Also, since this was the last operation using src, remove this field
from spdk_accel_task.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I55fd98697ef4f92a13dd0563b4adf9ccb0af171b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Implement the resize function for RAID0. raid0_resize() calculate the
new raid_bdev's block count and if it is different from the old block
count, call spdk_bdev_notify_blockcnt_change() with the new block count.
A raid0 bdev always opens all base bdevs. Hence, if the size of base
bdevs are reduced, resize fails now. This limitation will be removed
later.
Add a simple functional test for this feature. The test is to create
a raid0 bdev with two null bdevs, resize one null bdev, check if the
raid0 bdev is not resize, resize another null bdev, check if the raid0
bdev is resized.
test/iscsi_tgt/resize/resize.sh was used a reference to write the test.
Using jq rather than grep&sed is better and hence replace grep&sed by jq
of test/iscsi_tgt/resize/resize.sh together in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I07136648c4189b970843fc6da51ff40355423144
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Recent changes done to iobuf and accel framework
require us to adjust iobuf pool sizes when running
tests with high number of VMs and Vhost controllers.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I1a445379e755939875aebe97a6360ec0b0586287
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16267
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fuzzer logs may become huge, it's better to store it as file.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: Ia85eb88fd648dc2fb90f5a3bd389e6df2ef0106e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15365
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Keep corpus directory that trigers new code coverage.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I2a5154472588669fddd87c97cc952da1a92ae0ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Also, make it possible to remove copy operations following a fill
operation if they're using the same buffers.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7da195ce80650a02c5db99d9400ee692f797b1f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15940
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Some of the copy operations can be elided, so they're not the best for
this kind of test. So, use another operation, decompress, that can be
appended to an accel sequence.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic59e7678436bdf1d5ab6eb103de4cc0c0c347b9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also, replace src2 with an iovec + iovcnt and rename it to s2 to
keep the naming consistent with the source buffer (s).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I44787128377addd514818ec5aaec084b1a31f0c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15939
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also, replace dst2 with an iovec + iovcnt and rename it to d2 to
keep the naming consistent with the destination buffer (d).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib394c127eeb5890451535ff485f96f7edd2897a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This patch is first in the series of patches aimed to make all accel
operations describe their buffers with iovecs. The intention is to make
it easier to handle tasks in a generic way.
It doesn't mean that we change the API - all function signatures are
preserved. If a function doesn't use iovecs, we use the aux_iovs array.
However, this does mean that each accel module that provides support for
a given operation will need to be adjusted to use iovecs.
Additionally, update the unit test checking copy elision to verify the
buffers of the copy operation that is left.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I9e6d8d1be3b8b9706cb4a6222dad30e8c373d8fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Users can now specify buffers allocated through `spdk_accel_get_buf()`
when appending operations to a sequence. When an operation in a
sequence is executed, we check it if it uses buffers from accel domain,
allocate data buffers and update all operations within a sequence that
were also using those buffers.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I430206158f6a4289e15f04ddb18f0d1a2137f0b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15748
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
It's common to set up an iovec around a single buffer; add a helper for
this.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ic4183e29d78549ec102045c6af0b5ff448cb5c59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
And use it in a couple of places.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I4b86cef0e9489c1435c0206dd6c5cda4ffe4d33a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
When a buffer is get, it does not need to reserve the space
for tailq header.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I0aa2d77739fbb86a6e2df1c00a772aff1cb7c6e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16181
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In order to connect to a zoned SPDK NVMe-oF target the ZNS specific
identify functions must be implemented and the supported ZNS opcodes
must be set accordingly.
Implementing ZNS specific identify functions to return the 'I/O Command
Set specific Identify Namespace data structure (CNS 05h)'
(`spdk_nvmf_ns_identify_iocs_specific`) and 'I/O Command Set specific
Identify Controller data structure (CNS 06h)'
(`spdk_nvmf_ctrlr_identify_iocs_specific`).
Those functions return a null filled data structure for any I/O Command
Set other than ZNS.
Signed-off-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Change-Id: I6b9529ce0a86400afb01d4e09cbdb3e5c3a68514
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16044
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously we use 1024MiB static memory for bdevperf, but it may invoke
DPDK dynamic memory allocation when calling `spdk_zmalloc`, and this
part of new memory region isn't registered to remote target process,
vfio-user like solution is designed for pre-allocated memory, so here
we can increase the static memory size as a workaround.
Also add debug log when testing.
Fix issue #2846.
Change-Id: I509093a12a63db2c9e9797da10eab9b5ee0b3aac
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16141
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reduce connect-disconnect iterations to 5 to
save execution time. 5 should be enough for a
basic test which is significantly extended in
nightly version.
