QEMU 6.0 by default uses a RedHat dev/vendor ID rather
than the Intel one that has always been used to date.
We need the NVME_QUIRK_MAXIMUM_PCI_ACCESS_WIDTH quirk
so that we do not use wide instructions to copy SQEs
to a virtualized CMB, since QEMU does not support
that.
The NVME_INTEL_QUIRK_NO_LOG_PAGES quirk is only needed
for devices with SPDK_PCI_VID_INTEL, so we do not need
to carry this one over to the new REDHAT entry.
Fixes issue #1986.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3d339b3525e7c6ceb792eb9d143e7a922c19344d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8226
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The NVMe driver layer will clear this log, so we don't
need to send another one in the aer callback.
Here we change the logic to compare with previous NS
state, if the NS state is same it will fail the test.
Change-Id: I6d80cb6a5f6d5eab92b8ccac601a23c19cea4003
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8175
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
The arguments of a tracepoint are formatted when they're printed now, so
there's no need to append ":" or pad it with spaces.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I74f5568f1982dacc079e3b80bd19a9cd740b48ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7955
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The traces record calls to spdk_(get|put)_io_channel() and saves the
reference count of the IO channel and its context. The context, instead
of an IO channel pointer, was selected because the same pointer is often
used in other traces (e.g. nvmf's poll group), so it makes it possible
to match these traces together.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I15fe982a89685d8f6e23d406d6d48f5c2d9d604b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7232
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Both values should provide similar information, while the qpair can also
be matched to the traces from lib/nvmf allowing the user to track the
qpairs across these modules.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iba9abdd3f41b93100c0403b1c90fc4549d39189e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7159
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The traces are tracking the lifecycle of a poll group: creating it,
adding and disconnecting qpairs, and finally destroying the group.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I075b7f24d14b8fbb42bb18ddd70a668a8bace118
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7158
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Upcoming patches will add accel_fw support for batching this cmd
and then vectored versions later along with accel_perf to exercise
them.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I59f577f4365fbf063d7419cc6052e10c998b58bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8143
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Was using reserved field. Similar fix to what was done earlier
for direct submission of crc32c operation.
fixes#1972
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ie9867e72f60c7f38aa1af0273a036f34580ed4c6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8145
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
To match regular sumission prep function and allow caller to
modify both descriptor and completion structures. Also allows
for more accurate error reporting. Needed for upcoming patch to
fix batch CRC submissions.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4b7b5b24e2f54149b513d4b23ba32f3802aff3e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8144
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Upcoming patches will add support for the idxd engine and
the accel_perf tool. Also following will come vectored support and
batch versions.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7223517a844525ad52ed49d65627b04c3cd9fe7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8141
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Upcoming patches will add support to the accel fw, the idxd engine and
the accel_perf tool. Also following will come vectored support and
batch versions.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ie0fbd4b8da9f727426000898c0b511587adac65b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8139
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
_nbd_fini will make all NBDs into closing state.
remove _nbd_async, beasue it will call asynchronous error.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Ifb873b7f079b735983bdf20c2df652be0a21919f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8035
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
And for some internal functions we need to pass controller
parameter so that we can do vtophys based on transport type.
Change-Id: I3ca4fa162ec9305f62b295ba21f7474c21edfe52
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8031
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We need to wait to process this quirk until after we
have a valid CAP register value. Before this fix,
controllers with this quirk would get their io_queue_size
always capped at 2 (min io queue size) because CAP hadn't
actually been read yet.
Fixes: f5ba8a5e (nvme: add NVME_CTRLR_STATE_READ_CAP)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4df87b5dfb0faa21db5b4cf6fc667d80621d1691
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8211
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
The inline function can also be used in the coming submit request
function.
Change-Id: If4a5511001e6586dbce0978298beddc537f54d8b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8173
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The PCIE and VFIOUSER both can use this function, the only difference
is VFIOUSER should use IOVA=VA to do the vtophys translation, so
here we will move the function to the common PCIe layer as the first
step.
Change-Id: I699edb67a00a2fa534072fc02ac2dd4a27aba8f4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8030
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each time the following file
"/sys/kernel/config/nvmet/subsystems/nqn_name/namespaces/ns_id/enable"
on the target side was changed, the SPDK initiator should receive an
async event (type: SPDK_NVME_ASYNC_EVENT_TYPE_NOTICE, info:
SPDK_NVME_ASYNC_EVENT_NS_ATTR_CHANGED).
