There are several functions in the internal header that
are only used in the library that have kept the spdk prefix.
Add those to the suppression file since nobody in practice will
be using them.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Iae1666c6f0bb853e62b89858037a5cded38c9b66
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2213
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
While we are here, change SPDK_LOG_JSON_UTIL to SPDK_LOG_JSON
It fits better with the naming convention.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I12bc8a44acf3effc5effcbc40ef1ab9af6e52c6c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
While we are here, give the library an so suffix
which was missed when the library was initially
created.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I68929127bf672c0f2f7153f9716882d03151480e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2209
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Use 20.04 reference build instead of 20.01.
Also updatethe NVMe-oF Makefile to reflect a change to the
ABI since 20.04 was released. This has to be done in the same
patch to keep the build from failing.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3201f698ecb441021964debda760866dbbc01a64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
One of these warnings, such as:
/home/wanghailiang/spdk20200428/lib/nvme/nvme_rdma.c: In function ‘nvme_rdma_qpair_submit_request’:
/home/wanghailiang/spdk20200428/lib/nvme/nvme_rdma.c:1512:29: warning: ‘lkey’ may be used uninitialized in this function [-Wmaybe-uninitialized]
rdma_req->send_sgl[1].lkey = lkey;
^
/home/wanghailiang/spdk20200428/lib/nvme/nvme_rdma.c:1480:11: note: ‘lkey’ was declared here
uint32_t lkey;
^
Change-Id: I67b25cb62c7a0d5b298ebfe7d2673b73261040ef
Signed-off-by: WANGHAILIANG <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2197
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK_ERRLOG() uses spdk_log() procedure which is
customizable and redirectable, so it is preffered over fprintf.
It also prints source location which is useful.
Change-Id: I27574be4a774169f356ebd8dcdfd2a33a057f051
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1943
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In spdk_log() accept filename = NULL.
If filename is NULL then source information as well
as log level is not displayed.
This change allows to replace all usages of
printf() and fprintf(stderr,) by
SPDK_PRINTF() and SPDK_ERRLOG() which use spdk_log().
Using spdk_log() instead of printf() is always prefered
since SPDK can be used inside of another application
where SPDK logs could be redirected.
SPDK uses printf()
places where location info is not needed
we cannot replace it by SPDK_NOTICELOG().
This change is in the scope earlier planned task:
https://trello.com/c/lZzBjrw3/10-remove-use-of-printf-fprintf-and-perror-for-logging-in-library-code
Change-Id: I55c24da4a2092bd118fa2c121092d253cedb1cf8
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1942
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prior to adding more operations, make this a bit more efficient.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I02b864f998800c25076233183840bba8bff92196
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2069
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add both the plumbing in the engine to call module entry
points if they exist as well as the json write config
for idxd (the only module with config info at this time).
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I91376d3fc60227cd79fae17b164722619eafb9e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2052
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was added before the usage of having a SW engine and 2 HW
engines was fully thought out. The current rules are:
* if no HW engine specific enable RPC is sent, use SW
* if a HW engine specific enable RPC is sent, use it
* If a 2nd HW engine specific enable RPC is sent, ignore
In this scheme there's no need for an RPC that lets the user
choose which engine to use because they already do so when
they enable an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I006ffb3b417f1e93bb061b29535d157ba66f03b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2033
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
NVMe spec defines "Keep Alive Timer" feature ID as optional and there
are targets that do not support this. SPDK fails to connect to such
targets.
This patch allows Get Feature "Keep Alive" target to fail with
INVALID_FIELD status. In this case we just continue with keep alive
timer value stored in controller opts structure. This value is already
communicated to target in CONNECT command.
Fixes#1328
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I52e7ea3cb66073ce6cc168a169989bd179041618
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1625
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Blobid and md_page is claimed as first step of blob creation.
If blob creation failed, both should returned to be used by
other blobs.
