Use spdk_bdev_flush_blocks() in place of spdk_bdev_flush(), since the
SCSI SYNCHRONIZE CACHE command already natively operates in blocks
rather than bytes.
Change-Id: I11810948fb8d0b6b911d48620e2a363f767cc7f7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
If faced no memory status, we should set it to nomem,
thus, we can make this I/O resubmit it again.
Change-Id: Icb9a7eeab3278021fa95a5e33c7ff55b3cc62558
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/393122
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SPDK reactor is one per cpu and SPDK_MAX_REACTORS is used as the
maximum number of cpus locally in the file.
When the maximum number of cpus is changed, SPDK_MAX_REACTORS is likely
to fail to be changed.
Adopting two improvements for iSCSI by Ziye to the reactor will be safer
than now for the reactor.
- iscsi/conn: remove rte_config.h header
- env: export spdk_env_get_last_core function
Change-Id: I4941454ffdb704fa7799549e1f190c9bae3a4421
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392911
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adopt two improvements for iSCSI by Ziye to VHOST.
- iscsi/conn: remove rte_config.h header
- env: export spdk_env_get_last_core function
Change-Id: I8f067093d593c8d483c52587669f8b0b706f497f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392910
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The latest patch for the iSCSI connection is applied to the vhost
too.
RTE_MAX_LCORE in the for loop is removed and the for loop is
replaced by SPDK_ENV_FOREACH_CORE().
When the cpumask is unexpectedly 0, not 0 but the first core is
returned.
Change-Id: I39cfc2219a3532eccc8c0ce59712102b947a76d7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392588
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Previously we used to manually set
vdev->max_queues and called virtio_dev_restart
to go through all virtio init states, negotiate
features and allocate virtqueues. This is,
however, insufficient for Virtio-Blk, where we
e.g. need to check against negotiated multiqueue
flag before deciding how many queues we can use
(reading num_queues field from device config is
forbidden unless VIRTIO_BLK_F_MQ is negotiated).
This patch refactors queue-num related code
and also removes various restrictions. If device
supports less queues than requested, a warning
will be printed during initialization, but
the device will now continue to init normally.
The queue-num negotiation for virtio-user should
be eventually moved to upper layers, but that is
not necessary for now.
Change-Id: I418b56fa62c17b547243422ea077f0d76555bd13
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393087
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the host fails to send some events,
the next event it succeeds to send
might have an EVENTS_MISSED flag set.
Once virtio receives such event, it will
schedule a full bus rescan to manually
detect any changes.
Change-Id: Ifa66536f8e2980ad31ee68769f042f08100da54e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392780
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Don't allow starting full device rescan
if such scan is already in progress.
This patch also makes it possible to
start a full scan while only particular
targets are being rescanned.
Change-Id: I8677f640a4e5d9d8c486dfe1e9a58331e941a461
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392373
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Implemented eventq rescan message.
When the host hot-attaches a target
to the controller, it will now
automatically appear as a virtio bdev.
Change-Id: Ie81352b70808a0e078009f618cc1fcfed407d1ba
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392374
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A public API to remove a virtio
controller is about to be published
soon. Hence, we need to cover all
possible corner-cases where calling
it could cause a segfault.
Change-Id: I804cc0bee4a60ab8fc159bb98b7712cc258117f3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392271
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The upcoming rescan implementation will
do scan I/O on existing I/O virtqueues.
To handle scan cleanly, we need to queue
scan I/O if virtqueues are full.
The heuristics for resending I/O should
be sufficient for all real case scenarios.
A scan I/O consists of either 2 or 3 iovs.
A raw I/O consists of at least 2
descriptors. Since most I/O requests
contain some additional payload, in 99%
of cases the scan I/O will be successfully
resent after polling a single I/O response.
To handle the remaining 1%, we try to
resend a scan I/O up to SCAN_REQUEST_RETRIES
(currently = 5) times.
Change-Id: I8c84ed1d109d9f403c9d7b8efabb904eb26183db
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392174
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SCSI doesn't specify any payload associated
with TEST_UNIT_READY and START_STOP_UNIT
commands. Sending a payload didn't cause
any troubles so far, but still it's not SCSI
compliant and hence has been removed.
It is now assumed that iov_len of 0 means
that no payload should be sent.
Change-Id: Ibdfa7cd77af6049132278911d872cd52c10be6c7
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391868
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
scan_finish function will now unconditionally
finish the scan, while scan_next will continue
scanning on the next target.
Now that target scan be aborted from external
sources (device removal during re-scan). There
is simply a need for such scan_finish function.
Change-Id: I49e0dd6ea7abdddc24c23af362313d657fe1dc66
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391866
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We used to defer registering bdevs when
a target scan was in progress, as bdev examine
(gpt) would do an I/O that could be polled by
the scan poller and parsed as a scan I/O response.
This limitation has been removed a long time
ago. Scan I/O can go alongside default I/O and
bdevs can now be registered at runtime.
Change-Id: I949c57acbfe23a7246de90e90ce58ea007be947e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391865
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Eventq is a special virtqueue. The driver
(e.g. SPDK virtio) enqueues some fixed
amount of write-only requests. The host
device completes them only when it has
something to tell us - like a device
hotremove. After we receive the response,
containing full event details, we schedule
proper action and re-enqueue the event to
be used later by the host as another event.
Change-Id: I0516b161d8d4a49490b909fa2a454c9c9fa517f2
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390115
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Previous descriptor chain was being corrupted
by setting invalid vq->req_end (virtio.c:538).
Change-Id: I4b27db02dc990e6af011a1b614e30e3050379e9f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392774
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove unused macro constants of iSCSI.
MAX_PORTAL, MAX_INITIATOR, MAX_NETMASK are still used to determine
buffer size for JSON-RPC and iSCSI.conf and are not removed in
this patch yet.
Change-Id: I3036dc472eca09eff7fa3f6ea7e8e28b0978358f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392912
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A few previous changes replaced ALL by ANY for the initiator group
because ANY was normal for this case. ANY was tested enough for
the initiator name of the initiator group but not tested for
the netmask of the initiator group.
Hence the previous changes caused degradation.
This is the bug fix and UT code is added together.
Change-Id: Idf7642dd4c111a4788aca31a0105b3497631aecd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392923
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Exported lib/bdev/rte_virtio as a separate
library not dependent on bdev.
Virtio is now accessible via spdk_internal/virtio.h.
The header is marked `internal`, as it's
not meant to be used by end users. It's
not handy to handle all backend-specific
(e.g. Virtio-SCSI) logic in a user code.
For now the Virtio interface is publicly
exposed only via bdev_virtio module. We
might want to consider adding a separate,
public Virtio-SCSI library in the future.
Note: this patch doesn't do any changes
to the virtio code. Everything is
moved 1:1.
Change-Id: I805e5d12d265d82b0bc5784c89fbadb81abdb278
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388166
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At present, close(dev_fd) is always executed before the
return of ioctl(nbd->dev_fd, NBD_DO_IT). So when executing
these 2 ioctl commands, dev_fd is already closed.
Change-Id: I6fce73c440972af91f662f24c1fbca51a7b95d61
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391708
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Some functions should be static.
2 For the unused API, we delete them first. When it is used, we should add
them back.
Change-Id: I2c39e8bef96155fc71801c76534955d9cf6cb0bd
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/392721
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
No need to export this function, since it is only
used in lib/iscsi.c
Change-Id: Ib5fc3d54e45d0b5696413788a6a98278e9c2dfef
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/392716
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reason: It only handles the queue datain tasks. After the changing,
it would be more accurate for the code reading.
Change-Id: I87999f811810cadd4b58d99be1cdeba0a1a7503f
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/392719
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Also use this function in iscsi/conn.c
Change-Id: I25f6da175eddb12c4ac2624d695c2c43c871d8e8
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/392713
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We can now proudly say that rte_virtio
doesn't contain SCSI references anymore.
Change-Id: Id814de255d8715af03c68a237923432f1e4fe2e1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/392628
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This mimics the per-lcore cache that the DPDK rte_mempool
implements. But DPDK rte_mempool relies on the DPDK
lcore_ids which are not set for non-DPDK threads (such as
the fio bdev plugin).
So implement our own per-thread bdev_io cache instead.
This is quite simple since we already have a per-thread
bdev channel called spdk_bdev_mgmt_channel.
Previously, we passed 64 to spdk_mempool for the
per-core cache size. This patch effectively changes it
to 256 and moves it from the spdk_mempool (which we now
specify with a per-core cache size of 0) to this internal
bdev cache. We allocate 64K of these bdev_io, so putting
a few more in each thread's cache will not hurt anything.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5e715f8c69b99130c7b80347b47a881595d184ae
Reviewed-on: https://review.gerrithub.io/392531
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The latest change for the portal group is applied to the vhost.
The following comment is quoted from it.
Currently the cpumask must be a subset of the reactor mask.
However, this is different from sched_setaffinity() function
and taskset command of FreeBSD and Linux. The latter will
be familier for more people. Hence the later is adopted.
The following is quoted from the FreeBSD Man Page of taskset:
The CPU affinity is represented as a bitmask, with the lowest
order bit corresponding to the first logical CPU and the
highest order bit corresponding to the last logical CPU.
Not all CPUs may exist on a given system but a mask may specify
more CPUs than are present.
A retrieved mask will reflect only the bits that correspond to
CPUs physically on the system.
If an invalid mask is given (i.e., one that corresponds to no
valid CPUs on the current system) an error is returned.
The masks are typically given in hexadecimal.
Change-Id: Idcd72a12ef52e4ccec8476e7d54fab82867cf936
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392587
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
During hot remove of lvol store some lvols can already be in a process
of removal. We should not start another removal process for lvol that
is already being removed.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ifc91e4cee11ee63af04eac3729d014d7c04ff98b
Reviewed-on: https://review.gerrithub.io/390217
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Instead of requiring each bdev module to track its own bdevs and clean
them up during its fini callback, we can walk the list of registered bdevs
during spdk_bdev_finish() and call spdk_bdev_unregister() on each one of
them before cleaning up the bdev modules.
Change-Id: I01816707c9100f66f542bfd73b90bcb0e0fb0c0c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389878
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Commit ID "269910c0" removed the support of separate metadata,
for those controllers which can support this feature, SPDK driver
can't be used. SPDK provides APIs such as:
spdk_nvme_ctrlr_cmd_io_raw_with_md/spdk_nvme_ns_cmd_write_with_md/
spdk_nvme_ns_cmd_read_with_md, which can support separate metadata.
While here, re-enable this feature with this commit.
Change-Id: If77c21e9ac700c4b334548ebfa7e8e6286285a64
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/392440
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This can be used for two purposes:
1) more quickly iterate the blob list, avoiding
metadata pages that are valid but not the first
page in the blob's metadata list
2) close races between delete and open operations -
now we can clear the bit in the blobid bit array
when the delete operation is in progress, ensuring
no one else can try to open the blob
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3904648fd6fa656cb98c9e17ea763ed5a84ef537
Reviewed-on: https://review.gerrithub.io/391695
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
No need to export these functions since they are not
used by other files.
Change-Id: Iab5d44667cc0d57ec105e90a71d434cc4e07f4f5
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/392590
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For g_num_connections, we should create an proper
array size, we cannot directly create it by the size:
spdk_env_get_core_count(). The reason is that the
core mask can be non-continuous,e.g., 0x1001, thus
for effient access, we create a large array size with
last_core +1, although we will have some space waste,
but this will not be big, but still maintain the fast
array index acccess.
Change-Id: I95e1fc34e0816ac2f8764880c0d0e629f43a5dc4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/391909
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iedfa8d3de8520836e184f7ef0925822fb705fc67
Reviewed-on: https://review.gerrithub.io/391672
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Call this function from spdk_bdev_mgmt_channel_destroy().
Currently there are no real resources to free, but that
will change in an upcoming patch which adds per-thread
bdev_io caches.
While here, also add a for_each_channel iterator to
call this function on each existing channel during bdev
finish code path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9348e37053505c9fba7a6421e55ffc416668d24f
Reviewed-on: https://review.gerrithub.io/392530
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prepares for some upcoming changes which will
add a per-thread bdev_io cache.
While here, remove spdk_bdev_get_io() from the
internal bdev API. This function is not meant
to be called outside of bdev.c.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9f764a88a079fac936931c46d615999454013732
Reviewed-on: https://review.gerrithub.io/392529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
To better match bdev modules like nvme, complete requests
for the bdev/null driver asynchronously. This will be
done by allocating IO channels that register a poller
and keep a TAILQ of bdev IO to be completed next time
the poller runs.
This is actually more efficient as well, since completing
I/O in submit_request context defers the completion using
an event. A benchmark of bdevperf with split running on
top of null module shows this patch increases throughput
20%.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8c664234660c249fd8ec8d9244eed33502d4103e
Reviewed-on: https://review.gerrithub.io/392528
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I366b941a60d1fb00951591e7f631a65e8a449904
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/392566
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I102954505c2c53458aae30f6d15b46e008355501
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/392565
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Currently the cpumask must be a subset of the reactor mask.
However, this is different from sched_setaffinity() function
and taskset command of FreeBSD and Linux. The latter will
be familier for more people. Hence the later is adopted.
The following is quoted from the FreeBSD Man Page of taskset:
The CPU affinity is represented as a bitmask, with the lowest
order bit corresponding to the first logical CPU and the
highest order bit corresponding to the last logical CPU.
Not all CPUs may exist on a given system but a mask may specify
more CPUs than are present.
A retrieved mask will reflect only the bits that correspond to
CPUs physically on the system.
If an invalid mask is given (i.e., one that corresponds to no
valid CPUs on the current system) an error is returned.
The masks are typically given in hexadecimal.
Change-Id: I7e0d2e029569bfc986f7fcdf78048791ab389f72
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/392446
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Load balancing for idle iSCSI connections uses the RTE EAL Launch
state and uses DPDK RTE EAL API.
But all SPDK reactors will exit simultaneously because each SPDK
reactor checks if the global state is RUNNING to exit.
Hence calling rte_eal_get_lcore_state() is not necessary.
When the reactor hot-plug function is supported, this implementation
will be reconsidered together.
Change-Id: I34eaf3e42b5b7deae6473d2bfaf0910aaa9da6de
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391339
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently idle iSCSI connections are managed by the master lcore,
but the master lcore is like BSP of OS and for initialization.
To manage idle iSCSI connections it is important that the core is
consistent.
Hence the first core is better than the master lcore.
In this patch the following are changed together:
- Errors of kqueue() and epoll_create1() are not related with master
lcore. "master lcore" is removed and errno is added into the log.
- In spdk_iscsi_conn_allocate_reactor(), when cpumask is 0, 0 is
selected as core number. 0 is not safe and first_core is used instead.
In spdk_iscsi_conn_allocate_reactor(), when first_core is used instead
of master_lcore, we may observe some contradiction in the following
code. But few changes are done in this patch.
In the current implementation we can assume the first lcore is
equal to the master lcore and the following code will be removed
in the subsequent patch.
/*
* DPDK returns WAIT for the master lcore instead of RUNNING.
* So we always treat the reactor on master core as RUNNING.
*/
if (i == master_lcore) {
state = RUNNING;
} else {
state = rte_eal_get_lcore_state(i);
}
Change-Id: I6cac06c27b289db5ea1f9452e33489286c64d2fa
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391338
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Before removing the DPDK dependency from the iSCSI connection
load balancing, this should be done.
In spdk_iscsi_conn_allocate_reactor(cpumask)
- if any lcore[i]'s state is FINISHED, the caller calls
rte_eal_wait_lcore(i). But the purpose of rte_eal_wait_lcore()
is to check if the slave is in a WAIT state before calling
rte_eal_remote_launch(). The meaning of this usage is not clear.
- If the state of lcore[i] is WAIT or FINISHED, the reactor does
not run on the lcore[i]. iSCSI connections consist of not reactor
but poller. Hence selecting lcore[i] with the state WAIT or
FINISHED does not look correct.
Change-Id: If8c420f2d16dc44e77f8963f5732faa52e3d829b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391332
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Change-Id: I7174f1799361b8337ff5590b90ad6a0564ca8e9b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391899
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
User can specify processor affinity for each iSCSI connection
by specifying cpumask in the configuration file.
However the example of iscsi.conf.in does not have any description
about this. Hence it is very difficult for user to use this.
The portal group section of the config dump file has the same
description. Hence it is also changed.
Change-Id: I6e7b3bb67e10e78f4a47165525f023555080f146
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391510
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There existing an overflow for the large value of sleeping time
for the poller and the actual time may be incorrect setting due
to this overflow. Update the calculation here.
Change-Id: I14fe21d3f0e1abaa9d13d3d6254aff254d2dfcc3
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/392127
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8519a4b68db44cb8fe6dd251a52bf0f1dca73c32
Reviewed-on: https://review.gerrithub.io/391890
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently the default setting of cpumask of network portal is
different between iSCSI.conf and JSON-RPC.
When a network portal is created by iSCSI.conf, its cpumask is
set to all available CPUs by default. However when it is created
by JSON-RPC, its cpumask is set to 0 by default.
Auto test 'test/iscsi_tgt/idle_migration creates a network portal
by JSON-RPC. Hence the auto test cannot test the load balancing
function of iSCSI target.
Change-Id: I2685172cb9259b643f6d18d4660a8425dcef3f5d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391898
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For normal exit logic, such as Ctrl+C, vhost blk will not
shutdown the backend device, e.g: NVMe controller.
Change-Id: I7fdf8687a2cfa6a8cc6a61428d722debfa9a2180
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391348
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that we have SCSI-specific virtio
device struct, we can keep our virtqueue
pollers in there.
Change-Id: If4b643f8c46e42d5d403532ad015c721c0429282
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390114
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The virtio_req struct has been removed.
The new lower-level API has been used
instead. This puts more responsibility on
the upper abstraction layers, but gives
much more descriptor layout flexibility.
It is required for e.g. upcoming
Virtio-SCSI eventq implementation
Change-Id: I9a310c0ba4451bf3a076bef4e90bb75c0046c70a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391028
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
In the iSCSI specification, the SCSI device name is defined to be
the iSCSI name of the node.
However, when g_spdk_iscsi.nodebase is used, the SCSI device name
is made of the device specific string (the part of IQN after the
colon).
The size of the temporary buffer fullname[MAX_TMPBUF] in
spdk_iscsi_tgt_node_construct() is 1024 and the size of
spdk_scsi_dev.name is 255. The former is larger than the later.
However the max length of IQN, EUI, NAA are 223, 20, and 36,
respectively. All are less than 255.
Hence even if we use fullname as the SCSI device name, no overflow
will occur. Even if fullname is more than 255, strncpy() does not
write more than 255 in spdk_scsi_dev_construct().
It's possible to check the length of iSCSI name strictly, but I
will do the least in this patch.
Change-Id: Icc6655fcd846797720867c10e316d2951c664030
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/390360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch set the controller as removed in pcie level when the register
return specific value (0xffffffff), we also return the real value to the
upper level (nvme bdev), which will help the upper level do the work of
hotplug.
Change-Id: Ifad45c760cccbce522506ffbf86495318a6b393b
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/391327
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prepares for a future change where we need to use the
recovery path when loading pre-v3 on-disk formats, since the
older disk formats do not save a blobid mask.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia94d56450202f81373c3de94237eca2dfd96526c
Reviewed-on: https://review.gerrithub.io/391694
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This eliminates a bunch of code duplication. This also
fixes a couple of places where the ctx->bs was not being
freed in the load fail path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie6b0a4a653b5c80edf14086801b75457852a4736
Reviewed-on: https://review.gerrithub.io/391693
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
there are still several printf statements in app.c but those occur
before the call to spdk_log_open
Change-Id: If017c4d658ca45f34b97500bb1a3db5ab1f0675e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/391888
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iba33c55f129c60fad2d58f5254dec5c54ed56805
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Reviewed-on: https://review.gerrithub.io/388217
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All SPDK libraries should use the spdk/log.h family of functions
for logging.
Change-Id: I2b8ac30f2901b325784552f0016f1058ae2cd577
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391687
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I964b7a37fcb641a610d518a02841b25913c5be2e
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391733
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
If occasionally there is unflushed data in kernel,
nbd disconnect ioctl will not return, until these
data are flushed. spdk_nbd_disk should process these
data in flushing.
But at present, spdk_nbd_disk is running on a some
reactor with rpc. It is a hidden danger of deadlock.
Change-Id: I2850105dff78f09f0e1b3c0a570dbbf7efdb469e
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The outstanding r/w requests counter is not decremented
back if IB r/w request fails.
As the result, the rdma qpair stops pumping the requests
after the number of ibv_post_send failures reaches
the threshold for outstanding r/w requests for that qpair.
The patch decrements qpair's r/w counter back in case of
ibv_post_send returns an error.
Change-Id: I8fa0f2905974a50037034962e4d2a001290a06a9
Signed-off-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Reviewed-on: https://review.gerrithub.io/391799
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This greatly increases the efficiency when the target is scaled
to many connections. Now all connections being handled by a given
thread can be polled in O(1), whereas before it was O(n) where
n was the number of connections.
Change-Id: I9f695f68093d73e6538df416b0f1aabef07119ff
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/391491
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All SPDK libraries should use the spdk/log.h family of functions
for logging.
Change-Id: I4b9f172102c6d7998d3a634573493db3fe25ff76
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391686
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
All SPDK libraries should use the spdk/log.h family of functions
for logging.
The cause of strdup failure is only out-of-memory for malloc().
Hence errno is omitted.
Change-Id: I682f11fbb6f12c9de8d57a025b704b4f050f7474
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391685
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The struct is about to be removed.
This is a preliminary patch towards
the removal.
Change-Id: I5a479678790b8758634bdb0bb2e6facfde514aa1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391945
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The old API is simply not sufficient.
We assumed that each request contains
a single request and a single response
descriptor. However that's not the case
for e.g. virtio scsi eventq, where each
event contains only a response.
This patch only introduces the new API,
keeping the old one intact. The old API
will be removed in subsequent patches.
Change-Id: I89e53d602165aa0c7ceb25d98237f87550f4eae7
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390854
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All SPDK libraries should use the spdk/log.h family of functions
for logging.
Change-Id: I088f62e6035aa1885ad0973a033ecee2f325ed30
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391684
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All SPDK libraries should use the spdk/log.h family of functions
for logging.
Change-Id: I4c12388433f8c57291cea9f30566438a9d78e3d1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391683
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This ensures we do not end up with a racing close v.
delete. If we decrement the ref up front, we could
start the close process (which may include persisting
metadata) and then also allow a delete operation to
start. It is safer to wait until the close operation
is done before decrementing the ref count, because then
it will eliminate this race condition (the delete op
would immediately fail).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad7fd8320d2c9b56f3c4fce054bcb6271e19ad38
Reviewed-on: https://review.gerrithub.io/391493
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This ensures all blob-loading functionality goes through
the single spdk_bs_open_blob function which will simplify
some upcoming changes around managing global metadata
state from multiple threads.
This will also help prevent races where a delete operation
has started followed by an open on the blob that is
being deleted. Those specific changes will be in an
upcoming patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I17e995145ab23068b816b44c33483b0708f5f563
Reviewed-on: https://review.gerrithub.io/391486
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Found during unit testing for blobid_mask coming in a future
patch - the unit test will be added as part of that future
patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iecdde6ba16c5af9caf59214f328ddc22aae71e94
Reviewed-on: https://review.gerrithub.io/391692
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Similar to previous change, the ** paradigm is a bit
problematic for asynchronous routines that could fail.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife7748280482356c4c51a796817b71cd7bc7e479
Reviewed-on: https://review.gerrithub.io/391483
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Using the ** paradigm is a bit problematic for asynchronous
routines that could fail. Currently we were inconsistent in
that some error paths would zero the pointer while others
did not. So make this just a plain pointer, which simplifies
the API and its implementation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67147931c6e8350896a4505022a6a314655de3d3
Reviewed-on: https://review.gerrithub.io/391482
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We do not need to separately call _spdk_blob_lookup() in
_spdk_bs_iter_cpl() - spdk_bs_open_blob() does this
already. This minimizes the number of entry points to
_spdk_blob_lookup() which will be important with some
upcoming changes around multiple threads performing
metadata operations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I032cd55c862267298cbe1674dd13d7a83eef7c0f
Reviewed-on: https://review.gerrithub.io/391474
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add pointer of subsystem in namespace data structure, then we can remove
the spdk_nvmf_subsystem_add_ns_ctx.
Change-Id: I2d024f10d35fdac64fc34d0cb6523cfca74a8164
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/391697
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I85d33f5223ebb30fcf0135596537142e48f2879f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391539
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
While iterating, allow the user to perform asynchronous
operations. To continue iteration, the user is expected
to call spdk_for_each_channel_continue.
Change-Id: Ifd7d03d5fbf17cf13843704274b036d49ca0484a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/391309
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
When header files include other header files, it can be difficult
to read the chain of relationships. Hence remove obvious nested
header inclusion.
Remove obvious unreferenced header inclusion too.
Change-Id: I13b1c4e107da8c1a93fae4a0e3c3ee273887aab0
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391363
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SPDK does not provide casual way to get iSCSI global parameters
set by iSCSI.conf. Hence test/iscsi_tgt have to use hard-coded
value for iSCSI target's nodebase.
NVMeOF provide similar JSON-RPC dump_nvmf_subsystem().
Change-Id: I1a53572f707e83cfd18369475b2565c6390a4d2d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391323
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
get_vhost_controllers was printing only one device of vhost
scsi controller with multiple devices
Change-Id: I392fc393d9e8f3d20c28139724d83b79d800456a
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/391593
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also used it in parsing `-m` SPDK app param,
meaning that it can now accept numbers
followed by a binary prefix - like 512M or 2G.
Change-Id: If458dc08429237f2cb3f3f661bcaf382468df0f0
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391670
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove the metadata channel, and instead use the same
channel for metadata and data operations on the metadata
thread.
This prepares for future changes which will allow
for metadata operations on any thread - not just the
thread where spdk_bs_load() or spdk_bs_init() was
called.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6b11a58fcb237a9a7603841d118b3729d83c6c98
Reviewed-on: https://review.gerrithub.io/391311
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
As part of clarifying the API and preparing for some
future changes, rename the following functions:
spdk_bs_md_create_blob => spdk_bs_create_blob
spdk_bs_md_open_blob => spdk_bs_open_blob
spdk_bs_md_delete_blob => spdk_bs_delete_blob
spdk_bs_md_iter_first => spdk_bs_iter_first
spdk_bs_md_iter_next => spdk_bs_iter_next
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I86bf792717b68379484a6108396bb891fe1c221e
Reviewed-on: https://review.gerrithub.io/391031
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This function was a nop and is not needed.
lvol was calling this function when an lvol bdev
gets a FLUSH I/O, but that is not needed either. So
lvol will now report it does not support flush.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I92df83243f7ebce81c69040a8874891dc2ffc961
Reviewed-on: https://review.gerrithub.io/391023
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The implementations in blobstore.c still remain for now, but
those will be removed after some upcoming changes which will
eliminate a global md thread and instead allow caller to
specify an I/O channel for each blobstore level API call.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idf800a7f061ffc9c42488951262e28e660871356
Reviewed-on: https://review.gerrithub.io/391020
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace the single call to spdk_scsi_dev_print() with a reimplementation
using public SCSI API functions, and also using the SPDK logging
framework instead of printf().
Change-Id: Ifa455f9e6a4a07a35d5dec311a61e9a8afaa0227
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391320
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We used to sprintf the path from
directory and socket name, while
the complete path was already held
in vdev->path.
Change-Id: I27bc71be52a805b39e083eb4f76947587c36a4ad
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390411
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Remove the DPDK dependency from the trace library.
Change-Id: Id03387042b036142a9b3a0a81276d6ddf5295802
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391315
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add functions to iterate the list of subsystems for a given
target.
Change-Id: Id3831f656033092224168b353788ae87238bf800
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388294
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now rely entirely on the user to create and poll
the poll groups.
Change-Id: I66baaa2d0f493390a055a32e6c902f5e2f574534
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/385954
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This bug is detected by test/iscsi_tgt/rpc_config
Due to the PG-IG map tree, IG-map is added to PG-map.
When PG was deleted first, PG-map was not deleted but PG was
deleted because PG-map has IG-maps.
PG-IG map tree was designed such that when PG was deleted first,
delete all IG-maps belonging to the PG-map, the PG-map, and then
PG.
By this change stale pointer which will cause memory leak is
removed.
Change-Id: I15c2ef48bad34608e53d0b44459c90a0cffda24d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391321
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most importantly, the controlq and io_device
are now created at the time of creating the
device, not after the scan has finished. This
allows us to possibly scan the same device
multiple times.
Change-Id: Ic1de27f917204559be5c761315a3ebfe159b1c22
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390112
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Rather than acquiring an exclusive virtqueue
for the target scan, (re)use an existing one
from io_channel on the scanning thread.
The goal is to be able to rescan the virtio
device in runtime (hot-attach/detach).
Now that scan can be done on existing queues,
it is no longer guaranteed that rings have
enough space to enqueue all requests. This
will be fixed in subsequent patches.
Change-Id: I0a39460c0ddb52592ae6828e5a7f51056ada2696
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390111
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The virtio device can now be
removed with a single call.
