This just verifies a modest setup.sh's output which is of little
relevance. On top of that, depending on the system's state, the
test itself may be flaky so get rid of it.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Icc918a0dbbb54067c281aa465a097c4e40a32e11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13827
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In some occasions the total number of available hugepages increases
by the account of reserved and/or surplus hugepages allocated by the
kernel. This affects the test where it ends up with bigger number of
hugepages then actually requested via setup.sh.
Hugepages overcommitting is disabled under CI nodes, however, this
issue spontaneously appears regardless. To rectify, add the extra
hugepages while checking the expected number + some debug to see the
state of meminfo in case the test still fails.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If30a422240045ac188a9175eeab7210351eb34a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13826
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By the default value, timeout might be too long to detect connection
failure by the end of the test. 512 milliseconds is too small to use
in production but is not so small for this case.
Fixes#2595
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9f1248b2812eb7625aa943878b022f0a151d4cbb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13908
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It's not needed. $bdevperf_pid is expanded when the trap is signalled,
hence it will always hold PID of the last value it got assigned to.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I89083667e0be5f3f0b0fd1745bfbfb38cb340c42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13922
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The contents of this file is not evaluated in any way, the test only
reads it back to stdout at different stages. Instead, just keep
bdevperf writing to std{out,err}.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ibd0caa101e895661224f8a969395eb018ece19dc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I23b206b026dec0cb9e91226aa2ee2de91eebde6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I0a9cd41f754f2d52a8caa936a7a7504b0091790d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13903
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There may be for_each operations outstanding on an
io_device when it is unregistered. Currently we just
return when this happens, not unregistering the
device but also not notifying the caller that this
happened (since it returns void, and the callback
function doesn't have a status parameter either).
We could just push this responsibility to the caller,
to never unregister an io_device if it knows it has
outstanding for_each calls waiting to complete. But
I think we can simplify this a lot by just handling
this inside of the thread library. Mark that the
device is pending registration, and unregister it
(on the original requesting thread!) when the
for_each count gets back to zero. Also don't
allow any new for_each operations either.
Note this requires a bit of refactoring on the
thread unit tests, since it is now possible to
unregister a device with outstanding for_each
operations.
Fixes issue #2631.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I978f2d99a25e65d2b7d71ce9b1926a79a6c94263
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13890
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This would allow for better control through the environment which
could be used by the CI.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Iaf94c82ccd7ce6851abb1ad4b7ebf76d686e3608
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13898
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Here "-m " is not used or related.
so remove it.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic8700bd0a262bb70b6116bbee86330eece5c03b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13879
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This follows e380263ba1 - all CI nodes have been updated to an image
which ships with that particular version of vfio-user QEMU.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I2029f48014868366881790a4e258190e3f83b0d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13894
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When decoupling a snapshot from its parent, we need to clear its parent.
So we should remove the xattr BLOB_SNAPSHOT. Modifying the xattrs of a blob
only works if its metadata are not in read-only mode.
By default, a snapshot is in read-only mode so this operation fails. When we
later want to delete the snapshot, we will see that it has a parent, so we will
try to remove the snapshot from its parent's clones list. This will cause a
crash.
The fix is to remove the BLOB_SNAPSHOT xattr only after setting the snapshot's
metadata in rw mode.
Signed-off-by: Alex Michon <amichon@kalrayinc.com>
Change-Id: I80efa6dd3dcb38b4c738ce2e97aa2ffc281cefa5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13723
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Older compilers (e.g. 7.5 on ubuntu1804) are having issues under
v1.16 due to:
plugins/intel/intel-nvme.c:666:47: error: initializer element is not constant
static const int LATENCY_STATS_V4_BASE_VAL = (
Makefile:108: recipe for target 'plugins/intel/intel-nvme.o' failed
This was fixed by the following commit which is present in the v2.0
release:
e7309044f3
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I7ebcf1b1fdb44500a21bcf3feceb07a722e8fc30
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13775
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The reconnect timeout test case expects a socket READ error
to trigger the reconnect poller in bdev_nvme module, but
we use the `verify` IO workload to send IO requests which
may cause the client doesn't receive any error, because
it will send WRITE commands first.