This caused multiple reports of:
"Metadata page 1 crc mismatch"
when loading blobstore due to md_pages not actually containing
the written out md pages.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I495452c578d879f749281cebf8975eb2c1c7f79a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2057
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In SPDK NVMe/TCP target, when initializing the socket, the low
watermark is set to sizeof(struct spdk_nvme_tcp_common_pdu_hdr),
which is 24 bytes. In our testing, some times there might be very
small data packet (as small as 16 bytes) be sent to wire. After
this, if there is no more data sent to the same socket, this small
data packet won’t be received by NVMe/TCP controller qpair thread
because the size hasn’t reached the low watermark. Because of this,
the qpair thread is waiting for more data come in and the initiator
is waiting for the IO request to be completed. Hence the delay
happens.
As the minimum data that allows target to determine the PDU type is
sizeof(struct spdk_nvme_tcp_common_pdu_hdr), which is 8 bytes, we
changed low watermark setting as below. With the change, the problem
was gone immediately.
Change-Id: I14ccc4c84b77e33a617726e7455304aca29d5d57
Signed-off-by: Wenhua Liu <liuw@vmware.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2138
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
reduce library uses unlink, but the unit tests need to
override it in a specific way.
But linking unit tests with LTO requires the wrapper
definitions be in objects/libraries listed *after*
the object/library that refers to it. So we need to
make the unlink wrapper somewhat generic. We do this
by exporting a string and callback function that the
user can set to enable a user-defined function to be
called when unlink() is called with a specific file
name.
Also revert 3ef6d06 as part of this patch, since we
no longer require the workaround that it implemented.
Fixes issue #1357.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1ee4c424ad31fe7d91d7b524ed47aedd279e5b5c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1948
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This typedef is already in the public header file.
clang complains about the redefinition, even though
it is identical.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iae10b6b752c25cedfe80275990a74cea9d5e0ae0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2135
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch also implements the new API for the 3 existing engines.
There was also some minor clean in one file, moving a function to
eliminate multiple forward declarations (there would have been
another one with this new API).
The next patch will use this API in the accel perf tool.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4ebc9cb3d1c588919235b5080cbeec29189efa21
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2025
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since ftl write buffers are associated with IO channels
there can be situation that block that is being relocating
could be still in cache. Such scenario is very likely when
ftl is throttling user IO. l2p update should handle such
situation when data is coming from relocation.
Change-Id: Id0bb53d8ce45213b05bafa9ebcb843ce8eadbc7a
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1439
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Zone in full state should have write pointer set to
the last block plus one to be consistent with internal
ftl write pointer tracking.
Change-Id: Ib81124e7a8451f8daec82d3d41dc55f6ed328ba2
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
OCF relies on our env to get information about free memory.
It then uses that information to return a descriptive
error if not enough memory is available.
But no other calculation done based on that value.
Our implementation was not correct because it returned
the size of available physical memory in the system,
while we use HUGEPAGE memory for most of OCF operations.
There doesn't seem to be a reliant API for getting
the size of available HUGEPAGE memory, so instead
return UINT64_MAX, as it is done in ocf/env/posix/ocf_env.h.
This way, OCF will not know ahead of time if there
is enough memory available, but it will still fail
properly on operations that require too much memory.
Change-Id: Iec2e3cfa8453253513d5861d7e6acf0e08dad1e9
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1976
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If the vdev is marked for hotremove, it is possible that the
name has already been freed resulting in a heap use after free,
so remove the warning about a vdev being marked for hotremove
to avoid a segfault when removing a device.
This was observed in the vhost fuzz tests.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I2891ca2bee70d72fb7b0dff96d569e9b92fe84eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2071
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
While in practice the qpair->ctrlr variable will not change within
the disconnect function, when the code is built without debug enabled,
gcc thinks that rctrlr may be uninitialized.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I355cd62f3a2baaba65d806e3746f615a0dc37f58
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2056
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Useful for transport specific layer to inform that Keep Alive is not
supported or to adjust granularity.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I636fda3eadcb96cd8a4b79570fc4e3cc6a58fe93
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1545
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Virtual controller capabilities can be overridden on transport
specific layer. The current behavior shall be preserved.
This can be useful to limit or extend the default based on transport
type.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I754f0d957a46f219adc1e55f792e79c7546ddb43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1274
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_conf_allocate() was not the best place to put
INI deprecation warning.
