Asan reports memory leaks from CRYPTO_zalloc which
seem to be caused by openssl library.
See https://github.com/spdk/spdk/issues/2947
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I964acc8ae8c3a6978ea01a0235a32661ffbc74c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17217
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
xfsprogs refuse to create fs smaller than 300MB since:
https://git.kernel.org/pub/scm/fs/xfs/xfsprogs-dev.git/commit/?id=6e0ed3d19
To make sure mkfs does not fail, increase bdev size to 512MB.
Change-Id: Ic313db06cfab43f13f43a269c9cc058391bfb8ad
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17214
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an API to easily determine if a blob is an esnap clone, similar to
what already exists for snapshot, clone, and thin_provisioned.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ie07cd09b30513893e82f1c85e94a24a93c79d71e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16862
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
When consumers open a blob with spdk_bs_open_blob_ext(), they can set
esnap_ctx in struct spdk_blob_open_opts to have that context passed
to bs->external_bs_dev_create().
Change-Id: I0c1a9cec0e5aed5ef2a7143103e822cbe400aabb
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14971
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This job is already done by the target test. Also, this makes sure
that nvme_ns_manage_cuse is always executed (note that we don't
consider it as a test to be skipped).
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I6d964230e4d961152912b1f8a0636712039eeae6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17080
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use it in the nvme_cli_cuse to make sure proper drive was selected
for the test (i.e. supporting ns management) - some of the nvmes
installed in the CI pool don't support ns management, hence all
related commands fail as part of these tests.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ib93933d7ee9b0d2eb283313d3f2bbb6f4af727a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17079
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
They have exactly the same conditions, no need to keep it separate
for now.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I6826ffe7b70e3d502f483cf1966930586a6f9f0b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16934
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Richael <richael.zhuang@arm.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In order to do so we need to make sure that freq is lowered for
all thread siblings of a given core. Since DPDK and/or dynamic
scheduler do not take that into the account we need to do this
on our own.
Find thread sibling of the main cpu and imitate the DPDK's governor
work by adjusting its freq settings.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I154a2a789903b66c2722160d7e252221083f5e3c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16930
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
During resize, we correctly determine if we have enough
md_pages for new extent pages, before proceeding with
actually allocating clusters and associated extent
pages.
But during actual allocation, we were incrementing
the lfmd output parameter, which was incorrect.
Technically we should increment it any time
bs_allocate_cluster() allocated an md_page. But
it's also fine to just not increment it at the
call site at all - worst case, we just check that
bit index again which isn't going to cause a
performance problem.
Also add a unit test that demonstrated the original
problem, and works fine with this patch.
Fixes issue #2932.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iba177a66e880fb99363944ee44d3d060a44a03a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17150
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: 阿克曼 <lilei.777@bytedance.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
If blob_freeze_io() is called twice in a row,
and the second time occurs before the for_each_channel
for the first completes, the second caller will
receive its callback too soon.
Instead just simplify the whole process, always do
the for_each_channel and don't try to optimize it
at all. These are infrequent operations - correctness
and simplicity are in order.
A few additional changes:
1) Make same changes for unfreeze path.
2) Add blob_verify_md_op() calls, just to be sure
these are only called from md_thread. This was
already checked in calling functions, but as these
functions get called from new code paths (i.e.
esnap clones) it can't hurt to add additional
checks.
3) Add unit test that failed with original code, but
passes with this patch.
Fixes issue #2935.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibefba554547ddf3e26aaabfa4288c8073d3c04ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17148
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Community-CI: Mellanox Build Bot
This function can be used to kill all lingering vhost and qemu
processes that might have been left behind by vfio-user|vhost
tests.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I17121f416e26732d53b5dfec0f010e5db8bd369f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15186
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Also, add at_app_exit() to make sure that all vhost and qemu
instances are terminated as well.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I917f1cb1b02d18b78a482d754a19f509e580fc98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15185
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Now that all crypto operations are using interfaces that support memory
domains, bdev_crypto can report support for memory domains.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I13a128a599f6560197fed3405599c2a6bb609703
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This will stress the accel chaining code just a little bit more.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If08625b8606a021a3494eb4aa8527d2b338bd255
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17040
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is quite common for a user to use the exact same iovec (in memory) to
describe buffers for two different operations. If that iovec was
describing accel buffer, accel would modify it replacing it with an
actual buffer. This is broken if that iovec was used by some other task
in a sequence, as accel wouldn't be aware that it has been changed too.
