Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7310
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are three modules implementing the bdev-zone API:
bdev_nvme, bdev_ocssd, and vbdev_zone_block.
For all three modules, the number of zones can be calculated using:
block_count / zone_size.
To avoid this calculation being performed everywhere, create a helper
function in bdev_zone.h, together with the other zone APIs, such that
a user can easily get the number of zones.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I2967b15a604ab8bf4420588e7510b9820762f925
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7451
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
tcp transport doesn't send a response capsule when
c2h_success is set even if cdw0 or cdw1 are non-0.
Signed-off-by: Ed rodriguez <edwinr@netapp.com>
Signed-off-by: John Meneghini johnm@netapp.com
Change-Id: Ieba81fcc50342a2009f7931526e6f8392e26b6a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6808
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New UT verifies number of extent page writes for
thin provisioned blobs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6b52195d26c3c1414ca862b03e8a3043bbe29b42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7017
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This patch addresses couple issues:
1) Before issuing the md syncs the previous steps in test left
blob state in dirty state already. The resize never had a chance
to apply. This patch adds a proper md sync and polls for completion.
2) Changing blob state is something that should be done via API.
In order for dirty state to apply immidietly set_xattr is now used instead.
3) Verify test state in callbacks to make sure not only the number of
completions is correct, but their order.
This patch is introduced because of the test originally worked
only because of the extent pages always writing out its pages.
The second sync always was delayed because of this.
Meanwhile that should not be the case, since no MD or EP modification
was done.
Later in the series Extent Pages are fixed, but this test remained incorrect.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iac17c27f6ff83f2b79835aa6e48472d5293c44d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This function finds a placement_id that does not have a group
associated with it.
Change-Id: I1306690e980fd4661f46dba9fb283f048a962eba
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7223
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When the format command is issued, the kioxia drives responds with "NS Attr change" notices.
In the callback function of the notice, the CQ Head Doorbell is updated twice with the same
value while issuing the Active NS list & identify NS commands.
Fixes: #1701
Signed-off-by: G.Balaji <gbalajieie@gmail.com>
Change-Id: I8cc80fba0a226c22753e605ef3129602a9313ce7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7149
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also update the UT.
Change-Id: I6086bf4cafca8a917a467490955d7df0ba8930d5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7495
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since the maps are unique to modules, they can store the group_impls
directly.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7f11db558e38e940267fdf6eaacbe515334391c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7222
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This allows for different policies per module, as well as overlapped
placement_id values.
Change-Id: I0a9c83e68d22733d81f005eb054a4c5f236f88d9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Test scenario is as follows.
Some iSCSI initiator sends a Data-OUT PDU sequence such that the size of
the data segment of any Data-OUT PDU is not block size multiples.
Test if such complex Data-OUT PDU sequence is processed correctly.
Desired Data Transfer Length is 5 * SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH / 2.
Number of Data-OUT PDUs is 4. Length of the data segment of the first two PDUs are
SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH / 2 - 4. Length of the data segment of the
third PDU is SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH. Length of the data segment
of the final PDU is SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH / 2 + 8.
Three data buffers should be used and three subtasks should be created and submitted.
The test scenario assume that a iscsi_conn_read_data() call could read
the required length of the data and all read lengths are 4 bytes multiples.
The latter is to verify data is copied to the correct offset by using data patterns.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5e3939d07cd4f50fe3dcf659a18a9f8fcbe01e07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6584
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Test sharing data buffer among multiple Data-OUT PDUs.
Allocate real data buffers and the iscsi_conn_read_data() stub writes
data patterns into them.
The data pattern is to write offset per 4 bytes. This requires read
length to 4 bytes multiples but the requirement will be acceptable.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I87c673c3bb0ada2afebb9332af9525cd9d7388f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6568
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This prepares for an upcoming patch to fix issue #1701 which
requires handling async events outside of the check
completions loop.
Fixes: #1701
Signed-off-by: G.Balaji <gbalajieie@gmail.com>
Change-Id: I4985d814903143511383172b1a443580db33a78f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7416
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We can return error status when processing RELEASE2 without
a reservation, also add a UT to cover this case.
Fix issue #1898.
