There may be multiple C2H data pdus recevied.
So we should use the following steps:
1 Use the SPDK_NVME_TCP_C2H_DATA_FLAGS_LAST_PDU
to check whether it is a last pdu or not.
Then we will not cleanup tcp_req, i.e., tcp_req->datao
will not be cleaned.
Then use the SPDK_NVME_TCP_C2H_DATA_FLAGS_SUCCESS
to check whether the controller will use resp pdu
or not.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9dccf2579aadd18f31361444e25bd4b3b76f06c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9192
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch makes use of async_fini_start flag to
make fini_start asynchronous.
During this time all lvol stores which have no open
lvols are unloaded. This is required, since lvs
holds claim on the underlying bdev.
Fixes#1630
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If443cb087324d08a4a70df71c7afd930ab654f90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9095
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Callback for bdev modules is called 'module_fini',
meanwhile after its execution bdev modules were to call
'spdk_bdev_module_finish_done()'.
This function carries incorrect name, so it was deprecated
and replaced with 'spdk_bdev_module_fini_done()'.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9a12dff746ea8b4b1570a3794470f7b24e29003e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9148
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will be done in stages. This patch adds the
nvme_tcp_ctrlr_connect_qpair_poll function and and makes the icreq step
asynchronous. Later patches will expand it and make the
nvme_fabric_qpair_connect part asynchronous as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ief06f783049723131cc2469b15ad8300d51b6f32
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8599
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Just add a single .gitignore file in test/unit
that covers *_ut. That allows us to eliminate
100 .gitignore files in the test/unit directory
hierarchy.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia190587b4d5c6f1847471be27550cbfb843dc01e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9235
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We could not restore the setting of ana_reporting because it was not
included in the JSON config dump.
Add the parameter ana_reporting into JSON config dump by adding and
using a new helper function nvmf_subsystem_get_ana_reporting().
Besides, previously the JSON RPC nvmf_subsystem_get_listeners had
ana_state regardless of the value of ana_reporting. We make it
conditional in this patch. The JSON RPC nvmf_subsystem_get_listeners
had not been used in the test code in the repository. Hence this
change will be acceptable.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4e04600c969c254e0a816d3eb34983ee951091e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9111
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Once bdev finish starts, bdev unregister is called on all
unclaimed bdevs. This means that for lvs with at least one
lvol present, there will be a corresponding bdev unregister.
Yet the vbdev_lvol module does not attempt to unload the lvs,
once last lvol from that lvs is unregistered. Leaving
the base bdev for lvs claimed.
This patch fixes that by using fini_start callback from
bdev_module to mark when shutdown begins. After that
last lvol unregistered on lvs will unload it.
Expanded struct lvol_bdev to contain lvol_store_bdev.
Closing the lvol will free spdk_lvol, so lvol->lvol_store cannot
be accessed.
Changed ut_lvol_destroy UT to ut_bdev_finish. Previous UT didn't
really test vbdev_lvol_destroy, but 'hotremove' of the lvol bdev.
In effect there is no hotremove of the lvol bdevs (only lvs bdev).
spdk_bdev_unregister() can only be called from within vbdev_lvol,
or during bdev module finish.
This UT will now check the bdev module finish.
Note that at this point lvs with no lvols will not trigger
lvs unload. Next patches in series will introduce async fini_start,
to allow for the unload.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8f51e8c1fcfdc55a5d090a3bc84ccefda813aef8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9093
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Instead of calling vbdev_lvol_unregister() hooked up
to the destruct callback, use spdk_bdev_unregister()
directly.
The spdk_bdev_unregister() is always asynchronous
and callbacks are delayed until spdk_bdev_destruct_done().
This is now corrected in the stubs.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I50683c71be80b1baa8bf3b39a05ca631ac527c2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9155
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The new API is used if bdev ext_opts is not NULL.
Change-Id: I414b5d19bff54114d6708efed89ba19b5955f56a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
These functions accept extendable structure with IO request options.
The options structure contains a memory domain that can be used to
translate or fetch data, metadata pointer and end-to-end data
protection parameters
Change-Id: I65bfba279904e77539348520c3dfac7aadbe80d9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Add a global list of memory domains with reference counter.
Memory domains are used by NVME RDMA qpairs.