Change-Id: I221d2c0578eeddb3de9c2a31eefc0f64fda38939
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390110
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Purpose: To remove the dpdk dependency for iSCSI.
Change-Id: I01ef910496d2029ba755dd6d0c06d61c248b8dfe
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/390938
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reduce the log level of the disconnection message to INFO (this is a
normal occurrence when a connection is shut down), reword the message
for clarity, add a newline, and convert the error number to a string.
Also replace the printf() in spdk_nbd_start() with a SPDK log message.
Change-Id: I35e493100e63f84a9b7257c6f84dad77e9a0d335
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391025
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Moving forward, the spdk_blob returned to users will
actually be an I/O channel - not the blob structure
itself. So rename the existing spdk_blob to spdk_blob_data.
spdk_blob_data will continue to contain global state for
the blob. In the future spdk_blob will point to an
I/O channel for the blob - for now it effectively still
points to the spdk_blob_data, but by changing the
structure names here it will reduce the code churn in
future patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7d0cbc0553f68f96c24173c833091a80d058eb89
Reviewed-on: https://review.gerrithub.io/390900
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This keeps the top level functions as simple pass-throughs
which will simplify some future commits.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6578a1440d0404f600c055a5e37f28468b633d6f
Reviewed-on: https://review.gerrithub.io/390899
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I8b70d25d1b245bdb3f6fcd79599a2907a6d5bddc
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/391143
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: To get the name of a mempool
Change-Id: Ic23f93a03db9bcef54808dfd350b1403a47c21d7
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/390937
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Starting with a8c375ad, virtio-scsi devices are enumerated from 1. This
is a change in previous behaviour where devices were enumerated from 0.
This commit restore the behaviour of the last stable SPDK release.
Change-Id: Ia8e7dc13e0831e603af831eeab67796025fce417
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-on: https://review.gerrithub.io/391085
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23f71ff38b805723d74aca639489e0079ecdb993
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/390341
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
According to the rte_mempool.h, the retrieved pointer will be
valid when rte_mempool_get() returns 0.
Change-Id: Iac8a62f9dd39cd7b70478009503f17d78375a124
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391161
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch do not actually reset the aio controller, but make sure all
the IOs inflight return back to client before we return success status of
lun reset command.
Change-Id: I473b5f8d795cdc2a32b69cfffcce5a2925a252f6
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/386837
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
VFIO requires at least one IOMMU group to be added to the
VFIO container to be able to perform any IOMMU operations
on that container. [1] Without any groups added, VFIO_IOMMU_MAP_DMA
would always respond with errno 22 (Invalid argument).
Also, if the last IOMMU group is removed from the container
(device hotremove), all the IOMMU mappings are lost.
In both cases we need to remap vfio memory as soon as the
first IOMMU group is attached. The attach is done inside
DPDK during device attach and we can't hook into it directly.
Instead, this patch hooks into our PCI init/fini callbacks.
There's now a PCI device ref counter in our vfio manager and
a history of all registered memory pages. When the refcount
is increased from 0 to 1, the vtophys will remap all vfio
dma memory.
[1] https://www.kernel.org/doc/Documentation/vfio.txt
"On its own, the container provides little functionality,
with all but a couple version and extension query interfaces
locked away. The user needs to add a group into the container
for the next level of functionality. [...] With a group
(or groups) attached to a container, the remaining ioctls
become available, enabling access to the VFIO IOMMU
interfaces."
Change-Id: I744e07043dbe7ffd433fc95d604dad39647675f4
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390655
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Require braces around all conditional statements, e.g.:
if (cond)
statement();
becomes:
if (cond) {
statement();
}
This is the style used through most of the SPDK code, but several
exceptions crept in over time. Add the astyle option to make sure we
are consistent.
Change-Id: I5a71980147fe8dfb471ff42e8bc06db2124a1a7f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390914
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Send all of the initialization ioctls from the SPDK thread running
spdk_nbd_start(), rather than in the pthread spawned to handle the
blocking NBD_DO_IT ioctl.
This allows the parameter to the pthread to be a single value (dev_fd),
rather than a pointer to the whole spdk_nbd_disk, which fixes a race on
shutdown where the main thread is freeing the spdk_nbd_disk while the
kernel thread is accessing nbd->dev_fd to send the cleanup ioctls.
Change-Id: Ibe5ca4abac97ac567b294da1f8a92f12eece45b8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391021
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Disallow multiple I/O queues for the same controller with the same queue
ID. NVMe-oF 1.0 ECN 001 specifies that this condition should return a
status value of Command Sequence Error.
Change-Id: I41126ddec388a985c403025e099ab15da5d3987c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390662
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To make the error message more clear.
Change-Id: I95a9a3e06f4473da30d022134a8da764f165a070
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/388880
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At present, get_nbd_disks RPC can receive info
about SPDK exported nbd devices and corresponding
bdev names.
Change-Id: I04390c7faa6f698a703a599a152cff65fc8be546
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/390610
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
argument 'name' was added as optional but it was requiered
to create new virtio device, causing incorrect parsing
of arguments. Also, there were missing names in output when
creating multitarget device
Change-Id: I3a3b68fd91c3aecbe94f91d95299d042b1dec7b8
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/390805
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added new keyword 'Target' that will replace 'Dev'.
'Dev' is still usable, but deprecated and will be removed.
Change-Id: Iafd6114ef2cc5b2f8d58497e9fb454a3a237ed16
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/388568
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Multiple nbd disks can be enabled by it. These
created nbd disks can only be running on app start
core at present.
Stop running spdk_nbd_disk by nbd subsystem_fini
Example nbd start rpc request:
{
"jsonrpc": "2.0",
"id": 1,
"method": "start_nbd_disk",
"params": {
"bdev_name": "AIO1",
"nbd_device": "/dev/nbd1"
}
}
Change-Id: I426a10e2fe709f1862e44a7b75318ccb83517b3e
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/390344
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Record multiple nbd-disks by linking them into
g_spdk_nbd. Multiple nbd-disks cat be created or
stopped by upcoming nbd RPC.
Change-Id: I868d07d33981c94c1f06a1b31cf55e91d9df4fa8
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/390170
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Upcoming nbd RPC functions need to track nbd_path.
Export spdk_nbd_disk's nbd_path and bdev_name by
short functions, and list these functions into
nbd_internal.h
Change-Id: I0ca021a5c83e860ad7513b89c9c7783722ab875a
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/390343
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add g_spdk_nbd to record multi-nbd-disk in the
future. nbd subsystem will be used to init and
finish g_spdk_nbd and its linked spdk_nbd_disk.
Change-Id: Ia67caa57b9920d0080f8b2fa1c8e87615803e5fe
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/390097
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
nbd poller is put into spdk_nbd_disk.
nbd test app no longer needs to process spdk_bdev.
This enables upcomming patches to move nbd test app
functionality to SPDK library.
Change-Id: I1b563a49dc9488e8dcc20706be82b17fdbd07ff1
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/390093
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie7a6513d45652d4a6420ac52b5ded39581d688c6
Reviewed-on: https://review.gerrithub.io/388944
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In principle, we should not have active tasks, which means
that lun->tasks should be empty. But for the exceptional case,
we may still need to handle those active tasks, to make
the scsi related application continue running instead of quit.
We should not directly call spdk_scsi_lun_complete_task since
those tasks are already sent to bdev layer. And finally, those
tasks will be return (even aborted) by call backs. So we only need to
set task status to condition, but
not call spdk_scsi_lun_complete_task directly.
Change-Id: I6af2bda0f0b1de7b0c655d2ac2980ddca48c1162
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/386817
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Struct spdk_scsi_lun has the claimed flag as a member.
However the claimed flag is no longer required.
Moreover the claimed flag itself is not used but
spdk_scsi_lun_claim() and _unclaim() functions are used in the
UT code by hard to understand manner. Moving the logic into
spdk_scsi_lun_construct() and _destruct() in the UT code will
be more natural.
Hence remove the claimed flag from LUN and do a little refactoring
in the UT code.
Change-Id: Ica9680b49bbdb5be7c5c4161210fb3a6dcb35229
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/390566
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Based on the PG-IG map tree implmentation, the following new
JSON-RPC commands are supported:
- add_pg_ig_maps
- delete_pg_ig_maps
Change-Id: Iebc48e379aa8e06b5e7d57935845d6fd53f7f826
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379936
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch add the internal mechanism to add/remove PG-IG maps
to/from an existing iSCSI target.
Next patch will add new JSON-RPC commands and python scripts.
Change-Id: Ib75d180197c5cb679ebfd21324dc36790b50a7aa
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/389667
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
In iSCSI specification RFC7143, there is the following description
in the section 7.13:
All violations of iSCSI PDU exchange sequences specified in this
document are also protocol errors.
Any protocol error should be handled as iSCSI Reject response whose
the reject reason is Protocol Error.
However current implementation handles a minor PDU error as Drop
connection. This is too severe and change the code from Drop
connection to Reject response.
This issue was detected by libiscsi test suite.
Change-Id: Ie85c56f5dd523445530ec1ff71eda4f594ab73a0
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/389941
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Currently even if PG mapping is removed from iSCSI target,
corresponding SCSI port is not removed. Hence dynamic
reconfiguration of PG to existing iSCSI target is not supported.
This patch supports dynamic SCSI port removal when the
corresponding PG mapping is removed from the existing target.
Some refactoring for SCSI port addition is also done
Change-Id: Ib06bc10743eb088d023f425742e39bb24f1b0df1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/389056
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Disambiguate the log components from the trace functionality
(include/spdk/trace.h).
The internal spdk_trace_flag structure and related functions will be
renamed in a later commit - this is just a find and replace on
SPDK_TRACE_* and SPDK_LOG_REGISTER_TRACE_FLAG().
Change-Id: I617bd5a9fbe35ffb44ae6020b292658c094a0ad6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
MaxQueueDepth is configurable for NVMf target by configuration
file. This patch makes this flexibility possible for iSCSI target
too. Increasing macro-defined constant for MaxQueueDepth consume
extra memory regardless of the necessity and hence it may be
better to avoid that.
Change-Id: I7fa9cf86b02c5a8b16411d4b4d356c6e6c0dc3eb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/388552
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b77f8aa8e20a277d0a5e53688d7cef8674d6244
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/390497
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move some of the code out of the function and rename it
to spdk_nvmf_rdma_qpair_initialize. In the future, the
operations left in initialize will end up being
deferred until the qpair is assigned to a poll group.
However, for this patch there is no functional change.
Change-Id: I0f64489ffbf1f8957358d3b1781acc430b77717c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389650
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
All TCP socket operations in iSCSI should go through
functions defined in sock.c.
Two close() calls did not, so they are fixed in this patch.
Change-Id: Ia5a87fd4085eb5b7e6732dc7a505e19994669a7e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/390568
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
NVMe specification 1.3 added a new Admin command: Doorbell buffer config,
which is used to enhance the performance of host software running in
Virtual Machine, and the Doorbell buffer config feature is only used
for emulated NVMe controllers. There are two buffers: "shadow doorbell"
and "eventidx", host software running in VM will update appropriate
entry in the Shadow doorbell buffer instead of controller's doorbell
registers.
Change-Id: I639ddb5b9a0ca0305bf84035ca2a5e215be06b46
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/383042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function just needs to zero out metadata so that the
blobstore is effectively destroyed. If the user wants
to unmap the rest of the disk after the blobstore is
destroyed, they are free to do so. On future initializations
of blobstores the code will do the unmapping, so performance
is not impacted.
While here, implement the zeroing using the new
write_zeroes functionality instead of allocating a buffer
full of zeroes.
Change-Id: I7f18be0fd5e13a48b171ab3f4d5f5e12876023bc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/390307
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Unmaps are only used within blobstore to improve device performance,
never to zero blocks. Therefore, if the device does not support
unmap, just skip it instead of writing zeroes.
This is different than devices that elect to implement the write
zeroes command as an unmap because they will return 0 for
subsequent reads. That optimization is still in effect.
Change-Id: Ie1bf98fe86d73b4ac40b41c0d2804db325716500
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/390306
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch just make sure SPDK support the hotplug of vfio-attached devices,
but there still issues when we get hotplug events from kernel, this patch tested
based on my modified local vfio-pci driver which just for test purpose and not upstream.
Change-Id: I974177e70e4133d2a583d00e714a7607765d3548
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/390580
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I054b0f20fa502f30ae3802f95ef108fc92132ff5
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/390558
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I927d659c93787f7ff15cb5aeb2a1c00d3e90e68a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/390514
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This distinction was required to
be able to check if device has been
scanned already. However, with the
upcoming eventq support it will
be possible to re-scan the device
at any time. We could move the
vdev back and forth between the
lists, bu now that SCSI devices have
their own virtio_scsi_dev struct,
we can remove this distinction and
check the scan status from within
the struct itself.
Change-Id: If57e7ce4b9ce900aa36a5aeba9e4b4a432d3c757
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390109
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Virtio-SCSI devices now have their
own structs. This patch introduces
only the struct, no functionality
has changed.
Change-Id: I04907497ed173747875e1b67acad38043bf4de09
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390108
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Cleaned up and expanded documentation
of virtio bdev module.
Change-Id: I4b989ed8b4d5e0bc66c0f0706e61219daf4e2869
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390107
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change the command-line -r option to take precedence over the [Rpc]
section of the configuration file.
Change-Id: I6f043bafaa8b0ede10dd8a483ca77ad34ff7639a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390329
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The config_text callback should only add a [Rpc] section if an
address is configured.
This avoids printing out a bogus configuration file
section with "Listen (null)".
Change-Id: Ibb734f6faab4c2587203623eee8a193f9a7207ba
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390328
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added virtio_pci_dev_init, an equivalent to
virtio_user_dev_init. It takes an opaque pci
context pointer that is provided via virtio
PCI enumerate API.
virtio_pci will do only PCI-related
initialization. The virtio_dev creation
and SCSI-specific logic now belong to upper
layers
Change-Id: I7ad450591f893c4ab953c09cfb6441b186736751
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388302
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3cbb52cd9a4201704423b49eae74935b8a33b0fd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389903
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Some places used the convention 'rqpair' and others
'rdma_qpair'. For consistency, name them all 'rqpair'.
Change-Id: I131833d14efdfdbcbb99bea5d64cbcf99d9ec90b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389649
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I9afa07b5dae99955ba87d7c8130b2ce6f04e7941
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389641
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is a 1:1 correspondence between the two, but it is much
more useful to have a pointer to the poll group.
Change-Id: I8494b0573a9b2cce5819545548d0c65a18bdbe86
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389640
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
These aren't used quite yet, but they'll need to be called
by the user's application.
Change-Id: Id1fc44859350451a3e224f725add60d3a878d077
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389639
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There isn't a way to remove a namespace just yet, but at least
adding one works.
Change-Id: I99416d1bc9cbc0e2303c16040d2311a07829cbea
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388293
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows the to use a virtio_dev allocated as
a part of bigger struct - possibly a SCSI/BLK
specific wrapper.
As a part of this refactor, multiple vdev-related
functions have been renamed to keep the API clean.
Change-Id: If84bf03e4a1642869c2f1ba93939fb32c8fb5d57
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388298
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested with bdevio, hardcoded TUR response to test the start/stop
unit code
Change-Id: I5038e6bcce9fcd423f1b93c8bb8b466ee3817654
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/387183
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4966d19b06d37bbcf4527cbd9c206e9a553e8fd2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390083
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is a preparation for dynamic reconfiguration of PG-IG maps.
Current PG-IG map is implemented by a fixed-size array. Linked list
will make much easier to support dynamic reconfiguration of PG-IG maps.
Current:
target - (1..n) ---> PG_map (1..1) -> PG
|
--> IG_map (1..1) -> IG
This proposal:
target - (1..n) -> PG_map --- (1..1) -> PG
|
-- (1..m) -> IG_map - (1..1) -> IG
Change-Id: I92f668b81cdd8003aff222926f8f1ed96b61e56d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385532
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Similar flags will be added at the blobstore level in a future
patch.
This allows backwards compatibility - i.e. allow older blobstore
applications to open blobstores created by newer blobstore
applications with new features. Any blob's using a new feature
should have an associated flag set in one of three new flag masks:
- invalid: if a bit is set in this mask that the application is not
aware of, do not allow the blob to be opened
- data_ro: if a bit is set in this mask that the application is not
aware of, allow the blob to be opened, but do not allow
write I/O nor any operation that changes metadata
- md_ro: if a bit is set in this mask that the application is not
aware of, allow the blob to be opened for performing any
kind of I/O, but do not allow any operation that changes
metadata
While here, bump SPDK_BS_VERSION to 3. We intend this to be the
last change made to SPDK_BS_VERSION - future versioning will be
done via blobstore or per-blob feature flags instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If059e38bfffbeec25c849a7629a81193b12302c4
Reviewed-on: https://review.gerrithub.io/388703
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some nbd io type has no payload, like NBD_CMD_DISC.
Change-Id: I17babf625f51d32bf07fa7a9b6a7396660b39cd5
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/389779
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By supporting the management based on linked list for PG and IG
the group state of PG and IG are no longer necessary.
Change-Id: I249424cacd2d27dda4e4cb2182442d0d1e9bfb8e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/388863
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Current fixed sized array for iSCSI target is not thread safe.
When newly created targets are inserted into the array, multiple
targets may be inserted into the same position. Linked list is
better than fixed size array to support dynamic reconfiguration.
Change-Id: I4db5a3ec16844db06e0cfcd2aef1f97952f15afa
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385371
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The results of access control procedure for login in the
spdk_iscsi_tgt_node_access() is defined in the following table:
+------------------------------+
|iscsi name |netmask |result |
+------------------------------+
+------------------------------+
|denied |- |denied |
+------------------------------+
|allowed |allowed |allowed |
+------------------------------+
|allowed |denied |next IG |
+------------------------------+
|not found |- |next IG |
+------------------------------+
However current implementation have redundant repetition in the
spdk_iscsi_tgt_node_access() and the above definition is not
visible. Hence refactor spdk_iscsi_tgt_node_access().
Besides refactor spdk_iscsi_tgt_node_allow_iscsi_name() because
it has redundant repetition too.
Add UT code for these changes.
Change-Id: If06d87c1246c85439ee0482149bd887a7b53b169
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379935
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Naming rule of access control of iSCSI target does not reveal its
intention. Hence change it before refactoring to avoid unnecessary
repeated procedure.
Change-Id: I4064ec0a5a2b52244b6de3958ee2ab41342d1a57
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381248
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
In the accessibility control of iSCSI target, "ALL" is used to allow
ANY IP address-port pair or iSCSI name of initiators. However iSCSI
targets cannot know ALL initiators beforehand.
Hence "ANY" will be better than "ALL" and will avoid misunderstanding.
Comments and iscsi_tgt test code are also changed and UT code is added.
Change-Id: Id004d819df6e9ee89f6c1db2e4b4c149be062733
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385168
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Althrough the two functions are empty now, but they are not
vhost_scsi specific.
Change-Id: I331a455374f7dd92fd76cab255a43072baceb0dd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/389477
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the existing bdev_null_destruct() function instead of open-coding
the bdev cleanup; the bdev_null_finish() path neglected to free the bdev
name.
Change-Id: Ie74be39b0475674f70c3999bbe2f21caab2e2e20
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389867
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As of this patch, it is unused.
Change-Id: I15f42b8cc43e3792ae69c91f3911b7853d5b5664
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388292
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It has all the same properties of uniqueness, so
implement it as an io_channel to take advantage
of the other infrastructure for message passing
already available.
Change-Id: I1777b91f0597a5a43ac0d0bbfdf878e874eb04f3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388291
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This correctly puts all of the I/O channels on the right
thread during shutdown.
Change-Id: I432c8cb981a68b40639f8876dae42597a9e6a85f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/389637
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When device was reinitialized, the old
virtqueue memory used to leak. While
here, also added a doc for virtio_dev_init.
Change-Id: I9bb8dbfa5d68deeb73e71567a7e51b82f869537a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388297
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The vbdev_* functions that were declared in lvol.h are all internal to
the lvol vbdev implementation; they don't need to be in the public
header.
vbdev_get_lvs_bdev_by_lvs() is moved to the top of the file so it
doesn't need a forward declaration (no code change).
Change-Id: I98282d3cb0008da5c5b5059eee335219dc929f1c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389894
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modify the vbdev_get_lvol_store_by_uuid() API function to take the UUID
as a string instead of a uuid_t, since this simplifies the calling code.
This also allows us to remove #include <uuid/uuid.h> from the public
API, giving us the freedom to change the underlying UUID implementation
later if necessary without breaking API.
Change-Id: Ib360281f384f95722c5ab64e75dcf3603f826e4c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389893
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All of the call sites already have a lvs pointer; there's no need to
look up the lvs by UUID again.
Change-Id: Icef54d84e7c89f682ea47f10b282839ab4237ce0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The array of message strings is now only used in vhost_user.c, so it
doesn't need to be exported.
Change-Id: I40163b95a52a1762eb3639db5553814bf1299959
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389652
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The bdev module get_ctx_size callback is only necessary if it returns a
non-zero size.
Change-Id: I00ca366b8a1949bdb091c5e8aefb19cb606481d0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389900
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Rather than iterating over the g_nvme_bdevs list to determine if a bdev
is an NVMe bdev, we can just compare the module pointer.
Also, the function can take a spdk_bdev pointer directly rather than
casting from a void pointer.
Change-Id: Iccf3c9b3263e9b2d67d07d037dc00d1cbc0f22a1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389899
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch will make sure the nvme bdev work in correct way when we delete
bdev by using rpc method and then exit the app.
Change-Id: I19172440d46d96c7396282e1bef07d98ab601390
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/389930
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
replace the bdev_nvme_destruct() with spdk_bdev_unregister(),
clean all the resource in the bdev layer.
Change-Id: Ic4b85dee6225f42babe868796a8c24dec5c22af6
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/389855
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Currently SPDK NVMeoF will allocate data buffer from mempool, however,
some data buffers may not block size aligned, this is okay for NVMe
backend but will fail for AIO backend. 4KiB aligned data buffers
should be okay for most AIO backends.
Change-Id: If7b9c2962d716addbd755e80e59620377f2ba488
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/389245
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The 'm' variable was only used in sizeof expressions; m was a struct
vhost_user_msg, and we already have one of those called 'msg' in the
function where it was needed.
A previous commit removed a RTE_USED() marking on m, which introduced a
warning on clang, since it can now see that m is unused.
Fixes: 73bfcede86 ("rte_virtio: remove rte_memzone from vq")
Change-Id: I63eb0d82c7c750b4181b6312bbda82ef3213c205
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389648
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Also removed vdev->started field.
Used vdev->status field to determine
if a device has been `started`.
This is simply a cleanup.
Change-Id: Ieb06b03b3bd60bd5906b41c987c418604906c913
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388296
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Now that vtpci_internal has been removed,
the vdev->id and g_ctrlr_counter are
obsolete and can be removed as well.
Change-Id: Ia1e83cdc81552173f4b57283f83c5791e2b90daa
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388301
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Removed another direct DPDK dependency.
Change-Id: I12d9a49fb16fbefad42c09f46c280f6f7be094d1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388300
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Use standard spdk_dma_malloc instead.
This removes another direct DPDK
dependency. Yet, for multi-process
support we will more likely use a
memzone for the entire virtio device,
not it's virtqueues.
Change-Id: I57119ad830b573b718605b46cc3099b105651ee9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385629
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Replaced them with spdk alternatives.
While here, also clarified the documentation
for virtio_*mb.
Change-Id: Ia604e9abd8eadc18fa3ea1a782e29e7da6b3c162
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385627
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Currently there are a bunch of asserts() on metadata
descriptors - change these to fail the blob parsing
instead.
While here also return -ENOMEM if any of the memory
allocations fail.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie37b73c57b304d05a45d10a8d33bcc1d47e7a1be
Reviewed-on: https://review.gerrithub.io/388702
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
data_ro means that write, write_zeroes and unmap operations are not
allowed.
md_ro means that resize, set_xattr and remove_xattr are not
allowed.
There is no code yet that can activate this - it is coming in a future
patch. Two usages are planned though:
1) a user explicitly marks a blob as read-only - this is persisted so that
future loads of the blob will ensure the blob cannot be modified - neither
metadata nor data
2) a future feature flag framework (how's that for alliteration) may allow
a blob to be opened, but not allow metadata modifications, if there are
feature flags set in the blob's or blobstore's metadata that the
application does not understand
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I247fd900430c56f7176edfb80dddd5a1a6c8dc87
Reviewed-on: https://review.gerrithub.io/388663
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There are two ways to set stockets to nonblocking type:
- ioctl with FIONBIO
- fcntl with O_NONBLOCK
Those two should be equivalent for sockets used in SPDK.
During testing it was shown that VPP interprets only
the second type, so this patch changes all occurences of it.
When here, more descriptive error logs were set in case of
failure.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifa5b30e3a4fa04fe23f41fa2ae9dab4b01dd7d3c
Reviewed-on: https://review.gerrithub.io/388816
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Moved some vq-related functions
to virtio.c. It's the only place
they're used in.
This patch also removes the
virtqueue_full() function. It's
not used anywhere.
Note: all the functions content
has been moved 1:1.
Change-Id: Ib854fc0836378e6955c0a7358ecabcf2c3107d06
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385628
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Only multi-process shared controllers should be inserted into the shared
list in g_spdk_nvme_driver. To accomplish this, create a second
per-process global list of attached controllers (g_nvme_attached_ctrlrs)
and rename the driver struct field to shared_attached_ctrlrs to clarify
its purpose. Additionally, a new helper function, nvme_ctrlr_shared(),
returns whether a given controller should be on the shared or
per-process list.
Change-Id: I46d4e558ece8b7fc3d28868e32bb56d794f21aab
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389190
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Simplify the PCIe transport by using an existing function to look up a
controller by transport ID.
Change-Id: I261865df1ba23069b052ca64944b7637d70c85ba
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388701
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each process should manage its own list of controllers that are
initializing; the list doesn't need to be shared between processes.
This is the first step toward preventing non-PCI controllers from being
added into the shared attached_ctrlrs list.
Change-Id: Ia6f85fe89e28a04f0950da5362bb2f49d1b76da9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388695
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the user calls spdk_rpc_close() multiple times, there would be a
double free. This is not normally possible when using the SPDK event
framework RPC subsystem, since it will only call spdk_rpc_close() once,
but it doesn't hurt to make the RPC library public API handle this case.
Fixes GitHub issue #219.
Change-Id: I80cff0ed871dec6b90bd2658e85b0cd0914b6ada
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389394
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change the return type of spdk_bdev_register related
functions and try to handle the duplicated name
issue.
Change-Id: I23af11583cf2050579d1624508306a35394bffde
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/388178
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use the new one from io_channel.h.
Change-Id: I7bf6729caf6eeebcb58450a36119601957ad5da4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388290
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This function will send a message to each allocated
thread asynchronously, then call a callback on
the originating thread.
Change-Id: I3ebe7c6c5b460a944a32487d1091b601a482a256
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388041
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This simplifies the public API and requirements for
user applications.
Change-Id: Ibb0d25a7838a0fa683f39e79cb4fef78adf6aee8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388040
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Using pthead_detach to let system take back the resources owned
by SPDK created thread for nbd kernel module.
Change-Id: I39f3c0b60ecf57f3227a7b4733a0f144a6e169c5
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/388722
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Make this generic and not directly dependent on
the event framework. That way our libraries can
register pollers without adding a dependency.
Change-Id: I7ad7a7ddc131596ca1791a7b0f43dabfda050f5f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387690
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id0f7751d8889584fff1a947160ee89e2f158af1c
Reviewed-on: https://review.gerrithub.io/388943
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With configuration where there are nested lvol stores we
encounter situation when hotremove and fini functions try
to unload the same lvol store second time (previous unloading
have not finished yet).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Icb5d430d17024fbda0e6113b380d8f346a3e9a84
Reviewed-on: https://review.gerrithub.io/388790
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It doesn't need to be accessed outside of bdev.c.
Change-Id: Ib1a1abe88b0993e391e0a39c5483781b2c0ad523
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388508
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
The io_device_unregister callback might be
deferred and called on a different core, but
the virtio device has to be released from
the same thread that created it. Hence, once
the unregister callback is called, it has
to send yet another msg to the vdev-owning
thread. Since all virtio devices are currently
created on the same thread, no mutexes are
needed. They will need to be introduced once
we publish the API to connect to virtio
controllers.
This patch also defers bdev_virtio module-
-finish until all virtio_devs are destroyed.
Change-Id: Iaafceefa1e862b839b5db8c6c4975bf51441a083
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388835
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will allow us to send a message
to a virtqueue via spdk_thread_send_msg.
Change-Id: I8502f27e74de107bc5e5ccf2939448896579acc2
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388834
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We previously used a separate io_device
for each bdev created from a virtio_dev.
The new approach makes us reuse the same
io_channel for different bdevs on the same
core. It also provides a built-in safety
check for freeing virtio_dev only when
all io_channels on this device have been
closed.
Change-Id: Iaae66964f90aa3cef95ed2e261c6f3dfb2f26caa
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388505
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently on blobstore creation we use write zeros everytime.
Some drives does not support write zeros, but support unmap.
