This is the beginning of support for external snapshots. An external
snapshot is a read-only blobstore device (struct spdk_bs_dev) that can
be used as a blob's back device. Normally a blob will have no back
device (a normal blob), a zeroes back device (a thin provisioned blob),
or a blob back device (a clone blob). When a blob has an external
snapshot ("esnap") as its back device, it is called an esnap clone.
With this patch, esnap clones can be created but they are not yet
useful. Subsequent patches in the series will plumb the IO path, enable
various features, and allow lvol bdevs to be esnap clones.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I29206b628a2b03b6386a88532565e228df988e0e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14969
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
`rpc_bdev_lvol_resize` and `rpc_bdev_lvol_create` can now use size
in MiB instead of `size` in bytes. This change make param `size`
deprecated and using both `size` and `size_in_mib` return error.
Since `bdev_lvol_resize` and `bdev_lvol_create` use size in MiB,
name of param should reflect it, previously used param `size` is
positional therefore there is no need to keep it as deprecated.
This patch fix issue: #2346
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: Ibbe2c056bb63d9f82dee91c87fdd501ce441d5f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16901
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is possible to use ledctl utility to control the state of LEDs in
systems supporting NPEM, even when the NVMe devices are controlled by
SPDK. However, in this case it is necessary to determine the slot device
number because the block device is unavailable. This script takes care
of that, based on nvme bdev name, and invokes ledctl with correct
parameters.
Change-Id: Ib92cd5ca27b8353a62917eed06e1b6ddf119cf49
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16811
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Don't mention specific Fedora version. We'd have
to constantly keep updating this every time Fedora
gets an update.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ibb9093d106554a8d244b75ae83f627a093f729b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16660
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This gets documentation in sync with the latest updates to bdev claims.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Id59cbf6ecd4c4b3ebeb4d053e430b2bc68c87d60
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16741
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The goal of a platform driver is to execute chained accel operations in
the most efficient way possible. A driver is aware of the hardware
available on a platform and can execute several operations as a single
one. For instance, if we want to do DMA and then encrypt the data, the
driver can do both at the same time, if the hardware is capable of doing
that.
Platform drivers aren't required to support all operations. If a given
operation cannot be executed, the driver should notify accel to continue
processing a sequence, via spdk_accel_sequence_continue(), and that
operation will processed by a module assigned to its opcode.
It is required however, that all platform drivers support memory
domains, including the "virtual" accel domain. A method for allocating
those buffers will be added in the following patches.
This patch only adds methods to register and select platorm drivers, but
doesn't change the way a sequnce is executed (i.e. it doesn't use the
driver to execute it).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I97a0b07e264601ab3cf980735319fe8cea54d38e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16375
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This implements the v2 claims API. Compared to the original v1 claims,
v2 claims:
- Support read-write-once, read-write-many, and read-only-many claims.
- Are claimed with spdk_bdev_module_claim_desc().
- Are associated with a bdev descriptor that is passed to
spdk_bdev_module_claim_bdev_desc().
- Are released upon close of the bdev descriptor used to obain the
claim.
- Cannot be taken when a descriptor other than the one passed to
spdk_bdev_module_claim_bdev_desc() has write access.
Later commits in this series are needed to fully integrate them with the
bdev subsystem.
Change-Id: I39a356f5893aa45ac346623ec9ce0ec659b38975
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15288
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This has been actively supported for several years
now, but this part of the documentation was never
updated to reflect that.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad69552ecd37a01ca6d281a0169d527c59c233b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16582
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The gpt bdev module has an off-by-one error. When it
calculates the size of the partition, it simply does
"end - start", when really it should be "end - start + 1".
We cannot just fix it by changing the math here, any
consumers of the partition may have put down metadata
on the partition based on the old size.
So instead add a new SPDK partition type. SPDK will keep
the existing off-by-one behavior when it finds the old
partition type, but will use the correct math when finding
the new partition type.