Also refactor ibv_resize_cq in nvme_rdma_ut.c to stub
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie58b7e99fcb2c57c967f5dee0417e74845d9e2d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8127
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Memory domain is used to describe memory which belongs to
another address space (e.g. GPU memory or host memory)
Memory domain can be configured with callbacks to translate
data to another memory domain and to fetch data to
local buffers.
Memory domains will be used in extended
bdev/nvme API added in the following patches.
Change-Id: I0dcc7108a4fbf416a11575aa5cf5d7ec501b3d8b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8126
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
If a qpair is part of a poll group and it's not configured in the async
mode, it should be using poll group's process_completions variant.
Additionally, connecting qpairs to the poll group was moved up, so that
qpairs are already on the connected qpairs queue when waiting for the
connection to complete.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I08f75bd61a566d1ab60029b6202d9337df75733f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9074
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Replaced poll cycle count with a timeout when destroying a qpair that is
part of a poll group. Tracking the time instead of a poll count is more
stable, as the number of poll cycles can vary based on the application's
behavior when destroying a qpair.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7445bc1b411f2905aab7bf3dc7b2d3344712e1eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9200
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Number of active namespaces may change. So, on ANA log page update we
should check if buffer has to be resized.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I1720317ea7f59e5afef73d5c4bd1cd69a7dd6520
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Log page reading function 'spdk_nvme_ctrlr_cmd_get_log_page' does read
into intermediate buffer and then copy to user provided buffer. So,
there is no need for user buffer to allow DMA.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I7337afa99c3ae666cc43ea2a48317de875334cfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9177
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
async_mode option is currently supported in PCIe transport layer
to create io qpair asynchronously. User polls the io_qpair for
completions, after create cq and sq completes in order, pqpair
is set to READY state. I/O submitted before the qpair is ready
is queued internally. Currently other transports only support
synchronous io qpair creation.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib2f9043872bd5602274e2508cf1fe9ff4211cabb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8911
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_reactor_set_interrupt_mode() writes/reads from fds created during
reactor_interrupt_init(). Since spdk_fd_group_create() depends
on eventfd, this will not work for systems that do not have it.
reactor_interrupt_init() handled lack of support for eventfd correctly,
while spdk_reactor_set_interrupt_mode() did not check for it.
Reported-by: Nick Connolly <nick.connolly@mayadata.io>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5181d436636c55cca3a06b1947e944502a9204ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9131
Reviewed-by: Nick Connolly <nick.connolly@mayadata.io>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The current num_md_clusters doesn't include the the part before
md_start. So the bs_recover will get more num_free_clusters than it
should be. This patch can fix it.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I911926beb69aca677da508ba71f292496c917e7f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9034
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The generic transport layer still does a busy wait, but at least
the logic in the PCIe transport now creates the queue pair
asynchronously.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Change-Id: I9669ccb81a90ee0a36d3f5512bc49c503923b293
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8910
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Patch below broke the UT due to not accouting for changes
in nvme_cuse since original submission:
(19f0bfd) test/nvme_cuse: cases for stop cuse
The change was introduced with:
(d651f8a) nvme/nvme_cuse: Fix race condition in cuse session
Now when initalizing nvme_cuse controller it uses is_started,
to avoid race condition.
The UT was missing this part of nvme_cuse controller initalization.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I46344977204c3383d8f400c80bc7df50e6d7581d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9001
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using `bs_allocate_and_copy_cluster()` instead of a zero-length write
makes it possible to inflate/decouple snapshots, as the writes would
fail with -EPERM, because the snapshots are marked as read-only.
Additionally, zero-length non-vector requests are now completed
immediately. It makes it consistent with the vector path (which already
does that) and allows us to use the zero-length reads as a context for
cluster copy.
Fixes#2028.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib7fdee352972ecf808833aa179820d85cfab7eed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8918
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Implemented nvmf code to allow transports to use ZCOPY. Note ZCOPY
has to be enabled within the individual transport layer
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I273b3d4ab44d882c916ac39e821505e1f4211ded
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In bdev_nvme_reset_ctrlr(), get a controller reset context and start
a poller that calls spdk_nvme_ctrlr_reset_poll_async() to perform the
controller reset asynchronously.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I1e3ae42291c3b43b69c99ca56997dc1965c3ac59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In rte_power all that enabling/disabling turbo does is allows
for additional entry in frequency array for particular core.
