It used to be NULL.
Fixes: a85a4452
("bdev_virtio/rpc: add construct_virtio_user_scsi_bdev")
Change-Id: I490b41571e5667cf95b59b2e316006d1ef7381e8
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/383892
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I59cbef4ce1bfe8af113c66c2c9cb9f208440c0aa
Reviewed-on: https://review.gerrithub.io/383887
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make sure the recv() can't write beyond the end of the msg buffer.
Change-Id: Ibc4bb51ac3a1c2a027a458d59356b7a5496eca7e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383646
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Use the correct size types (rather than int) for values passed to and
returned from recv().
Change-Id: I2d38eed63e2d9c9f056d1053e156088fd361c88b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383645
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Add a name to each lvol which is persisted as a blob
xattr. lvol names must be unique within its
lvolstore.
While here, fix a few lvol_ut issues that were caught
as part of testing the lvol unique names. Also fix
a couple of tests that registered the wrong string
name with CUnit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6d24d241e8f52158d14886f928d41823bbc93fa9
Reviewed-on: https://review.gerrithub.io/383567
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There are some upcoming changes which will deprecate
the old lvsuuid_blobid name in favor of an
lvs_name/lvol_name name where these names are
user-specified.
In preparation for this change, rename the previous
lvol->name to lvol->old_name. This will allow us
to add a new lvol->name but keep the original
old_name during the transition.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I10deb219097fa8726c146ab2427ee7373933b97d
Reviewed-on: https://review.gerrithub.io/383534
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Each lvolstore now has a unique name which is persisted to
metadata. Eventually this will provide a friendlier
way to reference logical volumes, in the form
lvolstore_name/lvol_name.
This patch only covers the unique lvolstore name. An
lvolstore may not be created nor loaded if its name
conflicts with an already loaded blobstore.
Currently there is no way to rename an lvolstore to
resolve a conflict. This will be coming in the future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I842f13b79776e5b8f81e56de10778c35328e8cd3
Reviewed-on: https://review.gerrithub.io/383533
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix up the two existing instances of trailing whitespace in text files,
and add a check to enforce that no new trailing whitespace is added.
Change-Id: I2197bed69bb356142aa6d2e4e8261c7434dd358b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383291
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Replace POSIX and standard C #includes with the central SPDK stdinc.h
and remove the rte_virtio exclusion from header checking in
scripts/check_format.sh
Change-Id: Ie53d11de7cd9a51c59957e3c500bd8b9b4c4bc5e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383003
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove the exclusion of the rte_virtio code from scripts/check_format.sh
since we will be maintaining this code going forward (unlike rte_vhost,
which we intend to keep up to date with upstream DPDK).
Change-Id: I30c186e566ca777dff552a36af53443d197a8824
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383002
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If an I/O fails during the write zeroes fallback to write on a split
I/O, the previous code would call spdk_bdev_io_complete() again on the
same I/O, causing infinite recursion.
Fix this by restoring the original user callback before completing the
I/O, as well as using _spdk_bdev_io_complete() rather than
spdk_bdev_io_complete() to avoid double-counting the statistics.
This also preserves the original bdev_io->status code set by the module,
rather than always setting it to SPDK_BDEV_IO_STATUS_FAILED.
Change-Id: Ib71fa6e54eed3d5823652971f7c439e0ff236fc1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383506
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
This patch is a continuation of patch https://review.gerrithub.io/#/c/383252/
on which this series should be rebased. This series introduces
spdk_lvol_open function where reference counter should be also used.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I962db95eaba34c7c18e639076ad86696e8209196
Reviewed-on: https://review.gerrithub.io/383264
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
If we don't delete the super blob, this blob structure
will leak.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I56d0ca4884846aee0c7865f9c600d6c43811373c
Reviewed-on: https://review.gerrithub.io/383311
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
This will be used in a future patch to ensure we do not
allow creating or loading an lvolstore with a names that
matches an already opened lvolstore.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I37e8786f91cd578dd36fbec99ca23609419fc8f8
Reviewed-on: https://review.gerrithub.io/383012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently this is just a free(), but a future patch will
also remove spdk_lvol_stores from a common list.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iff0f14fbe2003448d24f6fb1484f0e95acfe90ff
Reviewed-on: https://review.gerrithub.io/383011
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch introduces lvol store and lvols parameters saving
on persistent memories and loading it from saved data on app start.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia63f0cf3d6365d59f31c5f0a1724636bfe73b5b8
Reviewed-on: https://review.gerrithub.io/375764
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The vhost connection can be closed
concurrently from 2 places:
* the connection thread itself
* rte_vhost_driver_unregister
The connection thread will terminate
the connection if any recv error
occured. The unregister function
will terminate the connection
together with the thread.
