This data structure is not used.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I143fb9256f692d7bd9bb5e14cdc479f64ddcef45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3746
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1. Retrieve actual IBV state when we receive WC with bad status
2. Don't log an error if WC status is IBV_WC_WR_FLUSH_ERR. This
means that we are performing qpair cleanup and this WC is expected.
Change-Id: Id23634092f537861e66ca0f83ab79db9e052507b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3736
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
From the time a shutdown is initiated the controller shall disable
Keep Alive timer.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Id499dabce1913b9da2f0b3fd961fdfc8b621afa9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3462
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
After CC.EN transitions to ‘0’ (due to shutdown or reset), the
association between the host and controller shall be preserved for at
least 2 minutes. After this time, the association may be removed if
the controller has not been re-enabled.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: I4734600067fd4b7306b46f1325fdd5031e81c079
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2984
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This call can be made directly now that
spdk_nvmf_qpair_disconnect is thread safe. It's
actually better that we do it this way, because
the qp destruct call is guaranteed to block until
the ib events associated with it are acknowledged.
this means that by processing the disconnect before
we ack the event, we will have valid memory to do
the atomic checks.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If6882b7dc568fe4c35f4a35375769634326e9d76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3681
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We should use this function as the synchronization point
for all qpair disconnects.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic685ac3481765190cc56eeec3ee24dad52e336c9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3675
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function should be the synchronization point for all
disconnects regardless of whether they begin on the transport,
from an RPC, or in response to application termination.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If3553ab3a9e265b0938c84832cb9f774852d7565
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3674
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
SPDK NVMe-oF controller creates a ANA group for each namespace,
ANA group ID matches namespace ID, and default ANA state of ANA group
is optimized, and the MNAN field is set equal to the NN field.
If a ANA log page contains multiple ANA group descriptors, it has
one or more descriptors will not be 8 bytes aligned. Hence we create
one descriptor and copy it to the ANA log page at a time.
Change count will be supported later.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56ba6aa78983480caa3dfbf22aefc9aeabfd5405
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2920
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
FTL core poller should return SPDK_POLLER_BUSY flag only
when some writes operations were processed.
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Change-Id: I50e2b536fbec819887148cc045d76c5c5d78beb2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3619
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There are 2 messages passed between when
_nvmf_ctrlr_free_from_qpair is executed and when
nvmf_ctrlr_destruct is executed. That leaves time
when the controller->qpair_mask is not a valid
pointer, but it is still in the subsystem
controllers list.
The purpose of this patch is to close that hole.
It is part of a larger series aimed at cleaning up
the controller destruct path.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0c0199c8392ee278f36df56f599beb10e7a46948
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3685
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This API differs from spdk_nvmf_tranpsort_stop_listen in
that it also disconnects the qpairs associated with
that listener.
Change-Id: Iadfc6d2debc0ef8f1a8cd5db4f20168aeae8264d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3279
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the portal group map of the target has a redirect portal,
iscsi_tgt_node_is_moved() fills the buffer by the redirected address
and returns true.
iscsi_op_login_check_target() calls iscsi_tgt_node_is_redirected() before
calling iscsi_tgt_node_access() because login redirection can be
checked before any or after all security check.
If iscsi_tgt_node_is_redirected() returns true, notify login redirection
to the corresponding initiator.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4573a69c0a32eafcfe48080a033c135e127da321
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iscsi_tgt_node_redirect() updates redirect portal of the initial
portal iin a primary portal group for the target node.
Check if the specified portal group is a public portal group and is
mapped to the target node first.
Then if the passed IP address-port pair is NULL, clear the current
redirect setting. Public portal group and private portal group are
clearly separated and redirect portal must be chosen from a private
portal group. Hence this clear method is intuitive and simple.
If the passed IP address-port pair is not NULL, check if they are
valid, and are not in the specified portal group. Then update a
redirect portal of the portal group map.
Finally, send asynchronous logout request to all corresponding
initiators.
Besides, change allocating pg_map from malloc to calloc to initialize
redirect portal.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I79d826663f4c3d5a117add286f133adeb1ce07f5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3222
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All redirect portals in private portal groups are temporary and so they
should be informed only by temporary login redirection response.
Then this patch changes SendTargets operation to return portals only
in primary portal groups.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic62ada749886290df2d1490377cc5ca883b3f47a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3492
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In SPDK iSCSI target, portal group works almost as identifier of
portal.
To support iSCSI login redirection, we need to have two types of
portal groups, public and private portal groups.