To address this, accel will use a new iovec from the aux_iovs array. It
means that accel buffers always *must* be passed using a single iovec.
Theoretically, users could chunk that buffer into several iovecs, but
spdk_accel_get_buf() always returns a single buffer, so, in practice,
this should never happen, and therefore is unsupported.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I25271bc032987dd6028fb7b3adde061657759b4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17039
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
All these callbacks look identical now, so there's little point in
having three different functions doing the same thing.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I60d1426b5d2b20d924776699885e6a9dd176504a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17024
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
After changing to spdk_accel_append_*, this code is no longer necessary,
as accel operations are now executed by the base bdev/bdev layer.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2e31249dfdf7abeee420744a5cc75b8273ecbad9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17023
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Similarly to reads, writes path is now also using the spdk_accel_append*
interface for performing encrypt operation.
Additionally, this patch also changes the way aux buffer is allocated -
spdk_bdev_io_get_aux_buf() was replaced with spdk_accel_get_buf(). This
ensures that the actual data buffer will be only allocated if it's
actually needed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I3cd1d4f5753a95709d7b81de23d9227102a74261
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17022
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
The new spdk_accel_apend_decrypt() interface is now used for all read
requests for decrypting data. This makes it possible to chain decrypt
operations with other operations in a sequence. Support for encryption
in the write path will be added in the following patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2f65044eeaf92232d839ddd166ae50889b3f386d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This patch enables passing accel sequence for read requests. The
handling is pretty similar to writes, but the sequence is executed after
a request is completed by a bdev module.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I79fd7d4873265c81a9f4a66362634a1c4901d0c9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16975
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
It is now possible to submit a write request with a sequence of accel
operations that need to be executed before actually writing the data.
Such requests will be directly passed to a bdev module (so that it can
append subsequent operations to an accel sequence) if that bdev supports
accel sequences and the request doesn't need to be split. If either of
these conditions are not met, bdev layer will execute all the
accumulated accel operations before passing the request to a bdev
module.
The reason for not submitting split IOs with an accel sequence is that
we would need to split that accel sequence too. Currently, there's no
such functionality in accel, so we treat this case in the same way as if
the underlying bdev module didn't support accel sequences (it's executed
before bdev_io is split).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I66c53b3a1a87a35ea2687292206c899f80aaed4a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16974
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This channel will be used to execute accel operation sequences.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ied4bb57d14a50a923908ffb13ef4ba34ca65175c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16972
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
We *really* don't need to fill the whole bus with virtio-blk
controllers, the intention is just to verify that they can be created on
two different buses. So, instead of looping through 33 devices, specify
two addresses that will translate to bus 0 and bus 1.
This significantly reduces the amount of necessary resources needed for
this test.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6d60bd0fa840596d2231f50fc10ccde6b47ac60e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17032
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
we can get sessions information by vhost_get_controllers
Signed-off-by: zhipeng Lu <luzhipeng@cestc.cn>
Change-Id: I8e63aea64d02b3467a62f30a712e1dcbf6fb8854
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16315
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
When a blobstore consumer creates or loads a blobstore, it should be
able to set a per-blobstore context pointer that will be passed back to
the consumer via bs->esnap_bs_dev_create().
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I59c0ebe21eaf65c3d79a4ac3469715283f56313a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14970
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This may cause unwanted intermittent issues depending on how long
dnf syncs its repos - on occasion it takes too much time leading
to job timeouts under the CI. As an alternative, look under a specific
path to see if dpdk{,-devel}.rpm are already in place and install
them locally - VM images on the CI side will be already provisioned
with all needed dependencies.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ic924574889b52d521db4799cbb12b4c238a2fe3a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16304
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
This structure can be allocated on the stack
where needed
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I92b7e777d4718c5f2dd1c09e8f1bed8fd6e6caf8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17075
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvme_ctrlr_disable() and nvme_ctrlr_disable_poll() were added almost a
year ago but they did not have any unit test.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I4d9abe37e5aea18893509776b54de495a407ba67
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17000
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add command dword 13 field to the extendable structure
spdk_nvme_ns_cmd_ext_io_opts. This now enables us to pass dspec
and dsm fields.
