenkins/workspace/Other_systems/centos7_autotest/
spdk/test/common/autotest_common.sh: line 28: hash: ceph: not found
We now silence that output in cases where we do expect
the binary to be unavailable and handle that case, but
we hold off in cases where `if hash` is just a sanity
check (e.g. `hash sgdisk` in part_dev_by_gpt() which
can make the entire function return immediately and do
nothing).
Change-Id: I7cbfada858aa86d57cbe182ea7f9b222debc8b88
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This ensures the stub gets killed so that we can
make forward progress on collecting a backtrace.
This requires adding an optional parameter to the
kill_stub function to specify a signal.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib46d07b6651c6f35382f38c97901def03f28289d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
By default most of the tests are enabled, if we want to
run only tests that interests us, we need to disable each flag
separatly.
Build SPDK without additional dependencies and exit autotest.sh
early if no test configuration file is provided.
Change-Id: Id4752689479d9325242364c39c89d1236bab0344
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443762
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
FTL doesn't have any kind of special package requirements.
It is getting pretty good traction in the community, so
let's enable it by default.
Note that we will disable FTL on FreeBSD. FTL uses
CIRCLEQ which is not available on FreeBSD. Let's not
spend time trying to get FTL to work on FreeBSD until
there's a demand to do so.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I15525b6c4e6ee52f49adf74d55f9484fe08a6dcc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Recent change of ceph_raw.img size from 10G to 4G breaks
tests on patches which are not rebased or which use
previous SPKD releases.
Change-Id: I9dd79756e3cc7949593cd1c16d4735542d1fb32d
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449469
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently the scripts deletes also files located
in ocf submoudle named core.py. This patch adds regex to avoid that.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I97a21c4860cb54f37f28641dc9cd47adcf2fd939
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Includes the required DPDK dependencies for SPDK block Reduce aka
Compression.
Change-Id: Ic1ea3cbeb9373a7700f6f0c2a3194d65d6a34a41
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/429523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is the functional opposite of waitforblk.
Change-Id: I5e9f77c9ea05b83b8dbfbf49bb3baa2ae8cc1086
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443316
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Introduced a new variable to run functional tests.
It's enabled by default, and can be manually disabled
on systems where e.g. only unit tests are run.
SPDK_RUN_FUNCTIONAL_TEST is a supplement to SPDK_UNITTEST.
The two are completely independent - both can be enabled,
disabled, or run in any combination.
The new variable is prefixed SPDK_RUN_ as it aligns nicely
with SPDK_RUN_CHECK_FORMAT, SPDK_RUN_VALGRIND, and
SPDK_RUN_ASAN, all of which control how much is tested.
SPDK_UNITTEST should eventually follow the same pattern
as well.
This gives us 2 layers of configuration:
SPDK_TEST_* <- what is tested
SPDK_RUN_* <- how it is tested
The following would run UT+ASAN for FTL and BlobFS, without
running their functional tests:
```
SPDK_RUN_FUNCTIONAL_TEST=0
SPDK_RUN_ASAN=1
SPDK_TEST_UNITTEST=1
SPDK_TEST_FTL=1
SPDK_TEST_BLOBFS=1
```
Change-Id: I9e592fa41aa2df8e246eca2bb9161b6da6832130
Signed-off-by: Seth Howell <seth.howell@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442327
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch introduces functional tests for FTL bdev.
The tests cover various I/O workflows and check data integrity. Several
scripts have been added to test the FTL library:
* generate_config.sh - prepares configuration scripts for specified
device
* restore.sh - tests restoring device's state from the SSD
* fio.sh - runs tests based on fio and fio_plugin
The tests are run from autotest.sh when the SPDK_TEST_BDEV_FTL flag is
set.
Change-Id: I561d99ed35fe91eadd3756789cc99afe2da8c1db
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431330
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
We currently use:
`./rpc.py 1>&2 2>/dev/null`
And apparently our stdout redirection gets treated as
a python argument, which is not what we intended. This
caused waitforlisten function to print some unnecessary
messages.