We should do write zeroes only on metadata and try to unmap
data clusters
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iae36c1ccacc08340e79ad40c4c9a2c53dda920ba
Reviewed-on: https://review.gerrithub.io/387152
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Using pthread_create is much cleaner, and avoids race
conditions related to the forked process sharing memory
with the primary process. Specifically this fixes
a double spdk_event_call() of the shutdown event - one
from each process. The primary process may have already
recycled the shutdown event, and when the forked process
calls it again, hilarity ensues.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3e4b77b8b380a8fa0227b770758099bcee0ef35b
Reviewed-on: https://review.gerrithub.io/388520
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
dev_fd => fd for /dev/nbdX device node
spdk_sp_fd => fd that SPDK will use to poll for new
I/O requests from the kernel nbd thread
kernel_sp_fd => fd passed to the kernel to send I/O
to SPDK
This enables an upcoming patch to switch from using
fork() to pthread_create().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0840a35eb1ba12810b7fc12775ee0df9ad3d99f9
Reviewed-on: https://review.gerrithub.io/388519
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
"OK/NG" may be only used in Japan. It may cause misunderstanding.
Hence remove "OK/NG" or change to "Allowed/Denied".
Access control of iSCSI target follows further refactoring.
Hence to save the amount of change, "OK/NG"s are mainly removed.
Change-Id: I1f2ef9bc2be21caa86a6ae98377b6d6b3f85386a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385075
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The vdev->ctx conversion is now
straighforward and doesn't need
any macro.
Change-Id: I88b0cf3fa5e95b93e5f69a0a3ae9508f9fac3683
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385625
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a single header file that
provides access to all virtio initiator
capabilities. This is a preparation
to exporting rte_virtio as a separate
spdk lib. Also renamed virtio_dev.c.
Change-Id: If45a0cadc61943b6ffd87cf70a59321a83b238a6
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385624
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's contents have been moved to
virtio_user/vhost.h and virtio_dev.h.
The virtio_user_dev struct can't be hidden
in virtio_user.c (similarly to the virtio_hw),
due to another abstraction layer in virtio_user
- vhost-user and vhost-kernel. Even though only
vhost-user is implemented now, let's not close
the possibility to implement vhost-kernel in
the future. The vhost-user/vhost-kernel code
should probably be placed in separate files,
with the virtio_user_dev struct in common
vhost.h header.
Change-Id: I36ee96eff30b398dd129953a874513e727619f98
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385622
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Moved it's contents to virtio_user.c.
Having this logic separated across
multiple files doesn't make much sense.
Change-Id: Ib2daaa56e1b3d755d9476abca247c7cbcfa7096b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385621
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Renamed all vtpci functions.
While here, also added some documentation.
Change-Id: Id24aaab8c5b556b969c60ee1c95b9d46936ea13d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385426
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
virtio_hw struct definition is now hidden
in virtio_pci.c. The API to enumerate all
PCI devices is available through virtio_dev.h.
Change-Id: Ib9c968732d9f78204e9664c426ad99542cfe8c93
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385425
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The vtpci layer is about to be removed.
This is only 1:1 code move, all functions
will be renamed/refactored in future patches.
Change-Id: I63c1b30fdaf6eff2e5d8bf60e62c87c2cb9f2b15
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385424
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that legacy PCI support has
been dropped, we can safely assume
there's only one backend type
per device. So the vtpci_internal
- containing process-local data -
can be removed.
Change-Id: I15d87a280b74318c7a44ee60ce3408756d1f5a69
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385423
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch initiates the removal
of the vtpci layer from rte_virtio.
The general idea is to provide separate
virtio_dev_construct and virtio_dev_init
functions. construct would just allocate
and setup the struct data. init would
be the one to start the device via
MMIO/vhost-user. virtio_dev_construct
takes 2 params - backend ops and backend
context. The context is kept as void*
and can be cast to proper structs inside
backend ops callbacks.
Change-Id: I1d6d92e1cf09b9d0c9fa4fd2cb70203e3fc7e65b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/387553
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We currently pass virtio_user_dev as
an argument to various function in belief
they will access the virtio_dev via
virtio_user_dev->vdev field. However,
this field is about to be removed soon.
This patch is a mid-step towards a bigger
change. See the next patch for details.
Change-Id: Ie684aa1614d9777d79d350bbfda79effe2a2d5f6
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385422
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
It's been only used in 1 place.
Change-Id: I0b7c9cdb809a6946eda5ee361362dec86e57b4ef
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385623
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is required for future changes.
The general idea is to provide separate
virtio_dev_construct and virtio_dev_init
functions. construct would just allocate
and setup the struct data, while init
would be the one to start the device via
MMIO/vhost-user. If we want to destruct
a non-initialized device, there's no
need to do a reset.
Change-Id: Ib8ce56169e86e43fba8fcd1bf6c2a5b12ed99966
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Even though config change intrrupt
handlers are still required, we need
them only for real PCI devices.
They should be handled internally
in vhost_pci.
However, current QEMU implementation
doesn't ever change SCSI PCI config,
so no interrupt handler is required
for now.
We might want to add it together with
Virtio-Blk, as PCI config will change
there with each resize.
Change-Id: Iece024cd31c788857ce900385e289758ca3f5948
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385304
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
It's been only used in 1 place.
Change-Id: I3e933d3fb0816ea30f983fb3de69ce49238c3b72
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385303
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
When there are no lvols present on lvol store
spdk_bdev_module_examine_done function is not called
when tasting is done.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia6c559f392148e3b4444dbc547df462bbe02356d
Reviewed-on: https://review.gerrithub.io/388402
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To add initiators to an existing target, manage name and netmask
of initiator group by linked list. It is not easy for array to
detect duplication and change configuration.
Change-Id: Id9e77740e24ac309a33d8de1be37663681160d94
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379932
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_iscsi_init_grp_create_from_configfile() returns 0 even if
creating an initiator group (IG) is failed due to empty netmask or
initiator name. This will be unexpected behavior for end users.
Hence change the return code from 0 to -ENVAL for this failure.
Besides do the following.
Change other error return codes in the function by using errno too.
Current IG don't have any UT code in repository. UT code to confirm
this fix is also submitted.
Change-Id: Ic918feb5c6a3e772b325664d881b2673b553a217
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/384408
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic11a56c5616098ff42f31f78aa96289af5965118
Reviewed-on: https://review.gerrithub.io/387611
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: If89275acfb1560982e332148a99ed3c83f8cb34f
Reviewed-on: https://review.gerrithub.io/387609
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We used to unlink the unix domain socket
regardless of who created it. Even we
got the "socket already exists" error
on init, we would still unlink the socket
on shutdown.
Change-Id: Ib14382d6d7e127d8f51f6544cbb063594e040879
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388284
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Deinitialize only those subsystem that
have been fully initialized.
Change-Id: I86cdd4cda0a80c107956843ed8198072e898a743
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/386892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_bdev_nvme_io_passthru_md() is verified on QEMU NVMe
and will be verified on Cosmos mini OpenSSD.
Change-Id: Ib759b6b6095deaa4ae7cf746f3a241f678295605
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/387114
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- for environments that don't support rlimits
Change-Id: I6dde1eb9e1cb2274462a450625d8bc70a3889163
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/386355
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We probably do not allocate the mgmt_channel when we destroy the
rdma queue pair, add the judgment before put the io channnel.
Change-Id: I528c9686907c04c5025ff9d3872f24f2996e9d33
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/388159
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change the return type of spdk_channel_msg from
void to int. If this msg executed in a failure,
we do not need continue sending the message to other
threads, we can just tell the original thread, and
let the orgiginal thread call the spdk_channel_for_each_cpl
call back.
Thus we can track the qpair creation/destroy case for bdev
reset in nvme bdev module;
Change-Id: Ide9dffd1f84a29fcf61d8339a9ece2a0245d968d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/387284
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8ea8c59a0c67176c0c0c39abf807afad61ff3828
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387689
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I864cd8a6c206dfbe62fcb3f72275c1ae51aa4ed7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387688
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We always unregister pollers from the core they're running on,
so we don't need the async completion event when unregistering
them. To avoid changing the logic, create events instead.
Change-Id: Ib50d93e1578684bea69200d89a5e0d383acc8cfe
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387685
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Register all pollers to the current core. If necessary, send
an event to the correct core before registering.
Change-Id: Ie34cc8b11143a58c0f621c87c409a3d09d929648
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387682
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is the inverse operation of spdk_io_channel_get_ctx.
Change-Id: Ica6593240dfb05cb53dc7ec910bc0a78270e81c0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/387679
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ib1e184f831eef82432308279c6d8ea43088748ef
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/387273
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the env abstraction PCI functions to compare PCI addresses so that
details like whether or not domain is specified or whether 0-padding is
present don't affect the comparison.
For example, 0000:01:00.0 should compare equal to 01:00.0.
Change-Id: I9f3aaeb5f8fdbf3e246e31a41b4c09151288015e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/387202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ibe31b961fec36644cf64716c512429d68e873e88
Signed-off-by: Ed rodriguez <edwinr@netapp.com>
Reviewed-on: https://review.gerrithub.io/386170
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently when one of lvols fail during loading we end up
with empty lvol store loaded, where we actually should
unload lvol store as well.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I90ce3b79baba0db0d875b106c94924be394aada9
Reviewed-on: https://review.gerrithub.io/385950
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch make the cache buffer shift of blobfs configurable. We
can configure the cache buffer shift according workload, it will
help to improve the performance.
Change-Id: Ied1c2e5d6fd9eaa7aa0759c03c654fcf2e77aa23
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/383381
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This helps enforce uniqueness of the subsystem id and
allows for quick lookup by that id.
Change-Id: I4d2948892839d42b8c2b2a406682848415ad2bd6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376251
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
DPDK 17.11-rc3 removes pci_probe*
and pci_detach functions. It introduces
different ones - rte_eal_dev_attach/detach.
Those have a slightly different signature.
Change-Id: Iadde9ff37c64190dad41929997f9ff78379f36e1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/387656
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DPDK 17.11-rc1 moved a part of it's
eal code into two separate libraries.
Change-Id: Ibcea448487a001c30abb68447e3fe2104ba9a7c3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/387655
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DPDK 17.11-rc3 switched to IOVA-centric
addressing. The old API is still available,
but is deprecated.
Change-Id: I7b54a1e626e39368acd2190dec725dbf30c7a5de
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/387654
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DPDK 17.11 removed all rte_config.h includes
from rte_*.h headers, meaning we should either
use gcc param -include rte_config.h (just
like DPDK does), or include this file before
each other rte_*.h include. Since we're using
the latter approach in many places already,
I decided to follow it.
While here, also removed rte_vdev.h dependency
from rte_virtio/virtio_user.c. It's not used
anyway.
Change-Id: I865ee9f828211c03a60fd0446f7a418d5dddd140
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/387653
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Legacy PCI code is hard to maintain
and compiles with DPDK 17.05 only.
If we ever need this functionality
in SPDK, we should first add proper
env/pci layer for direct UIO/VFIO
communication, and then revisit this
topic.
Change-Id: I25622c16f467633e01003c9edbb7e6f297c68a86
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/385302
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Because ppc64 has less strict memory ordering behaviour
than x86 we need to introduce a memory barrier when
polling for completions due to possible reordering
of tracker and cpl access.
Change-Id: Id17116c38b2ba69154c175c539fc97c60897deb0
Signed-off-by: Jonas Pfefferle <jpf@zurich.ibm.com>
Reviewed-on: https://review.gerrithub.io/383728
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
When an iSCSI connection is closed, spdk_iscsi_conn_stop_poller()
is called in spdk_iscsi_conn_destruct() or
spdk_iscsi_conn_check_shutdown().
However, through both paths, g_num_connections[] is decremented
twice:
(1) in spdk_iscsi_conn_stop_poller()
(2) in spdk_iscsi_conn_free()
This behavior makes g_num_connections[] negative unexpectedly and
for some cases load balancing does not work and the same CPU is
always selected.
How to fix:
spdk_iscsi_conn_stop_poller() is called in the following functions:
- spdk_iscsi_conn_check_shutdown()
- spdk_iscsi_conn_destruct()
- spdk_iscsi_conn_handle_idle().
[Idea 1]
Remove the code to decrement g_num_connections[] from
spdk_iscsi_conn_free().
[Idea 2]
Remove the code to decrement g_num_connections[] from
spdk_iscsi_conn_stop_poller(). Add the code to decrement
g_num_connections[] to __add_idle_conn().
[Idea 1] is simple because just only one line is deleted.
[Idea 2] may be more symmetric than [Idea 1] but to find the right
place to add the code in __add_idle_conn() is not clear and
difficult.
Hence [Idea 1] is proposed.
[Idea 1] may not be the optimal one and more refactoring may be
done.
Change-Id: I81050f4a0e7b3ddd40896f46ab2eb8de14bbcb3a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/384026
Reviewed-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I2524b7881885a0784492a8189bf22a0b8c92d470
Signed-off-by: Ed rodriguez <edwinr@netapp.com>
Reviewed-on: https://review.gerrithub.io/386169
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following functions returns 1 and 0 for succcess and error,
respectively:
- spdk_iscsi_tgt_node_allow_ipv6()
- spdk_iscsi_tgt_node_allow_ipv4()
- spdk_iscsi_tgt_node_allow_netmask()
- spdk_iscsi_tgt_node_access()
Using bool for this purpose will avoid our misunderstanding.
Change-Id: I927876e0503c0eee5364e829a4713f9a345996f6
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/383664
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
In the Appendix C. SendTargets Operation in the iSCSI Specification
(RFC7143), there is the following description:
In a Discovery session, a target MUST return all path information
(IP address-port pairs and Target Portal Group Tags) for the
targets on the target Network Entity that the requesting
initiator is authorized to access.
However no description such that Target Portal Group Tag is used
to check authorization of the requesting initiator.
Moreover, according to the iSCSI Specification (RFC7143),
Target Portal Group Tag is unique within an iSCSI Target Node.
Tarrget Portal Group Tag identifies a portal group within an
iSCSI node.
However, current SPDK uses Target Portal Group Tag to check
authorization of the requesting initiator by mistake. This
implementation does not have any compatibility with other storage.
Hence delete the code related with Target Portal Group Tag from
SendTargets function.
Change-Id: If4b79f0d8fe8f5892a798e4f6716045fd18cf0a4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/383660
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
SPDK have used "*" and "[*]" as wildcard address
for iSCSI network portal. These abbreviations may be convenient
but unusual. If "*" or "[*]" is used, output warning message
and forcefully overwrite "*" or "[*]" by "0.0.0.0" or "[::]"
respectively.
After confirming that the usage of "*" and "[*]" is not used any
more, the code for "*" and "[*]" will be deleted.
Change-Id: Ibb8fb0d4598ffa1f7b1690ad6afd10d5ae162612
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/383556
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is case like no memory to create the channel.
Needs to handle this properly.
Change-Id: I5d13d18037e6aa8f057769b1ef345f45597b22af
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/386016
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are two separate abstraction layers:
* vsocket - which represents a unix domain socket
* virtio_net - which represents a vsocket connection
There can be many connections
on the same socket. vsocket
provides an API to enable/disable
particular virtio features on
the fly, but it's the virtio_net
that uses these features.
virtio_net used to rely on
vsocket->features during
feature negotiation, breaking
the layer encapsulation (and
yet causing a deadlock - two
locks were being locked in a
separate order). Now each
virtio_net device has it's own
copy of vsocket features, created
at the time of virtio_net creation.
vsocket->features have to be
still present, as features can be
enabled/disabled while no
virtio_net device has been
created yet.
Fixes#214
Change-Id: Ic4b2dd8cae6050813fc9a420b2ed30bc5ae60393
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/386294
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The process of spdk_bdev_finish will always result in an
early call to the user's completion notification - prior
to the actual shutdown events happening.
Change-Id: Ib53393deb794b616d2b7ec94cb41502305bd99b7
Reviewed-on: https://review.gerrithub.io/386707
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Idc39c101c23cebe9538d59c0026d169c93c44e23
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/386715
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I482ad9e722f6fb775c1c91c8661212250a6914bc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386722
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some devices may report a RTD3E time that is shorter than their actual
shutdown time in practice; force the timeout to be at least 10 seconds
to allow for a reasonable amount of shutdown time.
This doesn't add any extra delay for devices that do complete the
shutdown process within their reported RTD3E time, since we will return
as soon as the device reports that it is finished shutting down.
Change-Id: I365e66ba6a938400be516df170bd3ff288810caf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386719
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
1) Replace some perror() calls with SPDK_ERRLOG
2) Use spdk_conf_section_get_boolval() to simplify the code
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2a6d0773b09ad16ea35cb6d2f18a9e0977dba31c
Reviewed-on: https://review.gerrithub.io/386666
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With the new asynchronous subsystem finish framework, we can
drive shutdown of existing connections as part of the subsystem
finish path instead of a separate spdk_iscsi_shutdown function
called as the shutdown function in response to SIGINT.
This is a step towards enabling a single target app that
supports multiple protocols (i.e. iSCSI + vhost + NVMe-oF).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id9f596a8091912a72ab7eb93cb45a46fdb130a48
Reviewed-on: https://review.gerrithub.io/386695
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
RPC is a default feature required for almost all usages,
so enable RPC by default, but with a UNIX domain socket
for security reasons.
-r can now be used from the command line to specify
an alternative RPC listen address from the default
/var/tmp/spdk.sock.
Remove the Enable parameter from the Rpc config section
but still allow specifying an alternative listen address
using the Listen parameter as an alternative to the
command line option. This keeps backward compatibility
for this release for anyone using the configuration file
still.
Remove the Rpc sections from all configuration files
that were using them, except for those that specified
alternate TCP ports for multi-process test cases. We
can fix these later to use an alternate UNIX domain
socket and to use the command line instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife0d03fcab638c67b659f1eb85348ddc2b55c4c4
Reviewed-on: https://review.gerrithub.io/386561
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a helper function that eliminates a lot of
duplicated code in our target applications, specifically
around common command line argument parsing and usage
messages. This patch only moves the iscsi, nvmf and
vhost targets to use this function, but there are other
test/example applications that could also take advantage
of it to reduce duplicated code and improve consistency.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1903de3daed90ac6282b006a8283b9df07ce37e9
Reviewed-on: https://review.gerrithub.io/386542
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_sock_getaddr() (in lib/net/sock.c) only support IPv4.
Hence IPv6 cannot be used in SPDK iSCSI target.
By adding the code to support IPv6 transparently, IPv6 becomes
available in SPDK iSCSI target.
Change-Id: I236f2c6cb1e61283dde090729fecd8f743cec3fc
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/383672
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
cmd and cpl rings must be aligned on page size boundaries.
Change-Id: I103eed32adfaa4388bc7d672ee166973f796b343
Signed-off-by: Jonas Pfefferle <jpf@zurich.ibm.com>
Reviewed-on: https://review.gerrithub.io/383727
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Show total accessible clusters when listing lvol stores
instead of total blocks. This is more readable for user.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I22a14f626816769cf2f494ae30cfd8ee63897771
Reviewed-on: https://review.gerrithub.io/385634
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At the moment there was no way to a user of blobstore api to know,
how many clusters are availible to him. Total_clusters describes
number of clusters for metadata and user data.
New field added total_data_clusters, keeping number of clusters
that can be used to create blobs - meaning just user data.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I60555217644557410844f74628375a6b46fd2ac7
Reviewed-on: https://review.gerrithub.io/385633
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows us to remove some duplicated code from our
main target applications.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I15b517fd2b58ce682660b4f6ba0b8412beda053b
Reviewed-on: https://review.gerrithub.io/385714
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
RPC is core functionality for SPDK applications and should always
be initialized last (after all subsystems have been initialized).
So make RPC a first class citizen and integrate it with the
app framework directly instead of making it an "optional" subsystem.
Then we initializing it after all subsystems have completed
initialization, and tear it down before tearing down subsystems.
We can also do some other cleanup while here - for example, reactors
are already started when spdk_rpc_initialize() is called, so remove
the extra event that was added during initialization since this is no
longer needed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4cc63586a6d55be68786629a2176c61a88979267
Reviewed-on: https://review.gerrithub.io/385914
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is a race condition here, where kernel could have
outstanding I/O to nbd device at the same time we terminate
the nbd application. In this case, we cannot free the
spdk_nbd_disk since it contains the io structure that
will be referenced when the SPDK poller completes one
of those I/O.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1bde240af904957f4d2bfa358dc673105d266986
Reviewed-on: https://review.gerrithub.io/385927
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There may have the situation that associated socket does
not have enough memory for the event pool and the related
ring buffer. As the event pool will be created at any
available socket, this will be same for the ring.
The basic idea is to first allocate the memory for the
core associated socket and then try other available sockects
before terminating.
Change-Id: I52c240289899c136b607629c12c0250ad859c8ac
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/385972
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously lack of support for specific bdev was not known to user.
This impacts all unmap operations, such as initialization of blobstore.
It should be useful to user to know it will take longer
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I89bf3bc0342558fda9a8964fb5cb1daa3a8ed79e
Reviewed-on: https://review.gerrithub.io/385999
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The end goal is to have the application create one poll group per core.
Then each poll group will have a single CQ per network device and an I/O
channel per back-end storage device to poll.
This is just the first step toward that, which is to wire up the
creation of the per-core poll groups in the application.
Note that the app poll groups don't do anything yet. We'll need
additional library API changes to make the library use the existing poll
groups, rather than creating a new poll group per subsystem as we do
right now.
Change-Id: I2d4e2a5e5aa354d37714750f1d5b1d1e4ab9edce
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/381887
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a ctrlr is failed to initialize and to respond other
requests, the nvme_ctrlr_fail() will be always called. Add
a log there to have the traddr information so that applications
can know which ctrlr has the problem.
Change-Id: I951062a51349af81a505472f79e3c00a1ead2fbf
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/386189
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
According to the current code, rdma qpair is always created
by the thread on acceptor_core, thus we need to
change the related I/O channel during polling if the core
configured for subsystem is not same with the acceptor core.\
With this patch, we can run NVMe-oF tgt with multiple cores,
and each subsystem can configure different core to handle.
Change-Id: I6163a871f65115e545a4f3fd9cc46b3bafb13249
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/383683
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3db00323c20786713750d13a61b1531d8b1ce7f6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/386087
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
During tasting, if bdev is already claimed, we send errors on screen.
This is expected behavior so we should send only debug logs.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic5766cfa3aed88099415991998381de69ee8b8b6
Reviewed-on: https://review.gerrithub.io/384229
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ibdfa8be770d7bfcb2baaf29fa5b32dea064ffbd0
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/383383
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
NVMe 1.2 introduced a new Identify Controller field, RTD3E ("RTD3 Entry
Latency"), which allows the device to report the expected time for a
normal shutdown. Use this as the timeout for the shutdown process when
available instead of hard-coding 5 seconds.
Change-Id: I14e7223c81ba397771cf00b49f034f25d21b6e82
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/385301
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_pci_device_claim() can be used to ensure only one process
at a time uses any given PCI device. Previously this was only
used in the bdev_nvme driver - other apps like nvme/perf do
not use spdk_pci_device_claim() and could effectively rip out
the device from a running bdev-based app like the NVMe-oF target.
So instead of modifying all of the nvme apps, put this logic into
the core nvme driver instead so that all applications get the
benefit transparently. Save the fd when the controller is constructed
and then close it when the controller is destructed to handle the
detach (including hotplug) cases.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5dc48a2e41dc06707800f15a9e1f9141477628c6
Reviewed-on: https://review.gerrithub.io/385524
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows users of this interface to then close the fd
when they want to release the claim.
This prepares for calling spdk_pci_device_claim() in the
nvme driver to cover not just the bdev_nvme driver but all
of our nvme example and test applications as well. We'll
want the fd returned so that we can properly close it during
detach (including hotplug) use cases.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b149cc4e778ba31c0e7045b858c8a1561b6b7af
Reviewed-on: https://review.gerrithub.io/385523
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the default config file does not exist, keep the
app's config_file options field as NULL, so that the
app code will not fail when trying to open a non-existent
file.
Also leverage the recent iSCSI and NVMe-oF refactoring,
to just skip trying to read config file parameters if no
config file exists (or the requisite section in the config
file is not present). vhost already handled this so it did
not need to be modified.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic32f0a7a8ce85322a8effd537b62d14732d7b82e
Reviewed-on: https://review.gerrithub.io/385497
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously users would have to pass CHAP and Mutual as
separate words on the DiscoveryAuthMethod line - but
this was problematic since then we would have to check
that the user did not specify Mutual without CHAP.
So instead just make Mutual infer CHAP.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I183d59145abb97198984541157522d6483b18e7c
Reviewed-on: https://review.gerrithub.io/385495
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Some invalid parameters would result in an immediate app exit, while
others such as DefaultTime2Wait would adjust an invalid value
rather than causing an app exit.
Instead, be consistent and just ignore any invalid values, with an
error message.
One exception is the CHAP + Mutual check - this will be fixed
in a separate patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I867e4a2a5685aec73df5e556d529b0356a9c3070
Reviewed-on: https://review.gerrithub.io/385494
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move all of the code related to reading global iSCSI
parameters to a new function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iccbb75996b29b0b7a87c602042f13aaf7935d7e1
Reviewed-on: https://review.gerrithub.io/385493
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_iscsi_app_read_parameters() does an SPDK_DEBUGLOG
for each of the global parameters - consolidate these
and move them to a separate function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If1543f9f5846420bf75f7a4aebaf540106f1df69
Reviewed-on: https://review.gerrithub.io/385492
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Modify spdk_iscsi_app_read_parameters() so that it sets
up all of the default values first, and then reads the
config file to update any parameters that may have been
specified.
This is in preparation for breaking out the config file
reading into a separate function that can be skipped
if no config file is available. In this case it will just
use the defaults.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0b9026ea87d171be22085a6baca24e2022cb58dd
Reviewed-on: https://review.gerrithub.io/385491
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_iscsi_tgt_node_access() (in lib/iscsi/tgt_node.c) regards
empty netmask of IG as ALL (allow all initiator's IP address).
However any user cannot create IG whose netmask is empty by both
JSON-RPC and config file. Instead user can create IG whose
netmask is ALL.
The code to regard empty netmask of IG as ALL never run in production.
Hence delete the code and add UT to confirm the fix.
Change-Id: Ib7206d0986db9093cfb6b36191be26293ff6c67a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/382920
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Group the code fragments of add/delete name and mask of initiators
and create spdk_iscsi_init_grp_add/delete_initiators/netmasks()
functions. Memory alloc/free is done in these functions.
Change-Id: I40f2873c5336a05813c0e34797c109386eda4229
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381246
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
This function is not used and there is already similar one.
Hence delete this function.
Change-Id: Iff290c4762cf5da7211382e367e5b137ab8fbf7d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381245
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
FirstBurstLength, MaxBurstLength and MaxRecvDataSegmentLength
cannot be configured, so there is no need to keep global data
members for these parameters - just use the default #defines
instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4b47e00a5594da8ec0b87192be4a23c4a2145bde
Reviewed-on: https://review.gerrithub.io/385490
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Our iSCSI target does not support disabling InitialR2T,
DataPDUInOrder and DataSequenceInOrder, and will fail
if someone tries to disable them in the config file.
So instead, just do not support these parameters at all.
This simplifies the code and reduces confusion.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icf1e01a6d12b758404769f77aa3f6221e6e3ee0d
Reviewed-on: https://review.gerrithub.io/385489
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This was not used anywhere - sessions default to
DEFAULT_MAXOUTSTANDINGR2T and never look at the global
MaxOutstandingR2T value.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia4874d8d747063f729061124194b60d15ad3ddac
Reviewed-on: https://review.gerrithub.io/385488
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I2077dab7b343e662bdcfd5681b4850c258f0431f
Reviewed-on: https://review.gerrithub.io/385406
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I65e84971f2d55f27b0c0c1a1b226fc4da4b3cf89
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/382763
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Modified the above files to add rpc support to update NVMe firmware. Currently,
the path parameter must be local to the RPC Server.
Change-Id: I2b14e37792a2f0a5759e8b13e21137e7f346e58e
Signed-off-by: Isaac Otsiabah <iotsiabah@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/369083
Reviewed-by: Paul von Stamwitz <pvonstamwitz@us.fujitsu.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As part of the SCSI target scan, request the Block Thin Provisioning VPD
page to determine if the target device supports Unmap, and report it via
the io_type_supported bdev callback.
Change-Id: Id2fdaf3a2cae72e6356a862d40ff772f9d12d144
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/384131
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
This prepares for adding more steps to the scanning phase. Each step
will put its results into the scan info struct, and the final
alloc_virtio_disk() call will copy the info to the allocated disk at the
end of each target scan.
Change-Id: I836ada42e25c817bb1998328cb592acac25be08d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/384130
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ic6770371d9d62cbdd40ae0612eb4f7dceccd507f
Reviewed-on: https://review.gerrithub.io/383771
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ifbb02f99cd2e5752b2bc9091733b87ddadec11a4
Reviewed-on: https://review.gerrithub.io/383895
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some devices expect alloc_len
to be the same as payload len.
Kernel vhost-scsi reports:
Expected Transfer Length: 256 does
not match SCSI CDB Length: 255 for
SAM Opcode: 0x12.