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Change-Id: Id4d3dac14fdbf0e2a57e0bf287551dfd827dd503
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16945
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Removed bdev pmem implementation and makefiles
Removed bdev pmem rpc calls
Updated Python scripts
Updated match files for tests
Updated doc files
pkgdep and doc files will be updated when pmem
dependency is removed from libreduce
Change-Id: Ia1be5046159e04cd933ac13a0d5791e6d28219da
Signed-off-by: Marcin Spiewak <marcin.spiewak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17070
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add default copy command support in bdev layer for backing devices that
does not support copy command.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I5632e25544e95ac0c53ff91c4cd135dac53323ae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16638
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When IBV_EVENT_DEVICE_FATAL & RDMA_CM_EVENT_DEVICE_REMOVAL occurs,
destroy qpair immediately and do no assume that no successful WQE will
be received after rdma_disconnect.
Signed-off-by: sijie.sun <sijie.sun@smartx.com>
Change-Id: I23e44dd32c8adea301e5251659b1be519f5dfdf7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16314
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
IB device may be unplugged & hotplugged when modifying slaves of bonding
IB devices. This patch will try to recreate ibv device contexts, poller
and listeners after IB devices come back.
Signed-off-by: sijie.sun <sijie.sun@smartx.com>
Change-Id: I3288174bad847edc2d9859cb34aa93c6af8c673b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15616
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Patch 55f947933 ("bdev: remove spdk_bdev_ext_io_opts from spdk_bdev_io")
changed the way bdev_nvme submits IO to the NVMe driver causing
performance degradation for requests with iovcnt = 1, as they also had
to go through the path that executes the reset_sgl/next_sge callbacks.
This patch reverts those changes back to the original code checking
iovcnt and using the non-SGL functions if possible.
Suggested-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5e7c6620d38b7690ff862d8cd0075afacc578217
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16961
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This is the beginning of support for external snapshots. An external
snapshot is a read-only blobstore device (struct spdk_bs_dev) that can
be used as a blob's back device. Normally a blob will have no back
device (a normal blob), a zeroes back device (a thin provisioned blob),
or a blob back device (a clone blob). When a blob has an external
snapshot ("esnap") as its back device, it is called an esnap clone.
With this patch, esnap clones can be created but they are not yet
useful. Subsequent patches in the series will plumb the IO path, enable
various features, and allow lvol bdevs to be esnap clones.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I29206b628a2b03b6386a88532565e228df988e0e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14969
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Perform all tests on devices that do and do not support
spdk_bs_dev::copy.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ic4c13ade9f45709b34a57f9fb7456d6c6a790a85
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16691
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This reworks how blob_snapshot_rw() tracks the number of bytes read and
written. It has no functional change: it simply makes the patch that
follows less complex.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ieeb738b6a814e7939931fecdfaf14b9f162d8431
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16861
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If the bs_dev was opened read-write, continue to take a
read-many-write-one claim. If it was opened read-only, take a
read-many-write-none claim.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I25d977c6961f962423899fb891ec912cd847930a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16282
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
External snapshots, which will be introduced in a later commit, will
need read-only blob_bdev instances. This support is partially needed to
support underlying devices that are naturally read-only and partially to
provide an extra layer of protection against accidental writes.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ibcb28d00ad644a6053aa5f4de15471c2cd8e348a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch removes references to deprecated PMEM from accel library.
The code that was executed when ACCEL_FLAG_PERSISTENT flag is set,
is no longer needed and is removed.
_sw_accel_copy() function is removed and replaced with memcpy(), as
after PMEM removal its functionality is the same as memcpy().
_sw_accel_dualcast() is no longer needed, replaced with direct calls
to memcpy()
Removed 'flags' parameter - it is no longer needed
accel_ut.c: removed references to PMDK
deprecation.md updated
ACCEL_FLAG_PERSISTENT flag will be removed in next patch.