Fixes issue #2801.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I48eb48c781f1968b59e52b4477ca45e9c81eac11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16298
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
directly
This patch removes hardcoded compressdev code from the
vbdev module and instead uses the accel_fw. The port required
a few changes based on how things are plumbed and accessed,
nothing that isn't be too obscure. CI tests were updated to
run ISAL accel_fw module as well as DPDK compressdev with QAT.
Unit tests for the new module will follow in a separate patch.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I769cbc888658fb846d89f6f0bfeeb1a2a820767e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13610
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
ublk could export a backend device as ublk block device (/dev/ublkb*).
A rpc method is used to add ublk device and it should be done
after creating ublk target. Corresponding, ublk_del_dev is
used to delete the specified ublk device.
Signed-off-by: Yifan Bian <yifan.bian@intel.com>
Co-authored-by: Xiaodong Liu <xiaodong.liu@intel.com>
Change-Id: I3a4ba8d8dc5f5ad241511ccbc9d3336b582a6dc5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15976
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add rpc methond for ublk target creation and destruction. Before to
add ublk device, need to initialize ublk target to create ublk
threads, corresponding an rpc methond to destroy ublk target is
also added. It will deinitialize ublk target and release all ublk
devices.
Signed-off-by: Yifan Bian <yifan.bian@intel.com>
Co-authored-by: Xiaodong Liu <xiaodong.liu@intel.com>
Change-Id: I5db0cf9cc68745440df999169aa1c61111010e02
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
The mlx5 accel module supports crypto operations.
Data buffer is split into `block_size` chunks and each
chunk is enrypted individually.
mlx5 library contains some utility functions that will
later be used by other libraries, this lib will be
exntended later.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Iacdd8caaade477277d5a95cfd53e9910e280a73b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All DPDK related code is removed, handling of
RESET command was sligthly updated.
Handling of -ENOMEM was updated for cases when
accel API returns -ENOMEM
Crypto tests in blockdev.sh were extended with more
crypto_bdevs to verify NOMEM cases - that failed
with original vbdev_crypto implementation
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: If1feba2449bee852c6c4daca4b3406414db6fded
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14860
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add RPC bdev_nvme_get_path_iostat to show I/O statistics for IO paths
of the NVMe bdev.
Change-Id: I22e5ad112d5cfa6d96cf246dcd0e511ae71dc839
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14745
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The directory containing the interface protobuf files recently changed.
Updating the documentation to point to the new directory.
Change-Id: I8c1586e7aee024a12867bc8c32cc7ad57868339b
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16350
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This is the port of the vbdev compress logic into the accel
framework. It includes just one enhancement, to only fill each
mbuf in either src or dst array with max "window size" param to
avoid QAT errors. Note that DPDK ISAL PMD was not ported as we
have native ISAL compression in accel now.
Note: ISAL w/DPDK is still built w/this patch, that can't be
removed until the vbdev module moves to accel fw as it still
depends on DPDK ISAL PMD.
Follow-on patches will include addition C API for PMD selection,
this patch just gets equivalent functionality going. Upcoming
patches will also convert the vbdev compress module to use the
accel framework instead of talking directly to compressdev.
More patches will also address comments on vbdev common code
that addressed here would make the review challenging.
This patch also fixes a bug in the ported code that needs to
be fixed here to pass CI. Capability discovery was incorrect
causing all devices to appear to not support chained mbufs,
with the mbuf splitting code this is important to get right.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7f526404819b145ef26e40877122ba80a02fcf51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15178
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This patch adds virtio_blk_get_transports matching the
virtio_blk_create_transport RPC. Allowing for querying
existing virtio_blk transports and displaying their options.
Signed-off-by: Krystyna Szybalska <krystyna.szybalska@gmail.com>
Change-Id: I0ec49c5f2ad11962feb5087dd376407ad125c349
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16303
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we have stat per bdev I/O channel, but for NVMe bdev
multipath, we don't have stat per I/O path. Especially for
active-active mode, we may want to observe each path's statistics.
This patch support IO stat for nvme_io_path. Record each nvme_io_path
stat using structure spdk_bdev_io_stat.
The following is the comparison of bdevperf test.
Test on Arm server with the following basic configuration.
