Poll group has a list of the associated ctrlr channels to update
them when the corresponding I/O qpair is disconnected to do path
failover.
Another idea is that poll group has a list of the associated bdev
channels. However, two or more bdev channels may share a single
ctrlr channel and I/O qpair is per ctrlr channel. What we want to do
by this addition is to stop I/O submission to any failed I/O qpair
and choose alternative I/O qpair. Hence we take the first idea.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia287bd1b803313e66b8505a19694a40133b675f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8124
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previously nvme_ctrlr_channel had a pointer to a nvme_ctrlr and used it
throughout. However the use cases are not performance critical and
are better to convert from nvme_ctrlr_channel to nvme_ctrlr by
spdk_io_channel_get_ctx() and spdk_io_channel_get_io_device().
Provide a convenient macro nvme_ctrlr_channel_get_ctrlr() to do it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie22e8c318af88e09b95824c67b3e874d85425f1a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9195
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
bdev_nvme_find_admin_path() is used only in a place and it's role
is to find a non-failed ctrlr even after multipath is supported.
Inline it into bdev_nvme_admin_passthru() will be better.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If58507c49b43d047e1f3ef25bbdfb571c36a1956
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9194
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Previously bdev_nvme_reset() returned -EBUSY if ctrlr is being
destructed and returned -EAGAIN if ctrlr is being reset.
These did not match what spdk_nvme_ctrlr_reset() returned.
Reset operation will be more important than current when multipath
is supported and reset operation is made asynchronous.
Hence change bdev_nvme_reset() to follow spdk_nvme_ctrlr_reset().
bdev_nvme_reset() returns -ENXIO if ctrlr is being destructed and
returns -EBUSY if ctrlr is being reset.
Additionally change the return value of bdev_nvme_failover()
accordingly. After the change bdev_nvme_failover() returns -ENXIO
if being destructed and returns -EBUSY if ctrlr is being reset.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie2c6f8601050b1043d83de9cf01490751784e4e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8859
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following the last patch, include hostid into ctrlr_opts rather than
passing it as a parameter for bdev_nvme_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0d04db1c5767ec76a9a7cd255c3a8d56b0b8f583
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9344
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvme_ctrlr_populate_namespace_done() needs nvme_ns, probe_ctx, and completion
status.
When multipath is supported, nvme_ctrlr_populate_namespace_done() will
be called from the spdk_for_each_channel() callback. The spdk_for_each_channel()
callback can have one context and one completion status.
Hence nvme_ns or probe_ctx need to have another.
If an nvme_ctrlr has multiple namespaces, a probe_ctx is shared by
multiple nvme_ns.
So let nvme_ns has probe_ctx.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iedaaab80616d34d01935f4ebc31e1f3b84e09e32
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9047
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For multipath, when an new nvme_ns is added to an existing nvme_bdev,
we need to add the corresponding qpair to all existing nvme_bdev_channels
dynamically. The RPC bdev_nvme_attach_controller has to return after that.
Hence populating namespace needs to be asynchronous.
On the other hand, when an nvme_ns is removed from an existing nvme_bdev,
we need to remove the corresponding qpair from all existing nvme_bdev_channels
dynamically. Hence depopulating namespace needs to be asynchronous.
By the recent refactoring, two callbacks, nvme_ctrlr_populate_namespace_done()
and nvme_ctrlr_depopulate_namespace_done() were removed accidentally.
We need to restore these.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I37ea2420588cef3a18648dec053f8bd2b884e86b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9392
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A few functions can be made private in bdev_nvme.c. Hence delete
these function declarations from bdev_nvme.h.
Besides, bdev_nvme_remove_trid() is only a function declaration.
Hence delete it together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7bf9ae6da332c6426f6eb40926e7c4130d9acd8a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9444
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This only existed to share code between OCSSD and regular NVM
namespaces. Now OCSSD is gone, so just merge the files into bdev_nvme.
Change-Id: Idb73cc05d67144de5dd20af8db24c8f6974d10a7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9337
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvme_ctrlr_populate_namespaces
Avoid relying on this number. Different targets have interpreted its
meaning in different ways and it cannot be used anymore in practice. It
may also be very, very large.
Change-Id: I94e8eae49d6ccdbd8be302b30a120d89242b6d39
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9316
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Try to use these accessors instead of directly using the namespaces
array. This will make changing the data structure easier later on.
Change-Id: I3367d0e0065894f3aa199ed1698d27976b4cbbb5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9315
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If the number of namespaces is very large, this can cause excessive
memory allocation. This is especially true because when the number of
namespaces is large, it is almost always very sparsely populated.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I27d94956c222ae3c49c6a7422164ae3a8ec8d963
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9302
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Do simple validity checks first, then check for duplicate controllers.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ic21d64574b37a3d9148e5cd6d5a7599449ea8fe1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9341
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
It is more flexible now as it is possible to get nvme ns handle to do
additional management or queries, however if nvme ctrlr handle is needed
there is already public nvme API for that with nvme ns as an input.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I5493168ad31cc95687962288d57fb5457f2d7dd6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9357
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When preparing for a reset, use this new call to tell
the driver to avoid sending DELETE_CQ/SQ commands to a
PCIe controller when they aren't needed.