Instead of exposing this API through spdk governor,
just make sure that dpdk_governor enables turbo by default.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I994b326a57c01889bccea26635753c56637259d2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Those calls went unused, in favor or much more useful
up/down/min/max variants.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I432896196a1a6edfc6799c8658df49567f73d457
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8788
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove _spdk_scheduler_disable() to avoid confusion as there is
no spdk_scheduler_enable function. Since spdk_scheduler_disable
sets scheduler period to 0, use spdk_scheduler_period_set(0) instead.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4f1390a635f80e8b92775aa4be2e37f5b95467f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7448
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
There is only one g_scheduling_reactor (main core), the is_scheduling
flag for it is used to block starting new gather_metrics before
previous one is finished.
Meanwhile is_scheduling flag on other reactors was used to block
destroying lw_threads while scheduling happens. It was only needed
because scheduler interacted with the same lw_thread pointers as
each reactor. Previous patch removed this dependency, instead
spdk_thread ids is used. If an spdk_thread is destroyed,
while scheduling _threads_reschedule_thread() handles it.
It is no longer required to block destruction of lw_threads
based on this flag.
Instead of using the main core reactor flag, a g_scheduling_in_progress
is introduced.
Removed _spdk_get_scheduling_reactor() and instead shared the value
of g_scheduling_in_progress between reactor.c and app.c.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ica57326a552477add522174cc3e96b3bab918350
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8732
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Functions that set reactor interrupt mode were not tested
since _spdk_get_app_thread() always returned NULL and
implementation did not verify the RC.
This patch will return a thread from scheduling reactor
as the app thread. Which is not exact, but otherwise
a new app thread would have to be added to each UT.
spdk_reactor_set_interrupt_mode() requires the completion to
be executed on app_thread. Added the poll of that thread
to make sure it gets drained.
Since now the UT actually executes the code path,
additional 4 events will be processed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0793e6dcc41c447dc11ed8ab28eb9041c5d82628
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8409
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Scheduler and governor tests polled events till completion,
but depended on exact number of events and repeated those
calls multiple times.
This patch adds _run_events_till_completion() which will
run all events scheduled, until there are no more to process.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iab3af2e031510b095ddfcc93d2320bbdc7d84aeb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8408
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fixes#1933
When decoupling parent the updated parent_id was
not persisted to the blob if it was a snapshot.
Due to having md_ro set to true, blob_set_xattr()
failed.
Later on the incorrect parent_id could cause troubles
like in the github issue, when deleting that snapshot.
This patch adds return code check for blob_set_xattr
and forces md_ro to false during blob md sync.
Since some of code paths are shared between decouple,
inflate and clone operations, the final callback for them
is doing revert of the original md_ro.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If017455f72e4d809fe533d9f986e5ae6bb8e2035
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The specification says:
"A host may replace its reservation key without regard to its registration
status or current reservation key value by setting the Ignore Existing Key
(IEKEY) bit to '1' in the Reservation Register command."
So for this case we treat it as a new registrant, also add UT to cover
the added cases.
Change-Id: I5990f15da36706063a35565d110ed4c6eb30a3f3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In test_spdk_nvmf_ns_event, when doing ns resize it will call
spdk_for_each_channel() to pause the subsystem. But it doesn't call
spdk_io_device_register() in advance. This is wrong and may run into
assertion with the coming change since the io_device is not found.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I077b41f812266248c39fdbdb8cdff352d3b4cb74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8767
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Use the macros for red black tree provided by Free BSD to speed up
io_device lookup.
This change was reverted once but is re-submitted because the critical
issue was fixed by the preceding patches.
In addition to the fix, add unit tests to verify the fix explicitly.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I97ed77f6e5ceacdf2593c9751b55a7d0b92c0b35
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8525
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Create a single nvme_bdev_channel for each nvme_bdev and each SPDK
thread. nvme_bdev_channel has a pair of nvme_ns and nvme_ctrlr_channel.
The pair of nvme_ns and nvme_ctrlr_channel will be aggregated by
nvme_ns_channel in the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I095a2d6afa4ea23a87e4452b2f9d4c7e0087abe0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6605
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This fix is as same as for NVMe bdev module.
If a ANA log page has two or more ANA group descriptors, the second
or later of ANA group descriptors will not be 8-bytes aligned.