But actually not.
Since for SPDK, when target sent the non-first event, the condition
"nvmet_aen_bit_disabled(ctrl, NVME_AEN_BIT_NS_ATTR)" that prevents
target from sending event was matched.
This commit fix this issue by issuing a get_log_page cmd for each async
event received, just as the kernel initiator does.
Fixes#1825.
Signed-off-by: tyler.sun <tyler.sun@dell.com>
Change-Id: I2973470a81893456ca12e86ac390ea1de0eed62c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7107
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Also add scripts/bpf/nvmf.bt to enable and log these
probes.
This patch also adds a script that can generate
a bpftrace script snippet with string maps for
needed enumerations (currently nvmf_tgt_state and
spdk_nvmf_subsystem_state). This allows us to
dynamically generate this from the source code, and
can be extended for other enums we may want to
add in the future.
Thanks to Michal Berger for converting my original
gen_enums.py script into gen_enums.sh!
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iff34a6218aef40055ac14932eea5fc00e1c8bcf5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7194
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This reverts commit 2246a93718.
We are seeing a lot of failure on io_device lookup in the test
pool. These only showed up after this patch was merged and sees
the most likely culprit. Reverting this patch for now while we
continue debug.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2ab098319dfae3a5356eb4fe0dbf9f4af2d2eea5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8199
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use the macros for red black tree provided by Free BSD to speed up
io_device lookup.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: Ib3bd382bbeb610503194e7d7bfd569f60a0d0121
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7894
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The original function will disconnect queue pairs first and then free
controller memory finally, so rename it to vfio_user_destroy_ctrlr().
Change-Id: Idc235e4186bd4164be712fc9d4cda4991efc6248
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7624
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
The coming destroy_ctrlr() function will disconnect
queue pairs and free controller at last, so here
rename the original destroy_ctrlr() to free_ctrlr().
Change-Id: I527b2742142d60b0383be5a12391c77dd50d47a7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7623
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
The original destroy_qp() only release the queue pair
related memory, and free_qp() will be called inside
destroy_ctrlr() function, so also remove one duplicated
line here.
Change-Id: I2a06a6704b514361685068acda4e65ed5d502f0d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
The controller concept in NVMf is like a session, for any
new connection in nvmf_vfio_user_accept() with the endpoint,
we treat it as a new controller, we don't need the `ready`
field in controller to indicate the connection state, we
need the connection state in endpoint, so here just use
endpoint->ctrlr point to indicate the socket connection
is valid or not.
Change-Id: I588dbba7973cb61a1d79d81324a43e052f7dafb0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Adding iov to the spdk_bdev_zcopy_start function enable spdk_bdev_zcopy_start to
be used by transport layers as the iov is owned by the transport command
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I6d2be7f49566048bf25b7711ada8d2fb49fea6ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6816
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
ZCOPY emulation is not required. Modules can check if the bdev module
supports ZCOPY. If not supported the module uses the existing
READ and WRITE operations.
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: Idac0a4d27a79a6c7e567c420e15637e826c347c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6815
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
If a reconnect fails, we restore the original
transport_failure_reason after we're done with
the failed reconnect. Save the original reason
in the qpair itself rather than a local variable,
to facilitate upcoming changes where connect will
be asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I20ff43fc687a379aa5c930e17cf3ff8d730320be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8116
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously we were only checking trtype==PCIE to
determine whether a controller was fabrics. This
skipped the vfio-user case. So use the new
spdk_nvme_transport_id_is_fabrics() API instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I81f26853f44b1c47522ce6354e5aa4a905796bd0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8089
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: Use the new function in order to reduce duplicated code.
Change-Id: Ie848c7586575b3f0bb617d7e767cf459b43d4783
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8174
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Nvme-cli submits a RESCAN IOCTL after a format command to
update any information that may have changed during the
format, such as LBA Format. This patch adds support
for RESCAN by executing nvme_ctrlr_update_namespaces to
update the controller information.
Fixes: #1964
Change-Id: I9f03e00a7f39339947ff02390f69ce806e1cfa0e
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8146
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Rather than to rely on schedulers to access and modify
last_stats values over multiple scheduling periods, move that
operation to event framework.