Change-Id: I86130466fe7a5f6ee547df1517b803035ff41a7a
Signed-off-by: Marcin Spiewak <marcin.spiewak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16899
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1.We should get current scaling governor from sysfs for comparison
2.The file name is scaling_governor not scaling_governors
Change-Id: I758b88d6b05a5d4b58bd103bfec8dfcb64453a5f
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added cppc_cpufreq case in set_cpufreq.
Change-Id: I8a7ceeb2891a9464a858b0d4ed1e3350b7ad1dc6
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
idle.sh sometimes fails because the app_thread's idle time is less
than busy time.
For rpc "framework_set_scheduler dynamic" will initialize the dpdk_governor
which finally call rte_power_init. This process is time consuming on some
systems which may make app_thread busy.
We can allow the app_thread to be busy for the first sample. This is one
solution. It also works if we call sleep for some time after calling rpc
framework_set_scheduler.
Change-Id: Ia2f4b2f35e94657ce093ce261438ab710399435a
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16825
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Patch rte_thash_x86_gfni introduced in change
4dcb94480b turned out
to be not unified as required so patching causes errors
in upstream vs-dpdk CI jobs.
The current master dpdk version is 23.03.0-rc1 and it
contains changes from the patch so we have to check for
all versions less than (not less-equal) 23.03.0.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ie4d3a829bcd91ca07659388094bda2d61f7c1584
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16914
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
If a driver is registered and selected, it'll now be used to execute
sequences of accel operations. The driver has priority over accel
modules, so the modules will only be used to execute operations that the
driver cannot perform.
Once driver completes a task (or a number of tasks), it notifies accel
using standard spdk_accel_task_complete(). To let accel continue
processing a sequence, driver can call spdk_accel_sequence_continue().
This can be done when the driver executes all tasks (1), an error occurs
(2), or the driver doesn't know how to execute a given opcode (3). In
case of (3), that operation will be executed using appropriate accel
module and, while the rest of the sequence will be sent back to the
driver.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If414c02073ffc731454e03d25c7ee02bef58463b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16548
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In particular, cache cntlid, nsze and ncap to make sure namespaces can
be properly created and attached to. The test was assuming that the ns
should be attached with a controllers' list always set to 0, however,
that doesn't have to be the case for every nvme (the difference was
noticed under SAMSUNG MZQL21T9HCJR-00A07). Same goes for the formatted
block size where we cannot assume it's 512 bytes as it depends on the
active lbaf.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Iac9902052e8b2db44ede2b5178372d65c07b5b4a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16580
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These are just wrappers around nvme cli used for caching ctrl and ns
features.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I61b784a0a29e121ce813c1b405a56a07b4d859b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16579
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
When we select CPUs for the scheduler tests we pick up all siblings
from given core. On some nodes in the CI these threads may have IDs
in ranges that simply overflow during the shift operation ( > 62).
To avoid this, use a list instead of a mask. Also, deny all threads
with IDs > 127 as DPDK doesn't support them anyway.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ib83649a762cb31a460184d1e0b594c112aea2bab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16604
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Mainly, don't trigger them on ERR, simply on EXIT - the ERR is
reserved for the main tracing trap set by autotest_common.sh and it
should not be overwritten.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I435d1c08c29557692c134a087350f8538ebf92f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16708
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Without it, this test fails under nvme ctrls which do report UUIDs
for their namespaces.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I8f0137f8ce57f44c49f1708c8599a52e8092c262
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16707
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also test a case when opening an lvol fails due to insufficient
resources.
Change-Id: I8b1b7a9c4d67e93691f89541374c7ef09a7d3f18
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16944
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Under latest kernels the cmb* attributes are not present under the
sysfs anymore. See:
https://bugzilla.kernel.org/show_bug.cgi?id=217037
this is a regression that was fixed in 6.2 kernel. Until we jump to
that release, we need to have a workaround in place.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ia659518224899cbb3e9cef19681a457c945a9c96
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16776
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fix for number of dwords which is 0 based as per spec.
Use bitwise operators instead of division and modulus.
