When the target I/O is controlled by QoS, the abort request is
submitted on the same channel that the target I/O is submitted.
By using this, add a helper function bdev_abort_queued_io(), and
change _bdev_io_submit() to call bdev_abort_queued_io(), and
call _bdev_io_complete_in_submit() with success if bdev_abort_queued_io()
returned true when QoS is enabled on the corresponding channel.
Add necessary unit test together.
Update unit test accordingly, especially, update stub_submit_request()
to abort the matched I/O, update io_during_io_done() because we need to
know not boolean but the exact completion status now, and update
basic_qos() to reset the rate limit to test the abort I/O feature.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I16ca21e7c32cabfdce5d0e5c27a8af8bb00f11c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2230
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add spdk_bdev_abort function as a new public API.
This goes all the way down to the bdev driver module and attempts to
abort all I/Os which has bio_cb_arg as its callback argument.
We can separate when only a single I/O has bio_cb_arg and when multiple
I/Os have bio_cb_arg, but unify both by using parent - children I/O
relationship. To avoid confusion, return matched_ios by _bdev_abort() and
store it into split_outstanding by the caller.
Exclude any I/O submitted after this abort command because the same cb_arg
may be used by all I/Os and abort may never complete.
bdev_io needs to have both bio_cb_arg and bio_to_abort because bio_cb_arg
is used to continue abort processing when it is stopped due to the capacity
of bdev_io pool, and bio_to_abort is used to pass it to the underlying
bdev module at submission. Parent I/O is not submitted directly, and is
only used in the generic bdev layer, and parent I/O's bdev_io uses bio_cb_arg.
Hence add bio_cb_arg to bdev structure and add bio_to_abort to abort structure.
In the meantime of abort operation, target I/Os may be completed. Hence
check if the target I/O still exists at completion, and set the completion
status to false only if it still exists.
Upon completion of this, i.e., this returned zero, the status
SPDK_BDEV_IO_STATUS_SUCCESS indicates all I/Os were successfully aborted,
or the status SPDK_BDEV_IO_STATUS_FAILED indicates any I/O was failed to
abort by any reason.
spdk_bdev_abort() does not support aborting abort or reset request
due to the complexity for now.
Following patches will support I/O split case.
Add unit tests together to cover the basic paths.
Besides, ABI compatibility check required us to bump up SO version of
a few libraries or modules. Bump up SO version of blob bdev module simply
because it does not have any out-of-tree consumer, and suppress bumping
up SO version of lvol library because the affected struct spdk_lvol
is not part of public APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I515da688503557615d491bf0bfb36322ce37df08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is used to make spdk_nvme_connect can support
the old library for compatibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I49d92fb473c3cbabd8e1240785b920480202eee9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1998
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Having that transport can decide about particular ctrlr attributes not
globally but per ctrlr.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ia3fb0d4e576cb9f8ce6df75f775e2fd5727d7f48
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2757
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There were many cases in the past where discover_bdevs()
is the first app to parse given (invalid) config and silently
fail without even printing the exact error. That's because
the spdk app that's started inside that function has &>/dev/null.
discover_bdevs() is currently used only in nvme perf scripts,
so move it there. It should be probably simplified there,
but the priority for now - and the purpose of this patch - is to
remove it from autotest_common.sh so that no one is tempted to use it.
Change-Id: I1d5840dde9272cdaa1ff282022c6ec29a297df50
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1554
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
They had no effect, only the first section was run.
I'm not sure how to run more than one, but it's not
a problem if we stick to just one. There's another case
right below where no `--section` param is specified and
all sections are run.
Change-Id: I399bef07b671ee81bd289e77f2a8203c96268807
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1553
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This function is not really reusable. Inline it to have
a simple, top-to-bottom test flow.
This already shows the test is unnecessarily complicated.
If anything with lib/virtio goes wrong this file is the last
script that will be used for debugging. It would be OK if
there simpler tests for lib/virtio, but there are not.
While here, also add comments for the three major steps
in this test script because it finally looks sane.
Change-Id: Ic8ae611d853d4a685d38aa3112d16e396b0e110d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1552
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
About 1 second speedup. We can use RPC deamon everywhere except for
load_subsystem_config (since it's not a real RPC and it's handled
differently).
Change-Id: If14964c6688976e0f2edec40198c30d5cbc21e83
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1551
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
That common.sh requires e.g. qemu installed, which is
completely unnecessary for this test.
vhost_kill() used to clean up e.g. leftover fio files,
but now instead of deleting them, just tell FIO not to
create them by using --verify_state_save=0 fio param.