Change-Id: I44549ccb96f69e925471acc91a1704a0b9e61d2b
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16212
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Branch `vfio-user-patch1-noreq` is recommended to use for VFIO-USER
VM test cases now.
Change-Id: I8550d995795d923483877d9a81063f198a65d74a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15914
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We're not doing any type of "negative" testing here
so we don't expect "nvme disconnect" to fail in
these tests so that would be neccesary to mask it.
Change-Id: Id8ae8706d33f1db74f5e5da811bb542859b55c44
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Running 20sec workload multiple times in the test
takes some time. Reduce the run times to shorten
the execution.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I4ecfa9d48f7ccaabb2a3707093da7662b5e5e807
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16214
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This should save a few seconds of execution time.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I96ade7da77ee9031fc20e7d93d3ab130b9d9be1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16213
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Use lightweight workload test cases in VM for the purpose
to keep number of dirty pages is in low rate of VM's total
memory.
Fix issue #2805.
Change-Id: I52efd0d0522ccef713ba2c3a451daac0683234dc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15954
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When an I/O gets an I/O error, the I/O path to which the I/O was
submitted may be still available. In this case, the I/O should be
retried to the same I/O path. However, a new I/O path was always
selected for an I/O retry.
For the active/passive policy, the same I/O path was selected naturally.
However, for the active/active policy, it was very likely that a
different I/O path was selected.
To use the same I/O path for an I/O retry, add a helper function
bdev_nvme_retry_io() into bdev_nvme_retry_ios() and replace
bdev_nvme_submit_request() by bdev_nvme_retry_io(). bdev_nvme_retry_io()
checks if nbdev_io->io_path is not NULL and is available. Then, call
_bdev_nvme_submit_request() if true, or call bdev_nvme_submit_request()
otherwise. For I/O path error, clear nbdev_io->io_path for
clarification. Add unit test to verify this change.
Linux kernel native NVMe multipath already takes this approach. Hence,
this change will be reasonable.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I7022aafd8b1cdd5830c4f743d64b080aa970cf8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16015
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Richael <richael.zhuang@arm.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following patches will change I/O retry to use the same io_path if
it is still available. However, bdev_nvme_submit_request() always calls
bdev_nvme_find_io_path() first. For I/O retry, if possible, we want to
skip calling bdev_nvme_find_io_path() and use nbdev_io->io_path instead.
To reuse the code as much as possible and not to touch the fast code
path, factor out request submit functions from
bdev_nvme_submit_request() into _bdev_nvme_submit_request().
While developing this patch, a bug/mismatch was found such that
bdev_io->internal.ch was different from ch of
bdev_nvme_submit_request(). Fix it together in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Id003e033ecde218d1902bca5706c772edef5d5e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16013
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
From Qemu 7.2 slirp submodule has been removed from the Qemu source tree
which affects "-net user" in vhost-vs-qemu tests
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I2ab69dc8eccafe3649bf1c67f8dd310585c50eaa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15894
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
- Move "run_test" entries around so that target
and hosts tests are grouped
- Add missing timing start & exit directives for
target tests
- Further move tests around to group them by
matching SPDK_TEST_* flags
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If1decd49ffbf2d1fffac60e55b506002a2107d7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16210
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe-oF initiator in recent kernel versions takes
considerably less time than when the "sleep 4" was
introduced, as described in:
https://github.com/spdk/spdk/issues/2467
This effectively reverts:
dacd8ec827
Change-Id: Ib678d99c330c739788a5d6aaeabd23cb2c9017ef
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15989
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The new module replaces functionality in vbdev_crypto.
This module is bdev agnostic, so some inernal parts
were reworked.
io_channel: contains a qp of every configured DPDK PMD
crypto key: for mlx5_pci we register a key on each available
device since keys are bound to Protection Domain.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: If1845cb87eadacbb921c593ba82207a97f2209a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14859
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This patch is just a copy of vbdev_crypto.c and the
corresponding UT file. It makes it easier to review
the next patch which adds accel operations
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Ib88b45d573b011b1acb35da9bf4dab922d8fb183
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16182
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
* generic metadata support for raid modules
* raid is not created when metadata formats for base bdevs differ
Signed-off-by: Krzysztof Smolinski <krzysztof.smolinski@intel.com>
Change-Id: Ifaf9cfc4f2472c3820da1070deda758c5334edb2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13549
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Skip CentOS8 and Rocky8 as packages are
not available in default system repositories.
Change-Id: I4e957444aec1745872f5d6cc1cd9bdec792ac400
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15986
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: <qun.wan@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Error counters for NVMe error was added in the generic bdev layer but
we want to know more detailed information for some use cases.