Then runtime error would occur as follows:
runtime error: member access within misaligned address 0x612000000074
for type 'const struct spdk_nvme_ana_group_descriptor', which requires
8 byte alignment
nvmf_get_ana_log_page() in lib/nvmf/ctrlr.c creates a ANA log page
data and processes 8 bytes alignment correctly because we got the
same runtime error before. However, lib/nvme had been missed at that
time.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idaa610544dc5cb659c387fcd38a2b4b97cbd06e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8398
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
When ANA change event is notified, increment reference count, read
ANA log page, and parse it to update ANA states of namespaces.
Then remove the spdk_nvme_ns_get_ana_state() call and its stub in
unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I254ae6cb993694bf0d7f4fa4b1039b5f9243b5cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8335
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If ctrlr supports ANA log page, nvme_ctrlr allocates a buffer for ANA
log page and read ANA log page itself, and then each nvme_ns sets its
ANA state by parsing ANA log page.
Most code was brought from NVMe driver because NVMe driver already
supports ANA log page management. However it had a bug that assumed
each descriptor is 8-bytes aligned. Fix the bug together in this
patch. Besides, the implementation in NVMe driver was synchronous.
NVMe bdev module reads ANA log page asynchronously instead.
The next patch will support ANA log page update by AER handler.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib8eab887633b043b394a45702037859414b8e0a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8318
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch is used to add the support for users to configure
use kernel or userspace idxd library.
Change-Id: Ie159b897bc9595894ad8f333168efaea6c2a3d78
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7332
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch is used to add the kernel idxd support.
Without this patch, we can use userspace idxd driver
under accel_engine library (module/accel/idxd/accel_engine).
With this patch, we can also kernel idxd driver under the
accel_engine library.
Our approach is implementing a wrapper library to use IDXD
device by leveraging the kernel DSA driver in SPDK idxd library
(lib/idxd).
Then users can leverage the RPC later to configure how to
use the DSA device by user space driver or kernel driver.
In this patch, our approach is to use the idxd-config library
to export the WQs (Working Queues) exported by the kernel.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I3a25a4fe0327bd626bf6883dfbe54437d3209e51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7331
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There is no need to map the PRP/SGL list RW since this memory is never written
to. In fact, SeaBIOS might submit a request where the PRP list resides on
read-only memory, so attempting to map it RW can break things.
Change-Id: I7e4e90b1fa7e33e81b8d5cd8dcb9568c038938ec
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7288
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Nvmf/vfio-user uses this API to map NVMe command sent from
VM from Guest Physical Address to Host Virtual Address, so
now we moved this API from the nvme library to nvmf/vfio-user
as an internal API.
UT code will be added back in coming patch.
Change-Id: I54817fc9811ccd9ddd97b3aa6762a2fce4bbdda6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reset requests from the upper layer will reset the underlying
ctrlrs of a bdev ctrlr but internal reset requests will reset only
the specified ctrlr.
To clarify such difference, rename bdev_nvme_reset() by
bdev_nvme_reset_io() and remove the underscore prefix from
_bdev_nvme_reset() and related functions.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9a2d124f6e2039bfecfdd6599827354d6c373f2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will reduce the size of the following patches and improve the
readability.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2ff5a10622141466d6a0352b2a6387b1412cfbf8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8641
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Create an nvme_bdev by adding namespace to an attached controller,
and use bdev_nvme_submit_request() in the test case test_pending_reset().
This will reduce the size of the following patches and will increase
the test coverage.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb05952a53949e12562e9be3f6526b0f8ad57696
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8640
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This object is per I/O path and will be aggregated by an new upper
layer object.
Hence rename nvme_bdev_ctrlr by nvme_ctrlr. Then the following patches
will add nvme_bdev_ctrlr as a different upper layer object.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ieed634447785cc98140b3d49c52a2c753988ece7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8381
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This object is used for failover and per I/O path. A controller may
have multiple of this object. A controller is per path and may be
aggregated by an new object. Hence this object is a lower layer
object.
Based on the new naming rule, rename nvme_bdev_ctrlr_trid by
nvme_ctrlr_trid.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0d5e5812560a6947a0c25af05dea168e8745130e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8380
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
This object will be aggregated by the upper layer object nvme_bdev.