Change-Id: I56ffa8eabfc0409307500f8740cb627aab9d2f0b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7379
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is necessary to the following patches to test reset continuation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I20e0a6b96694eb06adadfbe8e20f73380645ea43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7326
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
It is more readable to use const variable rather than raw number.
memset is the way to initialize variable size array.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I42f3f34422ea96e06a99bd6cc02e0e91349a4009
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7323
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Previously when attaching a ctrlr, all namespaces had not been
populated. Hence we had to populate each namespace manually.
It is more normal if all namespaces are populated when attaching the
corresponding ctrlr.
This patch does such change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I55d9c444c492ba6e44a609eac81b1ef25a7190a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7313
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previously spdk_nvme_probe_poll_async() had processed all attaching
controllers. Hence it was not easy to attach multiple controllers in
unit tests.
Besides, add a check to exclude duplicated controllers into ut_attach_ctrlr().
If the target is any SPDK library, we should insert another patch
only to do code movement, but this is a unit test file, and so it
will be acceptable to include code movement in the same file.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9e8eba6a67b2a6d0df384214ff84aa5b0c602217
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7312
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We only need SPDK_CU_ASSERT_FATAL to check for
NULL pointers. Other checks should just use
CU_ASSERT and variants.
There are some nvme_ns_cmd_ut checks that are
using SPDK_CU_ASSERT_FATAL unnecessarily. Let's fix
them.
Found during investigation of issue #1882.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0b313e44e2ed05554783933e7d4bbc5f07a7e84a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7290
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Check if qpair has a poll group during the connect process,
use poll group's statistics or allocate own structure per
qpair. That is done due to not all applications use poll
groups and we want to avoid "if (qpair->group)"
conditions in data path.
Admin qpair always allocates its own statistics
structure but the statistics are not reported
since this qpair is not attached to a poll group.
Statistics are reported by spdk_nvme_perf tool
if --transport-stats and in bdev_nvme_transport_statistics
RPC method.
Change-Id: I58765be161491fe394968ea65ea22db1478b219a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6304
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These are interface functions that can be used by
an application e.g. spdk_nvme_perf or bdev_nvme
library. The next patches will add usage of these
functions.
Change-Id: I33b88e0e713c2ea5967f9241885e3257c5070577
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6300
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
bdev_nvme_delete() calls spdk_nvme_detach() in the end. However,
previously spdk_nvme_detach() stub did nothing and ut_detach_ctrlr()
was called separately if ctrlr wass attached by ut_detach_ctrlr().
This was to differentiate the two cases, ctrlr is statically assigned
or dynamically attached by ut_detach_ctrlr().
This might be a little confusing. Hence by adding a flag, attached,
to ctrlr, merge ut_detach_ctrlr() into spdk_nvme_detach(), and remove
ut_detach_ctrlr() calls.
Besides, change one SPDK_CU_ASSERT_FATAL to return NULL because the
other cases do that and the callers for ut_attach_ctrlr() already have
SPDK_CU_ASSERT_FATAL.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2a73f57c6031819d3ae441a6874127ff5d53fc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7311
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will make the following change simpler and testing
bdev_nvme_find_io_path() will be good.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iac82bdba88e4abfa41c2ce04f10ce41a6b7dbd71
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7106
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The following patches will aggregate multiple Data-OUT PDUs into a
single write subtask and we will not be able to use reqh->buffer_offset
to track the current offset of large write I/O to submit write subtasks.
On the other hand, each iscsi_task or iscsi_subtask is only read or write
Hence rename current_datain_offset of iscsi_task by current_data_offset
in this patch.
The next patch will use it to track the current offset of large write I/O
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I922582c5b9474a3c512f81d0f0425158a38a9a8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The following patches will want to aggregate multiple Data-OUT PDUs
into the same data buffer, but it will be 64KB at most.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I72eabbeae0b027c2fbff2a5837d180b06b0a1b49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6418
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following patches will change the handler for Data-OUT PDU to
submit subtask only when 64KB data is read or F bit is set.
Previously, we had created a subtask when processing header and
before reading data segment. Creating a subtask beforehand is not
convenient for the following changes.