To fix, we could either wrap python with extra brackets
`$(./rpc.py) 1>&2 2>/dev/null` or use &>/dev/null. We
go with the latter.
Fixes#616
Change-Id: I49d2380392435447b7b93259055c1d02c4b9c157
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
In SPDK, we will build isa-l with no shared option
and then integrate it into SPDK. And we do not need
to install isal in the system libaries.
Note: ocf build in autobuild.sh now needs to build
include/spdk/config.h before building the ocf library,
to ensure that header is available in a clean build
environment.
Change-Id: I3f0ce6932b386de17a77cf5bfdfd738b22417e2d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Signed-off-by: paul luse <paul.e.luse@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Chunyang Hui <chunyang.hui@intel.com>
Add SPDK_TEST_CAS suite
Add basic integrity test with multithread-multidevice fio with cache
modes WT and PT
Change-Id: If2916558894d9f7efd9628eb99f7338c90b312b1
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439346
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds core FTL (flash translation layer) submodules.
On regular SSDs the FTL is part of firmware, whereas Open Channel
enables moving it to the host and allows for having full controll
of data placement on the device.
Main functionalities added:
* logical to physical address map
* read / write buffer cache
* wear-leveling
* bad block management
Change-Id: I5c28aa277b212734bd4b1f71ae386b3d6f8c3715
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431322
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add stop.sh before start.sh,to avoid reporting resource busy
it could lead to start failed.
Change-Id: I1756adaad31937a7a4b95fdc488f2334360d4ac2
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/437616
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Having unlimited size core dumps is not a good idea on a lot of
machines. Modify it to 5GB.
Change-Id: I1d52bfa9f2450e2d8f824c3b86aa2ad5fe4579c3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/436412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
In case the process we are waiting for fail to start
listening on RPC socket the test script will stuck till the build times
out. Fix this by adding 20s timeout and 0.5s sleep in the while
loop.
For systems where there is no ip command and netstat output is missing
'Status' column for Unix sockets (like FreeBSD) call the get_rpc_methods
RPC command to check if process is listening.
Change-Id: Ia8b06af7875b65a7fd8be65cf55e92881f6f95db
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/433102
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We are too verbose in many places. Some scripts don't want to be traced
all the way, instad they enable tracing only for some parts and
autotest_common.sh just do 'set -x' in many places.
This patch save 'x' flag on function enter and restore it at exit.
Change-Id: I39b3d3dd3f711e1131e476f9d322d9e1b097ad12
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/432604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This workaround is needed to stop EBUSY errors from NBD ioctls(). This
can be fixed in NBD bdev code but till that point lets merge this
workaround.
Change-Id: Ic1546963538beda4d4409cef93062103e2a23e34
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/434040
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
--with-reduce required to build reduce. This depends on
libpmem being installed.
We still need to work out details in pkgdep.sh and
vm_setup.sh. Some distributions like Ubuntu still
require configuring extra package repositories to
get libpmem packages.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4e056ce1da9a1fecb4458f8f5e7ff5d61c422533
Reviewed-on: https://review.gerrithub.io/430646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Current behaviour will match anything that contain address. Change this
to match whole address only.
Change-Id: I6343fb91ed624cba41adbc33d711fb48c2f167a1
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/431530
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, remove bdev_svc memory limit to prevent it from hanging while
handling discover_bdevs calls.
Change-Id: I2868839f40931b964d49a90a86dfb391e2247e30
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/429535
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Forcing bdev_svc to use a single hugetlbfs file causes the crypto bdev
to fail to properly allocate qpairs for qat devices. The qpairs come
back from the dpdk function queue_dma_zone_reserve misaligned.
Change-Id: Ib0c95856031ca89f6528ea6d39ef68e03e2f9009
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430372
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This script should be called when testing the crypto module. It will
configure any qat cards with class code 37c8 for use with the spdk
crypto bdev module.
Change-Id: I233069fbe9ba3c7a6463f52443234f9fe2c9a1f7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/428549
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The RAID module is no longer marked experimental and
is now built by default. Using '--with-raid' was giving
us an additional deprecation message:
> --with-raid option ignored and is now deprecated.