Add NVMe error counters per type and per code as module specific
statistics.
For status codes, the first idea was to have different named member
for each status code value. However, it was bad and too hard to test,
review, and maintain.
Instead, we have just two dimensional uint32_t arrays, and increment
one of these uint32_t values based on the status code type and status
code. Then, when dump the JSON, we use spdk_nvme_cpl_get_status_string()
and spdk_nvme_cpl_get_status_type_string().
This idea has one potential downside. This idea consumes 4 (types) *
256 (codes) * 4 (counter) = 4KB per NVMe bdev. We can make this smarter
if memory allocation is a problem. Hence we add an option
nvme_error_stat to enable this feature only if the user requests.
Additionally, the string returned by spdk_nvme_cpl_get_status_string()
or spdk_nvme_cpl_get_status_type_string() has uppercases, spaces, and
hyphens. These should not be included in JSON strings. Hence, convert
these via spdk_strcpy_replace().
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I07b07621e777bdf6556b95054abbbb65e5f9ea3e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15370
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
spdk_nvme_cpl_get_status_string() returns a string which contains upper
cases, spaces, and hyphens. To use the returned string for JSON RPC, we
have to convert it to a string which contains only lowercases and
underscores.
For our convenience, add a new API spdk_strcpy_replace() to replace
all occurrences of the search string with the replacement string.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I3ca9774d0bfb2d0bb7bd7412bc671e6f69104b7d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16054
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fedora37 has iproute version 5.18.0 in the
repository which does not include "tc" in it.
This tool in newer versions of iproute is in a
separate package "iproute-tc" and is not installed
by default.
"tc" is used in ADQ tests for e.g. creating traffic
classes or filters.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I9456d80de1b23a66c508f466dfb93f9b86d4c9e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16126
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
- The test "sma_vfiouser_qemu" by SMA requires
"--with-vfio-user" to be enabled
Signed-off-by: Xin Yang <xin.yang@arm.com>
Change-Id: I866cb99ae5519c12a4be44c5fcfee8fd8b4442a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15979
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Yibo Cai <yibo.cai@arm.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The QEMU binary is configured in the CI configuration file, so
we don't need to set it in the script now.
Change-Id: I6d0f4092f7a15bda5718f60c9a3b42f7127a9807
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15913
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added num_outstanding_reqs in struct spdk_nvme_qpair to record outstanding
req number in each qpair. This can be used by multipath to select I/O
path.
Increment num_outstaning_reqs when req is removed from free_req queue and
decrement it when req is put back in free_req queue.
Change-Id: I31148fc7d0a9a85bec4c56d1f6e3047b021c2f48
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_crypto uses memset() to zero secrets passed
by the user (cleanup/error path) which is not safe -
compiler may detect that the buffer being zeroed
is not accessed any more and may "optimize" (drop)
zerofying.
C11 standard introduces memset_s which guarantess to
change the buffer content, but this function is optional,
gcc may not support it. As alternative, add not optimal
from performance point of view default implementation.
Add unit test to math_ut.c to avoid creating new .c file
for 1 simple test
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I11c7d15610df02e4a3761a88c85f6f8c54fb4b0a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16038
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Attribute base_bdevs_max_degraded of raid_bdev_module struct is
replaced with more generic structure allowing implementation of
raid levels for which constraint is by number of operational
drives instead of maximum number of failed drives.
Signed-off-by: Krzysztof Smolinski <krzysztof.smolinski@intel.com>
Change-Id: Ie7079993d27d32118b865c3aabd92252a2807b94
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14411
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Use improved bdev_raid_get_bdevs RPC to verify more raid bdev
properties.
Change-Id: Ic2ca95324816642bbcc04237c6d481f2f4b7773c
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15309
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It will be used for allocating buffers from accel domain and
allocating bounce buffers to push/pull the data from memory domains for
modules that don't support memory domains.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Idbe4d2129d0aff87d9e517214e9f81e8470c5088
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15745
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This domain is meant to represent data being transformed by accel
engine. Users will be able to allocate buffers from that memory domain
and use them when appending operations to an accel sequence.