Depending on the application, config could be allocated
without passing config file.
This resulted in app framework applications to print
this error on startup even without config file.
Much better place is spdk_conf_read() which requires
a file to be passed. Then and only then, deprecation
warning is printed with this patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I75979655880f9273dfe5ce65262f08934df596cc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2051
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This needs to be done for all qpairs in the poll group.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic3a84713a3f9941f90613152328d06ac8c1f586b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1954
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: To set the priority of the NVMe-oF connection especially
for TCP connection.
For example, the previous example can be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420
With the change, it could be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420 priority:2
The priority is optional. We try to change
spdk_nvme_transport_id but not in spdk_nvme_ctrlr_opts since
the opts in spdk_nvme_ctrlr_opts will reflect in every nvme ctrlr,
this is short of flexibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I1ba364c714a95f2dbeab2b3fcc832b0222b48a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1875
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: This is used to make users can specify
some options on the socket, e.g., the different priority for the socket.
While creating sockets, the priority needs to be set before connect()
and listen system calls, so better to add one parameter in spdk_sock_opts
which can contain options (e.g., priority) in spdk_sock_listen_ext and
spdk_sock_connect_ext functions.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I406238e9da7abd69f937b7072535a19124ed0169
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1874
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Operation of locating right lba from cluster map
is done on I/O path. Instead of division and multiplication,
perform bit shift operation.
Bit shift is only used when pages per cluster is power of 2.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic3ed7ec0a82867a8a4bc6391785b9d40c800aacb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1724
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For the NVMe interface virtualization, we are developing the
MUSER as the replacement for vhost_nvme target, before the
MUSER solution be merged to SPDK, here we still maintain
vhost_nvme for the coming 20.04 release.
Change-Id: Ife117474330bf9e3fab1071dae2beb0f6897dff8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1936
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If we fail to allocate all of the params, we should free
the ones we did.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0f0be6320b27211e3713d9b79b5a0b0ed103e7d2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2007
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
In practice, the reactor pointers will never be NULL
in these cases, but some static analysis tools don't
realize that.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0657959e5572df2741398b179907f2bbf0b02b3b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1984
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
spdk_scsi_dev_get_lun will never return null when we
ask for lun 0, but some static analysis tools complain.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I09aa8e03c28f1a3448f68d6f4d9aa6e7003c4c1b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1983
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
We were referencing the response before checking if it was NULL.
fix kw warning #10387
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I333d13a8f16874a35d7de8e6659125f3bee83c13
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1980
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
g_spdk_iscsi_opts is encapsulated and not directly accessed by outside
of iSCSI library. So do not add it to the map file of iSCSI library
and remove it from the map file of the shared build
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib9202891813208329ec6b3b0e076e4f608a38ef9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1895
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Multiple nmvme_io_msg producers on the ctrlr share the same ring.
After freeing it, it should be set to NULL. In order to prevent
either nvme_io_msg_ctrlr_detach() or spdk_nvme_io_msg_process()
from interacting on freed memory.
Above happened when resolving issues in later patches.
After their respective fixes, there is no scenario that
solely reproduces this failure so no tests were added in this
patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I72b695d995b63bd002cc03e60cd4bdc82cfbe8ae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1917
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This buffer was not released after failure to enqueue.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If84317c67626a3193851c90be056b8550a5fccee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1916
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previous to this change it was possible to register
same nvme_io_msg_producer twice. This kind of functionality does
not make sense in current scope of it, as each message to/from
io_msg_producer does not have identifier other than this pointer.
In case of nvme_cuse this allowed creation of multiple /dev/spdk/nvme*
devices and caused an infinite loop when detaching an nvme controller.
This patch disallows that and adds test for nvme_cuse.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5f56548d1bce878417323c12909d6970416d2020
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1938
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adjusts several return codes to provide
more than just -1.
Along with fix to json rpc error print,
where negative error code was passed to spdk_strerror().
Resulting in unkown error being reported.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I254f6d716d0ce587f88cc658163ba049378f3b2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1915
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is no indication right now that this function couldn't be called
by multiple threads on different controllers. However, internally it is
using two globals that can become corrupted if the user were to do this.