1 Null bdev: block size: 4K, num_blocks:16k
run bdevperf with io size=4k, qdepth=1/32/128, rw type=randwrite/mixed with 70% read/randread
Each time run 30 seconds, each item run for 16 times and get the average.
The result is as follows.
qdepth type IOPS(default) IOPS(this patch) diff
1 randwrite 7795157.27 7859909.78 0.83%
1 mix(70% r) 7418607.08 7404026.54 -0.20%
1 randread 8053560.83 8046315.44 -0.09%
32 randwrite 15409191.3 15327642.11 -0.53%
32 mix(70% r) 13760145.97 13714666.28 -0.33%
32 randread 16136922.98 16038855.39 -0.61%
128 randwrite 14815647.56 14944902.74 0.87%
128 mix(70% r) 13414858.59 13412317.46 -0.02%
128 randread 15508642.43 15521752.41 0.08%
Change-Id: I4eb5673f49d65d3ff9b930361d2f31ab0ccfa021
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14743
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Support to specify rr_min_io for multipath round-robin policy,
which makes I/O switches to another io path after rr_min_io I/Os are
rounted to current io path.
Change-Id: I09f0d8d24271c0178ff816fa63ce8576b6e8ae47
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Support selecting io path according to number of outstanding io of
each path in a channel. It's optional, and can be set by calling
RPC "bdev_nvme_set_multipath_policy -s queue_depth".
Change-Id: I82cdfbd69b3e105c973844c4f34dc98f0dca2faf
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new module replaces functionality in vbdev_crypto.
This module is bdev agnostic, so some inernal parts
were reworked.
io_channel: contains a qp of every configured DPDK PMD
crypto key: for mlx5_pci we register a key on each available
device since keys are bound to Protection Domain.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: If1845cb87eadacbb921c593ba82207a97f2209a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14859
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Recently the transport_tos option was added but doc/jsonrpc was not
updated.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I27d98767cfe5fa0a8cf66738f1037aa14eccf589
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16170
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Error counters for NVMe error was added in the generic bdev layer but
we want to know more detailed information for some use cases.
Add NVMe error counters per type and per code as module specific
statistics.
For status codes, the first idea was to have different named member
for each status code value. However, it was bad and too hard to test,
review, and maintain.
Instead, we have just two dimensional uint32_t arrays, and increment
one of these uint32_t values based on the status code type and status
code. Then, when dump the JSON, we use spdk_nvme_cpl_get_status_string()
and spdk_nvme_cpl_get_status_type_string().
This idea has one potential downside. This idea consumes 4 (types) *
256 (codes) * 4 (counter) = 4KB per NVMe bdev. We can make this smarter
if memory allocation is a problem. Hence we add an option
nvme_error_stat to enable this feature only if the user requests.
Additionally, the string returned by spdk_nvme_cpl_get_status_string()
or spdk_nvme_cpl_get_status_type_string() has uppercases, spaces, and
hyphens. These should not be included in JSON strings. Hence, convert
these via spdk_strcpy_replace().
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I07b07621e777bdf6556b95054abbbb65e5f9ea3e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15370
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The deprecation (commit 79ed1ba18d) and
removal (commit a6b1e2c57d) of
spdk_bdev_open() did not make the necessary documentation changes
related to obtaining claims. More clarity could be helpful related to
when IO channels may be obtained and how spdk_bdev_module_claim_bdev()
behaves when passed a NULL descriptor. See also commit
9f9c7161c9.
These changes are primarily made to ensure a proper understanding of the
current implementation before making changes to support a newer claims
API.
Change-Id: I01e253e2ec77256f4c2d9ee64ca38070700f7ee7
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15111
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Encourage the use of spdk_spinlock over pthread_mutex_t and
pthread_spinlock_t to improve safety and debugability.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I22e2d3cc917687c9878d7558fe8c640051b51a45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To achieve the highest possible IO-rates and lowest latency, then CPU
cycles must be spent processing IO. This commit introduces three
different techniques dependendent on the 'io_mechanism' used.