Fixes issue #2073.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9ebb7d5c3f7cbb1c3192f162f32edbbea41acde1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9250
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Matt Dumm <matt.dumm@hpe.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
There's only one type now.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I8fbf330797e772b1c45a04970c95bf4894c26639
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9348
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There's only one kind of namespace now that OCSSD is gone, so simplify
those whole path.
Change-Id: I721de11c3e7be8b3a13ada25b6d6163a67c6659f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9329
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As far as we're aware, this is not in use by anyone. OCSSD has largely
been replaced by ZNS and no OCSSD drives made it to the market.
Change-Id: I020ee277da5292f8c4777f224acafd87586f8238
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_nvme_create() is called only by a single caller and hostnqn is
just copied to ctrlr_opts even if it is passed separately.
Hence include hostnqn into ctrlr_opts rather than passing it as a
parameter for bdev_nvme_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I75b640bcecefa94950b0c19936fab0571c428125
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9332
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe bdev module will have two similar features, multipath and
failover when it supports multipath.
Take a case that we add two different trids with the same name by the
bdev_nvme_attach_controller RPC as an example.
The failover adds secondary trid to an existing nvme_ctrlr. The multipath
feature creates another nvme_ctrlr and adds it to the same nvme_bdev_ctrlr
which has an existing nvme_ctrlr.
We want to use bdev_nvme_attach_controller for both failover and multipath.
To do it cleanly, separate callback to spdk_nvme_connect_async() between
creating ctrlr and setting failover.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id9bc175af6201cdd74e12d4903fc81afe4f91189
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9225
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We get ext_opts by getting spdk_bdev_io from nvme_bdev_io in
bdev_nvme_readv() or bdev_nvme_writev() now. But this is not aligned
with the current design pattern and not so efficient.
We pass contents of bdev_io via parameters to bdev_nvme_readv() or
bdev_nvme_writev().
Let's follow it about ext_opts.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8a43f31934a36fa2d43800ec8bf17916edfca477
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9292
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
When an abort command completes successfully,
cdw0 bit 0 may be set to indicate that the controller
was unable to abort the specified cid. In that case
the bdev nvme abort completion callback needs
to reset the controller.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I42a5e96e19e113c38dec67c2d8575a11f39d41a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9320
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Converted log message to debug that is called too many times
during a hot remove, filling up the log file.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: I08f7ff7c36c6388270878291df8a1e83646e8aee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9258
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Callback for bdev modules is called 'module_fini',
meanwhile after its execution bdev modules were to call
'spdk_bdev_module_finish_done()'.
This function carries incorrect name, so it was deprecated
and replaced with 'spdk_bdev_module_fini_done()'.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9a12dff746ea8b4b1570a3794470f7b24e29003e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9148
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The new API is used if bdev ext_opts is not NULL.
Change-Id: I414b5d19bff54114d6708efed89ba19b5955f56a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
async_mode option is currently supported in PCIe transport layer
to create io qpair asynchronously. User polls the io_qpair for
completions, after create cq and sq completes in order, pqpair
is set to READY state. I/O submitted before the qpair is ready
is queued internally. Currently other transports only support
synchronous io qpair creation.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib2f9043872bd5602274e2508cf1fe9ff4211cabb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8911
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Implement bdev_nvme_reset_controller rpc, which allows the NVMe
controller to be reset over RPC. Implement bdev_nvme_reset_rpc()
which starts the reset of the controller and returns the result of
the controller reset via the callback function after it completes.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: Id98d5e56feb315b7e44e9bb5e5f495e9b1cd1de0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8456
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In bdev_nvme_reset_ctrlr(), get a controller reset context and start
a poller that calls spdk_nvme_ctrlr_reset_poll_async() to perform the
controller reset asynchronously.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I1e3ae42291c3b43b69c99ca56997dc1965c3ac59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Create a single nvme_bdev_channel for each nvme_bdev and each SPDK
thread. nvme_bdev_channel has a pair of nvme_ns and nvme_ctrlr_channel.
The pair of nvme_ns and nvme_ctrlr_channel will be aggregated by
nvme_ns_channel in the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I095a2d6afa4ea23a87e4452b2f9d4c7e0087abe0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6605
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
NVMe bdev module manages ANA log page itself now. So NVMe driver
should disable managing ANA log page.
Add a new option disable_read_ana_log_page to struct spdk_nvme_ctrlr_opts.
Then NVMe bdev module enables it when calling spdk_nvme_connect_async().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id5249efe90a4d50763c3a7eaa1eb9572f60fbc8c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8313
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
When ANA change event is notified, increment reference count, read
ANA log page, and parse it to update ANA states of namespaces.