Hence based on the new naming rule, rename nvme_bdev_ns by nvme_ns.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I96a70213b29fb53437acd080a0787ec9f5a6759a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We will name the lower level objects starting with nvme_* and the
upper level objects starting with nvme_bdev_*.
This object is a channel per ctrlr and another new channel will be
added on top of this object.
Rename nvme_io_path by nvme_ctrlr_channel based on the new naming rule.
nvme_io_path will be used for a new object which is used to find an
optimal I/O path and to reset multiple ctrlrs sequentially when
multipath is supported.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1d4fa6d4625de3413d629a1ff412e00de12dfaf4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In cases when all cores are already doing too much work
to fit a thread, active threads should still be balanced
over all cores.
When current core is overloaded, place the thread
on another that is less busy.
The core limit is set to 95% to catch only ones that are
fully busy.
Decreasing that value would make spreading out the threads
move aggressive.
Changed thread load in one of the unit tests to reflect the
95% limit.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3b3bc5f7fbd22725441fa811d61446950000cc46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8113
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
NVMe specification defines namespace identification descriptors i.e.
EUI64, NGUID, UUID.
BDEV abstracts NVMe specific details that is why only UUID is exposed,
however if NGUID is supported it is prefered to identify namespace
with NGUID over UUID.
If NGUID is not supported by NVMe Controller then fallback to UUID.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: If51889a3664c0daa7cbe983048231793e3c502e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Returning an error from this function is not useful - there
is nothing the caller can do with that information. So
change the return value to void. Also add ERRLOG and assert
if a transport actually returns a non-zero status, to
force the transport implementer (which must be an out-of-tree
transport) to make changes as necessary.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I402afec045265db178af821d25b99a6dbe066eab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8659
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fixed warnings produced by gcc-11:
compress_ut.c: In function ‘test_compress_operation’:
compress_ut.c:726:9: warning: ‘_get_mbuf_array’ accessing 32 bytes in a region of size 24 [-Wstringop-overflow=]
726 | _get_mbuf_array(exp_src_mbuf, &g_expected_src_mbufs[0], SPDK_COUNTOF(exp_src_mbuf), false);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compress_ut.c:726:9: note: referencing argument 1 of type ‘struct rte_mbuf **’
compress_ut.c:430:1: note: in a call to function ‘_get_mbuf_array’
430 | _get_mbuf_array(struct rte_mbuf *mbuf_array[UT_MBUFS_PER_OP_BOUND_TEST],
| ^~~~~~~~~~~~~~~
Fixes issue #2013.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I04d0182169e61e87401f93f56993168d7aa42e43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8692
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This update will allow us to use spdk_nvme_detach_async() and
spdk_nvme_detach_poll_async() easier to aggregate multiple detachments.
Previously, we could do:
spdk_nvme_detach_async()
spdk_nvme_detach_async()
spdk_nvme_detach_async()
and then started doing spdk_nvme_detach_poll_async().
Hence aggregating multiple detachments is already supported.
After this patch, the following sequence is possible:
spdk_nvme_detach_async() = 0
spdk_nvme_detach_async() = 0
spdk_nvme_detach_async() = 0
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_async() = 0
spdk_nvme_detach_async() = 0
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_poll_async() = 0
The actual changes is to remove the variable polling_started from
struct spdk_nvme_detach_ctx because it is not necessary anymore.
Clarify this change via updating the header file and CHANGELOG.
Verify this change by unit test.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iebdf6c27c5304a2097b7084c315ccc99634ffa1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8468
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Recent work identified race conditions having to do with the
dynamic flow control mechanism for the idxd engine. In order
to both address the issue and simplify the code a new scheme
is now in place. Essentially every DSA device will be allowed
to accomodate 8 channels and each channel will get a fixed 1/8
the number of work queue entries regardless of how many
channels there are. Assignment of channels to devices is round
robin and if/when no more channels can be accommodated the get
channel request will fail.
The performance tests also revealed another issue that was
masked before, it's a one-line so is in this patch for convenience.
In the idxd poller we limit the number of completions allowed
during one run to avoid the poller thread from starving other
threads since as operations complete on this thread they are
immediately replaced up to the limit for the channel.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I913e809a934b562feb495815a9b9c605d622285c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8171
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Intention was for the threads to contain a single
core in the cpu mask.