Change-Id: I499290c207b77be6757441da002f9fcc9eebcecd
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/383779
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Scan requests will be re-sent
if non-critical failure has
happened.
This is actually required, as
some Virtio SCSI devices require
a dummy request to clear it's
POWER ON OCCURED unit attention
status after Virtio device init.
The very first request might fail
with asc = 0x29 (POWER ON, RESET,
OR BUS RESET OCCURED), but
subsequent requests will be
processed correctly.
Change-Id: I809bfe7952062995078f33dccb92192d722e6574
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/383689
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1df83cbd6414a1bb8f54328c735950b9476e323b
Reviewed-on: https://review.gerrithub.io/384105
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Virtio spec say that any IRQ requests are only hints. So try to limit
number of interrupts generated by vhost by defining minimum interval
between sending IRQ. Coalescing is disabled by default. Can be enabled
using RPC command 'set_vhost_controller_coalescing'.
Change-Id: I9b96014d004ea0ea022b4498c6b47d30d867091a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/378130
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
First this change moves spdk_subsystem_fini() to trigger on
spdk_app_stop(). This ensures that spdk_subsystem_fini() is called
before reactors are stopped in spdk_reactors_stop().
Finish paths for subsystems, bdevs and copy engine is now
asynchronous.
Each of those three mentioned have to make sure they are
asynchronous as well.
Only bdev that currently has requirement for asynchronous finish
are logical volume.
Thus the change in vbdev_lvol.c making it move to next bdev module
only after all lvol stores were unloaded.
Fio_plugin finish of bdev and copy_engine was removed for now.
Next patch in series adds it back with async support.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I80ee2d084f3d82c50bf1329e08996604ae61b1b3
Reviewed-on: https://review.gerrithub.io/381536
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The *TODO* section was outdated. Most of
this README's contents have been already
moved to doc/virtio.md and doc/bdev.md.
Change-Id: I2f2108afdc543276c9f08ae053ccebdbd6b1a229
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/384054
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Inserting into g_spdk_lvol_pairs list is done in vbdev_lvs_create_cb,
at that point it is known that it can be used. Meanwhile removing
was done at start of _vbdev_lvs_remove, to prevent possibility to
access it when waiting for destruct callback to complete.
This made checking if the g_spdk_lvol_pairs list is empty unreliable
to detect if all lvs were destroyed - they could still be being
processed and callback not yet called.
This patch removes lvs from global list only after the callback of
_vbdev_lvs_remove is called.
It will be used in future patch during asynchronous
finish of vbdev module to determine when all lvs were removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I638fe63a80b3cf00e9773f5a8c7be315d2c05555
Reviewed-on: https://review.gerrithub.io/382986
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To avoid code duplication those two functions were merged.
New _vbdev_lvs_remove function deals with differences by
additional argument "destroy".
No functional difference should be observed after this patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I09067646ec9b9656f361077c54906a618e4e0c48
Reviewed-on: https://review.gerrithub.io/383908
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch adds new API to remove logical volume store
from device it is on. It is only used from RPC, when
user explicitly requests. It allows to use the device to
use as any other bdev.
vbdev_lvs_unload() is now only called from hotremove and
during application shutdown. Which makes it possible to
load it again during application start up.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If6452ecc3fff99237d1704ff7cd8de4d7133221d
Reviewed-on: https://review.gerrithub.io/382021
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the bdev doesn't support unmap, we should not send unmap I/O.
Instead, use spdk_bdev_write_zeroes(), which has a fallback in the bdev
layer for devices that don't natively support it.
Change-Id: I1bd05d3518716f8e60501dbb4f9da0fee23cf7c2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383491
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There is a scenario where we can try do unload or remove
lvol store while lvol present on that lvol store is being
closed or destroyed.
Scenario:
1. send delete_bdev rpc command
2. command returns before lvol is actually closed/destroyed
(does not wait for callback)
3. send destroy_lvol_store rpc command
4. lvs is destroyed before lvol is destroyed
5. lvol destroy callback is called on destroeyd lvol store
Aboive scenario can be reproduced using:
spdk/test/vhost/spdk_vhost.sh --integrity-lvol-scsi
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie715279195bd4b1145cf05d4f5a8477b4fac87f7
Reviewed-on: https://review.gerrithub.io/383595
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently deleting bdev does not support asynchronous delete
operations. Because of that results are returned before device
is actually deleted and some operation can be peformed on that
device after removal of this device started.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I305c302d8abd5d7c2c0f947fca70c58396872132
Reviewed-on: https://review.gerrithub.io/383732
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It used to be NULL.
Fixes: a85a4452
("bdev_virtio/rpc: add construct_virtio_user_scsi_bdev")
Change-Id: I490b41571e5667cf95b59b2e316006d1ef7381e8
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/383892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I59cbef4ce1bfe8af113c66c2c9cb9f208440c0aa
Reviewed-on: https://review.gerrithub.io/383887
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make sure the recv() can't write beyond the end of the msg buffer.
Change-Id: Ibc4bb51ac3a1c2a027a458d59356b7a5496eca7e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383646
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Use the correct size types (rather than int) for values passed to and
returned from recv().
Change-Id: I2d38eed63e2d9c9f056d1053e156088fd361c88b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383645
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Add a name to each lvol which is persisted as a blob
xattr. lvol names must be unique within its
lvolstore.
While here, fix a few lvol_ut issues that were caught
as part of testing the lvol unique names. Also fix
a couple of tests that registered the wrong string
name with CUnit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6d24d241e8f52158d14886f928d41823bbc93fa9
Reviewed-on: https://review.gerrithub.io/383567
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There are some upcoming changes which will deprecate
the old lvsuuid_blobid name in favor of an
lvs_name/lvol_name name where these names are
user-specified.
In preparation for this change, rename the previous
lvol->name to lvol->old_name. This will allow us
to add a new lvol->name but keep the original
old_name during the transition.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I10deb219097fa8726c146ab2427ee7373933b97d
Reviewed-on: https://review.gerrithub.io/383534
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Each lvolstore now has a unique name which is persisted to
metadata. Eventually this will provide a friendlier
way to reference logical volumes, in the form
lvolstore_name/lvol_name.
This patch only covers the unique lvolstore name. An
lvolstore may not be created nor loaded if its name
conflicts with an already loaded blobstore.
Currently there is no way to rename an lvolstore to
resolve a conflict. This will be coming in the future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I842f13b79776e5b8f81e56de10778c35328e8cd3
Reviewed-on: https://review.gerrithub.io/383533
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix up the two existing instances of trailing whitespace in text files,
and add a check to enforce that no new trailing whitespace is added.
Change-Id: I2197bed69bb356142aa6d2e4e8261c7434dd358b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383291
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Replace POSIX and standard C #includes with the central SPDK stdinc.h
and remove the rte_virtio exclusion from header checking in
scripts/check_format.sh
Change-Id: Ie53d11de7cd9a51c59957e3c500bd8b9b4c4bc5e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383003
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove the exclusion of the rte_virtio code from scripts/check_format.sh
since we will be maintaining this code going forward (unlike rte_vhost,
which we intend to keep up to date with upstream DPDK).
Change-Id: I30c186e566ca777dff552a36af53443d197a8824
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383002
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If an I/O fails during the write zeroes fallback to write on a split
I/O, the previous code would call spdk_bdev_io_complete() again on the
same I/O, causing infinite recursion.
Fix this by restoring the original user callback before completing the
I/O, as well as using _spdk_bdev_io_complete() rather than
spdk_bdev_io_complete() to avoid double-counting the statistics.
This also preserves the original bdev_io->status code set by the module,
rather than always setting it to SPDK_BDEV_IO_STATUS_FAILED.
Change-Id: Ib71fa6e54eed3d5823652971f7c439e0ff236fc1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383506
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
This patch is a continuation of patch https://review.gerrithub.io/#/c/383252/
on which this series should be rebased. This series introduces
spdk_lvol_open function where reference counter should be also used.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I962db95eaba34c7c18e639076ad86696e8209196
Reviewed-on: https://review.gerrithub.io/383264
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
If we don't delete the super blob, this blob structure
will leak.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I56d0ca4884846aee0c7865f9c600d6c43811373c
Reviewed-on: https://review.gerrithub.io/383311
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
This will be used in a future patch to ensure we do not
allow creating or loading an lvolstore with a names that
matches an already opened lvolstore.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I37e8786f91cd578dd36fbec99ca23609419fc8f8
Reviewed-on: https://review.gerrithub.io/383012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently this is just a free(), but a future patch will
also remove spdk_lvol_stores from a common list.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iff0f14fbe2003448d24f6fb1484f0e95acfe90ff
Reviewed-on: https://review.gerrithub.io/383011
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch introduces lvol store and lvols parameters saving
on persistent memories and loading it from saved data on app start.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia63f0cf3d6365d59f31c5f0a1724636bfe73b5b8
Reviewed-on: https://review.gerrithub.io/375764
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The vhost connection can be closed
concurrently from 2 places:
* the connection thread itself
* rte_vhost_driver_unregister
The connection thread will terminate
the connection if any recv error
occured. The unregister function
will terminate the connection
together with the thread.
However, there is no sychronization
between those two. The connection
thread runs in the background
without any mutex.
The rte_vhost_driver_unregister
now signals the connection thread
to terminate itself and waits
until it's killed.
Change-Id: I012e97ebb8a79edcb2c17c28b2fc7e8041bf92b3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/383085
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
pci_dump_json_config() is used for both legacy and modern PCI virtio
devices, so move it out of the #ifdef PCI_LEGACY_SUPPORT so it is
available when building against older DPDK versions.
Change-Id: I986f9e6a81abda64d77f954b15807d06e35d1748
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383487
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
It is possible that a user will call spdk_bs_unload() with blobs
list not-empty. Instead of just asserting that, now the call fails
with appropriate error.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I83818453d6c90ff9b5bf657c90e12b2f9d5ca013
Reviewed-on: https://review.gerrithub.io/383220
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
17.05-rc4 is the version e.g.
rte_pci_ioport_read function was
introduced in. The bdev_virtio
module previously did not compile
with older DPDK versions.
Change-Id: Ib96d5d7934166acc552515b02bfba25b71929438
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382829
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This was looking at req, but req had already been allocated and checked
for NULl previously; this line was intended to be checking lvol_req.
Change-Id: I8603d35fb4582c109e9d02f4964bbd6d21735324
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383312
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Casting pointers without checking their length could
potentially lead to a crash
Change-Id: I7c61e5818ecfbf32bb363858965503341353c51e
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/382420
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Unmap does not guarantee that erased blocks will return all zeroes.
using write_zeroes when unmapping metadata gives the
desired behavior for a blob.
Only metadata pages will be cleared with write_zeroes in this patch;
blob data clusters will still call unmap. This behavior may be made
configurable in a later patch (to allow the user to request zeroing of
clusters rather than just unmapping).
Change-Id: I1b210abac110867ce703bcfdeb634eb45aa9d5c9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372004
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
if write_zeroes is not supported by the block device, we can get the
same behavior by simply writing a buffer full of zeroes to the blocks
we want to erase. I also incorporate splitting into the bdev layer to
accomodate large i/o.
Change-Id: I8fa1bfaaf22d7bfc6e3afb6e89d22fa9f7767e55
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/373829
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is necessary to avoid failing very large write_zeroes operations.
This is the minimal workaround to get the current bdevio tests to pass -
the real fix will be implemented in the bdev layer later.
Change-Id: I4e49f1b4da5d4c7f9507757d6c71ba3880d22437
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/383306
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There is no need to wait until an atexit() to unlink these - we can do it immediately
since the open refs will still be valid.
Note: changed the remove() calls to unlink() to be more precise, since these are
files and not directories.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib160131bcf3beb9783c6fc4de021f64c43c943a9
Reviewed-on: https://review.gerrithub.io/382697
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
This goes along with previous patch in series.
Adding functionality to remove logical volume store from
device.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6338a35ed02838498a3cd9bb2dddd25803e65f79
Reviewed-on: https://review.gerrithub.io/382020
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently exposed API allows to load/unload and to
initialize blobstore on a device.
A spdk_bs_destroy() call is added in order to reach
functional parity with spdk_bs_init(). It was not
possible to remove blobstore from device from within
SPDK previously.
spdk_bs_destroy() takes blobstore pointer as argument
(instead of bs_dev), because blobstore has to be already
loaded to destroy it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2c493a4407868fcf08fd1766a19fc8463f634ef5
Reviewed-on: https://review.gerrithub.io/382019
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3a86f28056e67b3c237441fb1048ca6ccd081ae7
Reviewed-on: https://review.gerrithub.io/383252
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Close and destroy lvol functions should support callback
functions so that they can be processed sequentially
and also give user result.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I9e87fb281916c65c17b2b7e54e91228844962048
Reviewed-on: https://review.gerrithub.io/383230
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK can now be compiled without
the virtio driver.
Change-Id: I92999c871d28875d519749a73a7f2230c3881fbe
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382828
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We only sync the metadata and data in the runtime of blobstore, which
means we only update the used md bitmap and used clusters bitmap in memory.
if the system crushed, we have no chance to sync the used md bitmap and
used clusters bitmap into disk, then next time when we try to load the
blobstore, all the data will lost, this patch add the logic to recover the
valid data from last dirty shutdown. We will go through all the metadata pages
to find all valid data and rebuild them.
Change-Id: Ieb7c5f932206b1b68fdde0cee35f2d2cb3a4f309
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/376470
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A recent patch did some refactoring on how the superblock is
written out - it introduced a bug where on load we would
write out INVALID for super_blob id and a null bstype when
clearing the clean bit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1d6256e35030645b3e8fda83bfe0f74aeb635733
Reviewed-on: https://review.gerrithub.io/383129
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some future patches will require specifying an lvol_store
name when calling spdk_lvs_init(). This means that passing
NULL for spdk_lvs_opts will no longer be an option. So
add an spdk_lvs_opts_init() (similar to spdk_bs_opts_init)
which will initialize a default value for the cluster size.
While here, prepend an underscore to spdk_setup_lvs_opts, since
this function is not part of the public SPDK API.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I155bcfd0c396017304bb3d58b7511ada71dade17
Reviewed-on: https://review.gerrithub.io/383030
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
init_grp.c has init_grp_destroy() function but does not have
init_grp_create() function. Hence add init_grp_create() function.
init_grp_create() function check duplication of init groups.
Change-Id: I49c64254846ae4edd7a0bb2cf3250fb6f53239f4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381243
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We interpeted max request queue
count as number of all queues.
It did not take into account
eventq and controlq.
This patch also fixes overall
max_queues negotiation for
modern PCI devices.
Fixes 8b0a4a3 ("bdev_virtio: implement multiqueue")
Change-Id: I834cb973772ca5946ac26d18bd3eeb2783f48ea9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382816
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
It was wrongly assumed that
each READ will contain at least
one iovec. This could potentially
corrupt the desc array.
Change-Id: I48ca7efbe4bea897e0ad16184452bddcf3daf49b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/383009
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Only the initial xmit_pkt is checked
against an error, the subsequent
xmits are just asserted. As scan
messages are sent 1-by-1 if the first
request (containing 3 iovectors) has
been enqueued successfully so should
the next ones.
Change-Id: Ie102256a42ef1c67132d606af90ab96771adba10
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382784
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In case of not enough free descriptors
the bdev_virtio will fail the I/O with
NOMEM status.
Change-Id: I1cb0cd5453ff70468898bc8e414b53b9c64dbe50
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382783
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Previously all bdevs were using
hardcoded name Virtio0.
Change-Id: Ib990027a0edd4e200aa4b6f4689ccb9e0824a9c3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382926
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This doesn't change any behavior
as queue_idx was always either
0 or -1, but makes it clear that
this function always returns
-1 on error. This is required
by current io_channel implementation.
Change-Id: I2b613ab9ff1e48d5b4aee0cd499bbc0a04cb765c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382927
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Always start bdev pollers on the calling core.
This removes the lcore concept from the bdev poller abstraction and
simplifies the job of spdk_bdev_initialize() callers providing their own
poller and event implementations.
All callers except the NVMe bdev hotplug poller already used the current
core as the parameter. The NVMe HotplugPollCore option was undocumented
and unused in any of the tests or example configuration files, so it
should be safe to remove.
Change-Id: I93b466e1e58901b8785c40cbe296fa46c157850f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382857
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A single thread that initialized
bdev_virtio subsystem will be used
to poll control queues for all
virtio devices.
Every io_channel will put it's e.g.
RESET requests to the controlq MP-SC
spdk_ring. The controlq poller will
dequeue these requests and put them
into the virtio queue. The same
poller will then poll for completions
and send them to proper threads
that submitted given requests.
Change-Id: I90ae7c5d76dc89cc52ff69cf2a60e27a9314557c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added a wrapper for rte_ring_count().
Change-Id: Ia12fde3f250604a0f801309ed1c4706a311e7896
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382919
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some error messages were printed
outside of the error-checking
if() condition.
Fixes: bd273d4 ("rte_vhost: replace strerror() with spdk_strerror_r()")
Change-Id: Icf965ae56ffc2e0970572308b38607ac63cdb1f2
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382943
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Our previous implementation makes the buffer allocation
in an unfair way and this patch can solve this issue.
With this patch, we can use limited buffer to support
high I/O depth.
Change-Id: I0e7a073c0b4539090218aa461d50620287bb4b63
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/382528
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Values from previous bdev_ios
were reused and were taken into
account e.g. in bdev_io_get_buf()
to check if a buffer is already
assigned.
Change-Id: I239aaf83a4ce8a9342c1820e3ac9e9ccf6a28336
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382959
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9218b618544def301a4509eda1b266390a80dba5
Reviewed-on: https://review.gerrithub.io/382830
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add newlines to the debug logs.
Also dump the mismatched bstype via SPDK_TRACEDUMP() rather than as a
string, since it may not be null terminated.
Change-Id: Icad567373c56f24aea550903a1370c3734465472
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382855
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Previously, spdk_trace_dump() took a const uint8_t * as the buffer, but
it is more flexible to allow any type to be passed (we are just going to
interpret it as an array of bytes anyway).
Change-Id: I1750316928cd330ed461bb513ff8af37e0170ef3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382854
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Rather than using char arrays to represent blobstore types, just use the
publicly-defined struct spdk_bs_type.
Change-Id: I8bbfd95085e16f9d53106c176038e067ff1266d7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382853
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These #defines are not currently used, and they have equivalents already
defined in spdk/pci_ids.h:
VIRTIO_PCI_VENDORID == SPDK_PCI_VID_VIRTIO
VIRTIO_PCI_DEVICEID_SCSI_MODERN == PCI_DEVICE_ID_VIRTIO_SCSI_MODERN
Change-Id: I0016ab0a26f4aa7ff4a5ee10f66da867b590e0e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382734
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
strerror() is potentially not thread safe; use the thread-safe SPDK
wrapper instead.
Change-Id: I5f6f4b0b19a0298b07f71f05aee4574e8b21f5fa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382732
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch also introduces
vq->poller_ctx. It will be later
reused for per-virtqueue task pools
to allow multiple threads using
the same virtqueue.
Since at the time of scanning there
is no I/O traffic, this field is
now being used to keep scan base
pointer. It has to be freed if an
initialization error occurs.
Change-Id: Ia54ee6c8402d38218dc811b4994761105d17269a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382199
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is required for virtio-initiator,
where multiple io_channels have to
share the same virtio queue. A single
poller will receive responses from
a virtio queue and send the completions
to the thread that submitted bdev_io.
Change-Id: I951c7655aaa17d41a680d437661afff27d2c3077
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382200
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The get_lvol_stores RPC had typos in the free_blocks and total_blocks
fields (they were named "free_num_blocks" and "total_num_blocks", which
didn't match the names of the actual variables).
Change-Id: Ib66b04ec2f0c272048a826bfa59338db1d028e34
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382522
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I85ce977183be4de9efacb66637e7895f22f58508
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382521
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows the caller to know which bdev module is exporting the bdev
and therefore how to interpret the driver_specific fields.
Change-Id: I09641645875827eabc0a831fff5b0b5bed6b03d0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382519
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Each virtqueue will now contain
it's own buffer for I/O tasks.
Some of the task struct fields
are now the same across subsequent
I/Os, so they can be now set
just once - at the vdev start/stop.
This simplifies the code, the
debugging process and also introduces
additional sanity check preventing
vhost from processing two requests
with the same id at the same time.
Change-Id: Idcf388e8bf7c92e5536199c35eb0eb6339c00d84
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/369114
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This enable storing SPDK specific stuff per queue. First use of
this will be event index feature.
Change-Id: Ieca6fa47a6f2e23bec73d2cda8b0ed8b9185bd28
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/376636
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Introducing bstype as a way to identify and verify
blobstore type.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I50267b5408625be10fe0c146ae329016d5509b4a
Reviewed-on: https://review.gerrithub.io/380476
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The virtio bdev should only attempt to issue SBC commands if the SCSI
device is a block device.
Change-Id: Ib29edbd19f9f34bdafe5ea3f7085c57537134625
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382714
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The SCSI spec defines two separate fields within the first byte of
the Inquiry data. Define them as bitfields and add enum values for the
peripheral qualifier field.
Change-Id: Ibbb158338da199fc1b67b04c52ec91633577c571
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382713
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
the function of spdk_iscsi_find_init_grp() is duplicated with
of spdk_iscsi_init_grp_find_by_tag(). The later one should be kept.
Hence delete former one.
Change-Id: I8d397648bd400550445de49c8a7731f0932f5324
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381244
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6d3669bc19b51fd72af7ea27aa4d2a88dee59e58
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382509
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove some magic numbers from the code.
Change-Id: I494d57331888dd03f0bbff1f6beeac46139d7e96
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382348
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Virtqueues now have to be "acquired"
by a logical CPU core in order to
perform any traffic on them. The
acquire mechanism is thread-safe to
prevent two reactors accessing the
same virtqueue at the same time.
For now a single virtqueue
may be used by only one io_channel.
Support for shared virtqueues will
be implemented in future.
Added new param "Queues" to the
virtio config file for VirtioUser
bdevs. VirtioPci will use the
max available queues num -
negotiated during QEMU startup.
Change-Id: I3fd4b9d8c470f26ca9b84838b3c64de6f9e48300
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377337
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replaced old PMD_*LOG with
* SPDK_WARNLOG
* SPDK_ERRLOG
* SPDK_DEBUGLOG
Added 3 new trace flags:
* virtio_dev - SPDK_TRACE_VIRTIO_DEV
* virtio_pci - SPDK_TRACE_VIRTIO_PCI
* virtio_user - SPDK_TRACE_VIRTIO_USER
This patch also makes error
messages to be printed on
non-debug builds. Some messages
should be still reworded, but
that will be done in a separate
patch.
Change-Id: I2dd4c71dfce20cde0ef010a1d91ac6f166bb2c98
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382620
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Moved their contents to virtio_dev
files. virtio_queue was already deeply
connected with virtio_dev. There's
no need to keep them separate.
Change-Id: I540c04eb954fe0618817c020f9453aebf3d98ba9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382619
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Simplified some code.
Change-Id: I9fc42da93a4c2df3714775d73508de118a5e6b1a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382618
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Documentation of rte_eal_init() lie. At least two parameters (huge-dir
and file-prefix) are held and used internally trought the lifetime of
application.
Change-Id: Ie418b5f2b0d7fbea5c217e47a555a520d3256360
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/382677
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously two spdk_events were allocated in spdk_app_start().
Now app allocated spdk_event for function to be called after
initialization is complete. Meanwhile subsystem allocates
its own spdk_event.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4822f76d30cc2f7b95a86a4ffbfc61b80c0a903e
Reviewed-on: https://review.gerrithub.io/382673
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_lvol_destroy() and spdk_lvol_close() behave very similar to
each other. With exception that spdk_lvol_destroy() deletes blob,
after closing the blob.
The order of calls in spdk_lvol_destroy() case:
- spdk_lvo_destroy() calls spdk_bs_md_close_blob()
- _spdk_lvol_delete_blob_cb is callback from closing the blob,
which calls spdk_bs_md_delete_blob()
- _spdk_lvol_close_blob_cb is callback from deleting the blob
The order of calls in spdk_lvol_close() case:
- spdk_lvo_close() calls spdk_bs_md_close_blob()
- _spdk_lvol_close_blob_cb is callback from closing the blob
Lvol was removed from lvol store lvol list in two cases,
spdk_lvol_destroy() and _spdk_lvol_close_blob_cb().
This caused lvol to be removed twice from the list in
lvol destroy case.
This change makes it so it is more clear, that lvol is removed
from lvol store lvol list in both cases and just once.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I204645850ca2c46f03a9035518b00f50c75e2b1a
Reviewed-on: https://review.gerrithub.io/382425
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Similar to blobstore unload, lib/lvol assumes that unloading
lvol store is only possible after no lvols on it are open.
Before spdk_lvs_unload() is possible, for each lvol
on that lvol store spdk_lvol_close() or spdk_lvol_destroy()
has to be called.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I86bae67ec322a61fdc0045d799854eecd1f36407
Reviewed-on: https://review.gerrithub.io/382252
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Several fields in struct virtio_user_dev are not referenced anywhere (a
few have cleanup code but no other assignments); remove them.
Also drop is_vhost_user_by_type() and virtio_user_handle_cq(), which
aren't used anywhere.
Change-Id: I7c80ccbadbd5263a2886dc9028108b898d6485ae
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382505
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
These are just noise, since we don't enable the unused parameter
warning.
Also remove an unused variable, txvq, in virtio_dev_start() that
had been left behind since it was marked as __rte_unused.
Change-Id: I7bda85ef5f2208dd36d8f1806d8241a04b893123
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382494
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
These were included under #ifdef RTE_EXEC_ENV_LINUXAPP, which is not
defined in the SPDK build system, so they were already not getting
included.
Change-Id: I6b90c8230632647bb9237f86ec52c09133891a2d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382488
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Replace the DPDK rte_branch_prediction.h likely/unlikely with
spdk/likely.h spdk_likely/spdk_unlikely.
Change-Id: I51ad42ee2b29b8f33436fa960deda67a0dd0b0f0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382486
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Clarify some error messages
and simplify the code.
Change-Id: I586ea55a1d9fa10142d4a9d469b62f1b83076cd5
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381925
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function was only useful for old (and incorrect) iSCSI
topology with SPDK. Hence this function can be removed.
Change-Id: I6147382b0731a896df3c988fae0173923a9a85fc
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381242
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
These are identical now that the spdk_bdev_io I/O-specific unions were
combined.
Change-Id: I2579f4fd100c5ebb3550b806c7fdac38c6160a69
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382373
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the normal case, we can avoid re-adding it into
pending data buf list if there is no buffer.
Change-Id: I400e3c6c60bb1d1df13782faf2dd32ca2bd897a3
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/382402
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: If809fe808150498c7ad6797855fda3097e3b0c84
Reviewed-on: https://review.gerrithub.io/382470
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch reduce duplicate data structure and make some functions common
for both bs load and unload porcess in the future.
Change-Id: I40b2135e89a705aa5073c1ded4c7b28be4b32f6e
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/381912
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Three new RPC are added, that allow to control pmem pool file.
- create_pmem_pool(path to file, total file size, block size)
- pmem_pool_info(path to file)
- delete_pmem_pool(path to file)
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id9025b7d988608957700b41f74874159d18c6ad3
Reviewed-on: https://review.gerrithub.io/379006
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Remove one use of DPDK-specific functions in the virtio initiator code.
Change-Id: I538185270da83674e937dac64c9b1130fab36ac4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382074
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
This is required for adding
optional params for vdevs.
Since virtio-initiator README.md
had to be changed, some outdated
entries from TODO section has
been removed as a part of this
patch as well.
Change-Id: I472a966d8e4166305fb19ad3ab20e53289a1e071
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382347
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I68a56666d30a550de4a2dc5a66fb669dfbad12dd
Reviewed-on: https://review.gerrithub.io/379659
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Current implementation supports only adding port to scsi_dev.
This change is required to support dynamic remapping of portals.
Change-Id: Idce49aeae43c8861ebe2807df853694f7bacf884
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379931
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some problems with indirect descriptors shown. Disable it for now to
have time to investigate it.
Change-Id: I8c6cfff94dc2159ab01f72986a8ae7d42c353e8b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/382301
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The construct_malloc_bdev RPC method now takes an optional "name"
parameter to request a specific name for the created bdev, rather than
using the auto-generated Malloc%d-style name.
scripts/rpc.py is updated to add the new optional parameter, and it uses
-b/--name to match the corresponding parameter to construct_nvme_bdev.
Also update one of the test scripts to use the new parameter to get test
coverage.
Change-Id: I1f5bf76f406b8ea8a709d856f7624a38fbfa0d5f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/381728
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change it from error_log to debug_log level to
avoid missleading while there does not have
GPT_PROTECTIVE_MBR type.
Change-Id: I51f7bf2994db227b4c9f1bf80d3bb0e05c047e59
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/382080
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For using SoftRoce, there will be packets loss,
so we need to use this value for re-transmission.
retry_count means the maximum number of times that
a data transfer operation should be retried on the
connection when an error occurs.