Hence create a subtask after reading data segment.
If LUN is removed while processing the Data-OUT PDU, the corresponding
primary task will be terminated by iscsi_clear_all_transfer_task(),
and any subtask completion is not sent to initiator. Hence we can
reject the received Data-OUT PDU safely.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb6d6988676080b458b31d12fef065f3c1de0cb6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The hotplug lib can be used for pcie devices
such as nvme, virtio_blk and virtio scsi.
For the sigbus handler, there is only one in a
process and it should handle all the devices.
And align nvme to the hotplug lib
Add the ADD uevent support for allowing the
device hotplug.
Change-Id: I82cd3b4af38ca24cee8b041a215a85c4a69e60f7
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5653
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Also fix the comment. It's never going to make sense to add a socket
to a group twice.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id4845b77114aef32bbe4ea0e53d2e1fde8e116f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7204
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This will be useful as the same purpose as
spdk_io_channel_iter_get_io_device() and will be used in the
following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id45f5980c65543703b91df2afeb47448232fe503
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7237
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Moving nvme_ctrlr_depopulate_namespace_done() to common.c removes the
stub from bdev_ocssd_ut.c and will simplify the upcoming changes.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia94a88ca77518c7df08b52aa9298cdea5997ca1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7135
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvme_bdev_ns_to_bdev() was introduced because nvme_ns->bdev may be
removed to support multipath. However, it is unlikely now.
Hence it is easier to read to stop using nvme_bdev_ns_to_bdev() and
access nvme_ns->bdev directly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iaf35455218761bafd03060a21110ad1c4098b1db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7098
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This change separates failover case more clearly, and will make
the following changes simpler.
Merge spdk_nvme_detach() and populate_namespaces_cb() into
bdev_nvme_add_secondary_trid(). Then change the return type of
bdev_nvme_add_secondary_trid() to void and move the comment to the
head of it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0eb706728cf1b9ad7031eb66e11880a47e2ba767
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7044
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Clean up bdev_nvme_add_trid() by factoring out comparison of namespaces
and comparison of trids into helper functions, bdev_nvme_compare_namespaces()
and bdev_nvme_compare_trids(), respectively.
Then rename bdev_nvme_add_trid() by bdev_nvme_add_secondary_trid().
Rename is for clarification and clean-up is for the next patch.
The next patch will merge spdk_nvme_detach() and populate_namespaces_cb()
into the renamed bdev_nvme_secondary_trid(). Clean-up makes the
next patch simpler.
One note is that checking if the type of trid is not PCIe is done
by holding mutex now to prioritize clean up.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idc8652329dd2c721d101a724ec1a57a66c4174a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7094
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
With this change, each polling group will use one
accel_engine channel. This change will be more suitable
to utlize the underlying accelerated device.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ibab183a1f65baff7e58529ee05e96b1b04731285
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7055
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The following changes will require nvme_bdev_ctrlr_create() to be
asynchronous. As a preparation, merge nvme_ctrlr_populate_namespaces()
and populate_namespaces_cb() into nvme_bdev_ctrlr_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I623f927da072d746b4bd83314c0f5bcb9cc34ef0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7043
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The API spdk_nvme_ctrlr_free_io_qpair() returns immediately if the
passed qpair is NULL, but calling spdk_nvme_ctrlr_free_io_qpair()
with NULL should be avoided.
This patch cleans up the code to ensure that nvme_ch->qpair is NULL if
disconnected and spdk_nvme_ctrlr_free_io_qpair() is called only if
nvme_ch->qpair is not NULL.
Then add a test scenario that two reset requests were submitted
simultaneously and the first reset request failed and then the second
reset request also failed. This verifies the refactoring done in the
next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iae461f7f826b0e1a4607a17e528c04a642242d6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7041
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add support for zoned namespaces in the bdev/nvme module.
Query the namespace type, and if a zoned namespace is found, set the
bdev struct members needed by the bdev_zone.h APIs.
Note that while vbdev_zone_block and bdev_ocssd have zone locks,
bdev/nvme does not need any kind of zone lock, because NVMe ZNS
supports append natively.