Change-Id: Ib315bf9394ef599317f41429742e7b8054069549
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16814
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These were used only for the sake of installing ref repos which the
check_so_deps tests were dependent on. This task has been moved
entirely to spdk-abi, hence they are not needed anymore.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I78f00a3cc701cbebbd451b0e720091c8bad27c5f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16879
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There's no point in keeping track of the extra path and pollute the
global bash profiles with it. Just put the target binary under the
/usr/local/bin which most distros, including centos7 keep in their
$PATH.
Also, drop the proxyconf mention as we are not using it anymore.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I2a531fb140aea4c87ad8c3f053a39d262d2d02ae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16853
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
This affects CYP systems where the cpus do indeed
support these instructions.
Apply this patch, when building SPDK with external DPDK
(versions <23.03.0)
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I9aded9014c6887e9c0f838b28cef5a0e9c42eda5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16829
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Undetached poller cause timeout when `spdk_thread_exit` has
been called and detaching it in same thread make poller to stuck
on `spdk_nvme_detach_async`.
`spdk_nvme_detach_async` call `nvme_pcie_ctrlr_delete_io_qpair`
which is synchronous making it to wait for response indefinitly.
Fixes#2798.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: Id500841f9c8fd9847e64805864cb136c74b003f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15650
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The {logical,physical}_block_size may actually differ (physical can
be bigger than logical) so always use the smallest available unit -
the hw_sector_size is an actual alias to logical_block_size and it's
also clearly indicating what unit sgdisk is working with.
In case the physical_block_size differs, the resulted partitions may
have different size than expected. For instance, under nvme with
512/4096 layout, the partitions were ending up 128MB in size instead
of 1GB causing the dmsetup to fail (as it expects to join partitions
1GB in size each).
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ib6d3afd3471af2c2e9a5ced17004dd9c565708c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16551
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Under CI's phy systems, there are nvme namespace devices which are
== 2GB in size. This require some overhead as the test creates two
partitions 1GB each + the partition table.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I9d0a5bbbd2cb61bc98bf1a1569229c156dfaac70
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16777
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove libuuid usage on FreeBSD and add dedicated implementation of
spdk_uuid API using functions from the standard library.
Fixes: #2878
Change-Id: Ie49ccb2842acad6064bffd789e4f64b7365b6e5c
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16558
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
An example of async operation which can be handled on specific
transport layer could be creation of spdk thread followed by
a poller registration.
This change also aligns with transport destroy which is already
async operation.
Current transport create function is marked deprecated and is meant
for transports supporting sync create only to maintain backward
compatibility. Async version supports both create operations.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I1f5a477819e58f30983d26f81a1416bed1279ecf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16463
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
After multipath tests are finished we were waiting up to 40s for
bdevperf to finish. It doesn't test anything, besided the fact that we
can do IOs for 40s after changing to an optimized path. To reduce test
time, simply kill bdevperf immediately after multipath tests are done.
There's no need to check the status of the perform_tests RPC, as we also
check bdevperf's exit status, so we're bound to catch errors anyway.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I73fee92c8bd65d780659332de7ddb5f68c5f14d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16665
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It fixes the test when the repository is in a directory with spaces in
its name, e.g. "/foo/bar baz/spdk".
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I07e8ce8eac50e0222c85f9ceb6088d69e02592f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16770
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This should help debugging issue #2865. Additionally, moved the trap
code to a separate function, as it was getting too large.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ieb4881cdfed4e5d88e38859fa0807b673a87913b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16664
Reviewed-by: Michal Berger <michal.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The spdk_bdev_ext_io_opts structure is used to pass extra options when
submitting a bdev IO request, without having to modify/add functions to
handle new options. Additionally, the structure has a size field to
allow adding new fields without breaking the ABI (and thus having to
bump up the major version of a library).
It is also a part of spdk_bdev_io and there are several reasons for
removing it from that structure:
1. The size field only makes sense in structures that are passed
through pointers. And spdk_bdev_ext_io_opts is indeed passed as a
pointer to spdk_bdev_{readv,writev}_blocks_ext(), however it is
also embedded in spdk_bdev_io (internal.ext_opts_copy), which is
also part of the API. It means that each time a new field is added
to spdk_bdev_ext_io_opts, the size of spdk_bdev_io will also
change, so we will need to bump the major version of libspdk_bdev
anyway, thus making spdk_bdev_ext_io_opts.size useless.