This patch fixes it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8276cc906be53a7f8195d61c63bfa54bd2647b75
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8068
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move the definition of structure spdk_io_channel into
lib/thread/thread_internal.h, so we don't have to update SO_VER for
other libraries in future when we need to change the internal details on
the structure.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I3d2ca7a8737972e0b33ce92e464da42c48f89dec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8189
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The reference count of nvme_bdev_ctrlr will be used to update ANA log
page safely, and nvme_bdev_ctrlr_destruct() can be used to decrement
reference count after completing ANA log page update.
However, nvme_bdev_ctrlr_destruct() is not a good name for this case.
Furthermore, nvme_bdev_ctrlr_destruct() does not set the destruct flag
to true, and the next patch will need nvme_bdev_ctrlr_acquire().
Hence rename nvme_bdev_ctrlr_destruct() by nvme_bdev_ctrlr_release().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I285b7ab0963d0f4ea4a7a9fd29bd026d37ba8460
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8334
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Consolidate populate_namespaces_cb() calls for error cases into
connect_attach_cb(). Then remove ctx parameter from
bdev_nvme_add_secondary_trid() because it is not necessary now.
The next patch will inline _nvme_bdev_ctrlr_create() into
nvme_bdev_ctrlr_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia94f456df160c1cc874acac4c70aad27102cb0b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8314
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvmf_ctrlr_get_log_page used req->data to store the log page result.
While the req->data only contains the first iov, if req->iovcnt is
larger than 1, the req->data may not hold the complete log page; and
even worse, the log page result may be written to invalid address and
cause memory corruption.
Change-Id: Ie6415a6bd2327419fe4b32f21ac814fd827c9e95
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7970
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The common bdev layer will split large WRITE ZEROES ranges into
multiple children requests based on the backend device's setting,
it will try to split up to 8 children requests at a time to avoid
flood requests.
Also add UT to cover different cases.
Change-Id: Id9505fbe1c297412ef97b1f73587b22bc43f770e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7875
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This mutex is not used anywhere. After removing mutex from struct
spdk_scsi_globals, struct spdk_scsi_globals is empty. Hence then
remove struct spdk_scsi_globals. We can create struct spdk_scsi_globals
again if it becomes necessary.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I749ae43f7735a7c9383d090eae2093bb52607f17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
POSIX defines PRId64/PRIu64/PRIx64 for printing 64-bit values in a
portable way. Replace a reference to %lu to remove the assumption
about the size of a long.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Id5690eb2ad501eaacb4b266981b4dba128a7b174
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8340
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For receving the pdu, we add the crc32c offloading by Accel framework.
Because the size of to caculate the header digest size is too small, so
we do not offload the header digest.
Change-Id: If2c827a3a4e9d19f0b6d5aa8d89b0823925bd860
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7734
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
So far the schedulers had to calculate the diff of
current_stats - last_stats on their own to get tsc
from last scheduling period.
Renamed the current_stats to total_stats, but kept the meaning
as stats describing tsc for lifetime of a thread.
Instead change the meaning of the last_stats to describe
the tsc of only last scheduling period and change its name
to current_stats.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1a165ff7c1afe659b432c3127a351a96878d1f3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7843
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using the CMB for SQs is not a standard use case.
Performance can vary widely when using CMB for SQs
and is typically not the configuration used for
benchmarking.
So let's change the default value here to 'false',
users can still opt-in by setting this option to
true in the spdk_nvme_ctrlr_opts structure prior
to attach.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iab746ba777b04152ffb92fea2a2bb923a0a0bf21
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8227
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Set nvme bdev physical block size based value of NPWG and NAWUPF namespace
field.
The logic to set bdev phys_blocklen is based on how Linux nvme block driver
sets it. If the underlying nvme namespace supports NPWG/NAWUPF then bdev
phys_blocklen is set to min(npwg, nawupf)
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I6d254a9e730dccc230b9db4d1217bf7ab2f39b6c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8224
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Linking each unit test with spdk_trace allows for getting rid of lots of
stub definitions for the trace functions. The behavior stays the same,
as the trace calls result in no-op anyway because none of the unit test
apps enable tracing.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I904dac92205aadd644100af2c38989bb7979e47c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
And for some internal functions we need to pass controller
parameter so that we can do vtophys based on transport type.
Change-Id: I3ca4fa162ec9305f62b295ba21f7474c21edfe52
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8031
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