The whole point of the zone append command is that you don't need any
locks, even when having multiple writers, since the drive will return
back the Assigned LBA where the blocks were actually written.
If a SPDK application will utilize writes instead of zone appends,
the SPDK application itself will need a per zone lock in order to
make sure that there is only one outstanding write.
Adding zone locks in bdev/nvme would reduce the performance of zone
appends, for no reason at all.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ibacdb9b6e839624aba869c9949231343db5914be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6911
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add support in bdev_zone.h for getting the maximum zone append data
transfer size.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I61203e64d51601232c6578a090fa52975364c1f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6910
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The specification for Maximum Data Transfer Size (MDTS) says this field
should include the length of metadata, if metadata is interleaved with the
logical block data. However, some drives can support MDTS without counting
the interleaved metadata, so for this case SPDK will only use data length
without interleaved metadata length.
Change-Id: I29920a25885699e2689be043b87122367be0e416
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6813
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch really uses the accelrated engine.
Currently, we only offload the crc32c caculation,
but it can be extended.
Change-Id: If0e4c6a44b6e1e10e03f7eca355bed418d67326b
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6760
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Separate bdev_nvme_reset() and _bdev_nvme_reset() by making
bdev_nvme_reset() call _bdev_nvme_reset_start(), and then
remove the ctx parameter from _bdev_nvme_reset().
This clarifies the next patch and reduces the size of the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I76b0f2f5b83445845a313203e594dca0be150bc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6949
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The recent refactoring removed the destruct poller and change the
reset processing to destruct ctrlr after its completion by conditionally
sending message.
But differentiating callback function is difficult if we reset multiple
ctrlrs.
If nvme_bdev_ctrlr->destruct is set, any new reset cannot start. So we can
use an new variable and always execute the callback function.
Add an new variable pending_destruct to struct nvme_bdev_ctrlr, and set
pending_destruct if ctrlr->ref is zero and ctrlr->destruct is true, and
then start destruct ctrlr if ctrlr->destruct_after_reset is set after
clearing pending resets.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9f34c42a40c5a5da54611e7871aef8c58117a56a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6714
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The following patches will cache and use spdk_nvme_ns pointer rather than
nvme_bdev_ns pointer in I/O paths. As a preparation, change a few cases
to get spdk_nvme_ctrlr pointer from spdk_nvme_ns.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ief5f01f85f46e2ad822af5b5abb13a14f28a0c6a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6834
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When there still exists any NVMe bdev, if the bdev subsystem starts
shutdown, spdk_bdev_unregister() is called first. To avoid regression
for this scenario, add a test case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5f484bda2ee2f3eaca364968a79ec7bf50267980
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6936
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Although this is not a mistake, it's better to add a semicolon to
be consistent with other DEFINE_STUB.
Change-Id: I5953b4612659d4115cb7735b1617eb8c13400798
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The NVMe Zoned Namespace Command Set Specification has, in addition to a
Max Open Resources limit, a Max Active Resources limit.
An active resource is defined as zone being in zone state implicit open,
explicit open, or closed.
Create a function spdk_bdev_get_max_active_zones() in the generic SPDK
zone layer, so that this limit can be exposed to the user.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I6f61fc45e1dc38689dc54d5649c35fa9b91dbdfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6908
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Purpose: To setup an accelerated function callback
for created spdk_nvme_poll_group. In this patch,
we just create the interface. The real usage of this
call back will be provided in the other patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I0d936aa4eba4dbfcc0137942156b9f2919eb5b78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6758
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There was no unit test for bdev_nvme_get_ctrlr().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia69f0afdba2d3fb31bc38526834edcfc56a69c71
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Previously, not nvme_bdev_ctrlr but spdk_nvme_ctrlr pointer had been
passed to spdk_get_io_channel() in nvme_rpc_io_cmd_bdev_nvme().
There was no unit test for bdev_nvme_get_io_qpair(), and so add
unit test for it to guard us from degradation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I00fdc14ea6467162c5fb90d04389883d7c409a17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6920
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_bdev_io_complete_nvme_status() had set the bdev_io status to
NVME_ERROR even if it is aborted, i.e, sc is ABORTED_BY_REQUEST.