2. The size field also makes internal.ext_opts cumbersome to use, as
each time one of its fields is accessed, we need to check the size.
Currently the code doesn't do that, because all of the existing
spdk_bdev_ext_io_opts fields were present when this structure was
initially introduced, but we'd need to do check the size before
accessing any new fields.
3. spdk_bdev_ext_io_opts has a metadata field, while spdk_bdev_io
already has u.bdev.md_buf, which means that we store the same thing
in several different places in spdk_bdev_io (u.bdev.md_buf,
u.bdev.ext_opts->metadata, internal.ext_opts->metadata).
Therefore, this patch removes all references to spdk_bdev_ext_io_opts
from spdk_bdev_io and replaces them with fields (memory_domain,
memory_domain_ctx) that were missing in spdk_bdev_io. Unfortunately,
this change breaks the API and requires changes in bdev modules that
supported spdk_bdev_io.u.bdev.ext_opts.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I49b7524eb84d1d4d7f12b7ab025fec36da1ee01f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16773
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Format LBA size (FLBAS) is updated to have:
Bit 3:0 as least significant 4 bits for format index
Bit 6:5 as most significant 2 bits for format index
NVMe format command fields are updated accordingly.
Add a new helper function to fetch the correct format index.
Update examples and unit test files accordingly.
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Change-Id: I2d6d9045b9d65ae91cb18843ca75b59cc27ed2f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16515
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Fix compile errors on older gcc versions (reproduced
on gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0).
The error is: initializer element is not constant.
Signed-off-by: Slawomir Ptak <slawomir.ptak@intel.com>
Change-Id: I3f56304649b141b6422d84257cdc386c5cb14cc4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16718
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Although they are all correct. I suggest to unify, so it looks more normalized.
Change-Id: I61ee92b2ac9f2260851e0d7e28ebaea8783423f6
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15172
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Branches other than "main" are kept in a separate repository
named "dpdk-stable".
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: Icf38d2bbf7f9943a66f1ee1d6c033a77e3b2e481
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16433
Reviewed-by: Michal Berger <michal.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
That way, we are sure that each test case starts with the same, clean
state of the g_seq_operations array and we don't need to manually zero
out each individual value.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6a45499a87480b0803f3af52c9e22b3bb68e9996
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16547
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It makes it possible to check the number of times a task was submitted
to be executed by a module, even if we defined a submit() function for
that opcode.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id6b592b0461c722bf22ab04d5bad1a7542bb17e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16546
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This loop produces a LOT of logs, which aren't very useful, so silence
them to reduce the clutter in the logs.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5032c2c5bc309f8b29455349adf7063c7e9d50cc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16648
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Apply this patch, when building SPDK with external DPDK (versions 22.11.0+).
Change-Id: I0a09dbe6b4ee9519d51a0b4cb881844b96d94779
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16702
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
This change is already present in the upstream, no need to patch it
ourselves anymore.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I12c9eb59ee202a7e240542876a51977ef2f2d4ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Starting in SPDK 23.01, calling spdk_bdev_register() and
spdk_bdev_examine() from a thread other than the app thread was
deprecated. This commit removes the deprecation and as such calling
these functions from a thread other than the app thread is an error.
As a side effect of this commit, all bdev module examine_config() and
examine_disk() callbacks will be called on the app thread.
Change-Id: Idaae06608101e2a513d9312ac5544ffe94effe4a
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15826
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
With the introduction bdev module claims v2, existing consumers should
transition off of v1 claims. This transitions blob bdevs from v1
exclusive writer claims to v2 read write once claims.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I1884585a540fa17ee341430e03de3c4f5d35322b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16168
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a unit test to ensure spdk_bs_bdev_claim() takes an exclusive write
claim and it is released when the destroy callback is called.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ia5185545b148a8a83315c688a9c99a16b199063a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16230
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This creates a minimal test for module/blob/bdev/blob_bdev.c.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I04698863f3228a27f73a90d50f0d5fbde30c0870
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16229
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The original implementation of bdev claims allows a module to establish
an exclusive writer claim on a bdev that has other descriptors open for
writing. This is arguably a bug. With claims v2, this bug does not
exist. The conversion of spdk_bs_bdev_claim() to claims v2 exposes this
bug in the vhost_negative test.