Put a lock around them so it is safe.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I59361f510eb1659c2346f1fd33c375add1dc9c81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1903
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was changed to better facilitate thread safety.
In next patch a lock will be held when going over the
cuse devices list.
Now user is expected to pass a buffer of a sufficient size
that will be filled with ctrlr or ns cuse device name.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3202ef285e427111e3595389619463fda58dbef6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1978
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unregistering nvme_cuse when the device did not exist
resulted in SEGFAULT within nvme_io_msg_ctrlr_unregister().
To prevent that, when no nvme_cuse is registered for the
ctrlr do not unregister nvme_io_msg_producer.
RPC and spdk_nvme_cuse_unregister() now return an error.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id77cebe23ff91023a24cfe091f5f62a76a9175fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1921
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds nvme_cuse_get_cuse_ctrlr_device() and
nvme_cuse_get_cuse_ns_device that returns
struct cuse_device of a given nvme controller or namespace.
Similar iteration was used in two places so they were
replaced accordingly.
Next patch will add third.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I25ada843a59c632fe330263a65456d25c5ccf4cc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1918
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Docs, RPC, unit tests, etc., will follow. Notes:
* The current implementation will only work with VFIO.
* The current implementation supports only the existing accel
framework API. The API will be expanded for DSA exclusive features
in a subsequent patch.
* SW is required to manage flow control, to not over-run the work queues.
This is provided in the accel plug-in module. The upper layers use public
API to manage this.
* As we need to support any number of channels (we can't limit ourselves
to the number of work queues) we need to dynamically size/resize our
per channel descriptor rings based on the number of current channels. This
is done from upper layers via public API into the lib.
* As channels are created, the total number of work queue slots is divided
across the channels evenly. Same thing when they are destroyed, remaining
channels will see the ring sizes increase. This is done from upper layers
via public API into the lib.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ifaa39935107206a2d990cec992854675e5502057
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1722
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Module, etc., will follow. Notes:
* IDXD is an Intel silicon feature available in future Intel CPUs.
Initial development is being done on a simulator. Once HW is
available and the code fully tested the experimental label will be
lifted. Spec can be found here: https://software.intel.com/en-us/download/intel-data-streaming-accelerator-preliminary-architecture-specification
* The current implementation will only work with VFIO.
* DSA has a number of engines that can be grouped based on application
need such as type of memory being served or QoS. Engines are processing
units and are assigned to groups. Work queues are on device structures
that act as front-end groups for queueing descriptors. Full details on
what is configurable & how will come in later doc patches.
* There is a finite number of work queue slots that are divided amongst
the number of desired work queues in some fashion (ie evenly).
* SW (outside of the idxd lib) is required to manage flow control, to not
over-run the work queues.This is provided in the accel plug-in module.
The upper layers use public API to manage this.
* Work queue submissions are done with a 64 byte atomic instruction
* The design here creates a set of descriptor rings per channel that match
the size of the work queues. Then, an spdk_bit_array is used to make sure
we don't overrun a queue. If there are not slots available, the operation
is put on a linked list to be retried later from the poller.
* As we need to support any number of channels (we can't limit ourselves
to the number of work queues) we need to dynamically size/resize our
per channel descriptor rings based on the number of current channels. This
is done from upper layers via public API into the lib.
* As channels are created, the total number of work queue slots is divided
across the channels evenly. Same thing when they are destroyed, remaining
channels with see the ring sizes increase. This is done from upper layers
via public API into the lib.
* The sim has 64 total work queue entries (WQE) that get dolled out to the
work queues (WQ) evenly.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I899bbeda3cef3db05bea4197b8757e89dddb579d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1809
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch fixes the bug in
commit d421876f98.