Fix issue #2595.
Change-Id: Ibc6b534d157552cdb2b55a03c869e254ec4c462e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13840
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
the sizeof(g_vals) should be the num of array, not the num of bytes. see follow:
CU_ASSERT(spdk_json_parse(g_buf, sizeof(in) - 1, g_vals, sizeof(g_vals), &g_end, flags | SPDK_JSON_PARSE_FLAG_DECODE_IN_PLACE) == num_vals);
Fixes#2623
Signed-off-by: tongkunkun <tongkunkun_yewu@cmss.chinamobile.com>
Change-Id: I3b7994606284fe3464650337ecb0f723a627f7aa
Reported-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13841
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Parameter `num_queues` for virtio_scsi PCI device means
maximum number of queues, it SHOULD include the `eventq`
and `controlq`, while for `vhost_user` RPC call, it means
the number of IO queues, so here we use it as `max_queues`
in lib/virtio and add the fixed number queues for `vhost_user`
SCSI device.
Also fix `vhost_fuzz` to get `num_queues` earlier than
negotiate the feature bits.
Change-Id: I41b3da5e4b4dc37127befd414226ea6eafcd9ad0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In prep for upcoming patch that will provide an RPC to override
and automatic assignment of an op code to an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I17d4b962fb376a77f97ce051a513679d0fba698e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12829
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK has no control over how the interrupts work in the network stack.
SPDK can only group connections together based on their NAPI ID. So
remove this check from our tests. It's only going to result in
intermittent CI failures.
Change-Id: If8e6214b7d6c5aa4df99101612b98aa43d45b459
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These are only called back-to-back and they're both configuring the
driver.
Change-Id: Icc07df1cf23d67954ac3621647b050d4c8c74e64
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
scope
Some of these names were hard to tell if they were common utilities or
ADQ test functions. Clarify the names.
Change-Id: If6998c3ea996ad6fef0a87a33c90d665c9accaa8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13830
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also display the log when error happens.
Change-Id: I09040a2fee2379e7506701c7cb558f0d26a5de65
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13805
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is another preparation to create and use ibv_context and pd.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Id594fa1ccb2daf535b1aaaef0a397bda2ec98578
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13710
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case user sets --test-conf="" the pkgdep/git still forces
bpftrace installation under fedora35 and newer. Avoid this to
make sure user has a clear view on what's being installed (and
what not) in respect to defined cmdline arguments.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I8b60fe9044d1ab593b3c1acaf1b40dde22acee2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13607
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The test uses exisitng SPDK tests workflow for performing
series of tests for vfiouser subsystem on live QEMU instances.
For testing purposes it sends series of gRPC methods calls
that are serviced by the SMA and subsystems and then uses
the regular SPDK RPC interface to verify its effects on the application.
SSH connection to VM is used to verify that changes took place.
Signed-off-by: Milosz Linkiewicz <milosz.linkiewicz@intel.com>
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I38258c1a3f9ee3e457ef0426cdc6feff2f38d729
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11999
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This workaround is needed to be able to build refspdk under newer gcc
shipped with fedora36.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I1f6f8bbe5f64bd281536ff30761fb7cf4bd046fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13787
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This workaround is needed to be able to build refspdk under newer gcc
shipped with fedora36.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I5baeaae98db79649bbd96f9fbe5a6dcffdf5cfda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13786
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This attempts to fix builds under f35 where newer kernel requires
the https://review.spdk.io/gerrit/c/spdk/spdk/+/13404 patch to
be present in both the release and LTS build.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ie2a70ae9cb9ca6d2d495ea2cf5729fcffb60d593
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The function `nvme_ctrlr_init_ana_log_page` is exactly
same with `nvme_ctrlr_update_ana_log_page`, so remove it.