> RAID module is always enabled.
Change-Id: If9cc65a4900fc93d07fa88a3ebe3498001916285
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429179
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As a side effect, if SPDK_LOG_DISABLED is used in spdk_log() as log
level then no message will be printed.
Change-Id: I2d57b60a5a310a9ef2a1187a81088d0acf828742
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/425105
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
rpmbuild pointed out that this is wrong to have executable files without
shebang. Taking the opportunity and fix this for other files too.
Change-Id: Ib21f436672150edc0aff511bff2eb6839870cf79
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/425382
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new script to enable converting
old INI config files to the new JSON-RPC
config file format.
This prepares for deprecating the INI
config file file format in the future.
Change-Id: I0f2bfa9a585ce3537772b662d8e4028ab08a554d
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/420457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Initial support for softare AESNI_MB DPDK driver only.
Have tested (both aesni and QAT seprately and concurrrently) on underlying NVMe devices
with bdevio and a bdevperf script that runs IOs from 512B to 128K each with Q depths from
1 to 512 in powers of 2 for 30 seconds each run.
QAT can be included in the code (but not makefile) and marked as experimental
until we are ready to test in CI. It works well on 2 systems but is a big PITA to get
the hardware setup and configured for use with DPDK (IMHO).
Change-Id: If518c3df8e74e00efa18afdf194824c5e69778fc
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/403107
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Enable tracepoints and move shm file to
the output directory in case of crash.
Cleanup all shm files after successful run.
Change-Id: Ie46c86ddda71015038624f9b2b5fd4a3e1d7f61f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/425078
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Need to check if process still exists before killing it.
Otherwise if process crashed and no longer exists kill will
return with "no such process" error and prevent other steps
in trap from executing.
Change-Id: I4402d06a4fafa09dc13fba4ef9ebeb2b2fc686bb
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/425353
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was not being tested on every patch previously.
Change-Id: I0a1756f3709da6608f66a2160962ed9b0fb38c7b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424890
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The default directory for dpdk on centOS7, fedora28, and ubuntu 16.04 is
/usr/share/dpdk/x86_64-default-linuxapp-gcc. update autotest_common.sh
to reflect this. Also, add a build pool flag to control whether or not
to ignore that direcory.
Change-Id: I618b902ed04dd4a9f63c5bd2014a9fbb7fcbf91b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424596
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Some test scripts may temporarily disable errexit -
for example, trying a command several times until
it succeeds. In these cases we don't want to
print a backtrace every time that command fails.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I481f50b046eb13e23f7048672281ec7d62a573a2
Reviewed-on: https://review.gerrithub.io/423921
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
1.Refactor the run_test function which used to add detailed information
during run test suites and test cases.
2.Refactor the lvol feature test scripts to make sure their log is the same.
3.Users can use "run_test suite command" to run test suites
and use "run_test case command" to run test cases.
4.Update the vhost and lvol test as example.
Change-Id: I7b6387019a861bd1c4f89b9a7712e53150aea8fa
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/403610
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Readelf psargs field holds file path up to 80 chars.
Above 80 chars path is truncated and --wide option does not
enable displaying longer path.
Added checking if the path was not truncated by testing if
file path from psargs exists. If it does not - check rest of
eu-readelf output for a matching path and use it instead.
Change-Id: Ia89b41115803e2463e2030e739121ce1fa8039e0
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/421100
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
RAID is experimental for 18.07, pending iov support
which is needed for vhost. But we need to at least
build RAID in our tests, and run some basic
bdev tests to ensure it doesn't quickly become stale.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I68bb45df6d00e31dc96ed8bc902b61a5ef699ba2
Reviewed-on: https://review.gerrithub.io/420678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
In part_dev_by_gpt(), stop_nbd_disk is missing and it looks that
this has caused solid/intermittent CI failure in the nbdjson test.
Change-Id: I46b14fa3b7c91547b88f49b28d0cba252b00e8a2
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420123
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As requested in GitHub issue #361, we should have a way to control
whether the SPDK-patched nvme-cli tests are executed.