Change-Id: Ibd81a33d3838bbdf0c054f01666e7ec59bb0a38f
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/382079
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_opened field in spdk_bdev structure is no longer required.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie4a368425b11b1c2e1a3a48b5858857b3935498b
Reviewed-on: https://review.gerrithub.io/381375
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Idd19b8be38a843dfd50710c09d0c6c31773c2f0c
Reviewed-on: https://review.gerrithub.io/380014
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia6b6e5352ce4da04784fb0a3ea1efd0552650067
Reviewed-on: https://review.gerrithub.io/381548
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fixed typos, updated comments and
simplified the code.
Change-Id: I7eaa7227518d376d86cd4a6eb0348f1efc7b47fd
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382024
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In multiprocess applications some shared memory files are left around
after a primary process exits because they can be used by secondary
processes to init memory. However, all primary dpdk processes create
these folders so we need to delete them after a single process spdk
application exits.
Change-Id: If51be95811fb66632316ae260762e5291641b537
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/381721
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is needed for proper IO channel allocation failure handling.
Change-Id: I795e5bcce5296a52c119d2300974b8cb3fc0d576
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/381187
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Closing the framework has to go through all subsystems
without failure, so return codes are unnecessary.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I53c9b4df12d2357e641130869f398b18637e6ff7
Reviewed-on: https://review.gerrithub.io/381681
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_app_fini() changed to void, as no operation within it
can fail with meaningful return code.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If77cbf745a8e3fcba4ea24411aa1816f3910cde7
Reviewed-on: https://review.gerrithub.io/381537
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The task was being aborted before
setting it's free_cb. This
results in i.e. not allowing
vhost device to stop it's pollers,
as it would endlessly wait for
this task to finish.
Change-Id: I0de2d1f21da109db1045e433c07f153316e09997
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381866
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Every descriptor may now contain
a separate descriptor table.
This increases the maximum number
of concurrent IO in a virtqueue
from about (vq->size / 3) to
(vq->size * SPDK_VHOST_IOVS_MAX).
Knowing that SPDK_VHOST_IOVS_MAX
is 128, and assuming that vq->size
is 128 (current hardcoded limit
for QEMU), this gives us over 16k
concurrent possible iovectors
on the fly
Change-Id: I0853d80f6f90d53f8774231972b430a5bf05460e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/373703
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also squashed function has_next_desc
into get_next_desc to simplify the
code.
We can't just mask indexes with
(desc_table_size - 1), since in
indirect descriptors case
desc_table_size might not be a
power of 2.
Change-Id: I8053b0e37c553548d76c7a9cfe6b4dbc11c28cfc
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/373744
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
It was en empty function before.
Also, don't stop the device in
virtio_user_dev_uninit, the device
is stopped separately before
removing (unititializing) it.
Change-Id: Ib540ee4a55bd3f983b50f35a138c1690daba1d98
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379156
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch also resets each device
before destructing it. This is urgently
required for virtio_pci, as it notifies
the QEMU about our shutdown.
This patch fixes running subsequent
bdev_virtio instances in PCI mode within
the same vhost.
Change-Id: I2569251362f2aaf058f6e44f068b280244bd38c1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
With this new API, callers can attach one specific ctrlr identified by
the transport ID directly along with optional ctrlr opts. If connecting
to multiple controllers, it is still suggested to use spdk_nvme_probe()
and filter the requested controllers with the probe callback.
Two primary use cases:
1) connecting to the NVMe-oF discovery controller
2) more straightforward way to connect a specific controller (avoiding
the probe callback)
A typical usage of this API with specific ctrlr_opts:
1. struct spdk_nvme_ctrlr_opts user_opts = {}
2. Call spdk_nvme_ctrlr_get_default_ctrlr_opts(&user_opts, sizeof(user_opts))
3. Modify the content of the initialized user_opts with user required value like
user_opts.num_io_queues = 8
4. Call spdk_nvme_connect(&trid, &user_opts, sizeof(user_opts))
Change-Id: Idf67ee5966f6753918c12604342c892d2f3bbe3a
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/370634
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This change is relating to add a new public API spdk_nvme_connect() under
include/spdk/nvme.h. This new spdk_nvme_connect() API will connect the user
specified trid and have a user optional ctlr opts. Rename this API and make
it as public.
A typical usage of this API as following:
1. struct spdk_nvme_ctrlr_opts user_opts = {}
2. Call spdk_nvme_ctrlr_get_default_ctrlr_opts(&user_opts, sizeof(user_opts))
3. Modify the content of the initialized user_opts with user required value like
user_opts.num_io_queues = 8
4. Call spdk_nvme_connect(&trid, &user_opts, sizeof(user_opts))
Change-Id: Ideec8247365ebf7dd15069e29821be8ea27b08be
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380849
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
With current SPDK_BDEV_LARGE_BUF_MAX_SIZE
set to 65536, we can allocate at most
4095 16-byte SCSI UNMAP block descriptors.
A single descriptor can UNMAP up to 4GB.
That gives us a hard limit of ~16 terabytes
of data that can be unmmapped by a single
request.
The same limit is also enforced by the
SCSI standard, as the entire UNMAP request
length must be smaller than 65536.
Change-Id: I4d91fa60fd28133a058b87e88a1a14ce662a659a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381447
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
A single timeout error message is printed on the
screen already, so the user knows about the
timeout. Instead of aborting the app here, wait
endlessly for the event to complete. User
can kill the app any time if he wants to.
Change-Id: Ie1853e27b277d654a8e1099866d120f7a51638ba
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381075
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
One instance of strerror() was introduced after the spdk_strerror_r()
function was introduced in commit 4d43844f4d. Replace it with the
thread-safe version.
Change-Id: I83c6702f7965044ef5fa3577175f89a13dad833f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/381601
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move local copy of linux header code
to internal include/linux directory.
Change-Id: I81049ff956c72bb32c099a3087cf5f43de911ce4
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381275
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We don't support PPC.
Since the code around is changing
let's remove it.
To keep the codebase small.
It's so huge already.
Change-Id: I86b15ae9f6de7b9e612542c8e846aa11047e282a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381624
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Moved virtio backend specific code out
of common feature negotiation path.
virtio-pci features are stored in PCI
register. Before feature negotiation
they can be considered device (host)
features. They have to be negotiated
with local features and written back
into the very same register.
For virtio-user, the situation is a
bit different - vhost-user protocol
contains two feature-related commands
GET_FEATURES and SET_FEATURES. While
SET_ sends already negotiated features,
GET_ always returns device (host)
features.
Previously, we used to store native
device (host) features in local
variables to (ineptly) make the
negotiation path the same for
virtio-pci and virtio-user.
Instead of fixing this functionality,
it has been removed. Now, the
vtpci->get_features might be either
negotiated or not. This is now stated
in this function's doc.
This solution doesn't have any
drawbacks and simplifies the code.
Change-Id: I270e9cad8baaeae61b58992ee06e9069eac10aaf
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381472
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added vtpci_init/deinit() that set up
vtpci_internal for given virtio device.
This patch allows having multiple
devices with different vtpci_ops.
Change-Id: I249999cc24073b3de032db194730f496badd0f38
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381311
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
A few foundational change to support safe removal of portal.
- global login poller -> login poller per portal
- Caching portal data for active connection
Change-Id: I62f4d90c9ac11a433ad47421b2b0c69bfc3c70b7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379930
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Check duplication of registration of portals by using a global
portal list
Change-Id: I608fc9bd4473c11e69686e6474892f3f4272cd53
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379929
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Group the code fragments of open/close portal procedure
and create spdk_iscsi_portal_open/close() function.
Change-Id: Id6e291f3f6e5a926f3ea0d01741a200fa64db81b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379934
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function was only useful for old (and incorrect) iSCSI topology.
Hence this function can be removed.
Change-Id: I1898f6a5fbffd27a55904a55cd137dafbbdf5946
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381241
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
When constructing a SCSI device, LUN 0 must be assigned to some LUN.
However, the current code was assuming that LUN 0 had to be in the first
array element of lun_id_list in spdk_scsi_dev_construct(). Combined
with the scripts/rpc.py implementation that uses a Python (unordered)
dictionary object to generate the lun_ids array, there could be cases
where LUN 0 exists in the list but isn't first.
Fix the check by allowing LUN 0 in any position of the lun_id_list
array.
Change-Id: I39f387ec238fcecca8d2d786d3d42c42a4790637
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/381611
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This change allows for spdk_app_stop() to be executed on a DPDK lcore
instead outside of DPDK lcore range.
This is preparation for SPDK asynchronous finish, to assure
calling spdk_app_stop() from master core.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iedc878346c74296b105f93507b2c858aedfbf16e
Reviewed-on: https://review.gerrithub.io/381535
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Poller registered at the end of spdk_rpc_subsystem_setup() was
never unregistered.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id24e88a76798ba3f739614e5e357877e0404f9e4
Reviewed-on: https://review.gerrithub.io/381534
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The newly added UT code will exercise the cases that opts_size is
smaller and equal to the current version of spdk_nvme_io_qpair_opts.
This is for the backward compatibilty when SPDK components are built
as the shared library later.
Change-Id: Ic906d765f5b638070e3d9c8e38827577c625b679
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380893
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In preparation to replace them with
standard functions. As these macros
are used to assign values as well,
changing them to functions is done
in a separate patch as a part of
reworking vtpci init/deinit.
Change-Id: I4f6398342b06dc9036afece3f902506e9b72a301
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381310
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We don't support it. It's not
negotiated by SPDK vhost so the
code worked so far.
Change-Id: Ibc515dcc1ebffc6936ee7f5465c4c73001e9b1ed
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381274
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Functionality of resizing logical volumes is currently
a work in progress, thus it is disabled in this patch.
It is no longer possible to use RPC and lib functionality.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I518e7196096f52e3ad9e91d658e1bb6c3301b688
Reviewed-on: https://review.gerrithub.io/380916
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently there is no way to know total space availible on lvol store or
how much is left after creating lvol bdevs.
Four new fields should were added to get_lvol_stores:
- total number of blocks
- number of free blocks left
- block size (currently always 4096, but should be known to user)
- cluster size
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I93dec2d4b2843f0ee51dc9883c8451cf55353f7b
Reviewed-on: https://review.gerrithub.io/381131
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fixes github issue #29.
Because of how we handle the blobid and pagenum in blobstore,
it was possible to have blobstore inadvertently open the wrong
blob if open is provided a blobid where the lower 32 bits match
an existing blob but the upper 32 are clear.
Patch does the following:
- removes assert() that caught this on MD load and replace with
an error given that this condition can be induced via the API
- cleanup of pagenum and blobid conversion/handling to make it
clearer how they're related and converted
- new UTs that would have failed w/o the new check in place
Change-Id: I2b49b237922b3b8cfc4df296f5bc20195e41dc41
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/380872
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new parameter for the default ctrlr opts initialization.
This is to make sure future compatibility when SPDK components
are built as a shared library. User's version and SPDK's version
may be in different size.
The change here is to make sure the backward compatibility when
new fields are added in the struct spdk_nvme_ctrlr_opts.
Change-Id: Icfc9640993cb06063b825d4df5835d920dd374e5
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380846
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New optional parameter -c or --cluster_sz in construct_lvol_store() RPC,
as well as in vbdev_lvol and lvol lib API.
This parameter allows to configure cluster size of blobstore that lvol store
is build upon.
When this parameter is not specified, default of 1GiB is used.
spdk_lvs_opts struct was created to facilitate any future options when
creating lvol store.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ibfe8765ede3e78ff19c36f46043e4cec2e5c9f97
Reviewed-on: https://review.gerrithub.io/379356
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
It's not used anywhere. There's already a
vtpci->set_status(RESET) equivalent that
does the same.
Change-Id: I0f04ba094848806c647ede4be2ef77b423ead288
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379337
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This makes us open only as many descriptors as we need.
Change-Id: I2dbce218efdd37f015a0d4b250be9539373c6028
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379336
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Also add a unit test that reproduces the original issue and passes
with the one line fix.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I120d42ba7b6cfa4a2cb11e6cc08885d95316fe81
Reviewed-on: https://review.gerrithub.io/380703
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This puts responsibility on the caller to free the buffer
and do any other cleanup associated with the partition base
(for example, GPT buffer).
While here, also clean up a bunch of places where on
various failures during initialization, it would just
free the buffer instead of calling spdk_bdev_part_base_free().
The latter is required to make sure the bdev descriptor
gets closed as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic000339459eca4a4a1d103da2e1f3feffe7e764f
Reviewed-on: https://review.gerrithub.io/378653
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
At very high queue depths, bdev modules may not have enough
internal resources to track all of the incoming I/O. For example,
we allocate a finite number of nvme_request objects per allocated
queue pair. Currently if these resources are exhausted, the
bdev module will return failure (with no indication why) which
gets propagated all the way back to the application.
So instead, add SPDK_BDEV_IO_STATUS_NOMEM to allow bdev modules
to indicate this type of failure. Also add handling for this
status type in the generic bdev layer, involving queuing these
I/O for later retry after other I/O on the failing channel have
completed.
This does place an expectation on the bdev module that these
internal resources are allocated per io_channel. Otherwise we
cannot guarantee forward progress solely on reception of
completions. For example, without this guarantee, a bdev
module could theoretically return ENOMEM even if there were
no I/O oustanding for that io_channel. nvme, aio, rbd,
virtio and null drivers comply with this expectation already.
malloc only complies though when not using copy offload.
This patch will fix malloc w/ copy engine to at least
return ENOMEM when no copy descriptors are available. If the
condition above occurs, I/O waiting for resources will get
failed as part of a subsequent reset which matches the
behavior it has today.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iea7cd51a611af8abe882794d0b2361fdbb74e84e
Reviewed-on: https://review.gerrithub.io/378853
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Use SPDK bdev subsystem to allow basic IO to pmem pool
using pmemblk_* calls.
New pmem bdev can be constructed using RPC call
construct_pmem_bdev PMEM_FILE
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If5ca94161fe53644b8fccd3b77de5479da1b2e55
Reviewed-on: https://review.gerrithub.io/376973
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A few small tweaks to make this function easier to read:
- Return void (the return value is always 0 and never used)
- Split out Fabrics/admin queue processing 'if' block
- Remove unnecessary switch on status (it can only be 2 values)
Additionally, simplify the I/O command checking logic: we don't need to
check for CC.EN = 1, because it is only possible for I/O queues to be
created after CC.EN is set to 1.
Change-Id: Ib4c39a6e0d9e28912dbb0f0737fd223be0a80207
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/379218
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
virtio_dev can now be freed via virtio_dev_deinit.
While here, also rename virtio_init_device to
virtio_dev_init for name consistency.
This patch also adds some error-checking.
Change-Id: Ic1222756b8686fbd8a14d8631f25525249529e1d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379335
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added virtio_hw->pci_bar[6] to store information
about mapped memory regions. They have to be
stored to make it possible to unmap them.
The unmapping itself is done in a separate
patch.
Change-Id: I5dcffd0674e855a02086b3d8e4adc5fac451229a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/380779
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Generic virtio_dev has the same field already.
The field was previously used to store vhost-user
GET_QUEUE_NUM response, that will be later assigned
to virtio_dev->max_queues via virtio_user_read_dev_config.
This patch removes virtio_user_dev->max_queues
with entire virtio_user_read_dev_config functionality
for virtio_user.
Change-Id: I508f728215a95cf977d6b0b20350fcf2ae11fe3a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379155
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replaced direct DPDK calls with SPDK env/pci
equivalents. This patch also makes the PCI scan
happen only conditionally when user has
configured proper field in the bdev_virtio config
file.
Change-Id: Ib6ad81d0b421b20ad0cd9d02cb40b2213af823e6
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379489
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The same condition is already checked
in spdk_bdev_free_io().
Change-Id: I31f937036d3835e2d16633c6338ebca1a2237de9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379722
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A device without LUNs can't be used at all,
so remove it automatically
Change-Id: Iefea73916c83dfddf0229bbfac5dacb23590d920
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371299
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
A random host ID is generated per SPDK application startup if the user
doesn't specify a host ID during controller startup.
This also changes the default host NQN for NVMe-oF connections to a
random UUID NQN based on the host ID.
Change-Id: Ib0f70dd63e53087716842b412a1f134a9991d4da
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/380528
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Also updated docs.
Change-Id: I2e53c31b2c9c575d8adea23ed92f113e69f324ed
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/380490
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Current UNMAP implementation supports only
up to 2^32-1 unmapped blocks per request.
Change-Id: Ib473831fa32aaba465f76694afad71137288a73a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377688
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is required for upcoming UNMAP implementation.
Change-Id: I81fb744e0813121cebd64aa60a03a80bfbecc94d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377421
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is required for upcoming UNMAP
implementation in bdev_virtio.
While here, also added documentation for
spdk_bdev_io_get_buf().
Change-Id: Ia769ee9b8b132f31208ae66598b29a1c9ed37312
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379721
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
A vdev can change between the time the event
is enqueued and executed on proper reactor.
To detect this case, the event callback
was looking up vdev with the same name and
comparing it with old vdev pointer (from
the enqueue). This is now being simplified,
by looking up the current vdev just by
it's ID.
Change-Id: I33de03809b9d56840dd99caa8ccdf190a631ef31
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/380647
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This makes the async event body non-blocking
and also fixes potential deadlock scenario:
* call_external_event() enqueues vhost_event
* destroy_device() locks g_spdk_vhost_mutex
* destroy_device() enqueues it's vhost_event
* reactor dequeues events
* cb from call_external_event is dequeued first
* g_spdk_vhost_mutex is locked (deadlock)
* destroy_device() times out, abort()
Change-Id: If8f51ada3ee5c47ba126f74187a40a285c001c77
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/380634
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_bdev_unmap_blocks() accepts a 64-bit number of blocks, which can
exceed the NVMe Dataset Management range's 32-bit number of blocks,
which can represent up to 2 TB with 512-byte blocks.
We can support up to 0.5 PB unmap requests by using the maximum number
of descriptors in a single Dataset Management command, which should be
sufficient for now.
Change-Id: I0a4ee77a9be148355991e1a081007ffa020a3ee5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/379202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds hotremove support of lvol base bdev
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I04dc7a0cc73fd6959824873f354d5c7db8c09a9b
Reviewed-on: https://review.gerrithub.io/379348
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is in preparation for enabling hot remove of logical volumes when
their underlying blobstore device is hot-removed.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I310a3f64f0de5d628609c20a1a3b4d38df0755aa
Reviewed-on: https://review.gerrithub.io/377041
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously incorrectly it was assumed that cluster size
was always to be 1MiB. For most evident example of this
please see spdk_lvol_create() sz > free_clusters comparison.
This is now fixed and lvol->sz was changed to lvol->cluster_num.
It was done to increase readability - only dealing with
number of clusters when creating or resizing lvol.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If8cdbad18978319e57b6952dbf5a55d56785f108
Reviewed-on: https://review.gerrithub.io/380467
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch allows unmap bdev_io to
be used with spdk_bdev_io_get_buf.
bdev_io->iovs/iovcnt has been zeroed-out for other
I/O types to overwrite any previous values/pointers.
Change-Id: I570a4d82d9e4db6630a6831b1aab3259fb46cdd8
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377687
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Three checks are added to options passed to spdk_bs_init,
with appropriate errors returned:
- whether any of the options is set to 0
- device size has to be bigger than cluster size
- pages reserved for metadata exceed total number of clusters
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idee3c194b653e737ec7c7a768f1973ff72452c5b
Reviewed-on: https://review.gerrithub.io/379676
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Now bs_dev is destroyed only in two instances:
- within spdk_bs_init() on failure path
- vbdev_lvs_create() if spdk_lvs_init() errors out,
before even calling spdk_bs_init()
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7b8af39fbe83907b0c47797f0f55ca3b941729d9
Reviewed-on: https://review.gerrithub.io/379848
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ic094c34f1dc9063f12df80d77b2c70ebae9a4977
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/380066
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes condition where blobstore was prematurely calling the
application callback on spdk_bs_unload(), if the application
tries to do something too quickly bad things happen.
To avoid application changes with how the g_devlist_mutex is
held, it is no longer held while calling
_spdk_io_device_attempt_free() because the app unload CB is
called from that function and may want to call
spdk_io_device_unregister() from its unload CB. So the lock
is now held and releases strictly around the list its
protecting which allows the CB from _spdk_io_device_attempt_free()
to be called without issue.
Change-Id: Ib451cfe6b33ea0c3f9e66c86785316f9d88837c7
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/377872
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This reverts commit d3828a23ec.
GitHub issue #202 reports that this causes a crash with two or more
iSCSI connections on the same LUN.
Change-Id: I9ffb85d393eb506aac9d176299a3b3bcf021a38c
Reviewed-on: https://review.gerrithub.io/379866
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I46d564523ea20bc7c79a3896dfb024d3d5172a93
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/379911
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia07efcdec742d6ae5339e9f1c860ab58107d9f85
Signed-off-by: Jin Tsai <caijin11331007@gmail.com>
Reviewed-on: https://review.gerrithub.io/379928
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Until now we queued all IO to hardcoded
SCSI target 0.
Change-Id: Iefb229899725f53f26e927c4fb23e8d1d613c187
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379840
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
replaced "remove_vhost_scsi_controller" and "remove_vhost_blk_controller"
with "remove_vhost_controller".
Change-Id: I6f4b180054c13f25aae992e9be50375d3750a376
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/377197
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_module_init_done could be called
multiple times when more than device
is available.
Change-Id: I17ee63a818945359648953c4f8f67678d10e8907
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379864
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added new struct virtio_driver together
with it's global instance. The struct should
keep all bdev_virtio related information.
Change-Id: If78967c68c4131c89cd86cb4b46f5f0194bca323
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379863
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch only adds the pci_virtio.c file,
without changing any functionality. This
is required for future rte_virtio migration
to SPDK.
Change-Id: I7774cdfdaf8934fde588e25b5db5dd86a9cbfb3f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379484
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A mid-step towards porting virtio_pci to
use SPDK env/pci layer. See the next patch
for details.
Change-Id: Ia7cb417415bce686c3a888f949853834ddf6c7a6
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379488
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK env/pci layer does not provide equivalent
call to actually map all pci resources. This
patch will smooth future transition of rte_virtio
to SPDK.
Change-Id: I7a67c46a99824be83875385703dd6bbf0ec9645e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/380001
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New functions for reading/writing any length of data.
Also simplified specific 8/16/32-bit reads/writes.
Change-Id: I518cdb3ce8d27a25353e80f2e7ca21162b0bd12b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379487
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixed memleak on vbdev_gpt_read_gpt failure.
gpt_base->ch was never freed.
Change-Id: I97f6e433b26ab95253eac4753b68083f3433547b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377913
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad98baef576fe3d843967d0c02e9922dfc347830
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378675
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This code was still using an old paradigm of returning the
number of bytes associated with a successful submission.
Just return 0 on success instead - if caller needs the
number of bytes for some reason they have the information
to get it.
While here, return an appropriate negated errno where possible -
we especially want ENOMEM returned when an ioat channel runs out
of descriptors.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5858ccd6cff916b6c80fda7d2c9fce96fb39ef89
Reviewed-on: https://review.gerrithub.io/378858
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some of the internal functions used to return the
number of bytes associated with a successfully submitted
IO, but that was changed a while ago to just return 0
for success.
So change some of the callers of these functions to
just look for != 0 for failure rather than < 0. This
preps for some upcoming ENOMEM handling changes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0a66dd6bfac9053e0fd6103dee1ea36b20d902df
Reviewed-on: https://review.gerrithub.io/378856
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I374910a7d5ecf0125228d0c99ab523804956ca78
Reviewed-on: https://review.gerrithub.io/378852
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch introduces per-channel flags to keep state of information
needed in the primary I/O path. Setting/clearing of these flags
should only done through an spdk_for_each_channel() call. Currently
there is only a RESET_IN_PROGRESS flag defined but more may be added
in the future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia81817e2dabc9997c12beebae72fb129cb5dcf9a
Reviewed-on: https://review.gerrithub.io/377828
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This was removed in NVMe 1.2.1 ECN 002.
Change-Id: Icacd53c1f33043cf1c9f30bff1fb9dce1efa69b3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378681
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The Logout Request reason field is the low 7 bits of byte byte 1; the
last bit of byte 1 is specified to be always 1, and we shouldn't
consider it to be part of the reason field.
The existing debug print code was parsing the reason field correctly (by
masking it against 0x7f), but it's simpler to just make the reason field
into a bitfield of the proper size; this fixes the real bug in the
reqh->reason != 0 check, which did not use the 0x7f mask.
Fixes GitHub issue #198.
Change-Id: I4813da2236c70dc1761e303b34d321750ee36626
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378658
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It does not seem nessecary to include it, when this it used just once
in lvol disk creation.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I42ead55329f0ac7e55bb73702d071f118a5c7931
Reviewed-on: https://review.gerrithub.io/379678
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
To increase readability, union in spdk_lvol_store_req is now split
into four separate structures.
As well spdk_bdev from lvs_basic/spdk_lvs_req was removed as it was
not needed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I65c5155f3d15151a97cf8f8e425b26aa1966b677
Reviewed-on: https://review.gerrithub.io/379169
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ife45dc8e27d767b9f09b67e7fae3b94837a14491
Reviewed-on: https://review.gerrithub.io/379458
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Now that the bdev_io read and write branches of the union have been
unified, the virtio-scsi bdev I/O code can be simplified a little bit.
Change-Id: Iadbe55862770a1b0e7f854b724a70d94c704218e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/379696
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, we naively assumed that a completed
reset was the reset in progress, and would
unilaterally set reset_in_progres to false.
So change reset_in_progress to a bdev_io pointer
instead. If this is not NULL, a reset is not in
progress. Then when a reset completes, we only
set the reset_in_progress pointer to NULL if we
are completing the reset that is in progress.
We also were not aborting queued resets when
destroying a channel so that is fixed here too.
The added unit test covers both fixes above - it will
submit two resets on a different channels, then destroy
the second channel. This will abort the second reset
and check that the bdev still sees the first reset as in
progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61df677cfa272c589ca03cb81753f71b0807a182
Reviewed-on: https://review.gerrithub.io/378199
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Upper layers are not supposed to put an I/O channel if there
are still I/O outstanding. This should apply to resets as well.
To better detect this case, do not remove the reset from
the channel's queued_reset list until it is ready to be
submitted to the bdev module. This ensures:
1) We can detect if a channel is put with a reset outstanding.
2) We do not access freed memory, when the channel is destroyed
before the reset message can submit the reset I/O.
3) Abort the queued reset if a channel is destroyed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c03eee8b3642155c19c2996e25955baac22d406
Reviewed-on: https://review.gerrithub.io/378198
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This provides an alternate path for submitting
resets to a bdev module, in preparation for some
future patches where we will want to avoid
reset-specific checks in the main I/O submission
path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I833c01cc33940771b4265f963cfb9de61c5f1faf
Reviewed-on: https://review.gerrithub.io/378670
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We will use this typedef for some additional use
cases where are not specific to the need_buf
functionality.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8d18c7ac037ab4b0ba612f308b9ca38538d112b1
Reviewed-on: https://review.gerrithub.io/378197
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
io_device and their channels are created after _spdk_bs_alloc finishes.
Until they are, only free() is required on allocated bs structure.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie00126cdaa2bb5cd77cad2dec89d670734367b49
Reviewed-on: https://review.gerrithub.io/379675
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Defer writing RPC response until after the device has been hotremoved.
Change-Id: I052280b205415e4a2ffa1421653cc49b8e3b1445
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371119
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Devices can be added to a SCSI
vhost controller at any time now.
Change-Id: Ic5dd4b78465d3431479e0389b7ea902e1e25c337
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371281
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This simplifies eventq API greatly. Since vhost supports only a single
LUN per device, lun parameter in eventq isn't required for now.
Change-Id: I1c41a3f509aca96f2de8de6563a3cac5c4dd1b8b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371118
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Since we are calling eventq_enqueue only from inside of the controller
reactor, such ring is not needed. Eventq events will now be sent
immediately. This simplifies the whole process greatly.
The abstract vhost event layer is being replaced with much simpler and
less error-prone vhost external spdk_event API.
This reverts commit 542b5415 [1] together with vhost scsi device
hot-attach feature. Hot-attach shall be reintroduced in upcoming
patches.
[1] 542b541588 ("vhost_scsi: implemented abstract vhost event layer")
Change-Id: I39a427332d573c4e0be548d1c8caf0cf2858f6a5
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371117
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Since all direct bdev_io types have the same layout,
there is no need to keep them differentiated.
Change-Id: If8bb85e43c9922c0ebfc39837e3a45006e508b56
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377686
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Added READ CAPACITY (10) support.
This is a work towards supporting both (10) and
(16)-bit SCSI commands.
If READ CAPACITY (10) returns 0xFFFFFFFF as max lba,
a READ CAPACITY (16) is sent.
As specified in SBC-3 5.10.2 READ CAPACITY (10):
```
If the number of logical blocks exceeds the maximum value that is able
to be specified in the RETURNED LOGICAL BLOCK ADDRESS field, the device
server shall set the RETURNED LOGICAL BLOCK ADDRESS field to FFFFFFFFh.
The application client should then issue a READ CAPACITY (16) command
(see 3.27) to retrieve the READ CAPACITY (16) parameter data.