However, there is no sychronization
between those two. The connection
thread runs in the background
without any mutex.
The rte_vhost_driver_unregister
now signals the connection thread
to terminate itself and waits
until it's killed.
Change-Id: I012e97ebb8a79edcb2c17c28b2fc7e8041bf92b3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/383085
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
pci_dump_json_config() is used for both legacy and modern PCI virtio
devices, so move it out of the #ifdef PCI_LEGACY_SUPPORT so it is
available when building against older DPDK versions.
Change-Id: I986f9e6a81abda64d77f954b15807d06e35d1748
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383487
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
It is possible that a user will call spdk_bs_unload() with blobs
list not-empty. Instead of just asserting that, now the call fails
with appropriate error.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I83818453d6c90ff9b5bf657c90e12b2f9d5ca013
Reviewed-on: https://review.gerrithub.io/383220
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
17.05-rc4 is the version e.g.
rte_pci_ioport_read function was
introduced in. The bdev_virtio
module previously did not compile
with older DPDK versions.
Change-Id: Ib96d5d7934166acc552515b02bfba25b71929438
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382829
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This was looking at req, but req had already been allocated and checked
for NULl previously; this line was intended to be checking lvol_req.
Change-Id: I8603d35fb4582c109e9d02f4964bbd6d21735324
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383312
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Casting pointers without checking their length could
potentially lead to a crash
Change-Id: I7c61e5818ecfbf32bb363858965503341353c51e
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/382420
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Unmap does not guarantee that erased blocks will return all zeroes.
using write_zeroes when unmapping metadata gives the
desired behavior for a blob.
Only metadata pages will be cleared with write_zeroes in this patch;
blob data clusters will still call unmap. This behavior may be made
configurable in a later patch (to allow the user to request zeroing of
clusters rather than just unmapping).
Change-Id: I1b210abac110867ce703bcfdeb634eb45aa9d5c9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372004
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
if write_zeroes is not supported by the block device, we can get the
same behavior by simply writing a buffer full of zeroes to the blocks
we want to erase. I also incorporate splitting into the bdev layer to
accomodate large i/o.
Change-Id: I8fa1bfaaf22d7bfc6e3afb6e89d22fa9f7767e55
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/373829
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is necessary to avoid failing very large write_zeroes operations.
This is the minimal workaround to get the current bdevio tests to pass -
the real fix will be implemented in the bdev layer later.
Change-Id: I4e49f1b4da5d4c7f9507757d6c71ba3880d22437
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/383306
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There is no need to wait until an atexit() to unlink these - we can do it immediately
since the open refs will still be valid.
Note: changed the remove() calls to unlink() to be more precise, since these are
files and not directories.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib160131bcf3beb9783c6fc4de021f64c43c943a9
Reviewed-on: https://review.gerrithub.io/382697
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
This goes along with previous patch in series.
Adding functionality to remove logical volume store from
device.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6338a35ed02838498a3cd9bb2dddd25803e65f79
Reviewed-on: https://review.gerrithub.io/382020
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently exposed API allows to load/unload and to
initialize blobstore on a device.
A spdk_bs_destroy() call is added in order to reach
functional parity with spdk_bs_init(). It was not
possible to remove blobstore from device from within
SPDK previously.
spdk_bs_destroy() takes blobstore pointer as argument
(instead of bs_dev), because blobstore has to be already
loaded to destroy it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2c493a4407868fcf08fd1766a19fc8463f634ef5
Reviewed-on: https://review.gerrithub.io/382019
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3a86f28056e67b3c237441fb1048ca6ccd081ae7
Reviewed-on: https://review.gerrithub.io/383252
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Close and destroy lvol functions should support callback
functions so that they can be processed sequentially
and also give user result.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I9e87fb281916c65c17b2b7e54e91228844962048
Reviewed-on: https://review.gerrithub.io/383230
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK can now be compiled without
the virtio driver.