We need portals of public portal groups to redirect to a portal in
a private portal groups at login via temporary login redirection
funciton, and we need to make SendTargets return only portals in
public portal groups.
To do these simply, we mark primary or secondary portal group expicitly
at its creation by this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iccf87a4b9dd1f4a8fbb857a399b8f2dbc7c0b3ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3491
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a helper function iscsi_parse_redirect_addr() to validate the
passed IP address-port pair.
iSCSI login redirection will support only numeric IP address and
TCP port, and add AI_NUMERICSERV and AI_NUMERICHOST.
This function is almost same as nvme_tcp_parse_addr() and
nvme_rdma_parse_addr().
Besides, update error log in posix_sock_create() to use
gai_strerror(). gai_strerror() will provide more accurate
information as done by nvme_tcp_parse_addr() and nvme_rdma_parse_addr().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I65c6de81a64dcb26551ce796172d0458e1c298a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3357
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following patch was merged while still having parent one
pointing before SPDK 20.07 release.
(61cd9d) lib/sock: Add option to enable or disable quick ACK
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1cbc0acfdd2a1a5403844167a107e0f63a2e213c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3709
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
TCP delayed ACK can be disabled or enabled by enabling or disabling
quick ACK, respectively.
The recently added spdk_sock_impl_opts is helpful for sock library
to control quick ACK.
Hence this patch adds and uses an option enable_quickack. The option
is effective only for the POSIX sock module.
We have spdk_sock_opts now too but spdk_sock_impl_opts will be better
for this case.
This option is not supported on FreeBSD. FreeBSD users can set the
option globally via sysctl if desired.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic89620267acce5872dc8ecaf7a99bb70ae97e993
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3603
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iSCSI login redirect will change SendTargets. To make the change
easier, factor out sending target portals from iscsi_send_tgts
into iscsi_send_tgt_portals() even if iscsi_send_tgt_portals() is
used only once.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic565421afc9b099a507aac59ef7c741b113efa8b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3443
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously we might have any possibility to need iaddr in
iscsi_send_tgts(), but it is highly unlikely now. Let's remove
the param iaddr from iscsi_send_tgts().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ide3405706b727a9d6ebaa92ed83509196ff675da
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3442
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The upcoming new feature, iSCSI login redirection will requests
connections whose portal group tag matches to logout asynchronously.
Hence add pg_tag to the second parameter of iscsi_conns_request_logout()
and iscsi_conns_request_logout() checks if conn->pg_tag is equal to
the passed pg_tag.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iaea37f28046396404c5b4faed01d748f2944288c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3160
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously we might have any possibility to need conn in
iscsi_append_text(), but it is highly unlikely now. Let's remove
the param conn from iscsi_append_text(). This patch includes a
minor simplification not to use rc but return directly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifa009c1374e878f8d3b9c0043ba0352f59010b59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3157
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Dynamically allocated string is not necessary, and use fixed size
char array for simplification instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iada118fbc81f24d0273269f4980bab28bd9c2c23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3161
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously iscsi_del_transfer_task() and iscsi_clear_all_transfer_task()
were called after SCSI layer completed abort request.
However, SCSI layer waits until all target requests are aborted or
completed anyway.
So the timing to call iscsi_del_transfer_task() and
iscsi_clear_all_transfer_task() were not effective.
Hence for ABORT TASK, call iscsi_del_transfer_task() before
iscsi_op_abort_task(), for ABORT TASK SET and LUN RESET, call
iscsi_clear_all_transfer_task() before iscsi_op_abort_task_set().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7c22b7305499e6e7d7335b7b5616a3abac0252c4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3149
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To eliminate the cache issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Id67fabb901de9666e6bad04c9df74a538bdbc659
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3662
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Sun Zhenyuan <sunzhenyuan@baidu.com>
Purpose: To make the pdu management consistent with other PDUs, then
we can easily adapt our code into some hardware offloading solution.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ic4a2847fd1b6cacda4cbaa52ff12c338f0394805
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3588
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
RDMA target can't handle bidirectional xfer type, in debug build
it throws an assert in nvmf_rdma_setup_wr function. NVMF controller
performs checks od opcodes, but the failure happens before this
check. Add similar validation in TCP transport.