```
Change-Id: If82bc45e904e91d95b124724e895350098337ae9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377091
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added separate function for allocating virtio_scsi_disk.
This is required for the upcoming 10-bit SCSI command
support changes.
Change-Id: Ib60bfe003f37d796387944b04494baf2a77a6558
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379422
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch also sets virtio_dev->modern for vhost-user
devices.
A word of explanation of what's happening now:
For virtio_pci, dev->modern is set when reading config,
as legacy devices have no Virtio PCI Capability in their
capability list. For virtio_user, the dev->modern should
be set if VIRTIO_F_VERSION_1 feature has been negotiated.
Change-Id: I056b1dcf65a5a6a87cda6499771399befdc59cb5
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377090
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Moved negotiation to virtio_init_device.
This patch also cleans up feature negotiation a bit.
Change-Id: Ia67e8d694a5acebcbe37679a657d68d6c46979db
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377089
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9e550a879b50af0de476583f5efd4e0518667662
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/379213
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK already uses DEFAULT_IO_QUEUE_SIZE and MQES to decide the correct
queue depth of NVMe queue pair, hardcoded it to NVME_IO_ENTRIES(512)
does not make sense if users want to set queue depth bigger than 512.
Change-Id: Iaa73fc79e055292ae9bd19af0c8c12f257ae5c46
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/379052
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use SGL with contiguous physical buffer metadata as the default PSDT
if NVMe can support SGL.
Change-Id: I99192a8b5408f1b034d5112d77d13639b7558f01
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/378699
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A channel may have been deleted between when a message was sent to
a thread and when it gets executed on that thread. So we must look
for the channel when the messages gets executed - if it's not found,
just continue to the next thread(s).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib7e596f11f287c6be521ba729d33378f0a825c7e
Reviewed-on: https://review.gerrithub.io/378002
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This restriction causes bdevs examination/discovery to fail
when there are asynchronous operations. We should remove this
limitation for now. Future plan is to implement approach
similar to the one that is present in kernel.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibe5572297672022412d25a4a835dc9527ce97f3e
Reviewed-on: https://review.gerrithub.io/378758
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Script for testing vhost using lvols as backends for
virtual machines. Option for using nested lvol stores and
nested lvol bdevs also provided.
Change-Id: Iad8a196c97f292881a8b424b4433ec281f12aec6
Signed-off-by: Lukasz <lukaszx.galka@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/365798
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
FFFFFFFFh is reserved for the broadcast NSID and can't be used as a
NSID for a specific namespace.
Change-Id: I64a3cc80993d7b34324823462f4d992d1415773f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378849
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will be used to simulate multi-threading for
bdev unit tests.
While here, alphabetize the existing calls - calloc
had been inserted out of order in a couple of places.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I559cd1fd79e78f03ebdac313e0bbedbcdde4a8c1
Reviewed-on: https://review.gerrithub.io/377968
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is the final set of command processing functions (admin and I/O
commands were already handled in ctrlr.c), and it allows us to clean up
the ctrlr.c API some more.
Change-Id: Ic73c56c44d7fd64bfaa72b6f5f6f0984b4dfa053
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378018
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Combine nvmf_process_connect() into spdk_nvmf_ctrlr_connect() to
simplify the logic and keep it all together in one function.
This also allows us to move the invalid connect helper function and
macros back out of the header into a static function in one file.
Change-Id: Ia3bd80d0309392520d51bf8f5830d3f23332c5e3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378016
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
These are not used in the current code.
We introduced the concept of a subsystem ID to prepare for a future
scaling strategy, but the poll group scaling strategy turns out to
not need subsystem IDs.
Change-Id: Ibd27cc0d446c7cda34db76787e1e9c233c399f44
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378015
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This moves the subsystem->ctrlrs list management fully into the
subsystem code, which will help simplify thread safety considerations
once we start adding locks.
Change-Id: Ibc118923f1bd520f1e524cde5d45ccfcc69aee1e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376025
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Previously we made cntlid globally unique as part of
a strategy for scaling connections that never panned
out. Now, we have a new strategy and don't need cntlid
to be globally unique, so relax the restrictions
and simplify the code.
Change-Id: I167772f5e7d37183715bf9967b0102529144bb2b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376250
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe-oF 1.0 spec says:
"The NVM subsystem shall not allocate a Controller ID in the range FFF0h
to FFFFh as a valid Controller ID"
Change-Id: If0b7dc4948e40b3bdf370a1da97199a25d362e71
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376247
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Avoid having to look up transports during discovery later.
Change-Id: I0207a822f05b02de4798d3e966603c073ea14062
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/377991
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch shows UUID and base bdev for logical volume stores
when get_lvol_stores() RPC is called.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idbd0bc6c4a0334e5af8d4a674a203ddb2270f3e4
Reviewed-on: https://review.gerrithub.io/374604
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch add support crc for metadata pages, we will also
add crc for supper block, used md and used clusters bitmask
pages in the following patches.
Change-Id: Ie36fcc16b39296d06721f1f8eb5689260194c558
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/377901
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Mark the file as deleted in the function spdk_fs_delete_file()
when the referance is not 0, and delete the file when it is closed,
make the behaviour as "unlink".
Change-Id: Ia934bb73c82c48fdbab79dbe4b56296a73abc01e
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/374944
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously virtio_hw was managing both VirtIO PCI and
vhost-user devices. Now's there virtio_dev, a common
part for both backends. virtio_hw is only used for PCI.
Note that this patch does not introduce another
abstraction layer. It only unifies an already existing
one. Previously virtio_user_dev was built on top of
virtio_hw, with most PCI fields just hanging there
unused. Now both, virtio_user_dev and virtio_hw are
built on top of virtio_dev.
Change-Id: Ida25defc0063055a81cf4039c9b85470b9880bc3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/376966
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch removes unnecessary if (hw->virtio_user_dev)
conditions. It also makes vq_ring_mem explicitly
a physical address. There's already a separate
vq_ring_virt_mem field that's used for vhost-user.
Change-Id: Ie8d97458744b4e3ae9d0e3d72b28d29f19179706
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/376965
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
All rte_virtio filenames have virtio_ prefix now.
Change-Id: I42018624606d68997a0e982e7b622d6a23e3c190
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/376624
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Used vhost external event API to call RPC commands on
controller's reactor. RPC call get_vhost_scsi_controllers
has been left unchanged as it requires special *foreach*
external event API. See next patches for details.
Change-Id: I1fd77c9af2606bbcea45cd0089015dd890b6e328
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371279
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Controller creation RPC can't be done on controller's reactor
(as there's obviously no controller yet...), so a special
set of vhost_mutex_lock/unlock() functions to has been added
to synchronise controller creation with the rest of
ctrlr-enumerating code.
Change-Id: Ib6e4b894a85ff1f70ebd047832c5a3568a00f1a7
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377651
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Continuation of patch 94afad5a [1].
That function could be called from outside of the vhost reactor,
causing data races and possible segfaults.
Now, after this patch, all ctrlr-changing functions take spdk_vhost_dev
parameter, meaning they should be called via external event API [1],
which soon will be the only way of obtaining spdk_vhost_dev pointer.
[1] 94afad5a ("vhost: added external API to call spdk_events on vdev reactor")
Change-Id: I40ea66ad09fb5c433dd897a4e22aedeb423f9b4b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371013
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Added spdk_vhost_dev_backend_event_done function
that sets the return code for the callback and
transparently calls sem_post.
Change-Id: Iba27af780cd1753056c1607177c945e13c95c712
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377585
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ia96ae78ff9530d953181ac5f7255a38f3c8ec430
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Reviewed-on: https://review.gerrithub.io/375392
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I743f5e4d1c24ad5ef9f1fef4c2678e347b179a9f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/377260
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes it easier to unit test the individual functions and also
easier to follow the logic.
These helpers will also be used in the upcoming Write Zeroes function.
Also cleans up the variable names to be consistent with the rest of the
code.
Change-Id: I69847b6a052fb7baff058ed8e5b79904ddf2ec6d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/377259
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes: 5f6306ea24 ("bdev/gpt: free base bdev_part in gpt after
examining")
Change-Id: Ia9cd64127f435b1b40f6a34b6e5166b329924ed6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378652
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch also fixes segfault on startup when using
a PCI device as a DPDK secondary process.
Change-Id: I93116ae207649fae2fb3461d32d04a98cecb4cf6
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/376622
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Don't allow enqueueing a request when not
enough free descriptors are available.
While here, also clarify some other
vq_desc_tail_idx code.
Change-Id: Ibcec2e31b2f609f2fd71f2426ce1a91728ed82f6
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/378154
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This was broken by commit 157969b60e.
However, this change doesn't fix any errors.
Neither vq->vq_free_cnt nor dxp->ndescs are used at the moment,
but this will change with future patches.
Fixes: 157969b60e ("bdev_virtio: added virtio_scsi_io_ctx")
Change-Id: I215d437c52f7060bf631bd193e7e59e2a4710368
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/378116
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This ensures that we don't run out of free descriptors
and queue entries.
Change-Id: I3c6960564032ffce6e6b6bf887e8c5e12fdf3205
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/378153
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
bdev_virtio I/O poller used to interfere with scan poller.
e.g. GPT read could be picked up by scan poller.
Even if such request is instantly rejected, this would cause
both GPT and scan to fail. Instead, defer bdev_register
until after the virtio_hw scan has finished.
I/O poller logic will still have to be greatly refactored to
add proper multiqueue/multibdev support. However, this patch
lifts scan processing responsibility from any I/O pollers.
Change-Id: I201de8aa0dc1db71ed836fd5e74d55604950f271
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/378064
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently GPT keeps the bdev it is examining open, even after determining there is no GPT on it.
It is due to spdk_gpt_base_free() not notifying bdev layer to free base bdev_part.
Additionally release of bdev module for that bdev was moved to bdev_part_free,
as the module is not claimed until bdev_part on base bdev are created.
Functional tests added to verify the changes.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id75f88259267847e8ec476d19750dc1e2690f11a
Reviewed-on: https://review.gerrithub.io/378621
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reported-by: Cunyin Chang <cunyin.chang@intel.com>
Change-Id: I94ec3a5f43839f1fa4379d2f275c4e19f81e1a52
Reviewed-on: https://review.gerrithub.io/378003
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The current hot plug support assumes only one thread
can access a subsystem at a time, but now that we're
changing that this will need to be reworked. In the
interest of making it easier to change the threading
model, remove hot plug support temporarily. We'll add
it back in once the threading model changes are done.
Change-Id: I15b75b402b85aa62f5ba864a64cde1de3cdb4ba3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376417
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
env.mk already detects the location of the include path (which may or
may not have 'dpdk' in the name depending on the DPDK version), so put
that into a DPDK_INC_DIR variable and use it in the libnuma check so we
find the correct rte_config.h location.
Also check if rte_config.h exists before trying to pass it to grep -
this prevents error messages when running 'make clean' using the dpdk
submodule, because the rte_config.h file is removed before the other
SPDK directories get a chance to run 'make clean'.
Change-Id: I903c9f5801c04302407b2217723466cd6883fbda
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378163
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
DPDK is now fully synchronized with the rest of vhost.
This patch also removes timed_event API from vhost_internal.h.
It should only be used internally in vhost.c under g_spdk_vhost_mutex.
Also, this patch temporarily gets rid of return codes for
vhost_scsi/blk dpdk callbacks. -1 will be returned if the
call timed out, 0 otherwise. A patch reenabling this
functionality is on the way
Change-Id: Ifd9566ceb55a3c6dbe4bac013cc3b7600c834d17
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/372687
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_nvme_ctrlr_cmd_io_raw_with_md() will be verified
on Cosmos+ OpenSSD as soon as it will support meta data.
Change-Id: Ib5f3f1f1eba66d0147a566804395bfa5ec959c2f
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/377428
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If user specify a trid, we should not attach other ctrlrs
Change-Id: I73a4278c1d7551908feb56d01a1c41c0d049bb91
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/377653
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This moves towards the ability to queue ios while
a reset is in progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibb8efbcec3931f966eb43030ea91945dfaaa5a77
Reviewed-on: https://review.gerrithub.io/377827
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some callers may not require a callback function once
the specified function has been called on all channels.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I925751d221918810c2e966640ca636482bf6f866
Reviewed-on: https://review.gerrithub.io/377859
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
First, improve packing of spdk_bdev_io. Move any
fields which must be zeroed into the first cacheline.
Also change type and status from enums (needing 4 bytes)
to int16_t which is still a far bigger range than
needed.
Next, modify spdk_bdev_get_io to only zero the
first cacheline (actually a bit less).
SPDK_BDEV_IO_TYPE_INVALID is also added, making it
explicit that 0 is an invalid value for the IO type.
Previously this was somewhat inferred.
There are still additional improvements that can
be made to this area - primarily combining
spdk_bdev_get_io() and spdk_bdev_io_init() into
a single function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1916d6d5db02c93622b9725ec1095148e3f384d8
Reviewed-on: https://review.gerrithub.io/377799
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_bdev_io_submit() always returns 0, so the return
value is unnecessary. This eliminates a slew of checks
on that return value.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I493ecefc7b72d3b3a44bd92df70bd5c653453ff0
Reviewed-on: https://review.gerrithub.io/377627
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We no longer support resubmitting an existing I/O to
a lower bdev. This enables accurate tracking of I/O
at each bdev layer for purposes of reset handling and
QoS.
__submit_request() in bdev.c is now only called
from spdk_bdev_io_submit(), so just collapse these
two functions together while we are here.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1b46df42b1a6476f9dbd8c61dd3380dbd145315d
Reviewed-on: https://review.gerrithub.io/377626
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This follows similar recent changes to bdev/split.
Future patches will move quite a bit of duplicated
code between these modules to a set of helper functions,
so doing this renaming will make those future patches
more clear.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic67ee03d68b3080b7083ba3d91505f0ddf06da7b
Reviewed-on: https://review.gerrithub.io/376443
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
split, gpt and error all have a lot of similar code, and
are based on the presumption of one or more "partition" bdevs
on a "base" bdev. This results in quite a bit of duplicated
code between these three bdev modules. The error bdev
module does follow this same model - it just always has only
a one-to-one mapping between the error bdev and its base bdev.
As all of the modules move to allocating their own bdev_io
rather than allowing for adjusting an existing bdev_io and
resubmitting it, there will be even more duplicated code
between these modules.
So this patch adds a set of helper functions in the common
bdev library to eliminate all of this duplicated code.
This patch also moves the split module to use it - future
patches will also convert gpt and error.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8032331b46c32da9fca18a077580ccb274c6204
Reviewed-on: https://review.gerrithub.io/376423
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This removes some functions that were only called from
one place, to reduce the number of functions that will
need to get moved to the common bdev library in a future
patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ieaaf9f1fdc907591902ce543024d547a70d00b7f
Reviewed-on: https://review.gerrithub.io/376422
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Make sure DEBUG macro is not defined while processing log macros,
otherwise DEBUG (which should be passed as is down to RTE_LOG and
concatenated with RTE_LOG_ prefix) gets substituted too early:
In file included from /spdk/dpdk/build/include/rte_debug.h:46:0,
from /spdk/dpdk/build/include/rte_pci.h:85,
from rte_virtio/virtio_dev.c:48:
rte_virtio/virtio_dev.c: In function ‘virtio_init_vring’:
/spdk/dpdk/build/include/rte_log.h:333:11: error: ‘RTE_LOG_1’ undeclared (first use in this function)
rte_log(RTE_LOG_ ## l, \
^
rte_virtio/virtio_logs.h:41:2: note: in expansion of macro ‘RTE_LOG’
RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
^
rte_virtio/virtio_logs.h:42:31: note: in expansion of macro ‘PMD_INIT_LOG’
#define PMD_INIT_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>")
^
rte_virtio/virtio_dev.c:82:2: note: in expansion of macro ‘PMD_INIT_FUNC_TRACE’
PMD_INIT_FUNC_TRACE();
While at this, change format string type specifier to the correct one.
Change-Id: I7f7bda105aa00b99bea4ea5f6a9bff268940a557
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
Reviewed-on: https://review.gerrithub.io/377945
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
I inadvertently misordered the arguments in a call to spdk_bdev_unmap.
This call is unused as of this patch, but is used by future patches.
Change-Id: I6042a3f4e05bded21b0ceb4d3b104856bcbf8c12
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/377961
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The system could crash anytime, we need sync the "clean" flag
into disk as soon as we load the blobstore. Then if the system crashed,
we will find the blobstore is not clean shutdown next time when we load
the blobstore, and we could run the recover process then.
Change-Id: I6189678e970ffe979a224e02be6cede0ee44dde8
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/376276
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Change-Id: I73cf34e0184f67a855afe980f5645df25baf4714
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/377652
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There remove callback function will remove the nvme_bdev from the global
list, we do not need to remove the device in the function bdev_nvme_destruct().
just make sure to remove it from list when the app exit.
Change-Id: I1859bfd696ed9c0ca3ac1cd8ffadfd9488df0fcd
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/375941
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reason: In our default configuration, we use
nqn.2016-06.io.spdk:init
Change-Id: Ic840b41230f53d5d97166a38faf7c2109fa6b41a
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/377463
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4e5f0694fc99e17dc405d7aa6b9e7215c63c0f52
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/377608
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The rte_malloc_socket() call just above that allocates vq is only
allocating sizeof(*vq), but the memcpy() would have tried to copy
sizeof(*vq) * 2.
This code is under #ifdef RTE_LIBRTE_VHOST_NUMA, so it was not normally
enabled with DPDK 17.05, but it breaks when DPDK 17.08 turns on libnuma
support by default.
Change-Id: I75c0c8666a9147346038d313fb419350988d8187
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/377596
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some rte_vhost files use #ifdef RTE_LIBRTE_VHOST_NUMA, but they don't
explicitly include rte_config.h, which defines this macro. Instruct
the compiler to pre-include rte_config.h in the same way DPDK's build
system does.
Change-Id: Iddde76b8c3d0956ccd5f481956cede650d858586
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/377595
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a private function that is only called in one place, and cpumask
is always provided. Additionally, the code inside the mask == NULL ||
cpumask == NULL check always writes to *cpumask, so it was not possible
to pass NULL as cpumask anyway.
Change-Id: I2cde53dfeb07edc8a8f87f4ff485ec0c5c9ba7a8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376685
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The next step towards fixing synchronization issues between RPC and
vhost controller reactor.
The general idea is to hide spdk_vhost_dev_find declaration, so that
vdev-related functions can't be (incorrectly) called from outside of
the vhost controller reactor. The vdev pointer should only be acquired
via spdk_vhost_call_external_event.
Change-Id: I689226c2271f81624b2651bae3b960b7efb1c01b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371098
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The next step towards fixing synchronization issues between RPC and
vhost controller reactor.
This patch makes changes to already present vhost timed event API
to conform it to the upcoming external spdk_events API. The timed_event
API shall be removed from headers in future. See next patch for details.
Change-Id: I31b0d7c383b39c32326daa750663ebdeb4edd562
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377584
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There's no need to keep a copy of that file.
Use system include instead.
Change-Id: I07bfb7c5de57efaa420a9fe38408c8ef230110f3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/376350
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
clang 4.0 introduced a new warning, -Waddress-of-packed-member, which
triggers on a couple of spots in NBD and NVMf. Fix them up to silence
the warnings.
Change-Id: I134618f93528ea9a3d08050c34056670a58abdab
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/377441
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users don't need to provide nvme debug flag for the error cases.
Change-Id: I00c29e2b8ab470b0233d94acec52b4bec129728c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/376708
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allows called to specify something other than stderr such as
stdout. Existing callers updated to use stderr.
Change-Id: I48a703e1474a45952878121a83c19fef1c43d630
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/377420
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I34356444b68d8310f66d7130cbdf8132b5487a94
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376258
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Change-Id: I46dea98bf762967d49867e428f8ce6b3ec881072
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376257
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The field was set, but unused. virtio_hw already has
max_queues field. Since SPDK rte_virtio does not provide
any virtqueue abstraction nb_tx_queues and it's setup
functions are not needed.
Change-Id: Ib9bbdc86e6b6cede13a6cc251331590d6985db66
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/376345
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Save us some allocations and fix
scan_target() error handling path
Change-Id: I29fe18a6e592c7fd32d0486f831f6b053f59b561
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375604
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These were duplicated in ctrlr.c and request.c; pull them into
nvmf_internal.h so there's only one copy.
Change-Id: I00d499dd17689e907c182d01e61bde075d217af8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376020
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Add new versions of all of the I/O calls that take parameters in blocks
instead of bytes. These are intended to replace the old APIs, but
we'll keep them for now to preserve compatibility.
Change-Id: I85ab665c653e8c697016c628837d49aa0c3bfcd0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376255
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
The bdev modules now take all read, write, unmap, and flush requests in
terms of blocks rather than bytes.
The public bdev APIs still accept offset and length in bytes for now.
Change-Id: I57f0955d52272f57755f0ff4dbc56721fdc2ef51
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376037
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Target enumeration now uses separate poller to receive virtio
response messages. A special virtio_scsi_scan_base struct has
been added to keep track of how many targets we still have to
receive response from.
Making target scan async allows other pollers to run while
bdev_virtio still has to wait for a response.
Change-Id: Ia9af9d61fb4f880d0535df0b18aa443fff6dc9be
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375132
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch properly closes sockets on shutdown.
Previous rte_vhost_driver_unregister calls were returning
immediately due to inexistent sockets at given paths.
Change-Id: I5e4d64f04fc8b6bef914c2eb4c4d2220be9ca9ec
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377165
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In preparation to make them static
Change-Id: I086868aa88fa4f6f9f1c24b15a2e3cd0a04caab1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377096
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removed leftover code.
spdk_vhost_timed_event struct has been stripped from
spdk_event and timeout fields. The first one was not
required since vhost_timed_events are not reusable
anymore. The latter has been removed to prepare
vhost_timed_event struct to be expanded to generic
- also non-timing out - vhost_event struct.
Change-Id: Ifd22f59b2748752f2776700676f07e70b45957ed
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377095
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Public API has been made smaller before refactoring timed_events
entirely.
Change-Id: Ie03bf5066582b6fd243229a9c8b1ceb77658dc2f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/372686
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make use of new rte_vhost API.
vdev->vid is now set via new/destroy_connection(),
new/destroy_device sets vdev->lcore.
lcore != -1 implies vid != -1, hence some lcore checks have been
replaced with vid checks.
Change-Id: I08f4932ee7e6aeb3eba4874f2e94ad407764d9c2
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/372075
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The previous behavior with an empty host NQN whitelist was to allow any
host to connect.
Change-Id: I5401e52d96642cf20afe0d50c692613e67262edf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376432
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Allow the user to set the source address when connecting to a NVMe-oF
controller.
Change-Id: Ice3add4b2cd3b64fdb8d0d7807d2235f90fd86b1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375837
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In preparations to make it asynchronous.
Change-Id: Iab651974841d83cf36b8e050e3905638f88ad992
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375729
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
bdev_virtio requires us to do SCSI inquiry for
each device and wait for a response. It currently
polls inline for this response, taking up entire
reactor exclusively. Making it async would allow
other pollers to run while bdev_virtio still has
to wait.
Change-Id: Iefc88e0a2efb5b791ffe23b2e623b7c50d759084
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375573
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added new callbacks to notify about socket connection status.
As destroy_device is used for virtqueue processing *pause* as well as
connection close, the user has no distinction between those.
Consider the following scenario:
rte_vhost: received SET_VRING_BASE message,
calling destroy_device() as usual
user: end-user asks to remove the device (together with socket file),
OK, device is not *in use* - that's NOT the behavior we want
calling rte_vhost_driver_unregister() etc.
Instead of changing new_device/destroy_device callbacks and breaking
the ABI, a set of new functions new_connection/destroy_connection
has been added.
Change-Id: I50a8ca4035045892d6c658da7df58c0c97025ec3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/372074
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the IOMMU is enabled, automatically register memory
added by the user through spdk_mem_register().
Change-Id: Ie02c7bf445314da23e2efee9de9c187ed0773a9f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375249
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Memory is now reference counted at a higher level.
Change-Id: I61b24db7b92a129686775eddbff3a48814c842fe
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375644
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This makes the separation between the vtophys map
and the generic memory map code clearer.
Change-Id: I3e8686e432a4594339008698de156d3978e9768a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375640
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Previously, if the user registered memory twice the
mem maps would get notified both times. Instead,
reference count the registrations.
Change-Id: I3f5cbf9e9320c2f4491ec8a5892c1f83cce41706
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375639
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Iffce947b4ccd13fd0747cdb9372fdb7587b1f5a2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375828
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is in preparation for needing to know if the
address is in the DPDK memsegs on unregister.
Change-Id: Ie2febecae789808ae8ae63ce6889b9bbf3a72aab
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375248
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Both the register and unregister paths did the same splitting
on 2MB boundaries, so do that first and then switch on
the action.
Change-Id: I532c42a698c2d423d3ecb48bc0d964e766cf742b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375247
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This code can't use our standard logging mechanism, but the
if DEBUG statements were making it hard to read. Add a
basic macro to clean it up.
Change-Id: I1d5c87df60d212ffe2b2455cc2169036dcb9e807
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375246
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_vtophys_register_one and spdk_vtophys_unregister_one
were both only called from one spot and are tiny functions.
Remove the extra layer of indirection for code clarity.
Change-Id: I4cf2698d6c7df7e09bfe05d786e39e1fb063a973
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375245
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function was only called from one place, so
inline it there. It's easier to follow the code
without so much jumping around.
Change-Id: I3bb11dda321af5f266d23aa32f1a79c8b361595b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375224
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For multiple db test, there will be some files not close at the end of test,
this patch make sure to close all the files before shutdown the app.
Change-Id: Ie87d9e44b55a9192a19c35c439fbf33268f8ca4c
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/375168
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_bdev_get_io_channel() already handles this.
Change-Id: I6b28fe10b86b00762ff15324fcd0a32aae94e012
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376267
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This allows the user to enable/disable getrusage() monitoring at
runtime.
Also change the log level to INFO and enable the monitoring in all
builds, not just #ifdef DEBUG.
Change-Id: I2f5c3bc8cd83dcb2a72dc7078bf2cb43aa28827c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376473
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is not a public API, so simplify the number
of internal header files where important types
are defined.
Change-Id: I115d0497d37e3cfe399c3a5b2546d20aa4fe24b4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376249
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We are still creating one poll group per controller,
so this isn't particularly useful just yet.
Change-Id: I65c54385bdba587d4b1098629727877970d39277
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376241
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_bdev_init_complete could have been called twice.
While here, also simplify bdev_initialize error path.
On allocation failure, bdev subsystem will now finish
with bdev_mgr->module_init_complete set to false.
Fixes: 7fefd60fab ("bdev: make module init synchronous again")
Change-Id: Ia4b5d571d26beb34f0e6c0f4c7b3176215eec69f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375572
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
2 locks are executed in 2 places in opposite orders.
Consider the following scenario, threads A and B:
(A)
* fdset_event_dispatch() start
* pfdentry->busy = 1; (lock #1)
* vhost_user_read_cb() start
* vhost_destroy_device() start
(B)
* rte_vhost_driver_unregister() start
* pthread_mutex_lock(&vsocket->conn_mutex); (lock #2)
* fdset_del()
* endless loop, waiting for pfdentry->busy == 0 (lock #1)
(A)
* vhost_destroy_device() end
* pthread_mutex_lock(&vsocket->conn_mutex); (lock #2)
(mutex already locked - deadlock at this point)
Thread B has locked vsocket->conn_mutex and is in while(1)
loop waiting for given fd to change it's busy flag to 0.
Thread A would have to finish vhost_user_read_cb() in order
to set busy flag back to 0, but that can't happen due to
the vsocket->conn_mutex lock.
This patch defers the fdset_del(), so that it's called outside of
vsocket->conn_mutex.
Change-Id: Ifb5d4699bdafe96a573444c11ad4eae3adc359f5
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375910
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit 6973898164.
This solution was incomplete, see the next patch which properly
fixes the deadlock issue.
Change-Id: Ib3cc609814276f1c48b05280379b8c2849ad831f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375909
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The requests are now sent using spdk_thread_send_msg
internally, so the user no longer needs to supply
these callbacks.
Change-Id: I84b0f5f0f1f6fa6eaf9a717934925d3ad802fcfd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376240
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of polling each individual qpair, polling is now
done by poll group. This allows transports to use more
efficient polling schemes in the future.
The RDMA transport as of this patch still just loops
over each qpair in the group and polls it individually,
so this patch results in no performance change yet.
Change-Id: I0f63f0dbbc5fd43c1e0d9729b10b37c2cb0d9881
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376239
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently they're entirely contained within a single
spdk_nvmf_ctrlr, which won't span devices, but this
sets the stage for a more flexible library.
Change-Id: I653f3d6fe4187f4eaf18cda0a6960040ba6952d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376238
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This prepares us to fan out I/O qpairs to other cores
Change-Id: I3e9a60226cddf3ccd26b7ad121775ee36f07e6a9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375480
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It isn't referenced directly anywhere but the unit tests, so
now we can remove it entirely.