Change-Id: I92999c871d28875d519749a73a7f2230c3881fbe
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382828
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We only sync the metadata and data in the runtime of blobstore, which
means we only update the used md bitmap and used clusters bitmap in memory.
if the system crushed, we have no chance to sync the used md bitmap and
used clusters bitmap into disk, then next time when we try to load the
blobstore, all the data will lost, this patch add the logic to recover the
valid data from last dirty shutdown. We will go through all the metadata pages
to find all valid data and rebuild them.
Change-Id: Ieb7c5f932206b1b68fdde0cee35f2d2cb3a4f309
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/376470
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A recent patch did some refactoring on how the superblock is
written out - it introduced a bug where on load we would
write out INVALID for super_blob id and a null bstype when
clearing the clean bit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1d6256e35030645b3e8fda83bfe0f74aeb635733
Reviewed-on: https://review.gerrithub.io/383129
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some future patches will require specifying an lvol_store
name when calling spdk_lvs_init(). This means that passing
NULL for spdk_lvs_opts will no longer be an option. So
add an spdk_lvs_opts_init() (similar to spdk_bs_opts_init)
which will initialize a default value for the cluster size.
While here, prepend an underscore to spdk_setup_lvs_opts, since
this function is not part of the public SPDK API.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I155bcfd0c396017304bb3d58b7511ada71dade17
Reviewed-on: https://review.gerrithub.io/383030
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
init_grp.c has init_grp_destroy() function but does not have
init_grp_create() function. Hence add init_grp_create() function.
init_grp_create() function check duplication of init groups.
Change-Id: I49c64254846ae4edd7a0bb2cf3250fb6f53239f4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/381243
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We interpeted max request queue
count as number of all queues.
It did not take into account
eventq and controlq.
This patch also fixes overall
max_queues negotiation for
modern PCI devices.
Fixes 8b0a4a3 ("bdev_virtio: implement multiqueue")
Change-Id: I834cb973772ca5946ac26d18bd3eeb2783f48ea9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382816
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
It was wrongly assumed that
each READ will contain at least
one iovec. This could potentially
corrupt the desc array.
Change-Id: I48ca7efbe4bea897e0ad16184452bddcf3daf49b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/383009
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Only the initial xmit_pkt is checked
against an error, the subsequent
xmits are just asserted. As scan
messages are sent 1-by-1 if the first
request (containing 3 iovectors) has
been enqueued successfully so should
the next ones.
Change-Id: Ie102256a42ef1c67132d606af90ab96771adba10
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382784
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In case of not enough free descriptors
the bdev_virtio will fail the I/O with
NOMEM status.
Change-Id: I1cb0cd5453ff70468898bc8e414b53b9c64dbe50
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382783
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Previously all bdevs were using
hardcoded name Virtio0.
Change-Id: Ib990027a0edd4e200aa4b6f4689ccb9e0824a9c3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382926
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This doesn't change any behavior
as queue_idx was always either
0 or -1, but makes it clear that
this function always returns
-1 on error. This is required
by current io_channel implementation.
Change-Id: I2b613ab9ff1e48d5b4aee0cd499bbc0a04cb765c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382927
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Always start bdev pollers on the calling core.
This removes the lcore concept from the bdev poller abstraction and
simplifies the job of spdk_bdev_initialize() callers providing their own
poller and event implementations.
All callers except the NVMe bdev hotplug poller already used the current
core as the parameter. The NVMe HotplugPollCore option was undocumented
and unused in any of the tests or example configuration files, so it
should be safe to remove.
Change-Id: I93b466e1e58901b8785c40cbe296fa46c157850f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382857
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A single thread that initialized
bdev_virtio subsystem will be used
to poll control queues for all
virtio devices.
Every io_channel will put it's e.g.
RESET requests to the controlq MP-SC
spdk_ring. The controlq poller will
dequeue these requests and put them
into the virtio queue. The same
poller will then poll for completions
and send them to proper threads
that submitted given requests.
Change-Id: I90ae7c5d76dc89cc52ff69cf2a60e27a9314557c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added a wrapper for rte_ring_count().
Change-Id: Ia12fde3f250604a0f801309ed1c4706a311e7896
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382919
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some error messages were printed
outside of the error-checking
if() condition.
Fixes: bd273d4 ("rte_vhost: replace strerror() with spdk_strerror_r()")
Change-Id: Icf965ae56ffc2e0970572308b38607ac63cdb1f2
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382943
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