We had passed not xconn but conn caressly by mistake to
_iscsi_conn_drop().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifc2313923bc0e94b967e4ba2eca4255ddcc4611b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1988
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is executed on hot path for I/O. Inline it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6ded0dd3c15e81954350a9eb372156e9d38f87e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1725
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes more sense within the context of the nvme driver and
helps us avoid the awkward situation of getting a failed_qp callback
on a qpair that simply hasn't been connected.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ibac83c87c514ddcf7bd360af10fab462ae011112
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1734
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is really useful when the intent of failing the qpair is to
do something like fail over to a different controller structure
and we want back completions for everything outstanding from the
admin queue.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Icbfdf855ddb1a380da7b9036ab5da6faab862e00
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1815
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By aborting all requests from every qpair when it is disconnected,
we can completely avoid having to abort requests when we enable the
qpair since nothing will be left enabled.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Iba3bd866405dd182b72285def0843c9809f6500e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1788
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is the onlyreasonable thing to do. Plus we need to
be in the destroying or disconnecting state to avoid
an infinite loop when aborting requests.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I38462a01f0455c3d6496434626f6f2f4663bf508
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1857
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we destroy a qpair, we need to flush all of the I/O.
But some applications will try to resubmit that I/O. We need
to not re-queue those I/O while in the context of the destroy
call so as to avoid an infinite loop.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I3e4863a563d461092f6e6b4a893f965f41bf34e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1856
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This can cause infinite loops if the callback tries to
queue an additional I/O.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4b80b97d334082465d9228b799ef901645fa968e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1854
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The state should be changed and checked by the transport
layer. All transports should follow the same list of steps
when disconnecting/reconnecting.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If2647624345f2c70f78a20bba4e2206d2762f120
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1853
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The qpair states should be maintained at the generic level.
Always going through the transport disconnect function is
one step in that direction.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I019b2b4a14fe192eff5293f918d633dde2c5400a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1851
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This variable really indicates when a qpair is
no longer connected. So NVME_QPAIR_DISCONNECTED is
actually much more accurate.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ia480d94f795bb0d8f5b4eff9f2857d6fe8ea1b34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1850
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Updating conn->state had not been guarded by any mutex. When SPDK
iSCSI target has multiple SPDK threads, iscsi_drop_conns() may update
conn->state by a thread different from the thread of conn->pg.
This patch ensures conn->state is updated by the thread of conn->pg
by sending a message to the thread.
This fix is not perfect but connection reschedule is done only once
per connection when moving to the full feature phase. So this fix
will be simple and enough for now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I500474a27659438473b0eea598d35c90624a1d10
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1930
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
This allows us to hide the implementations of
g_subsystems and s_subsystems_deps within the
libraries themselves.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I60716b9465b58d6cdb3a43262a7ded844bd80eda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1786
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is part of a larger effort to remove the g_subsystems and
g_subsystems_deps variables from the spdk_event map file. The
implementation of those variables should be internal to the
library.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I3c2c04933859c6c484a903e666df10f810b26709
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1785
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There were 9 function symbols removed from the global list
of the library. They were all symbols declared in env_internal.h
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I23210f27dc2bf23ae9e9cf76babb54e623fbc917
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1708
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This should help reduce confusion within libraries about
which APIs are public and which are private.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I7755081b016f269d4761d8cc2ce4bac2835c077d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1703
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Also, increment the library version since some non-public symbols have been removed.
Please note, SPDK_LOG_BLOBFS is included in the map file because it is used by the
blobfs_bdev module.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib05c0b6630951d97b1a5b2931746471eeb9d9630
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1702
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Deprecating INI tyle configuration has been a long time coming.
Feature parity is there between JSON-RPC and INI, which should
enable the switch.
All major applications support the JSON-RPC and tests were
moved to the JSON-RPC.
With above in place, it is time to give an explicit notification
to INI config users regarding the lack of support for INI.
In future release the INI configuration will be removed,
until then feedback from users is welcome on any
suggestions how to make the transition smoother.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If47375371791646f2afd06762b9bf6c5b8e009ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1941
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since the related feature is already contained in
spdk_sock_listen and spdk_sock_connect functions,
we no longer need this function.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1eafff0d139fa266a355fbee2bf0fc3947db69fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1876
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Purpose: Fix the unbalanced allocation of socket connection.