Change-Id: I92bbf0e15ecffe2fbbdf5eecc29b6ef0e2fd5baf
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375462
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When running IOMMU enabled the user is actually
interacting with IO addresses - not physical
addresses. The value in the DPDK memseg array is
the correct one in this case, and should be used
at a higher priority than attempting to look up
the address in /proc/self/pagemap (i.e. what
rte_mem_virt2phy() does).
Further, rte_mem_virt2phy() will always fail when
running as an unprivileged user, but scanning
the memory segments will work.
Change-Id: I576e685111b7f9f848337134b7b89a3cf7c85402
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375208
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Replace SPDK_TRACE_DEBUG with component-specific flags.
Change-Id: Iee7eafab5e6ac8713f247323a18552b5afb0e86a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375834
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Everywhere this is used, we can just use
spdk_nvme_transport_id instead.
Change-Id: I407c812cd6a1ca3afcb3d1fe87c7e22183b09d7a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375461
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, move it to the appropriate compilation unit. Further,
remove use of g_nvmf_tgt.
Shift the function to a new compilation unit as well.
Change-Id: I1a43ff366532b450f00aed54a290fb9eed9bf453
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375455
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The target is accessible through the subsystem.
Change-Id: I69616df48185dbfcbe7c90ca6948457a412c6666
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375454
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This matches the name to the behavior and prepares for addition of a new
log macro for "info" log level.
Change-Id: I94ccd49face4309d3368e399528776ab140748c4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375833
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For admin commands with controller to host transfers, make sure no
uninitialized data is returned to the host. This allows us to remove a
few other memset()s in per-command handlers.
Change-Id: I00ef42945a118b6e7a0b68ab21c59fdcd21d0ee2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376024
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This moves the thread name setting code into the generic SPDK thread
setup code, so now all spdk_threads can be named, not just ones created
by the event framework.
Change-Id: I6c824cf4bcf12fe64a8e2fc7cdc2d6c949021e40
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375220
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows the user to configure an arbitrarily large number of
namespaces instead of the current hard-coded limit of 16.
Change-Id: I3a29b0de10eafd682b12c54e12411d1f9d41ce85
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375636
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Issue each I/O to the base bdev as a new discrete I/O rather
than resubmitting the original I/O. This enables some
upcoming changes to better handle queueing and reset-related
work at the generic bdev layer, which will also deprecate
the resubmit I/O logic.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic1caa89014981e948edfec5e8eaaacd41a73d49c
Reviewed-on: https://review.gerrithub.io/375495
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes it consistent it with other parts of this structure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie36488813b53ce20663c50a5c9f049c4c9723d3a
Reviewed-on: https://review.gerrithub.io/375494
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1) Change each split_disk to just point to a
split_base structure and drop the extra base_bdev
member. We can get the bdev from the split_base.
2) Simplify the names a bit for some of the members:
split_base::base_bdev to split_base::bdev and
split_disk::split_base to split_disk::base.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia8621b19ad09324d939ed43d79900fecb18291e6
Reviewed-on: https://review.gerrithub.io/375493
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
gencnt is no longer really used since there is no more
differentiation between "soft" and "hard" reset. The
original idea was that a hard reset would complete I/O
known to the bdev layer even if the underlying bdev
module had not actually completed it yet. We do not
actually support that concept, and it was a bit flawed
anyways.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa2c85bb474c7dd55eb7386d6cad5079f5edbccc
Reviewed-on: https://review.gerrithub.io/375484
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function was unnecessarily exposed in public vhost headers.
Controller-constructing functions now take string cpumask param.
Change-Id: Ie97d218c525b1dfb11cfd7e7e13c1bf702b1a58d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/373759
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id2d38779b2178ce56391ac75781c1e41e4a83e1d
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/375130
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7f9b24e5ee625ba6336a69a6c2a40498ccd6eabe
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/374399
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is useful for places that want to use the size of an NVMe
spec-defined field without having an instance of the corresponding
structure.
Specifically, we can use SPDK_NVME_CTRLR_SN_LEN to replace MAX_SN_LEN
in nvmf.h.
Change-Id: Ida3d59470cce58c0fe984601aa9e2e05cdfaa741
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375467
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use the version #defines from spdk/version.h to build a firmware version
string for the virtual NVMe-oF controller model.
Change-Id: I18285cfa75c8915a7db46d4d79c0447392bd5d8c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375252
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
I/O requests are now allocated from bdev_io memory.
virtio_req->iov now points to raw payload, request and response
iovectors are available as separate fields. This solution
should apply for both vhost-scsi and blk.
Change-Id: I588fbdd7fc5442329aadbcb3e31b2f4a7118ec8f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375264
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixed various minor bugs and removed unused code.
Change-Id: I24d3f10a494b9f9c69f45e888c7e1511adc268bc
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375004
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Certain vendors do not report correct number of queues allocated in "Set Features/Number of Queues" completion CDW0 per spec.
As a work around, issue "Get Features/Number of Queues" and rely on the value provided there.
Change-Id: Ib9cc4dcf1bdb732413becc751883a7311c6f672f
Signed-off-by: Konstantin Vyshetsky <kon.vyshetsky@stellus.com>
Reviewed-on: https://review.gerrithub.io/375234
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function accepts new connections, so use the more
traditional name.
Change-Id: Ie4aaa4b1d6da81f81fa3cd1505e5ac45e157f052
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375205
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I19d1866fb90ffd3e3543ccc66a098571ade3e3de
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375203
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, move the implementation into the appropriate
compilation unit.
Change-Id: Ie1c56bc5e077b81d744414716f9267ceaf591e49
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/375034
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The user can now specify which target they want to
search for the subsystem. Also, change the name to
spdk_nvmf_tgt_find_subsystem and put it in the correct
compilation unit.
Change-Id: I7c085959814c14d8400a0ba2572103b0814a4d0e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374879
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The user can now specify which target to create the subsystem
on.
Change-Id: I6206c0d762d59ff6312cb58d36180281baaa7266
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374878
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch delays destruction of bs_dev till after md_target io_device
is unregistered. Otherwise bs_dev would no longer exist when destroying
attached channels.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6e526e3f65f7f5bca0617888be06a5296422f8e0
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.gerrithub.io/371885
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Most of the work here revolves around having to split
an I/O that spans a cluster boundary. In this case
we need to allocate a separate iov array, and then
issue each sub-I/O serially, copying the relevant
subset of the original iov array.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0d46b3f832245900d109ee6c78cc6d49cf96428b
Reviewed-on: https://review.gerrithub.io/374880
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We use the size of a md page struct in a lot of places, use a #define
instead.
Change-Id: I522897c883bfc8b241c6da9b726d92f58faedd63
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/375040
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fail spdk_bs_init() if the dev being used has an
LBA size that is larger than a metadata page or not evenly
divisible by the size of a metadata page.
Change-Id: I0e0ca747ecd5b6039c20fb6a885382bde4527158
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/374182
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This can be used in callbacks when a user has a namespace but needs to
call controller specific functions such as alloc_io_qpair.
Change-Id: I00c931e2846e42f540c17f3254fe97a45e9bd079
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/375022
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fixes a GCC 7 warning:
rte_virtio/virtio_user/vhost_user.c: In function ‘vhost_user_setup’:
rte_virtio/virtio_user/vhost_user.c:439:46: error: ‘%s’ directive output
may be truncated writing up to 4095 bytes into a region of size 108
[-Werror=format-truncation=]
snprintf(un.sun_path, sizeof(un.sun_path), "%s", dev->path);
Change-Id: I147c9efe93cc6ce9370da6443f181f916457e3e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375198
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Supports both PCI mode (for usage in guest VMs) and
vhost-user mode (for usage in host processes). The rte_virtio
subdirectory contains a lot of code lifted from the DPDK
virtio-net driver. Most of the PCI and vhost-user code is
reused almost exactly as-is, but the virtio code is drastically
rewritten as the DPDK code was very network specific.
Has been lightly tested with both the bdevio and bdevperf
applications in both PCI and vhost-user modes.
Still quite a bit of work needed - a list of todo
items is included in a README in the module's directory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I85989d3de9ea89a87b719ececdb6d2ac16b77f53
Reviewed-on: https://review.gerrithub.io/374519
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This new function returns a reference to the target
object. This sets the library up to support multiple
targets in the future.
Change-Id: Id803dbcbb166eca33d8d5c381d9db97628606f3e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374877
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This eliminates a couple of references to g_nvmf_tgt
and sets the stage for eliminating that global entirely
in the future.
Change-Id: I068d0874cc8ba122be780e8dbd55bb1efabe10b7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374876
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The list of options is going to continue to grow, so avoid
constant API churn by adding an options struct.
Change-Id: Ie9e7248281726d4aee42b3519fcf7535ba01ee34
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374872
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now the user only sees an opaque structure.
Change-Id: Ie73b4bb0157228bbcab1b3c211d7383f881fd07e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374708
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Hide the implementation of spdk_nvmf_listener.
Change-Id: I62d46c76be0962b4246d1b7774ce8249b5baa039
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374871
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Hide the definition of spdk_nvmf_host. Add accessors
for the necessary data.
Change-Id: I28f5b8d243cb1b299724a1dd32fcf2f2bd95e1f9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374870
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch Log a message in the reactor if any context switches occur.
Change-Id: I5306a5d29bce57ee9383d3ffdc9a0f7916a5b813
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/374560
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These headers are needed on systems that have old
kernels without virtio_scsi.h and virtio_types.h.
Move them out of the vhost directory and into include
so that they can be used by an upcoming virtio-scsi
initiator bdev module.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie6614b8845568729a38665c4c1a366b97978e315
Reviewed-on: https://review.gerrithub.io/374548
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a new struct spdk_nvmf_ns to hold namespace information, and add
accessor functions so that it can be moved out of the public API in
future patches.
Change-Id: Id926aaa3cc279649057afc65e08024628edbc435
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374740
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Discovery controllers only have an admin queue.
Change-Id: I5d5a018a7df40164838a4b03f7f106a96db7e33b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374736
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that the discovery controller is using the common admin command
functions, move all of them into the common ctrlr.c file.
This also eliminates the subsystem ops, which are now just direct calls.
Change-Id: I0a25a61e0ad8742d3d76a3cacd46db4701fc7d63
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374733
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Formalize a state machine around request processing.
The state is advanced by calling
spdk_nvmf_rdma_request_process().
This clarifies the implementation considerably and
cleans up a few corner cases. Unfortunately, the diff
is also enormous and there does not appear to be a
way to reduce it.
Change-Id: I5741da24bcffc1aef367ebfe3dd1f589c5746901
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374540
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This function also looks suspiciously generic and can
probably be moved to general nvmf code in the future.
Change-Id: I7849d2d7952b245a065393ce4be5d5e05c8bd8c2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374539
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This can probably be moved to the generic nvmf code
in the future, since nothing about it is RDMA specific.
Change-Id: I99103e174d99a619d36e519820a8a8a9b56473ac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374538
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also remove the stored controller data from spdk_nvmf_ctrlr and instead
generate up-to-date information every time the command is called.
Change-Id: Icdcc7c826eff25711c6700d12089a86a8dedee54
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374559
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Both regular NVM controllers and discovery controllers implement the Get
Log Page command; combine the implementations into one in ctrlr.c.
Change-Id: I7fabf40ec52d8738263ac152afe9cd7773ff7fbd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374555
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Simplify the initialization of controller identify data and properties.
This is mostly common between discovery and NVM subsystems.
Change-Id: Id8074d5260213e32892fd77845884a80071c9d88
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374534
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I50be9315d19c4189140f79634841ee53315470cf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374533
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow passing the NVMe namespace optimal I/O boundary through the bdev
layer.
Change-Id: I27a2d5498df56775d3330e40c31bd7c23bbc77a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374532
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, the shared buffer pools were allocated on the
nvmf controllers. When a new connection was established,
the CONNECT command needs a 4k buffer, but we didn't know
which nvmf controller it belonged to until after the
CONNECT command completed. So there was a special case
for CONNECT that used in capsule data buffers instead.
Now, the buffer pool is global and always available. We
can just use that always, with no more special cases.
This has the additional nice side effect of allowing
users to run the target with no in capsule data buffers
allocated at all.
Change-Id: I974289f646947651c58d65cf898571d80e9dee9b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374360
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is old debug code that isn't needed anymore.
Change-Id: I2c9ab9b3a63178169c48342bfacb39c59f261087
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374359
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The memory maps are device specific, but the buffer pool
can be shared across the entire transport. The size
of this global buffer pool isn't currently configurable,
but needs to be.
Change-Id: Ia32a11c7de5b63250bc22e80ccfe33d780e9bd5e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374373
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is just a convenience and replaces the common practice
of passing -1.
Change-Id: Id96734307ebf52ef0ee7dba0e7ac89602b2b5b1a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/374520
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When users don't enable hotplug option in their configuration
section, SPDK will enable it by default. DPDK will print probing
messages continuously for NVMe devices which don't belong to SPDK.
Change-Id: I8c43335a282ecba206b4b5305bd881d2bd07836e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/374486
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
PAGE_SIZE is the host memory page size, which is irrelevant for the NVMe
driver; what we actually care about is the NVMe controller's memory page
size, CC.MPS.
This patch cleans up the uses of PAGE_SIZE in the NVMe driver; the
behavior is still the same in all cases today, since normal NVMe
controllers report a minimum page size of 4096.
Change-Id: I56fce2770862329a9ce25370722f44269234ed46
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374371
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added mutex to synchronize vdev access from external threads.
This is the next step towards fixing synchronization issues
between vhost reactor, RPC, and DPDK.
Change-Id: Id4b52658e05d02c479618ae0e5b5e58af2f02789
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371175
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
new/destroy_device implementations in particular backends now take
spdk_vhost_dev pointer.
This patch is a first step towards fixing synchronization issues between
RPC and vhost reactor. See the next patch which introduces generic
vhost mutex in vhost.c.
Change-Id: I448492330734726c21189f71ec7a9a8ed81c8195
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/372073
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Try to do the same as DPDK does: volatile write on used->idx and memory
barier before reading avail->flags.
Change-Id: Ibe4629a8228a02088913593ac9b32de56a60b062
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/373578
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I82afad8a8607d4cd12e2e13c763fb5ecb041bb4a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373663
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Report the Ceph pool and RBD name in the get_bdevs output for RBD bdevs.
Change-Id: I0e9be0b540e90503ce052c968f979b5887673c24
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373416
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
An optional field was added in NVMe 1.3 to indicate the optimal I/O
boundary that should not be crossed for best performance. This is
equivalent to the existing Intel-specific stripe size quirk.
Add support for the new NOIOB field and move the current quirk-based
code so it is updated in nvme_ns_identify_update().
Change-Id: Ifc4974f51dcd59e7f24565d8d5159b036458c6e5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373132
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
replaces all references to strerror in the spdk lib directory with
references to the thread safe strerror_r
Change-Id: I80d946cce3299007ee10500b93f7e1c8e503ee41
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/374012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is one scenario, when one large read IO is splitted into several
subtasks 1 - N, and the subtask N return successful, it will be stored
in the subtask_list of primary task, but the other tasks could return
error, then when we try to return the subtask N, it will failed, this patch
will make sure the large read IO command return correctly if any of the
subtasks failed.
Change-Id: Ie6bcb79a081acf30f4e4c177c0f7568495ff2b71
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/373450
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I4797e3900eb425f8cddec1543a4612d4d98e07a6
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/372990
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
From the exising code, the comparison should + 1.
Suppose offset = 2^19, we still can be fit into
tree with level =0, since there will be 64 buffer,
each with size 2^18, so we do not need to
increse the tree level.
Also a unit test is added to demonstrate this.
Change-Id: I95d3542b0881aa7bb661bc57bc789cc4ef4e7509
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/372396
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The code can be merged into cache_free_buffers
Change-Id: I5da59ae5c5ea2b91d4aecd15a611ad6731bd4c56
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/372993
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added helper function to check if vhost controller supports given
feature.
Change-Id: If20883f5dd6d5fedf7fc253239961fdb55ca51fd
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/373702
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In this iteration, we only support write_zeroes in the form of a
deallocate call that returns all zeroes.
Change-Id: Ica837ce70672174df63012719de60463fdb799cf
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372005
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add functionality to the bdev layer to handle the nvme write_zeroes
function.
Change-Id: I0dadad273b28c16db5a2275f7d8d57e98253a8d3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372171
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SCSI spec says that zero transfer length shouldn't be considered an
error.
Change-Id: I98958cc393e0e487e25fdbb0eb7fc8126aff9945
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374320
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We report SPDK_WORK_BLOCK_SIZE (1 MiB) as the Maximum Transfer Length in
the Block Limits VPD. The initiator should not submit a request larger
than this; if it does, fail the request.
Change-Id: I39575cdca4555ac1f78e055a48569be3f47e4781
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373162
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6a733ab00b61866d68d584a330020b9cd29e25b8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/373840
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It wasn't used anywhere.
Change-Id: I1ea580af374c730d8e6336a6a3db6c05116e6dba
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/373839
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Port is a more commonly used term.
Change-Id: Ia85a49b8e36ab73d777a905081f1584811b8cdec
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/373838
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is one of these per ibv_context.
Change-Id: I660fed954c5a77fed9a6bda2321583ef05b30439
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/373837
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No longer directly include env_posix.cc. Instead,
use the EnvWrapper class from the public header
env.h.
Change-Id: Iab97f943d26ca9f07ad2b80f4f3706e1593f3caa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370585
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
None of these make sense as global parameters - they're
all only configurable per-disk. This is a large simplification
and removes the SCSI library's dependency on the config
file entirely.
Change-Id: I1236158a23fa49e437938c51022b13772e404561
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371598
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The transport API now allows for multiple transport
objects, so allocate them on demand instead of using
a single global.
Change-Id: I5dd35f287fe7312e6185c75ae75e2488ec8cc78e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371990
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For now, this is a name change of controller to poll_group
in the transport layer. Over time, the poll_group will
become a more general concept than a controller, allowing
for qpairs to be spread across cores.
Change-Id: Ia92a2934541ad336f462f73175d53aaaf021f67b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371775
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I10857de922d5a17131910aca92c73995ea6ab8f6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/373828
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0e8c34237acc88fb51bac56c2f99df52ec199f9b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373835
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The construct_aio_bdev RPC still accepts "fname" for backwards
compatibility.
Change-Id: Ibf44f5f3667c6de4b827f7f3f8787aff0a6c4fc9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373834
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3ac636c18d7e71e0184d4f67ec54a36217a11db0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373833
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Disk size in bytes is only used within create_aio_disk(), so we don't
need to save it in the struct file_disk context structure.
Change-Id: I63d230448a67c2b49c57eac2b4d44dce27c303cf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373832
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a file-backed AIO bdev to test it out.
Change-Id: Ifdf206bbdf6cae9379fdc02c80755e96a7198bce
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373673
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the block size cannot be determined, just return 0 rather than
assuming 512. This will allow the caller to tell whether the block size
was actually successfully retrieved.
Change-Id: If8a2b8ce498ba6de18238baedb62c8972cb32a74
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373671
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Completion routine for reading superblock was not updating
the bs struct with the superblob id thus it would have
failed to be persistent from the application's perspective.
Change-Id: I4aa51ebe73315e9be7e08f82340b03f0e3836df7
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/373406
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
A single warning message is printed instead.
This is required for VMs which have memory mapped virtual devices. (e.g
NVDIMM in Clear Containers). This memory won't ever be used by guest
kernel for IO processing.
Change-Id: Ie24501acbdb3ba0d67bd29b146a09b222451427d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/373224
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
If a bdev-based controller is partially set up but then needs to be torn
down due to an invalid configuration, the nvmf_bdev_ctrlr_detach()
function could try to put a NULL spdk_io_channel.
Add checks to avoid releasing resources that weren't allocated yet.
Change-Id: I779c80f4dc654af3c4b0a49d8d216e13ab5f8333
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373390
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ia2202eadfb8140b7a51dd64d4241e85aceff361c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373408
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All strings decoded by spdk_json_decode_string() need a corresponding
free() statement.
Change-Id: I5896eada11deed791c5f1579db992aa382e02f82
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373404
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I29a46cbaef20e15173781680a62bc8087ca5672f
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/372426
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There are now three simple functions on the transport:
listen(transport, trid)
stop_listen(transport, trid)
accept(transport)
This makes the code quite a bit simpler.
Change-Id: I550343a084b5c095240703952c8c07ae535b5c16
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371774
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Instead of scattering direct calls to the function
callbacks throughout the code, add some wrappers.
This will make some later refactoring marginally
easier.
Change-Id: If735089967e3ce828dcff68f2430e7810bf2f123
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371749
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Create one transport per nvmf target. Today, there is just
one global nvmf target, but this paves the way for multiple.
Change-Id: Iaa1f8c5e7b3c1e87621ef2a636c68c2dd8fd929e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371748
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This also changes the SGL -> PRP case to translate each 4K page from
virtual to physical, in case the buffer is not physically contiguous.
Change-Id: If027f9d656c52c56504f0c64cd4464e16440df63
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/371616
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Match the terminology used in the NVMe-oF specification,
which is queue pair. For the RDMA transport, this maps to
an RDMA queue pair, but may map to other things for other
transports. It still is logically a "connection" from
a networking sense.
Change-Id: Ic43a5398e63ac85c93a8e0417e4b0d2905bf2dfc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371747
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is just a rename - the functionality hasn't changed.
Use the same terminology as the specification (which is controller)
so those familiar with the specification can more easily
approach the code base.
This is still conceptually equivalent to a "session" in the
networking sense.
Change-Id: I388b56df62d19560224c4adc2a03c71eae6fed0d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371746
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Unmapped blocks on some older nvme devices will read zero even if the
device does not explicitly define the unmap behavior.
Change-Id: Ia825a406cbd01f89192c300cfe35013fb4aed715
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372006
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ib6245e981d550e951a518176730a0e8d88378207
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372341
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ia45d356fbc2c4baea86a96eb28264f104f593a9c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373156
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove the redundant sector size check; the generic bdev code already
checks for this.
Also use the bdev blocklen field for both offset and size calculations.
The bdev blocklen is the same as the namespace sector size.
Change-Id: Ia8061eb4cfc229d4b6fbe2caabf2dd81656bc697
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372862
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I33506d6b9ff09c45c057326f7339d742eebc45b4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372861
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Swap the meaning of the return value to match the name of the function.
Change-Id: I89dc09e3b309a06586adf2ab750092f06077ffd9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372859
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9134ffcb9713e0613de61d3178940390291dc287
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/372621
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe-oF target was written before we defined
spdk_nvme_transport_id. Now that we have it, go back
and replace all of the locations where we individually
tracked traddr, trsvcid, trtype, etc. and use a trid.
Change-Id: I84334a12c7581f414c1e84680f122fe885a3b9dd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370744
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ie05f58e677107072fea6cc7702bab47a077cb595
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370743
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I0705e9f203e3cb905bf2e6a7bfc72bbb424a6180
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/372644
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some macros depend on others, so we change to
change it and it will avoid potential wrong change
only one value
Change-Id: I2490064a19adc5cbd03a2c231d5f14fbf5b95792
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/372217
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is far simpler, although it does limit the bdev
layer to unmapped just one range per command. In practice,
all of our code reports limits of just one range per command
anyway.
Change-Id: I99247ab349fe85b9925769e965833b06708d0d70
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370382
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows the library user the flexibility to use a different
threading model.
It also provides a way to indicate when the connection is closed so the
app can cleanly shut down.
Change-Id: Ibc196c0b8334fcb8f50d0233def16c6acf3c90d6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372377
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use the CRC32 CPU instruction, if available, to optimize the iSCSI
CRC-32C calculation.
Change-Id: Ifb706528c28f5e6921ebf525274b959d8cac85a0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370766
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Factor out the iSCSI and GPT CRC32 functions into generic library
functions.
Change-Id: I1f1a5f3968a983b663a51bd984500492eeb12605
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370765
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id004e06eea8dfb5d7be24282bfe4d31069ff6573
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371025
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Just code movement, no changes.
Change-Id: Ie4eba079a6a9eae7632c784985cccb9bd18cd3a6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370757
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8cb413cd18b738438f1b1b3e00a438e1323e8b1f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/372170
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The value for lba_count is stored in a 0-based 16 bit register. here we
confirm that the value passed to that register is no larger than 2^16.
Change-Id: I234e55fc2b61338444dfe8f734e76f958d1f0443
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372370
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
1) Rename _nvme_ns_cmd_split_sgl_request to
_nvme_ns_cmd_split_request_prp.
2) Add _nvme_ns_cmd_split_request_sgl. This
function will be used with controllers that
support SGL, to make sure the request does not
span more SGEs than the controller or supporting
software supports.
While here, add a useful error message for both
the prp and sgl cases, if the child_length is not
an even multiple of the lba size.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifd04aee3c571359009260fe46400ce1844511aa3
Reviewed-on: https://review.gerrithub.io/372359
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For pcie, this just equals the number of SGLs we can fit
into the per-tracker memory.
For rdma, this is just set to 1 for now since nvme_rdma.c
does not support multiple SGEs yet. Once that support is
added, this will change to use MSDBD (Maximum SGL Data Block
Descriptors) instead from the controller identify data.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I34a4c546b5ff46918a296a73ed8cbcc6c9879d5a
Reviewed-on: https://review.gerrithub.io/372358
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Requests may need to be split in which case a child
request may have a size smaller than the SGE that
contains the child request's payload.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6c7ab76104d56fa9dde168cfdddb6320c7157f98
Reviewed-on: https://review.gerrithub.io/372347
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For ioq, target is supposed to respond with the same
cntlid as specified in the connect capsule, but the
Linux kernel target doesn't actually do that. It really
only needs to be set on the adminq connect, so just
do that.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4eec605f856bdad2c8614d505241566a9fe292ab
Reviewed-on: https://review.gerrithub.io/372345
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will avoid possible complitation issue.
Change-Id: I423d5e200c53cae4f8c5317d8b04e08a09c3b59a
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/371435
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
An I/O completion callback may delete the channel, so
restructure the poller to avoid touching channel memory
while triggering completions.
Change-Id: I612f10ff172481084386c9a3056fdd5e2f19e854
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370526
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change the poller to tolerate channel deletion within
an I/O completion callback. This won't happen today
because channel deletion is always deferred, but
prepare for that case.
It turns out this is simpler anyway.
Change-Id: Ibff23d84fe14247849e95cebc3c80369812bdd6c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370525
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is now only virtual mode. Virtual mode has been
improved enough to reach feature parity with direct
mode and performance benchmarks show no degradation.
Simplify the code by always using virtual mode.
Change-Id: Id5cdb5d4d8c54e661b245ed7250c2f9d66ca2152
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/369496
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prepares for enabling nbd mounting as a service within existing
applications.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I225ae20dc86b2d70a1a39a325e754b22f34feaee
Reviewed-on: https://review.gerrithub.io/369674
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Install signals by enabling new ones, not by disabling
all of them. This preserves default behavior.
Change-Id: I8d0e4753a5f321fc3756b41cd2312124fabeed29
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/372169
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Cleanly shutdown in response to these signals,
even if the user didn't provide a custom
signal handler.
Change-Id: I387bbbc0e4d848fd87ea489bae2cc79a2240d2da
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/372168
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch fix the bug for hotplug when test with write IO load which
need r2t, when the data out data pdus received at target side, the target
will try to add subtasks to the luns they are belong to, but the lun
probably invalid at this moment because we hot remove it.
Change-Id: I3d45dc6b7837944c105c2cca70e63dd4b608706b
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/371823
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
after move the spdk_iscsi_conn_handle_queued_tasks() into
spdk_iscsi_conn_execute(), we should handle the situation when the
lun has been removed and then try to access spdk_iscsi_conn_handle_queued_tasks().
Change-Id: I9ac7a5203b49274347c9ee9fbf19558ca87557ed
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/371813
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
we will retry the alloc_cache_memory_buffer outside the function if
it fail to allocate one cache buffer.
Change-Id: I276173e449e700ceb7703f68828153f566249ae2
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/371140
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9f2debc0a9404f4fc36ab307c73ead95a41cbd75
Reviewed-on: https://review.gerrithub.io/371021
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We don't actually need the socket mask.
Change-Id: Icec9e571e31f1955644b32c919e3f5a699338f0b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370722
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I93690c923feb1a78e88dd5b9d69d9e8e24fd6034
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370560
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The Linux kernel NVMe-oF target can easily be misconfigured to report
newline-terminated strings from the discovery service, since its
parameters are set by echoing into sysfs files, and echo adds a newline
by default.
Newline characters are not allowed as part of the TRADDR and TRSVCID
fields, since they are defined as ASCII strings in the NVMe specification
sense, which limits the acceptable characters to the 0x20-0x7E range.
However, we can add a workaround for misconfigured targets with trailing
newlines that shouldn't impact any valid configurations.
Change-Id: I5db183d5637128fa8d50c245f4bfa965cc3ce8e2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370593
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a helper function to remove trailing newlines.
Change-Id: I8b1a2bf3d70ef17e0bc7e74429ac955c68cb6bcf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370592
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ic4221e044eb5af92aa06e468eb989bee285022af
Signed-off-by: Jan Kryl <jan.kryl@nexenta.com>
Reviewed-on: https://review.gerrithub.io/371303
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The protective MBR entry may not be the first one. This is already
handled correctly when comparing the total size field, but the start LBA
field was always looking at the first entry.