For 'libaio', xNVMe is instructued via 'opts.poll_io' to not wait for
completions, thus xnvme_queue_poke() returns immmediatly, the user can
then call xnvme_queue_poke() as frequently as desired. This requires
xNVMe v0.5.0. Earlier versions will ignore 'opts.poll_io' for 'libaio'.
For 'io_uring', xNVMe is instructed via 'opts.poll_io' to enable
IORING_SETUP_IOPOLL.
For 'io_uring_cmd', xNVMe is instructued via 'opts.poll_sq' to enable
IORING_SETUP_SQPOLL, this sets up a kernel-side thread reaping
completions from user-space on the ring. Note that 'io_uring_cmd'
requires liburing >= 2.2.
This commit enables the above by default. The above can be disabled by
setting 'conserve_cpu' to true on the bdev-setup.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: Id54f1e59733ce9ae3b174ad4562904d868d4ef4f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Options:
FORMULA_TRANSPARENT
LATEX_SOURCE_CODE
RTF_SOURCE_CODE
DOCBOOK_PROGRAMLISTING
CLASS_DIAGRAMS
DOT_FONTNAME
DOT_FONTSIZE
DOT_TRANSPARENT
are obsolete in the Doxygen version 1.9.5
Doxyfile has been updated with 'doxygen -u'
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ic2c598f2e463d94b963a32a20f28a16b21389bfe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15822
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixed ftl_l2p reference by adding anchor to the
"Logical to physical address map" subsection
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I7d6ef590a76d55bea4d1392847241f439fc7aebf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This gives us a place to initialize iobuf pools, specify subsystem
dependencies, and execute RPCs to configure the sizes of the pools.
We allow users to configure the size of the pools either through the
options in spdk_bdev_opts or through the new RPC, iobuf_set_options.
The second option has higher priority, so it will override the options
set by the bdev layer.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7c45ace04bc71c8343658f98248fc7babcf24e5d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15765
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: Ief1fd397bc82c83c34b0e7609632172115c716f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8686
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Found with misspell-fixer.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If062df0189d92e4fb2da3f055fb981909780dc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15207
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Both max and min should be reset periodically. We can use the queue
depth sampling poller to reset these but the queue depth sampling poller
is optional. We extend the bdev_reset_iostat RPC to support mode to
reset all or only max/min fields.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9ce54892f6e808f6a82754b6930092f3a16d51ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15444
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Add a helper function bdev_reset_device_stat() to reset I/O statistics.
This funciton is used for the bdev_reset_iostat RPC.
We do not have any plan to use bdev_reset_device_stat() outside
lib/bdev. Hence, we do not add this as a public API.
Then, add a new RPC bdev_reset_iostat to reset I/O statistics of a
single bdev or all bdevs.
Resetting I/O statistics affects all consumers. Add a note to CHANGELOG
and doc/jsonrpc.md.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I97af09107b5c3ad1f9c19bf3cbf027457c4fbae7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15350
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The developer version is required, not the regular one. Without
is configure won't find a header file it wants to actually
enable kernel mode DSA.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ibcab204f90ac6708fd32dacf1c87533d93b2c15f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Add rpc method trace_get_info to show name of shared memory file,
list of the available trace point groups and mask of the available trace points for each group.
Fixes#2747
Signed-off-by: Xinrui Mao <xinrui.mao@intel.com>
Change-Id: I2098283bed454dc46644fd2ca1b9568ab2aea81b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15426
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Currently our docs do not specify apps that can be
viewed by spdk_top tool.
Change-Id: I32ce0e54e114a8a6a4ea135f61d7907062872398
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Method "accel_get_opc_assignments"'s response,
start and end symbol do not correspond.
Change-Id: I040cf00778863b350f21126d460a74e3ee932385
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15484
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
In "Example output"
'./scripts/rpc.py bdev_malloc_create 128 4096 Malloc0'
should be
'./scripts/rpc.py bdev_malloc_create 128 4096 -b Malloc0'
Add the missing '-b'.
Signed-off-by: Roger <lichangxinlivingshade@gmail.com>
Change-Id: I81b7eb122d8a4f115ec23c9e017b235d36b2d7d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15531
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