Change-Id: I5e63dad5681e715ee5dac131ec9b5c17bfdac2eb
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1550
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Tracing functions introduce performance overhead
so by default keep them only in debug builds.
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Change-Id: I08e0a139c3efa87b0f46b7e7a026b0676f3e8634
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Since rdma-core handles the entire libibverbs suite, and because it
dropped rxe_cfg in favor of iproute2's rdma tool, building librxe is
not needed anymore. That said, the functionality of the rxe_cfg that
our test suites are using is basic and useful enough to be preserved
in a form of a simple Bash script. This can be used to avoid full
overhaul of the code which would need to be adjusted for iproute2's
tooling. In case more complex rdma configuration link-wise is needed,
iproute2 dependency can be added then.
Additionally, some of the nvmf functions have been simplified to make
use of the rxe_cfg port.
The formatting of the status cmd is left compatible with the rxe_cfg.
Change-Id: I594a24b73472a16d51401bcd74fd30c415b24ddb
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If Namespace Change AER is not supported by controller we
need to reset controller after changing namespace configuration.
Change-Id: I640e925fa02881c7b8541f2c0353e78c51074cdc
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1912
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This test creates/deletes namespaces with Namespace Manage commands
and checks if appropriate NVMe CUSE device nodes are created/removed.
Change-Id: Iecbb4949c3843e41d4dbf365b0a57de3362c8947
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1131
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This test changes the range of active namespaces and checks
if apropriate CUSE devices for namespaces was stopped/started
properly on CUSE update.
Change-Id: I9683a0ab6ff28328d4788c49a834cef31c0582cc
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/780
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Always print QEMU's output to the screen - there's not a lot
of it and something may come useful. Let's know what's happening.
The text-based QEMU monitor always runs in an interactive mode,
so post-process its output a bit:
$ monitor_cmd info status
QEMU 5.0.0 monitor - type 'help' for more information
(qemu) info status
VM status: running
(qemu)
Clean it up by removing the first line, then filter out any
lines prefixed with "(qemu) ".
Change-Id: I20b56bbdfc868bc11468dea5ef246cf1db1b4ab8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2143
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Neither Debian or Ubuntu have qemu-img in their package repos. The
actual qemu-img tool comes with qemu-utils instead.
Change-Id: Id7cd538144850f3e2da47e279c9f10d5e7179617
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifdaf1e03e82a3167d994945661d9e5f0fba9224e
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2677
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Fixes introduced by 9307ff5a are applicable to Fedora 31 too, thus
use the very same copy of the patch while compiling vpp on that
version of the system.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I4445497f928a1a509c5adbccfe244ff9eef7275b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2676
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ib894655d69c507c4dbc3aebd72105eb85737e16d
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2675
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This parameter describes the number of admin and IO
qpairs while admin qpair always exists and should not
be configured explicitly.
Introduce a new parameter `max_io_qpairs_per_ctrlr`
which configures the number of IO qpairs.
Internal structure of NVMF transport is not changed,
both RPC parameters configure the same nvmf transport parameter.
Deprecate max_qpairs_per_ctrlr in spdkcli as well
Side change: update dif_insert_or_strip description -
it can be used by TCP and RDMA transports
Config files parsing is not changed since it is deprecated
Fixes#1378
Change-Id: I8403ee6fcf090bb5e86a32e4868fea5924daed23
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
It was broken since long ago. --enable-log-bt doesn't change
anything. log.c expects SPDK_LOG_BACKTRACE_LVL to be defined
for backtrace to work, but it's not defined anywhere.
Apparently nobody needs this, so remove it.
Change-Id: I2313fd24198b0bf718663f2eafee9b5c6efa0a7f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2194
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This test was after the part in the nvme.sh script where
we kill the stub. So the call to get_nvme_bdfs was invariably
returning nothing.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ice98cca8878ccff06057da5f96607eccffc5da39
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2746
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will help us to capture the error case in CI.
Change-Id: I4ff348e492d6acd18ff4552b9a233965db5a1019
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2734
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This only covered one test case for NVMe reservation feature, so remove
it to test directory.
Change-Id: I7920679ce14dd4d6a9164cb7663016bc7a3a4929
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2732
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This type was changed. We can avoid updating the major
version of libspdk_sock though because this type is in
the spdk_internal sock header.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib0d6cc0d99f97a34f618f776ac28e15e0a750356
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2741
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We don't want to rev this more than once in a release cycle. The idea
behind that is that nobody should be making shared objects from a commit
between two releases so we only need to rev once per release cycle.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I8162683152bf86f41061309d341a54959e1c3646
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Move "source $rootdir/test/common/autotest_common.sh" above where
$SPDK_TEST_STORAGE is used, or else $SPDK_TEST_STORAGE is NULL for
its value is assigned in autotest_common.sh.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Ie86af6034847ca2c046b18cd67cd8ad5707697a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2694
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently, Ubuntu 20.04 exposes btrfs-tools under different name,
btrfs-progs. Be nice and fallback to that package name if btrfs-tools
installation fails.