Fix it to ABORTED, and verify the fix by unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b22547105a6d7986747053f93875854336959b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6884
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add test cases for abort request. Both success and failures cases
and both NVMe and admin request cases are added.
The next patch will fix a bug that the status of the bdev_io which
was aborted was set to SPDK_BDEV_IO_STATUS_NVME_ERROR. The status
should have been SPDK_BDEV_IO_STATUS_ABORTED.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4fa885b874507e1a4cf9d70f45e37c4aaef2134a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6883
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Add test case for admin command passthrough to test redirection
of completion processing.
Change the type of opc to uint16_t to cover admin commands.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id01cb924e7778878dcfaf8766b05af1ae52623eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6882
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Community-CI: Mellanox Build Bot
Make stub for external APIs, cases for getting lkey
and constructing ctrlr.
Change-Id: I1b453139e98b297616d839de66690947c6f19738
Signed-off-by: Mao Jiang <maox.jiang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6529
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is an internal API used in several places. The call can fail, so
make sure it can report that correctly.
Change-Id: Iac0ed2c8299c9dd3d2556070278a2224c3807b7b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6640
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
include test_nvme_ns_set_identify_data,
test_spdk_nvme_ns_get_values(Most functions that simply get values),
test_spdk_nvme_ns_is_active,
and spdk_nvme_ns_supports(Judge whether extended_lba and compare are supported).
The above func is completed.
Signed-off-by: ChengqiangMeng <chengqiangx.meng@intel.com>
Change-Id: I916173a195692045ee0ee3fa408a1696e0eb5b1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Add mutex per nvme_bdev_ctrlr and replace g_bdev_nvme_mutex by it
for possible cases. These are just drop-in-replacement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib1d5eebd65e514cfe96ad60a9004d9bace7b4f6b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6693
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will make us easier to maintain the operation to delete
nvme_bdev_ctrlr and its trids. The added unit test cases guard us
from degradation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I400d4092020e89bacaebc7be045a456b8760ed8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6688
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The following patches will refactor bdev_nvme_remove_trid() and merge
it into bdev_nvme_delete(). Add test cases for bdev_nvme_remove_trid()
to avoid degradation by the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I42da17c62843ead9a30ab9a06463df4b679e561d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6686
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
spdk_bdev_part_base_construct() is deprecated so this patch
moves remaining instances to spdk_bdev_part_base_construct_ext().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iccd4b15933bec41885adfaf4fc4ce2abedd2d6c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6627
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Leverage SO_INCOMING_CPU to get the CPU affinity of connections
(sockets). And allocate the connections to specific poll groups,
which aims to utilize cache locality.
From our test:
6 P4600 NVMe on target,target uses 8 cores, NIC irqs are bound to
these 8 cores, and initiator side uses 24 and 32 cores,
we can get 11%~17% randwrite performance boost for posix, and 8%~12%
for uring.
Change-Id: I011e0a21502c85adcccd4a14fbe9838b43f54976
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5748
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Cases for IO message sending and processing.
Change-Id: Id9085c016d4379401f8e203006e11a268518d0e2
Signed-off-by: Mao Jiang <maox.jiang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6215
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
On some platforms, GCC identifies that opts.io_queue_requests is used
uninitialised in bdev_nvme_create_qpair due to the stub function
spdk_nvme_ctrlr_get_default_io_qpair_opts which would normally zero the
qpair opts. Whether the warning appears is likely to be determined by
how effectively the platform garbage collects unused code.
Replace the stub with a minimal implementation that zeros the qpair
opts to avoid the warning.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I2b8c2d657ae5401c3b35ca66938a966906cdc846
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6595
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvme_tcp_parse_addr code comprehensive coverage.
res->ai_addrlen is returned by getaddrinfo(), and it is an IPV4 or IPV6 address, so its maximum length is not more than 46.
And sizeof(*sa) is always 128,so ai_addrlen cannot be greater than sizeof(*sa).
Signed-off-by: ChengqiangMeng <chengqiangx.meng@intel.com>
Change-Id: Id432a39c1461c484ea871e7e9d8d3ed7a8391200
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6512
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