Change-Id: I1ad51635f47cf95cfa6de217e3b9144885c3b74e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13652
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The match run against btest.out.match expects to find only single
nvme in the configuration, however, some CI nodes may come with
multiple nvme drives causing this particular test to fail. To
mitigate this, make sure to create config with only a single nvme
bdev.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ifa390269b0e0a040b1aea752735c2692cbabac6b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13762
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is done in order to mitigate the following issue:
https://github.com/spdk/spdk/issues/2596
which has been frequently breaking CI. Since failure occurs while
trying to terminate spdk_tgt, remove it from the equation completely.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I9eb2423079ec0717b9b094ccb372adabac614463
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13802
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
allow DSA device to async offload crc32 calculation in nvmf-TCP
This patch can use DSA to accelerate crc32 computation, making
the io performance of TCP paths using crc32 approach the io
performance of TCP paths that do not use crc32.
Using SLIST to minimize the performance drop. SLIST has less
operation compared to TAILQ.
Thinking about memory thrashing, we should use the same memory as
possible to receive new PDUs. So, insert newly freed PDU in to head
is better.
The performance drop is within 1% compared to the TCP path without
crc32.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I480eb8db25f0e730cb198ca5ec19dbe3b4d38440
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11708
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Original implementation creates pollers and CQs for all discovered
devices at poll group creation. Device (ibv_context) that has no
references, i.e. has no QPs, may be removed from the system and
ibv_context may be closed by rdma_cm. In this case we will have a CQ
that refers to closed ibv_context and it may crash in ibv_poll_cq.
With this patch pollers are created on demand when we create the first
QP for a device. When there are no more QPs on the poller, we destroy
the poller. This also helps to avoid polling CQs that don't have any
QPs attached.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I46dd2c8b9b2902168dba24e139c904f51bd1b101
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When a bdev is registered, it is examined by the bdev modules before the
bdev register even is notified.
Examination may be asychronous, e.g. when the bdev module has to perform
I/O on the new bdev.
This causes a race condition where the bdev might be destroyed while
examination is not finished. Then, once all modules have signaled that
examination is done, `bdev_register_finished` makes an invalid access to
the freed bdev pointer.
To fix this, defer the unregistration until the examine is completed by
opening a descriptor on the bdev.
Change-Id: I79a2faa96c1c893fc1cee645fbe31f689b03ea4a
Signed-off-by: Nathan Claudel <nclaudel@kalray.eu>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13630
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
abidiff gets confused if a data structure in a
private header files is changed, if there is also
a public header file with the same name. So avoid
this by forbidding private header files from having
the same name as a public header (i.e. one in
include/spdk or include/spdk_internal).
This was mostly already handled by using names like
nvme_internal.h, but we did have a few conflicts
which were causing our check_so_deps.sh script to
sometimes indicate a version bump was needed when
it really wasn't.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I90895efd22c1594044f3c3f9344bb3a67a754c4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13728
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This avoids confusion with the public idxd.h
header file which causes problems with abidiff.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7910c93d9d95b99c82f4dfdba845e6804e1b6568
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13729
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When `dif_insert_or_strip` is enabled, NVMf library will do
DIF insert and strip automatically, client isn't aware of
it, when `dif_insert_or_strip` is disabled, we will report
Namespace E2E Protection Capabilities to client, but we
don't process PRACT and PRCHK flags in NVMf library, so
here we don't report the capabilities to client and leave
the use of extended LBA buffer to users.
Change-Id: Ic610dc65fef210a7799c6ab693d89138b99e1193
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12165
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some of the options in sock_impl_opts could be different for different
sockets (even if they're using the same impl). However, outside of a
few selected options (recv_buf_size, send_buf_size), there was no
interface to change them.
This change will allow users to change impl_opts on a per-socket basis
when creating a socket. Sockets created through accept() inherit
impl_opts from the listening socket.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7628ae19def25cef6ffa62aa54bd34e446632579
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13661
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Also remove ftl_mngt_get_status() because it won't be necessary now.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I335831cb1c506379e9afeb0bf87f1f873033073d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13668
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Suppress werrors when building nvme-cli as they are
redundant for SPDK in general
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I173eae198db5cfc26cbc6b75aa36b0aad8077a79
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12229
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