This patch removes an extraneous vhost_scsi_controller_add_target RPC
call that left Malloc0 open read-write while bdev_lvol_create_lvstore
tries to create an lvstore on Malloc0.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I963e210e1bc033d8720e240760004ed8aef7fda3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16169
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
If multiple claims exist on a bdev, examine_disk() is called for each of
them.
Change-Id: I0a6dc3e4bd1da20bbcbddf97a16e04c62c82354c
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15290
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This implements the v2 claims API. Compared to the original v1 claims,
v2 claims:
- Support read-write-once, read-write-many, and read-only-many claims.
- Are claimed with spdk_bdev_module_claim_desc().
- Are associated with a bdev descriptor that is passed to
spdk_bdev_module_claim_bdev_desc().
- Are released upon close of the bdev descriptor used to obain the
claim.
- Cannot be taken when a descriptor other than the one passed to
spdk_bdev_module_claim_bdev_desc() has write access.
Later commits in this series are needed to fully integrate them with the
bdev subsystem.
Change-Id: I39a356f5893aa45ac346623ec9ce0ec659b38975
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15288
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Due to a problem described in github #2886, we
were not able to run verify payload with big IO
and big queue depth. This problem was fixed with
iobuf utilities, so now we can increase queue
depth in this test.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I7b8935d17411c260ba416608444106684c17a0cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16602
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Otherwise the cmd fails due to the lack of config.mk. This forces
autopackage.sh, test_make.sh, etc. to be executed in the environment
where SPDK was already built which shouldn't be really a hard
requirement as they always re-build the SPDK for their own purposes.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ie3971acbf354734ed9c5c72d49bb93fc2ccc45f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15743
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Also, keep it in global scope as $spdk_conf rather than passing it
as a positional argument to whatever routine that may depend on it.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I68532d5848e0bd7ee8519ef3e308b24ab6a38876
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15724
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
New option is introduced as well, 'ext', which tells autobuild to
run only external code tests - these deserve to have their own option
as they require proper env to be in place (access to hw, hugepages,
etc.)
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I2d74d1ee9b4b3d4dd83150b235eceff76fafd1ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15723
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_bdev_unregister_by_name() is safer than spdk_bdev_get_by_name() +
spdk_bdev_unregister(). It is ensured that the specified callback is
executed after unwinding stack for spdk_bdev_unregister_by_name().
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I5cc1e88a7e389ab173ef1195bd817d2aac6a70d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16556
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For JSON RPC, boolean response with false value may not be regarded as error.
Previously many cases were replaced to use
spdk_jsonrpc_send_error_response() explicitly. However, this pattern did
not become established and new bdev modules used
spdk_jsonrpc_send_bool_response() with false.
Once again, replace remaining cases in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie8858bc8ff7c36bc3a829977044a91d459db76f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16555
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The next patch will improve media mgmt notifications but it will be
almost same as _resize_notify() and _remove_notify().
On the other hand, there are a few differences between _resize_notify()
and _remove_notify(). _remove_notify() will be better.
To avoid duplication, unify _resize_notify() and _remove_notify() by
adding abstraction event_notify() and _event_notify().
Add unit tests for the complex race conditions.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ibe2478479c61459c0da0db8d28c7273f05275e0f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16577
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This function is an alternative to xtrace_disable() which works
within a smaller scope, i.e., per cmd. Useful to quickly hide
verbose output without disabling entire tracing.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I284eafaf0e74764f329a7a6897a7d7fa85176de7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16363
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is done in order to speed up entire lookup and be more robust
with matching target processes. This implementation also tries to
detect processes executed outside of the local repo workspace - this
is most relevant for the CI where lingering processes may come from
different jenkins workspaces (i.e. executed by different jobs).
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Id4f62302701f064ad00906497379e16ff8c04993
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16356
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