Then remove the spdk_nvme_ns_get_ana_state() call and its stub in
unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I254ae6cb993694bf0d7f4fa4b1039b5f9243b5cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8335
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If ctrlr supports ANA log page, nvme_ctrlr allocates a buffer for ANA
log page and read ANA log page itself, and then each nvme_ns sets its
ANA state by parsing ANA log page.
Most code was brought from NVMe driver because NVMe driver already
supports ANA log page management. However it had a bug that assumed
each descriptor is 8-bytes aligned. Fix the bug together in this
patch. Besides, the implementation in NVMe driver was synchronous.
NVMe bdev module reads ANA log page asynchronously instead.
The next patch will support ANA log page update by AER handler.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib8eab887633b043b394a45702037859414b8e0a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8318
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
bdev_nvme_reset() will be used by JSON RPC and we will have to call
the callback to JSON RPC at bdev_nvme_reset_complete(). To do it
easily, register the current completion function for nvme_bdev_io
in bdev_nvme_reset_complete() into nvme_ctrlr as a generic callback.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie59551dc343215a95bfa5b22f234fc153c9db1b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8589
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvme_ctrlr will be registered as io_device even when multipath is
supported. Hence while spdk_for_each_channel() is executed in reset
processing, we can get nvme_ctrlr both spdk_io_channel_iter_get_ctx()
and spdk_io_channel_iter_get_io_device(). This duplication is not
necessary. Use spdk_io_channel_iter_get_io_device() and pass NULL
to the context parameter of spdk_for_each_channel() for clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifdbd0af4274081c4be7ab0735eb8bf9ae10e3493
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8588
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The current nvme_ctrlr will be registered as io_device even when
multipath is supported. Then we do not have to differentiate completion
processing between reset from bdev_io and internal reset. Hence
inline bdev_nvme_reset_io_complete() into bdev_nvme_reset_complete().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ife2c4c93d423da3953174ac860485a6e095a28bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8587
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When we support multipath, reset_io will hold the controller currently
being reset to reset all underlying controllers sequentially.
bdev_nvme_submit_request() basically passes nvme_bdev_io to each I/O
type, and we have a convenient helper function bdev_nvme_io_complete()
which has nvme_bdev_io as a parametetr.
So revert the previous change to bring nvme_bdev_io as context
for reset processing.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I19697e8252505bab519a42889d1a88d967932f22
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8586
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reset requests from the upper layer will reset the underlying
ctrlrs of a bdev ctrlr but internal reset requests will reset only
the specified ctrlr.
To clarify such difference, rename bdev_nvme_reset() by
bdev_nvme_reset_io() and remove the underscore prefix from
_bdev_nvme_reset() and related functions.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9a2d124f6e2039bfecfdd6599827354d6c373f2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvme_bdev_first_ctrlr() and nvme_bdev_next_ctrlr() were not possible
to hold mutex correctly, and nvme_ctrlr_get() and nvme_ctrlr_get_by_name()
had not held mutex.
nvme_bdev_first_ctrlr() and nvme_bdev_next_ctrlr() were replaced by
nvme_ctrlr_for_each() in the last patch.
In this patch, add mutex to three helper functions, nvme_ctrlr_get(),
nvme_ctrlr_get_by_name(), and nvme_ctrlr_for_each().
Add mutex to nvme_ctrlr_create() but it will be removed in the
following patches because nvme_ctrlr will be added to not global
ctrlr list but ctrlr list per nvme_bdev_ctrlr.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ife27066d2dcac82db0616b0afeaf68e5705d7da1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8722
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Replace two helper functions, nvme_bdev_first_ctrlr() and
nvme_bdev_next_ctrlr() by an new helper function nvme_ctrlr_for_each().
This will make us easier to guard data structure correctly in the
following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibd81286e454fd6127fd150a7d48d8381bd1b89d3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8721
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This object aggregates multiple I/O qpairs for their completion
operations and may be a higher layer object. However, the
aggregation is only to poll completions efficiently. Hence if we
follow the new naming rule, nvme_poll_group is better than
nvme_ctrlr_poll_group and nvme_bdev_poll_group, and rename
nvme_bdev_poll_group by nvme_poll_group.
Besides, many functions in NVMe bdev module have a naming rule,
bdev_nvme + verb + objective
Follow this rule for a few functions related with nvme_poll_group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5e5cb6001d4a862c2121b7265cbbffe0c2109785
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8720
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This object is per I/O path and will be aggregated by an new upper
layer object.
Hence rename nvme_bdev_ctrlr by nvme_ctrlr. Then the following patches
will add nvme_bdev_ctrlr as a different upper layer object.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ieed634447785cc98140b3d49c52a2c753988ece7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8381
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This object is used for failover and per I/O path. A controller may
have multiple of this object. A controller is per path and may be
aggregated by an new object. Hence this object is a lower layer
object.
Based on the new naming rule, rename nvme_bdev_ctrlr_trid by
nvme_ctrlr_trid.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0d5e5812560a6947a0c25af05dea168e8745130e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8380
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