Also add a report_test_completion call for the NVMe-oF nvme-cli test
so we can easily track whether it executed (the local PCIe nvme-cli
test already had a completion).
Change-Id: I70c26bcf2489ccfa563214a9723603aa705be7ab
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418866
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Meneghini <johnm@netapp.com>
Reviewed-by: <ed.rodriguez@netapp.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
- To override the default /home/sys_sgsw dependency
add DEPENDENCY_DIR to ~/autorun-spdk.conf
E.g.: DEPENDENCY_DIR=/home/vagrant
- To override the default HUGEPAGES use
add HUGEMEM to ~/autorun-spdk.conf
E.g.: HUGEMEM=1024
Change-Id: Ib8db9d7d053ae319fe4c725159742875468d47f0
Signed-off-by: John Meneghini <johnm@netapp.com>
Signed-off-by: Ed Rodriguez <ed.rodriguez@netapp.com>
Reviewed-on: https://review.gerrithub.io/415907
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- load spdk_tgt with bdevs
- check if json config is properly saved and loaded
- check if all bdevs are properly loaded
- check if configuration of spdk_tgt is properly set
Change-Id: I89226bc9c05880e73523fb189116e7433a513244
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/406326
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
ASAN has some memory address regions that it will not
allow applications to use for mappings (including mmap).
So when specifying --base-virtaddr to DPDK for
shared/mutli-process mappings, pick an address that
ASAN will allow the application to map.
Ref: https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm
We will still disable ASLR while using the test stub for now.
Maybe we can eliminate this too in the future, but for now just
modify the autotest_common.sh comment since we've figured out
how to keep ASAN from messing with the mmap hint.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie24fd35bd22aa3ceab6271e8936775b157e5c330
Reviewed-on: https://review.gerrithub.io/416420
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
The FreeBSD contigmem driver has problems allocating
contiguous memory after a large number of unloads/reloads.
Since we run a very limited subset of SPDK tests on
FreeBSD, reduce the HUGEMEM allocation from 8GB to 2GB
to help alleviate the problem and reduce the frequency
of test failures due to contigmem panics.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I777153a6ad4f89311bb4e2f50bf69ee09e628eea
Reviewed-on: https://review.gerrithub.io/416214
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is to support older versions of pmap (specifically procps v 3.2.8
which ships with centOS 6) which don't support the -p and -X options.
Change-Id: Ic8d4b94985c165e8bf224204af48b5d856aa2403
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/411755
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The contigmem driver is built with dpdk and frequently updated. We
should copy this driver each time we build dpdk in order to maintain
support for FreeBSD
kldload checks the sysctl variable kern.module_path when deciding which
modules to load. Since the values stored in this variable are not
determined by our program, I chose to copy the module to both common
directories for kernel modules in FreeBSD.
Change-Id: I2d439a9cbac5bebb79e6ee48bec47409bb215be9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/409250
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This driver was added to allow benchmarking of the SPDK user-mode I/OAT
driver vs. the Linux kernel I/OAT driver; however, this isn't a
particularly interesting test, since the kernel I/OAT driver is totally
inaccessible from user-mode code (it is only exposed to the in-kernel
dmaengine framework).
Maintaining an out-of-tree kernel driver for the sole purpose of
benchmarking is out of scope for the SPDK project, so remove the kperf
driver and test harness.
This can always be retrieved from git history if needed later.
Change-Id: I0ced6e8a88de2cf09a6c0970dfef0ae8f357f193
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408900
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Network namespaces are used to assure that kernel
is not routing packets within host stack,
but they go through veth interfaces.
This patch serves as a base for future VPP test changes,
where namespaces are used as well.
Change-Id: Ic7b82b0a0837bca2e16774fde244348a691fe056
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405641
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Ceph monitor IP address was always 127.0.0.1, with this change
it can be configured at setup time.
Since each test might prefer to specify different addresses
or ones that do not exist at start of autotest.sh. rbd_setup was
moved to begining of each test respectively.