Suppose we have 4 spdk threads, then there will be 4 sock groups,
each on one spdk thread. And When using the NAPI_ID, each
sock group will be responsible for one NAPI_ID.
For example,
Poll group: A, B, C, D,
connection with NAPI_ID: 0, 1, 2, 3.
However if connection with NAPI_ID 2 exits first, and we will allocate
socket A (with the roundrobin manner, But not C again). So to avoid
this, we choose lazy free.
Since when the sock poling group is close, it will free them
finally in spdk_sock_remove_sock_group_from_map_table. So
there is no memeory leak, but eliminates unnecessary allocation/dellocation
on spdk_sock_placement_id_entry.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9bbc9139c8f8f3999eab7cd9259db2d683bd8466
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1873
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is called on hot path for I/O, inline it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iec40033eac19f2c66c2984623acb5e157a5ffe05
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1723
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Commit 9ad044c4 remove the offset parameter in nvme_pcie_ctrlr_alloc_cmb()
and uses spdk_vtophys() to get the physical address of the submission
queue, however, the memory isn't registered to SPDK yet, so use the
offset to get the physical address again.
Change-Id: Ida0f4a8bf1e72d6446fba442a1b71f0ddaab4bb8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1933
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Hit assert when completion is done is response to internal connect
cmd. Fix by outstanding counter incr, add missing err handling.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I2ba71f83432831fc043f2b6f6a5cba024045068b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1902
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When iterating SGL segment, we can use existing virt_addr parameter
to return UINT64_MAX as a special value to indicate this segment need
to be described as Bit Bucket SGL.
Currently only READ command is supported, we can enable the WRITE
and COMPARE support when necessary.
Change-Id: I50aa2b226ec3449c13ed1d97b3224ee8e7de95a8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1467
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the request contains separate metadata buffer, we should set
PSDT 10b when hardware SGL is supported and dword alignment is
required. SPDK driver doesn't provide SGL metadata data buffer
APIs for now, the separate metadata buffer is alway contiguous,
so we can put the metadata buffer into a data block SGL entry.
Change-Id: I9ccfce755a3169cd2c9b908e4da76081155d9613
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1466
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The rdma_disconnect call triggers an RDMA_CM_EVENT_DISCONNECTED
message on the target side. The hope is that the target side will
reply with the same message in a reasonable amount of time. If the
target doesn't have that mechanism implemented, print an error message
and continue with the process.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I164a3538714fa3adfc306ea0c88220ea710e7c39
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1879
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This also lets us get rid of the set_ibv_state function
since rdma_disconnect does the transition to the error
state for us.
rdma_disconnect triggers an RDMA_CM_EVENT_DISCONNECT on the
initiator side. This is important so we know when qpair ids
can be reused on the initiator side.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I87b80797c84ffa1d2cbe94cf37316b1b674b6c74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1878
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
As soon as we disconnect the qpair, the initiator can submit an
additional request to connect a qpair with the same qid as the
one we connected.
This series is aimed at making sure we don't acknowledge a disconnect
until we have cleared that bit.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I76d9312448a9740911465c146a195996cc567370
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1880
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Historically, we have immediately called the qpair
fini function directly from _spdk_nvmf_qpair_destroy.
However, to fix a race with initiators where we can get
a duplicate QID from the initiator, we will have to clear
the QID bit before calling qpair_fini. Clearing the QID bit
must be done on the controller thread, so we have to pass at
least two messages between calling _spdk_nvmf_qpair_destroy
and qpair_fini. This leaves a gap where we can poll the poll group
and reap completions for the qpair before we call qpair_fini and drain
all of the requests related with the qpair.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I337a0608f88fdda132b8a629a508c0263d2261c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1881
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As other small change, function iscsi_conn_pdu_generic_complete()
had been declared in conn.h but defined in iscsi.c. Move the
definition of it to iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1bd796288036f78a7cba8a1c0af93bd6bc19e9cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1890
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_iscsi_tgt_node_reset() is not implemented and the code to
call it is commented out. We will have to implement them from scratch
if we do. So remove them in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I63618b0f8857cb23b57f5a92ec363a91c1d5a912
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1885
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