Change-Id: I78d51b081069b252c59b13d2347cdd077938131a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2671
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is detected by some shellcheck versions.
The wiki for this error tells us we should ignore it if we
know what we're doing.
Change-Id: I461dcceace652bc9abd1cfb9f6a2794b98016e96
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2429
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Fixes#1382
System memory gets fragmented over time and repeated hugepage
allocations fail, giving us intermittent failures on CI. Linux
allocates those pages only when requested hugepage count is bigger
than current hugepage count, so in order to prevent any additional
allocations just stick to a single count all the time.
autotest_common.sh already exports HUGEMEM=8G for Linux systems
and 2G for BSD ones. `setup.sh reset` doesn't touch the hugepages,
so practically only the first `setup.sh` will allocate memory now.
The two setup.sh calls are run with sudo, so they need
HUGEMEM="$HUGEMEM" to work.
Change-Id: I48b4a720bad4e1da14e78313b4db0eb60a177c38
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2374
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
It was targeted only for Fedora 26 and this particular version reached
its EOL two years ago. Additionally, new version of the iscsiadm tool
was relased since (as part of the iscsi-initiator-utils package).
Change-Id: I14136e98b378f0b44a4a43c5ae7a129cf8f7c306
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2701
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
This is an important aspect of ABI versioning.
There was a change to the spdk_bdev_opts struct
which is accessible from the public API that results
in an ABI change.
There was also a change in the spdk_accel_module_if struct that
will affect new modules so its major version needs to be revved.
There was also a change in the publically accessible rmda_hooks
structure which forced an ABI change in the NVMe library.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I5cc6886fe01b4adc2836b6e15995471f0361dc29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2663
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
I missed a few files in this library the first time.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I2ad55355e6348eaa10384a148dd45deb9f68fc2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Remove inclusion of spdk/event.h and spdk_internal/event.h from
SPDK nvmf library. Their dependency had been removed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibc6c52ab41555d9b29afc3e16c1c3fd0bf5fc63a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI library still needs to include SPDK event library only for
shared memory ID to allocate shared memory for iSCSI top application.
We will move the code to module library separately later but remove
all other inclusion of SPDK event library in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I21d77b9cc00c6a1f512546a6a0202c8fa5623bed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2686
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The UT can test the received aer reqs number and
check if the reqs are continuous.
Change-Id: Ifa1cb9dd4cdae5526fc80fe6c1b504ad9873d0f8
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2549
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add the AER events in nvmf target from one to four.
Change-Id: Ie31988b49d68bdbc28ab2e09c783e681d3017e2b
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2548
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
current_queue_depth should have been incremented only if I/O submission
succeeded.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib26b42b0ab195eba7536b2403a31d42305d77433
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2585
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This helps ensure thread safety on creation of the
netlink socket, when probe is called from multiple
threads at once. It is also a lot more clean - we just
create it once, rather than checking every time probe
is called to see if it has to be created.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I528cedc3ff44de6ea8ecaf6d2389226502ba408e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2681
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This reverts commit 79215d80c1.
Reason: Find the bugs while using batched. For example, if
we fetch 3 CQEs, A, B, C and put it in a cqes[] array.
Then we leverage io uring cqe seen to handle, Then we handle the
CQE A, then invokes the call back related with A. In A's call back,
it may also call the reap function (sock_uring_group_reap),
then the CQEs will be handled again. Thus the CQEs B and C can be already
handled. Then we will handle B or C again, then it triggers the error.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I67ece3b24e677b88d66d08722b00539693b42e1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2543
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Do not skip if db_bench is not available.
Explicitly fail.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I96b0fde50aedf20654a114a2c28d24bfed478b11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2515
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add simple periodic round robin poll group migration to the example
application to exercise SPDK thread dynamic scheduling.
Add CLI option to enable the feature manually. Default setting is
disabled, and the period is specified as micro second.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4639e94ce00611a600ff068e754ee6f31905565c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2556
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When testing fuse with blobfs, we used "bs=4k count=32" as the test case,
but when it comes to bdev layer, the IO size is 64KiB, and alignment is 4KiB,
so bdev_io_get_buf() will return error as the following message:
bdev.c: 789:bdev_io_get_buf: *ERROR*: Length + alignment 69632 is larger than allowed
so here we can resize the AIO alignment size from 4096 to 512, because the bdev memory
pool default alignment size is 512, with this change the error will not occur in
bdev layer.