Providing this to the schedulers in generic manner is better
than enforcing that each scheduler has to keep track of this
data on their own.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Icaf3b4af80d86fafaddf328fd230db9743d21ab5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
A Security Receive command with the Security Protocol field cleared to
00h shall return information about the security protocols supported by
the controller, so we can check the TCG security protocol is supported
or not before sending it.
Fix issue #1961.
Change-Id: Id061defe45db981b276e2794fd0b59f8db70b7f4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Perf improvement, directs DSA to write to cache as opposed to
mem.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I0d6ba157af8f1b54f8aae3b8e54a6f7754e4a9de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8169
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We already keep a list of outstanding completion locations to
poll and were previously polling all of them. New ones are
added at the tail and we poll the oldest first from the head
so if we break when we find a slot that hasn't completed we
can get more work done while the HW finishes. This is a proven
performance improvement in limited testing.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icc15041605586f9a31435d447d253c381c00b1f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8161
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
1. struct pxdcap.per is changed to struct pxdcap.rer
Which matches the name in the nvme spec.
2. use new API return value.
3. update specification changes.
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: Ida421c4cffd1c65d550e83011ab123b321ea9dff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8088
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
vfio-user transport `req_complete` callback will zero the internal
NVMe command and response fields, the common NVMf library should
not use them after the callback, so here we use stack variables
to save them before the `req_complete` callback.
Fix issue #1965.
Change-Id: Iff2342b6095d9496cdf112d657a0a99ce1fb5d12
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8129
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Initialize ANA state of each namespace to optimized regardless of
whether ANA is supported or not. This will simplify the code to get
the optimal I/O path because we do not have to care if the namespace
supports ANA.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I24dfe08674af398671de6528b884e9d82409eeae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7890
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The purpose is to reduce the duplicated code in nvmf and iscsi
layer.
Change-Id: I7e96f0d5bb1ba4b81378addca3cdd929056384e9
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8132
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
We map the SPDK_NVME_TRANSPORT_* values directly to
the NVMe-oF trtype values. Since PCIe isn't
Fabrics, we choose 256 which is outside of the
8-bit trtype range of values.
So we can just check if trtype >= 256 to determine
if the trid is for fabrics or not. This is
preferable to checking PCIE || VFIOUSER in case
additional non-fabrics transport types are added
in the future.
I considered taking a trid as the parameter instead,
but went this route since it is consistent with
the existing spdk_nvme_ctrlr_is_discovery().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib62ff4d30549b2324486c81f2dce67f0f1741e9b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Connect the adminq as part of controller initialization
instead of controller construction.
We never actually 'connected' the adminq for
PCIe or vfio-user transports, since its a nop.
But their connect_qpair transport ops function
is also a nop for the adminq, so it's fine to
generically connect the adminq across all transports.
Note that we cannot read registers (cc or csts)
during controller initialization now until after
the adminq has been connected since reading fabrics
registers depends on a connected adminq. This gets
special cased for now, but eventually reading
cc and csts will need to be part of the state machine
itself to make it asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia5566d7c549d78d24b94ea253df51e697da6237f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
According to NVMe-oF 1.1 spec, it is not a fatal error.
So according to Figure 126 in NVMe Base specification,
we should return "Transient Transport Error".
Change-Id: I601304ae2bb24508882fb1ec8c7e53ec587ab515
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7795
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This ensures the discovery ctrlr initialization is
done the same as normal ctrlrs. This will be
critical as we make the driver fully asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I33c4fd7c82d241c30e7adb89abe79b8088c8776a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8090
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Read CAP (Capabilities) register as part of controller
initialization instead of controller construction.
For now, still read CAP in the pcie and vfio-user
controller construction, since they need the
drstd (doorbell stride) to construct the admin
queue.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I000fe880f2ec0d6de1d565c883d7ea0ae1ac2c81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8078
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Read VS (Version) register as part of controller
initialization instead of controller construction.
This prepares for upcoming changes to make
controller attach fully asynchronous. Since reading
fabrics registers is an asynchronous operation, it
will be easier to read the VS register as part of
controller initialization which operates as an
asynchronous state machine.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I771386dbdf5902633e0d9f91b3b20be98f26fdc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8076
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