Change-Id: Ie54e424b2e9cb546b1ed04192662936e04e08b6b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370747
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: If3cd7ee8251b5e311d5e1e9210085f8c2cbc83e1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370746
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove unnecessary headers and order the remaining #includes correctly.
Change-Id: I6b331aa1514e55e7bf56a07be23f630e4ae3fcdb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370731
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The message printed when start_lba doesn't match the expected value
would print byte-swapped values on big-endian architectures. On
little-endian architectures, the problem would not be noticeable, since
the conversion doesn't do anything.
Change-Id: I9e8d4485b5710f4333d04bb006bc204416c689cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370730
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2b6a22591d0a5f7435d9fd9dd8d6a1c854da3d89
Reviewed-on: https://review.gerrithub.io/371978
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
A virtio descriptor may specify a buffer that spans
a huge page boundary or even a vhost memory region.
So modify spdk_vhost_vring_desc_to_iov() to take this
into account.
While here, also change spdk_vhost_vring_desc_to_iov
to return int instead of bool. int return with -1 is
most standard to indicate failure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I71faefce0367dc9e44d70ea4429a28dd64f04c10
Reviewed-on: https://review.gerrithub.io/371756
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Randomly we loose some interrupts. This stop IO in guest till next
request is issued which is abort
Change-Id: I1a0b6391a324cabb0df17d2704126d161b1868f7
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/370248
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
bdev could be unregistered multiple times when all it's descriptors have
been instantly closed via it's remove_cb without any deferred
event/poller
Change-Id: I128716077b0512c6334bdd113220684f8cfcbecb
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370949
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Update exisitng tests with vhost blk information
Add tests for scsi/blk hot-attach, hot-detach and hot-plug
Change-Id: I95dad5986d3795430fea304712a6491dfef712d0
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/369168
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
- task_data_setup() - value of 1 is no loger returned
- task_submit() -removed outdated comment
Change-Id: I523a465eba7af93535e2dc3a583abb315950f4b3
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/371154
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
blk_iovs_setup() error code was missinterpeted and no error returned for
IO that was directed to removed bdev.
Change-Id: Iec5ebef20734cca07f20f068b83b74b189cdcb66
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/370711
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Lukasz Galka <lukaszx.galka@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Patch afe860ae deferred freeing the io_device. However, for nvme, the
io_device context (spdk_nvme_ctrlr) is still being destructed before
io_channels are destroyed, causing segfaults on hotremove.
This patch defers io_device context destruction and fixes nvme
hotremove.
Fixes: afe860aeb1 ("channel: Correctly defer unregisters if channels exist")
Fixes: 5533c3d208 ("util: defer put_io_channel")
Change-Id: I7af699174cac0c6c6a6faa2cc65418c47347eb9a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370459
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Implemented abstract vhost event layer on top of virtio eventq.
This allows us to defer virtio-event-related actions to be called from
the vhost poller thread. This is required for hot-attach, for which
io_channels have to be created on the I/O thread.
This adds full support for hot-attaching and hot-detaching vhost scsi
devices. They can be now attached to a controller via RPC at any time.
Change-Id: Icf353bfcf69c83ef16b8fc771ea4c487002094f9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/370016
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch move the spdk_iscsi_conn_handle_queued_tasks() to the main
loop of connection poller, make the logic more clear, it will also fix
one issue of hotplug:
for large read command, it has the potential risk:
one task will be split into N subtaks, when primary task return error and
try to send data in pdu, it will call spdk_iscsi_conn_handle_queued_tasks(),
the primary task is pending now, and all the subtasks will return error from
lun layer synchronous, this make the primary task return from the function
spdk_iscsi_transfer_in() after all the other subtaks, but when the N - 1 subtask
return from function spdk_iscsi_transfer_in(), it meet the condition:
primary->bytes_completed == primary->scsi.transfer_len
then it will send response pdu, after this, the primary task return from
spdk_iscsi_transfer_in(), it also meet the condition, so it will also try
to send response pdu, this will make the application run into error.
Change-Id: I72206c1ce303f5fb6bd650713742d5819a88a30f
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/370339
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Hotremove event was detected on base bdev, but wasn't propagated to
vbdevs. This patch makes base bdev destroy all it's children once
hotremove is triggered. This fixes hotremove segfaults and adds full
support for split/gpt hotremove.
Change-Id: I7f8b0b109ef237783b6b2e33a18f68c59a8bbe72
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/367824
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unregistering a device should be deferred if I/O
channels still exist. Those I/O channels are likely
undergoing a deferred unregister themselves.
Change-Id: I67186232a58f212b867f6ef894c3d37aae2a4d53
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370351
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a new struct spdk_nvme_io_qpair_opts to allow the user to override
controller options on a per-I/O qpair basis.
Existing callers with qprio == 0 can be updated to:
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, NULL, 0);
Callers that need to specify a non-default qprio should be updated to:
struct spdk_nvme_io_qpair_opts opts;
spdk_nvme_ctrlr_get_default_io_qpair_opts(ctrlr, &opts, sizeof(opts));
opts.qprio = SPDK_NVME_QPRIO_...;
... = spdk_nvme_ctrlr_alloc_io_qpair(ctrlr, &opts, sizeof(opts));
Change-Id: I8ac3ea369535cfde759abbe75e1d974b6450a800
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369676
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch also releases bdev module and closes claiming descriptor on
regular split base destruction.
These problems must've been overlooked in patches 26d6770f and be9a3b9f.
Fixes: 26d6770f1c ("GPT: add GPT bdev support")
Fixes: be9a3b9f69 ("bdev: pass descriptors for I/O operations")
Change-Id: Ib47e2c4d3b99c6d3f2dbe7ef01be81ca3dd97341
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370181
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This was probably overlooked in patch be9a3b9f.
Fixes: be9a3b9f69 ("bdev: pass descriptors for I/O operations")
Change-Id: If29ad65ac168f3dbf7e1602f26f939dfbf17599a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370180
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib756212d227fb71b9ef3d486223740e4cb152815
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370200
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was left behind in commit 122e28465 ("jsonrpc: move closed conn
handling before poll()"). It is not needed now that the closed
connection handling is in a loop by itself.
Change-Id: I09959003bc6a370f1621815aebdd428be3304e5e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369906
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ie25a87c4b3f781299fa744fdcff6c9a63d473935
Signed-off-by: Roman <roman.sudarikov@intel.com>
Reviewed-on: https://review.gerrithub.io/365723
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Otherwise we'd fail sanity checks when closing the claiming descriptor.
Current approach works because we never close the claiming descriptor.
Fixes: 4fc7e66614 ("bdev: add vbdev claim/release semantics")
Change-Id: I1c1f0c11450e749419726df460334ab97b43b584
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370179
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
These variable names are changed to retain conformity with astyle 3.0.1. Astyle 3.0.1 recognizes 'final' as a keyword and incorrectly formats the iscsi_spec.h file breaking the build. Names were changed to avoid this case and maintain consistency within the struct.
Change-Id: I39c29d768c0ddfd459a9e9212c29cf564dad1963
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/369905
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When device has more than one open descriptor, remove_cbs of particular
descriptors could be called more than once.
Consider the following scenario:
bdev X with 2 open descriptors A and B.
X is removed (hotremoved for instance)
bdev_unregister(X) is called
* bdev->status = REMOVING
* A->remove_cb is called
* some poller is started
* B->remove_cb is called
* another poller started
* poller from A->remove_cb finishes it's work and closes the desc:
* bdev_close(A)
* A is removed from bdev->open_descs list
* bdev->status is REMOVING, so bdev_unregister(X) is called again!
* B->remove cb is called again!
* another poller starts? segfault?
Fixes: 57d174ff67 ("bdev: add spdk_bdev_open/close")
Change-Id: I0a898ec0aee521d0b2a1168fe7d469cc41a8ef4f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/369727
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the spdk_filesystem object is created but the initial
request allocation fails, correctly clean up. This
addresses a static analysis failure.
Change-Id: If47a380d8804a279ec92d2aee3de7d86bb5c67fa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/369901
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
gai_strerror() is documented as thread-safe, so this should be safe to
use from a library.
Change-Id: Ia0ec0b5c387db8993dd1ba3a3029562f25cc210d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369642
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
GPT uses the standard IEEE CRC-32 polynomial, not CRC-32C.
Change-Id: I94dae01ec7b31cb3c3efc735d9dfa4e0cfea9ce4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369306
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As specified in the doc of spdk_for_each_channel:
```
Once 'fn' has been called on each channel, 'cpl' will be called
on the thread that spdk_for_each_channel was initially called from.
```
Fixes: ff87d29cc3 ("io_channel: Add mechanism to call a function on
each channel")
Change-Id: Ic60b061ec402672f510d99697943e96ff9a73417
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/369719
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Factor out the common PDU header and data digest calculations into
helper functions in iscsi.c. This eliminates the need for the crc32c.c
iSCSI-specific padding functions spdk_fixup_crc32c() and spdk_crc32c(),
so remove them.
Change-Id: I8cbf269c43177d7483f1df2e7ce9ce83776e7169
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369312
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
-changed "cpu_mask" to "cpumask"
-changed "name" to "lun_name"
-changed "bdev" to "dev_name"
Change-Id: I52b77fa01384df8e6e725f236f23cb568b35f189
Signed-off-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/368774
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This enables checking permissions - for example,
spdk_bdev_write will fail if the descriptor was not
created with write permissions.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I68b65a560f471f2e0f71a7f42cfa6689b911110f
Reviewed-on: https://review.gerrithub.io/369493
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We still will sort the bdev_module list so that modules
with an examine() callback are initialized first. This ensures
they have a chance to initialize before later modules start
registering physical block devices.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I792cfb41b0abe030fe2486a2c872cbf329735932
Reviewed-on: https://review.gerrithub.io/369486
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Module initializaiton was made asynchronous recently
to support bdev modules like gpt which need to do
asynchronous I/O. But all modules now do any
asynchronous I/O in their examine() routines, and
init functions only do very basic operations to be
ready to handle examine() callbacks.
So simplify the bdev code and modules to go back to
a synchronous init procedure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idb16156796ad7511d00f465d7a2db9acda6315b6
Reviewed-on: https://review.gerrithub.io/369485
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This includes file names, functions, #defines, etc.
There are still a few uses of "blockdev" outside of
include/ and lib/ - these can be handled later.
This preps for a future patch to consolidate vbdev
modules and bdev modules into just bdev modules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I70e575709ae1b0a116b08515fd38ae793de05377
Reviewed-on: https://review.gerrithub.io/369325
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
vbdev modules still open/close bdevs as normal, but
should open bdevs read only when tasting (i.e. reading
the GPT to see if there are SPDK partitions). When
a vbdev module is ready to claim the bdev for purposes
of creating virtual bdevs on top of it, it calls
spdk_vbdev_module_claim_bdev(). It can pass its
open descriptor as well to have it promoted to
write access (required for future vbdev modules like
logical volumes).
Note: error vbdev was changed to copy the base bdev
parameters one-by-one instead of a blind memcpy - we
do not want to copy the base bdev's vbdev_claim_module
into the new bdev!
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If2ee67dc78daf96050343c473671aa3402991bb1
Reviewed-on: https://review.gerrithub.io/368628
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, we had a pdu->ahs pointer that was always NULL (never set
anywhere), and we would try to read data into this NULL pointer if the
initiator ever sent a PDU with a non-zero TotalAHSLength.
Rename the existing ahs_data array in the PDU to just "ahs" to minimize
the necessary changes. We never actually dereference the ahs structure,
so its type is not important. (We can cast it later if we add support
for anything that requires an AHS.)
Change-Id: I10d19a6e0d99f326794cbe6469eacedadc634c67
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369315
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
During RocksDB testing with MySQL, we found cases
where blobfs would try to update and sync the length
xattr on the underlying blob while an existing update
was already in progress. This was primarily driven
by RocksDB performing appends and syncs on the log
file from multiple writer threads.
The simplest way to fix this is to just process one
sync_request at a time. There could be a tiny bit
of inefficiency here if multiple threads are appending
and syncing a file in parallel - we can look at some
additional optimizations if we find a case where that
is noticeable.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reported-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I7ab7814494d365bae8716efd0b828337286cc7b7
Reviewed-on: https://review.gerrithub.io/369490
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
recv() returns 0 when the remote end of the connection is shut down, but
there is no such rule for send(). Remove the incorrect treatment of
send() returning 0 as an error. The remaining code will treat a send()
return value of 0 as a non-error condition and will continue to work
correctly.
Change-Id: Ia753b802d95428104a62d1acb13c5fa437add6b4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369299
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I50203e0e02d2201fea5112789c1fd84b9a61417a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369283
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Myrocks engine uses errno(ENOENT) as one of the condition
to create new database, this is okay for POSIX environment,
to support MySQL, spdk environment layer set errno to right
value as well.
Change-Id: Ib633f915ffafde0eacc0a8a0c451e510396d9176
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/369320
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1899a47fa9d9821c16ea648bbe3290f6306d0e3d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368626
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_json_write_string_utf16le() writes a UTF-16LE string to a
JSON write context.
Change-Id: I413ffb8a3dee6e1b44ec96ce2415fd1b9c36320f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368625
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If a connection is closed by the remote end, the JSON-RPC server could
potentially call poll() on the pollfd containing the invalid file
descriptor. Rework the logic so that the pollfd's fd field is set to a
negative value so that poll() will ignore it until the connection is
fully cleaned up by spdk_jsonrpc_server_conn_remove().
Also add handling for the potential error conditions returned by poll()
so that if something does go wrong, the server doesn't get stuck polling
a broken pollfd forever.
Change-Id: Id02e3a230740c8ffd513888cb0564891b3aca069
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369285
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make sure that we check any closed connections even if poll() indicates
that no sockets are ready, since closed sockets won't ever trigger
poll().
Change-Id: Ie543cc2848d07f3d8e22662cb22c3d0f5cf3d174
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369292
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Virtio block doesn't know how to handle hot-remove so no way of
informing guest when that happen but at least we don't crash.
Change-Id: I54576bc0693c2e706ef3c45b0de313e9beb2a2c7
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/368789
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This variable was misleading and unnecessary. Replaced all it's
occurences with SPDK_SCSI_DEV_MAX_LUN.
Change-Id: Iaaf9ed5efb60f9a89585121d2fbec7b43c3723e9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/368115
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
lun_id could potentially overflow the dev->lun array bounds if it was
equal to dev->maxlun, which is actually the maximum lun array index plus
one, not the maximum valid LUN index.
Change-Id: I5662c6f6fa634a7dd755c9bfc1a24d3c4cabe7ea
Reported-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369074
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Renamed it to avoid misconceptions.
Struct rte_vhost_vring describes a virtqueue, not a vring.
Change-Id: I89b94c8d78052b1a4796a9b74653237e5f8b6f52
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/368720
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows vbdev modules to be ready for examine
calls for (physical) bdev modules when the latter
initialize.
This requires the following modifications to existing
bdev modules:
1) error and split now search their config sections
at examine time (instead of init) to see if the
bdev should be consumed by the vbdev module
2) gpt is simplified considerably - it no longer
needs to save bdevs to examine when
gpt initializes later
3) nvme must register its io device before registering
the bdev, since vbdevs may immediately start trying
to send I/O to the new nvme bdev
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8fe5686092ffb15fc8bdbc068b09add229d9da6c
Reviewed-on: https://review.gerrithub.io/368598
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add additional fields to the g_bdev_mgr to enable
deferring spdk_bdev_init_complete when modules have
finished initialization, but vbdevs are still processing
examination callbacks due to asynchronous I/O.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I12dc7cb08e44e022b5bad75ba9a946571eb65957
Reviewed-on: https://review.gerrithub.io/368832
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a new spdk_vbdev_module_examine_done() API which
vbdev modules can use to notify the generic bdev layer
once a base bdev examination is complete.
This is especially required for asynchronous vbdevs
like GPT which must issue I/O to the base bdev.
As part of this patch, add examine callbacks
for both split and error, which for now only call
this new functions. Later patches will move code from
the init callback to the examine callback for these
modules. examine callbacks are now required for all
vbdev modules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I49f2d012d1675b878bcd23afff427c740c6502c7
Reviewed-on: https://review.gerrithub.io/368831
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This eliminates overloading of the term "register"
in the context of bdevs, as well as opens up the
idea of examining bdevs not just when they are
registered, but also after they are closed with
write access.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9e15f9dc0fa4e02214f188f987f9da2dbc8db1f7
Reviewed-on: https://review.gerrithub.io/369042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With vbdevs, there are many more cases where the last
(or only) channel for a given I/O device may be destroyed
in the context of the poller for that I/O device. To
avoid returning to the poller and having it check
for data on a resource that was just released, instead
defer the actual put_io_channel work via
spdk_thread_send_msg().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic99776bddbe9a305f221f8c094ea97dce2d6df0b
Reviewed-on: https://review.gerrithub.io/368619
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic3051b63942770e45be22af0ae03a78a7c543f81
Reviewed-on: https://review.gerrithub.io/368597
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Move the per-connection send buffer into each request, and allow a
connection to have a queue of responses ready to be sent.
Change-Id: If6b2151691c4cd76f3cf7cde0cdd8f20cac77ceb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368470
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will be necessary when the lifetime of a request can exceed the
lifetime of the values stored in spdk_jsonrpc_server_conn.
Change-Id: Icd9772eb142e3f6ae69303aff1e12bc213f435a4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368455
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will greatly simplify the implementation of asynchronous requests,
and asynchronous requests also allow clients to submit multiple
overlapped requests, making batches unnecessary for executing multiple
RPCs at once. Additionally, our RPC client (scripts/rpc.py) does not
use batch requests.
Change-Id: I2529793c54b43acbacd934d82926aa32e286210c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368449
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
struct spdk_vhost_task was renamed to spdk_vhost_scsi_task in commit
68f0c87e64, but this was rebased without
adjusting the spdk_vhost_task introduced by commit
05fd28399a.
Change-Id: I7046d04d3ce56d62fdfb1166f8b4c5676bc7397b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369080
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
We need MP MC ring for tasks. So instead implementing this add per
controller ring to avoid this issue.
Change-Id: I5926ad7866ab28251aeebd163917de2df2b44a22
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/368547
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96cf4e40e8218c6ba150fe9ffead58340c7bdf6a
Reviewed-on: https://review.gerrithub.io/368627
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The function body uses VFIO_IOMMU_MAP_DMA which appears to be a
copy&paste mistake, make it VFIO_IOMMU_UNMAP_DMA because we are doing
the opposite of spdk_iommu_mem_register.
Change-Id: If9f3b188178e71ff71221c77c1680b679fec1df0
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-on: https://review.gerrithub.io/368551
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a name parameter to the MODULE_REGISTER macros, and then
modify each bdev module to pass a string for its name.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If878617ce3c3eacfcf5df44ed6f194f11c66f78f
Reviewed-on: https://review.gerrithub.io/368596
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ibb28b8432c94e70f522bdf34c5f4a10e4c25a8bb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368610
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These are UEFI-style GUIDs in little endian byte order, not standard
UUIDs.
Change-Id: I4d61afa2901830c784c24a5e039bba1d98f32e62
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368609
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Fix the partition type GUID comparison to actually look at the partition
type GUID, not the unique per-partition GUID, and fix the test to match.
Change-Id: Ie64f1effcc75883f17ccf6240f6469161d2a5aa5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368606
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Support both SPDK_NVME_FW_COMMIT_REPLACE_IMG and SPDK_NVME_FW_COMMIT_REPLACE_AND_ENABLE_IMG.
Return code will specify if conventional reset is required.
For now, return error if subsystem reset is required.
Change-Id: I41a05675a210dd0bbf170517b32ee9e05da9a797
Signed-off-by: Isaac Otsiabah <iotsiabah@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/367287
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It should not print error if there is no GPT
signature
Change-Id: I6e5f8d31aed62dfb420f0ff0560bfbf8a7e8afb3
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/368476
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The purpose is to store which partition is used from
the original bdev, and it can be used to read
the further partition entry info.
Change-Id: Idbc4452846e88b486ff281c288704af80938788a
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/368486
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will enable asynchronous request handling in a future patch, and it
also removes the need for the RPC handlers to know about request id and
the JSON-RPC rules about notification-only requests.
Change-Id: I25aaa8e48bff8d5594ffcccecb61842b1e31ec3c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/368225
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I6a138e1c1d775e8c8bfeede9600f8b0f799ecdad
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/362445
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
-Add a configuration option: Read-only flag
Vhost block controller can be set in read-only mode.
Option can be enabled in config file or in RPC call:
'construct_vhost_block_controllerr' with '-r' option
Change-Id: I7e58243be00d33bc04120d573fd4ed7775bb9b2c
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/366086
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now spdk_bdev_create_bs_dev() opens the underlaying spdk_bdev.
Due to that spdk_bdev should be closed when bs_dev is destroyed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0805f29abfeb52ff1db067bad7b7e0f13fc39398
Reviewed-on: https://review.gerrithub.io/368351
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Always use "Local7" internally. We want the log API
to be generic instead of syslog specific.
Change-Id: I021f719e90c236f123fa1cadebc0c199b87ba077
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365295
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Retire the old claim/unclaim semantics in favor of
open/close. Clients must now open a bdev to get
an spdk_bdev_desc, then pass this desc to get an
I/O channel.
This allows multiple clients to open a bdev,
although only one may open a bdev with write
access.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4d319f1278170124169a8a75fd791e926b3f7171
Reviewed-on: https://review.gerrithub.io/367611
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Vhost devices can now be removed via RPC at any time.
Change-Id: Ib91dd6eb11ae8c777e8b9498d140e89a3fe382db
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/366726
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added new function in preparation to implementing device hotremove.
Change-Id: I5b85f76f543b882acf3b0fe40c9e92125594b257
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/366725
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5b77212335e2f10ce263dc59baad87236b98048a
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/367305
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Each virtual bdev now has a pointer to its base
bdev, and a base bdev has a pointers to any virtual
bdevs built on top of it.
Also add a new set of leaf iterators, to get only
bdevs that have no virtual bdevs built on top of
them. These iterators are now used by the bdevio and
bdevperf utilities, in advance of the claim/unclaim
semantics getting removed in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I669783764407cdd4920b5ee121959e2a58c8d436
Reviewed-on: https://review.gerrithub.io/367610
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows the user to optionally specify the address family for
construct_nvmf_subsystem (default is IPv4).
Note that the RDMA transport still only supports IPv4 because of the way
it binds to the listen address; this will be fixed in a separate patch.
Change-Id: I534ed75f6f81e53559d1bebcd2f34f1a2b210a97
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367429
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch removes executable flag from couple files
that should not have it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib4287ec3763a4187a756c18845c61d8b50729820
Reviewed-on: https://review.gerrithub.io/368042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Includes macros for wrappers (for syscalls) and stubs
(for SPDK functions) including an example of syscall
wrapper as well as a stub with both pointer and non
pointer values.
Change-Id: I9b19d81d5b9cbf2bbb327f58dbf985b3b253e800
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/366348
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Icdb017d7e6b0a38f8ff3aa78ea60117936dfe178
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/366702
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This flag is needed for compatibility with older versions of the virtio_blk library.
Change-Id: I8243d51a39971dd37d0c65b29bd976b5b84978aa
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/367612
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Removed yet another direct DPDK dependencies.
Change-Id: I4df3cb8975bb7a00b1316ef7ed449248f28ab7ee
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/366724
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_vhost_get_tasks() is now fully generic function for getting tasks,
which have to be specifically initialized *later*.
This allows us to remove extra loop inside spdk_vhost_get_tasks().
Change-Id: I9a9155189599cbae1b2eb94f64fba29a3e2d010b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/366723
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removed get_scsi_dev and get_scsi_lun functions, moved virtio lun field
parsing into a single function.
Change-Id: I2d1588491e0aee523b053d8ea49fdc6bb7f90613
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/366721
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Vhost scsi tasks aren't complicated enough to have their own files.
Also used spdk_ring instead of rte_membuf for task management.
This patch is a first step towards making vhost task pool
queue-specific, so that it can be single-producer, single-consumer.
Change-Id: I181417f49ccd9a5b8f53d4b96c9fefddca087692
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/366720
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of getting tasks from mempool 1 by 1, prefetch a whole chunk.
Change-Id: I17f61e3de9b081b61af7a2a8568681aafe26ab0a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/366719
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removed these functions in preperation to removing task.h/task.c.
Change-Id: I84b3c81505c0b8a7d08e2ca803aada1d20bc518e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/366718
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since vhost_user_set_features failure is not handled in any way, a
single error log has been added to at least to let the user know that
something has gone wrong.
Change-Id: Ifcf27320af75ba74347b742643b23e43b7c01149
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/365807
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As of virtio spec 1.0, driver must not accept flags which the device
did not offer (section 2.2). However, that flag is apparently being
accepted, causing silent exception to be triggered in rte_vhost. This
results in all negotiated features to be rejected in rte_vhost.
This patch is a workaround. Enabling that flag does not enforce us to do
any additional actions.
Change-Id: Iede0c0360de33d438f109442c7a83231e9d4479e
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/365806
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A vhost_dev had been explicitly converted to vhost_scsi_dev in a
following manner:
vhost_dev* -> void* -> vhost_scsi_dev*
Change-Id: Idfd4307bfea7385d71e67f140554dfc2e86447b5
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/367310
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Implemented eventq. For now only hotremove is supported.
Change-Id: I1ec7aa2137173b5dfb30e9906dd41707e371b7a8
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/364285
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Renamed it in preparation for handling eventq & hotremove in the very
same poller. It would only complicate code to handle all of these in
separate pollers.
This patch does not change any functionality on it's own.
Change-Id: I321e2ced0d6afb3ccb66a13bc25bbf42da20417b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/367528
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added optional callback inside scsi lun hotremove, so that higher-level
abstraction can be notified about hotremove.
Change-Id: I5f1bd8160e3d770a484068dd73928bc2b64c876f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/367309
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There was already handling for a NULL map pointer pointer, but the inner
pointer wasn't checked. Treat pointer to NULL as a no-op as well to
simplify calling code.
Change-Id: I0a213233c021957ab2f4b6c1dd304034ca98b868
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367433
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also add adrfam to the NVMe bdev JSON config output.
Change-Id: I9472bda04947cffc0df9b02eba0035bac01b7d7b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367292
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For each virt queue's kickfd and callfd, there are 2 invalid
status: VIRTIO_UNINITIALIZED_EVENTFD and VIRTIO_INVALID_EVENTFD.
Don't set the virt queue to ready status until got the valid
descriptor.
This is safe for polling mode drivers in Guest OS, the backend
vhost process will not post notification to interrupt vector for
PMD mode in Guest, but the interrupt vector still valid.
Change-Id: Icdf1e67f3c4e8da221843eb1383469ca1fba485c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/365327
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We already dereference task in the line above, and all callers ensure
that task is not NULL already.
Change-Id: Iff23503959116083375082b1ab022a156438cc8b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367109
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iee88b34165b3530c52301511ff1bd13c2680ea55
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367123
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1439b471b101b390fcbef558039f2a543f465acd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367121
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Nothing in the spec indicates that NQNs should be case insensitive, and
we have fixed this elsewhere (e.g. commit df70bc1559: "nvmf: use
case-sensitive comparison for NQNs").
Change-Id: I4a48d1c7f25ec5af9ce4d73f1bf2fa543236503a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367106
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If a file is extended and then the new region is immediately
read without being written, there as a math error in the
buffer cache.
Change-Id: Ibd2bbe98c734f98df43eada799ed62de4081964b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/367265
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6010465d573decd93ddf9881392b3d807cd52918
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/366663
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In some cases (for example, Intel VMD or Microsoft Azure), the PCI
domain may be larger than 16 bits. Extend the domain field of struct
spdk_pci_addr to 32 bits to accomodate this.
Note that equivalent changes must be made in DPDK's struct rte_pci_addr
for larger domains to actually work.
Change-Id: I21c4666a68bc8a4aedfcc82b44042c02734246de
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/366520
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Cunyin Chang <cunyin.chang@intel.com>
This can be used by threads within SPDK to undo the
affinitization done either by DPDK (for DPDK lcores)
or by inheriting the parent's thread when using
pthread_create().
This will be used by the stub app to unaffinitize
the reactor core to allow the scheduler to flexibly
move it to an idle core.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7e550953cd9dcd7fd9d98bfbb70660994f2eefcd
Reviewed-on: https://review.gerrithub.io/366680
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is required for using the event framework
in multi-process mode since they must be unique
across the group of processes..
Currently the stub app calls into the env layer
directly, bypassing the event framework, so this
issue would only be seen with multiple secondary
processes using the app framework. Some future
changes will change the stub app to use the event
framework which necessitates this change immediately.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5e1acc95380a20a0204c327906c7ef83a82d7fac
Reviewed-on: https://review.gerrithub.io/366647
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Recent versions of RocksDB have moved the env plugins
to the env/ directory from util/
Change-Id: Ie9478e871e9e656721aa963bc92183636e567f00
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/366699
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
All interactions with the event framework and config file
are now in the event_rpc subsystems.
Change-Id: I3f4ddb79c7ec90ccb9a5eb7b25bc9953fe3e41c8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/366341
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