For the umount operation, since the fuse module will use send message to do the umount,
here we can insert one second barrier to wait for the umount to be completed before
killing the process.
Fix issue #1406.
Change-Id: Id3c67900c87a5797718c28c184a925275f90c7d4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2587
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
I found this flag weird while debugging a lvol with
thin provisioned Blob, so make it consistent with it's Blob.
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: Iae555020d5781dfcf4d4f072a47e9573d35b8705
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2435
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently used fork of nvme-cli (nvme-cli v1.8 with our patch)
doesn't work well with namespace manage feature (e.g. namespace
deletion or working with NSID=0xffffffff). These problems seems
to be fixed in later versions of nvme-cli (v1.11.1 for now).
Nvme-cli tool must be patched to support namespace devices
exposed as character devices. Required modification is
already merged with current nvme-cli master in
commit: e770466615096a6d41f038a28819b00bc3078e1d
and hopefully will be available in the next release of nvme-cli
(>1.11.1).
Next steps would be:
1) Change the commit hash to a release that includes mentioned
patch.
2) Drop the compilation when system repos contain the right
release.
Change-Id: I07846cba955e580f5a8861ad4c7e50e7f4adccfb
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2417
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
remove only the spdk_ prefix from static functions in
the above libraries.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I59ce032c3312fa73f30c133fd62e603c1eee2859
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2365
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was overlooked when the module was merged.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ia7bd8710741bf5a82e7dd27925ecef1e59ed2938
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2360
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Instead of blindly dumping tmp files at random places, try to
determine the best place for given file based on the available
storage.
Change-Id: I92a7adf6cd17222510fa76969856a50f74966c0f
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1868
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch updates the suggested branch to 5.0.0,
which at this time contain all necessary patches to run
FTL tests.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idddea7154565f710a8325ec73de98cfe52e6ab8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
In persistent-metadata test,
add a sleep because of issue #1348
Change-Id: If9ecaf660ac7ed18614d87cc775e60371ca84a97
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1327
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
This reverts commit 6d6052ac96.
This approach is no longer necessary given the patch immediately
preceeding this one.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I5aab14346fa5a14dbf33c94ffcf88b045cdb4999
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2512
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new RDMA provider can be enabled by passing
--with-rdma=mlx5_dv parameter to configure script
This provider uses "externally created qpair"
functionality of rdma cm - it must move a qpair
to RTS state manually
Change-Id: I72484f6edd1f4dad15430e2c8d36b65d1975e8a2
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1658
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is a wrapper over RDMA CM rdma_disconnect function
The wrapper is needed since in Mellanox Direct Verbs
(aka DV) we must move qpair to error state manually
before calling rdma_disconnect
Change-Id: Ia8623c6989e7679591f2da56bafa7f4262eeebf9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1975
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
This patch adds use of RDMA provider API to NVMEoF initiator.
Makefiles have been updated with new RDMA lib dependency
Change-Id: Ieaefeb12ee9681d3db2b618c5cf0c54dc52230af
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1657
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch updates NVMF target to use RDMA provider API
to create and destroy qpairs.
Makefiles have been updated with new dependency on RDMA lib
Change-Id: Iae35aea601380f8d1a6453a7fd6115f781e126f5
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since gcc 9.* can be used across different distribution, the old check
no longer applies. Instead of looking for ArchLinux, check the gcc's
version directly to make sure proper options are added regardless of
the distribution (.e.g. Fedora{30,31} is also shipped with gcc 9.* at
the moment).
Change-Id: Ic493f411e8d886cae9bd5e2f389cb632d7b9f98a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2432
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Allowing for custom crc32 polynomials isn't really within the scope
of SPDK. SPDK libraries have shifted over to using more optimized
versions of these functions wherever possible (e.g. ISA-L).
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ie4837010874e957481dd00896389b38c842445e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2424
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In current implementation, lib/vhost assumes that it always runs
together with lib/event, and would call lib/event's functions in
vhost.c. This is not necessary and make program unable to
create/destroy vhost module without init/fini the whole spdk env. It
would cause problems when program runs with vhost and other spdk
components together.
In this patch, we remove the dependency of lib/vhost on lib/event by
adding a global vairable g_vhost_core_mask so that it could handle
core mask by itself.
Signed-off-by: Kyle Zhang <kyle@smartx.com>
Change-Id: I38ceb92ac39b6980955346fda41e968aaead863d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1204
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
