DPDK rte_ring_enqueue_bulk() has free_space parameter to return
the amount of space in the ring after enqueue operation has finished.
This parameter can be used to wait when the ring is almost full and
wake up when there is enough space available in the ring.
Hence we add free_space to spdk_ring_enqueue() and spdk_ring_enqueue()
passes it to rte_ring_enqueue_bulk() simply.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9b9d6a5a097cf6dc4b97dfda7442f2c4b0aed4d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The metadata buffer was allocated in multiples of blocks (as well as
aligned to a block). It's not necessary and is a waste of space.
Change-Id: Icb13c664e82b23ea09bec16fa3c18fa98b722d57
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455922
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Padding requests are issued in multiple batches at the same time
when shutdown occurs. This allows for faster removal.
Change-Id: Iea40d2418bedbd7cf3c6865e5eb8f85871db13cd
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454578
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For the latest TLC NAND, one write buffer unit (rwb batch)
needs to be spread over three PUs instead of being allocated
to a single PU for better sequential read performance
since the optimal write size(ws_opt) of 3D TLC NAND is
3 times bigger than the optimal read size(rs_opt).
I added num_interleave_units in 'struct spdk_ftl_conf'
to configure the number of interleaving units per ws_opt.
If num_interleave_units is set as 1, the whole of the ws_opt
blocks are placed sequentially around each PU.
If num_interleave_units is set as N, the 1/N of the ws_opt
blocks are staggered. So consecutively numbered blocks
are separated by ws_opt / num_interleave_units.
The sequential read performance is improved from 1.9GiB/s
up to 2.97GiB/S with this patch on our system. No performance
degradation is observed on sequential writes or
4KB random reads/writes.
Please refer to the Trello card for more details.
https://trello.com/c/Osol93ZU
Change-Id: I371e72067b278ef43c3ac87a3d9ce9010d3fcb15
Signed-off-by: Claire J. In <claire.in@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450976
Reviewed-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Moved freeing the data into one place. Added error checks for all of the
pthread_spin_init calls.
Change-Id: Ic123f75f242fb71b92fcad5acf7b00588c2801c3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Keep write buffer batches marked for resubmission on a separate queue
and treat them with higher priority.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If5bedcfea2e7650b36da231ec3e0cd54e8d2484a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450264
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
SPDK ring size used for write buffer submission queue
must be increased if required number of batches is a
power of two.
Change-Id: I9b9f885064cf6f0f5fe94b0ed4f9d49a4e5c0cd0
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445721
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch implements unit tests for the following modules:
* band
* PPA (Physical Page Address) translations
* write buffer
Change-Id: Ia7292bd3027347e8a3da77dafe71cde2c016bf38
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431328
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds core FTL (flash translation layer) submodules.
On regular SSDs the FTL is part of firmware, whereas Open Channel
enables moving it to the host and allows for having full controll
of data placement on the device.
Main functionalities added:
* logical to physical address map
* read / write buffer cache
* wear-leveling
* bad block management
Change-Id: I5c28aa277b212734bd4b1f71ae386b3d6f8c3715
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431322
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