Change-Id: I14400b9c301295c0ae1d35a4330189d38aeee723
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3436
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The variable can't be uninitialized, but gcc complains:
json_config.c:415:3: error: ‘params_len’ may be used uninitialized in
this function [-Werror=maybe-uninitialized]
spdk_json_write_val_raw(w, cfg.params->start, params_len);
Change-Id: I845dcc19fa18c3583c420e66c16c11a3fdf99ad4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3626
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The way this is written currently, there is a
(very very unlikely) chance that the first strdup
fails and the second one succeeds. Just clean that
up.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I5ca1106c713753448a2bf988166a2d79ab9fa86d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3610
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
CC.EN, CSTS.RDY should not be modified during shutdown.
It doesn't make much sense (against nvme spec) and nvmf spec 1.1
doesn't mentioned it (4.6) either.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I7014b10b0217db61c3d380d5c0843808e54577cd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3477
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When config entry fails spdk_json_decode_object(),
that basically means incorrectly formatted JSON config.
Decode object is simple enough here - 'method' and optional 'params'.
Before this change SPDK_ERRLOG printed garbage, rather than JSON
object that failed the decode.
We actually should not do it at all:
- the object is not formatted right already
- it might be the last object, so spdk_json_next() won't work
It was not usefull, so this patch removes it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ife67ac0d9a1a66d567bfbdd5896e893f3e8cb3ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3257
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Not all JSON methods require 'params' field to be supplied.
Verification of the JSON is done on server side in
parse_single_request().
We should not attempt to process garbage values on correct
JSON config file during app start.
Segfault can be observed if following valid JSON config is supplied:
{
"method": "framework_wait_init"
}
Resulting in:
json_config.c:388:13: runtime error: applying non-zero offset 18446744073709551600 to null pointer
AddressSanitizer:DEADLYSIGNAL
=================================================================
==3386067==ERROR: AddressSanitizer: SEGV on unknown address (pc 0x0000007260ff bp 0x7ffe6ea06890 sp 0x7ffe6ea067e0 T0)
==3386067==The signal is caused by a READ memory access.
==3386067==Hint: this fault was caused by a dereference of a high value address (see register values below). Dissassemble the provided pc to learn which register was used.
#0 0x7260ff in app_json_config_load_subsystem_config_entry /home/tzawadzk/spdk/lib/event/json_config.c:391
#1 0x7cbb13 in msg_queue_run_batch /home/tzawadzk/spdk/lib/thread/thread.c:505
#2 0x7cd00a in thread_poll /home/tzawadzk/spdk/lib/thread/thread.c:581
#3 0x7cfe18 in spdk_thread_poll /home/tzawadzk/spdk/lib/thread/thread.c:689
#4 0x71d6ef in _reactor_run /home/tzawadzk/spdk/lib/event/reactor.c:326
#5 0x71eb00 in reactor_run /home/tzawadzk/spdk/lib/event/reactor.c:382
#6 0x71f911 in spdk_reactors_start /home/tzawadzk/spdk/lib/event/reactor.c:477
#7 0x718237 in spdk_app_start /home/tzawadzk/spdk/lib/event/app.c:691
#8 0x407e94 in main /home/tzawadzk/spdk/app/spdk_tgt/spdk_tgt.c:120
#9 0x7f0f2eef2041 in __libc_start_main ../csu/libc-start.c:308
#10 0x4079ad in _start (/home/tzawadzk/spdk/build/bin/spdk_tgt+0x4079ad)
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7ef1a764467817ad788fdf5dbe17eaeb99dcc22e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3256
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This becomes a problem when the qpair is reconnected.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I6677b396cf766684a4891ffbee93aa3e4e83374d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For some other reason when the host didn't have a block
device e.g: "Nvme0n1", we will call exit(1) directly in
the process, the ASAN will report memory leak issue, so
before exiting the process, we call spdk_app_stop to
do the cleanup.
Fix issue #1422.
Change-Id: I7b7a05807625586bd5b97dc31f41e2b86e1b323f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3586
Community-CI: Mellanox Build Bot
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we don't resubmit receive request associated with AER
request to SRQ. This leads to reducing of SRQ elements and may
lead to non responsive NVMF target.
Fixes#1507
Change-Id: Ie96f8c4be0202ae973e561ebe5ea28688a6a3b72
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3558
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
During virtio_pci_dev_probe, if enum_cb fails, hw needs
to be released. But in bdev_virtio, if vdev fails after
initialization, it will enter the bdev destruction process
which call the modern_destruct_dev function and hw will
be released during the process. So we will encounter the
problem of hw being released twice.
Change-Id: Ifba35284c072355ba0e10428b597a1894d32d59e
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3564
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