Change-Id: I5626f7ea979d0db921208355ba23314cf48e971f
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/407910
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Multi-process tests should work fine using the DPDK
-base-virtaddr parameter. But we run tests with ASAN
enabled and ASAN instrumentation results in mmap
address hints getting ignored.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I089d31726c7b8f5ed0ccdc2deb19acc5431260f1
Reviewed-on: https://review.gerrithub.io/407843
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will be a debugging aid to root cause some intermittent
test failures seen due to ASLR in the test pool.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23a856ab53bdf378b5da51f1cb8d9f2cdf6efce1
Reviewed-on: https://review.gerrithub.io/407842
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In Fedora 27 the nvme program returns before the kernel has loaded the
namespces associated with the subsystem. This patch ensures that those
namespaces can be enumerated by the kernel before we run any tests on
them.
Change-Id: I77505ed5cd5b1118a841650851fa5ecaf76f5619
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/407829
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
NVML (Non Volatile Memory Library) changed its name to
PMDK (Persistent Memory Development Kit), so make the
necessary changes to the SPDK repository.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id07a87eafb4e9a3099603030c58c0e927bafa608
Reviewed-on: https://review.gerrithub.io/406256
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
netstat is deprecated on CentOS/RHEL in favor of
iproute utilities. At least on one of the systems
in our test pool, netstat isn't installed - we could
install it but let's instead try to use ss if it's
available and still fall back to netstat when it's
not.
While here, remove waitforlisten_tcp instead of
changing it to use ss. We are not using waitforlisten_tcp
anywhere and do not recommend enabling RPC over TCP except
for test purposes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4ee3597536797f501750915a4a219b55004bd454
Reviewed-on: https://review.gerrithub.io/406464
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This enables virtio tests to run with 2MB hugepages
Change-Id: I0f9e2de0cb1f68fb967b929d8a27c6e410cb675a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/404318
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
unlike previous implementations of ceph, luminous (which ships with
fedora 27) does not create a default pool for us. In case we are on a
system using luminous, we need to create that pool ourselves.
Change-Id: I183dc4fff6b92f7b270bd5a5d05947f0d99e9d04
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/405703
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add compiling SPDK with vtune test case.
Change-Id: I7ece8ef87e703eee5b1a8c326fd88224c9a02895
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/392424
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch leverages bdevperf, which configures
an iscsi initiator bdev to test iSCSI target.
Change-Id: I94c9299ef1f286a13678495d270326f4616c6241
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/404068
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This uses libiscsi to implement an iSCSI initiator bdev
module for SPDK. Still a lots of work to do on this - posting
it in case anyone is interested in working on this further.
A number of todo items are listed in a README in the lib/bdev/iscsi
directory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Change-Id: I060e33de0cd6796246789bf0e1bb4f2df59d8f71
Reviewed-on: https://review.gerrithub.io/390313
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Introduce RUN_NIGHTLY_FAILING flag for nightly tests
that are always or periodically failing.
A new cron job will be added to run test with this flag.
RUN_NIGHTLY_FAILING is set for:
test/vhost/readonly/readonly.sh
test/nvmf/multiconnection/multiconnection.sh
a fio job in test/lib/bdev/blockdev.sh
Change-Id: I32640c0d4b916156c2ee996a9847c7c9e64941f8
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/403985
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In some cases, if vhost crashes on startup, test would continue
normally instead of failing
Change-Id: If2f82b5e3dad07403051353d6fcf5e83d5d002c0
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/403064
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function consolidates cleanup behaviors that the pool should follow
in the event of a failure.
Change-Id: I8623f065146292b29a38eb199dcbeac5787723e7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/401857
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The Ceph scripts can now be run from any directory; they don't depend on
their $PWD being the script location anymore.
Change-Id: Iff883a3e9b8ba2d0a6193e2f5c047eb9d7d423fd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401657
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is the first step in reorganizing the spdk test heirarchy.
Change-Id: I83467653af2da2a53251649092bed6902d6cb86e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/401707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