Since these buffers are only meant to be used as placeholders for actual
buffers, none of the push/pull/translate callbacks are implemented. To
access the data after it was transformed by accel, users should make
sure that the final command's destination buffer isn't allocated from
accel memory domain.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia031c7b205e98792d0a93f01513101b86afa9faa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15744
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reversing a sequence means that the order of its operations is reversed,
i.e. the first operation becomes last and vice versa. It's especially
useful in read paths, as it makes it possible to build the sequence
during submission, then, once the data is read from storage, reverse the
sequence and execute it.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I93d617c1e6d251f8c59b94c50dc4300e51908096
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15636
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Operation sequence should always be treated as a whole, meaning that
users cannot rely on the contents of any intermediate buffers and should
only care about the buffer that's the destination of the whole
operation. This allows us to remove some of those copy operations by
changing source / destination buffer of a preceding / following
operation.
If a sequence is using buffers from non-local memory domain, users can
append a copy operation to a sequence to specify a local destination
buffer. If the module executing the operations is aware of memory
domains, this can avoid doing an extra spdk_memory_domain_pull_data().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I93b94d46ee32700819e9e6f1c55350692db8a67a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15530
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This patch introduces the concept of chaining multiple accel operations
and executing them all at once in a single step. This means that it
will be possible to schedule accel operations at different layers of the
stack (e.g. copy in NVMe-oF transport, crypto in bdev_crypto), but
execute them all in a single place. Thanks to this, we can take
advantage of hardware accelerators that supports executing multiple
operations as a single operation (e.g. copy + crypto).
This operation group is called spdk_accel_sequence and operations can be
appended to that object via one of the spdk_accel_append_* functions.
New operations are always added at the end of a sequence. Users can
specify a callback to be notified when a particular operation in a
sequence is completed, but they don't receive the status of whether it
was successful or not. This is by design, as they shouldn't care about
the status of an individual operation and should rely on other means to
receive the status of the whole sequence. It's also important to note
that any intermediate steps within a sequence may not produce observable
results. For instance, appending a copy from A to B and then a copy
from B to C, it's indeterminate whether A's data will be in B after a
sequence is executed. It is only guaranteed that A's data will be in C.
A sequence can also be reversed using spdk_accel_sequence_reverse(),
meaning that the first operation becomes last and vice versa. It's
especially useful in read paths, as it makes it possible to build the
sequence during submission, then, once the data is read from storage,
reverse the sequence and execute it.
Finally, there are two ways to terminate a sequence: aborting or
executing. It can be aborted via spdk_accel_sequence_abort() which will
execute individual operations' callbacks and free any allocated
resources. To execute it, one must use spdk_accel_sequence_finish().
For now, each operation is executed one by one and is submitted to the
appropriate accel module. Executing multiple operations as a single one
will be added in the future.
Also, currently, only fill and copy operations can be appended to a
sequence. Support for more operations will be added in subsequent
patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id35d093e14feb59b996f780ef77e000e10bfcd20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15529
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
According to the current SPDK tests results, bpftrace under
the F37 is struggling with segmentation fault issues with
the newest versions (0.15.0/0.16.0).
See: https://github.com/iovisor/bpftrace/issues/2420
Fixes are in master branch. Waiting for the next
bpftrace release.
Linked to: https://github.com/spdk/spdk/issues/2833
Also, the bcc has been removed as we can use build-libs.sh
script that prepares necessary libraries built in the
bpftrace tree. Bpftrace has bcc as submodule that points
to version later than 6dac27d9, which we needed to use
previously.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I3de292cc0050dc32592076280c5e72be5e879cbe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16024
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add a simple case for RPC accel_assign_opc and
RPC accel_get_opc_assignments.
Change-Id: I14e00bef4fd6df85808b024a6398c037ec80bd9a
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15678
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This code has a similar potential problem as the identify
and log page commands did: stop using req->data in favour of IOVs.
We also need to fix the unit tests to initialize the iovs.
We don't change the existing "set" behaviour of requiring a single IOV
here.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I257567a7abd5fc3ed9ee21b432c7da7d70fbbde0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16122
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add a define for the Identify command buffer instead of using a raw
value.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I9073ff84e2fa2ef9268051b898fe1027d8e97baa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16119
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
In preparation for supporting additional claim types, create a claim
type that represents the current claim type. Everything that sticks to
the public APIs should continue to work as before.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I0d02e4b3f4bbf4eb5a7391028aa31e999f9da915
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15286
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In preparation for an updated claims API, refactor
bdev->internal.claim_module into a union that will eventually hold
different information based on the the type of claim.
Change-Id: I7ade6f03128bdb0f8375a95ae953cb63d6aa686d
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15285
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
This updates the way that the bdev_ut examine callbacks are called such
that tests can specify test-specific examine_config and examine_disk
callbacks. A test is added that uses this to verify that no locks are
held while examine callbacks are called.
Change-Id: Ic1a402a0edc17aeb9cd596e1f6822af9f59c7d5b
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15283
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
This introduces a deprecation for calling spdk_bdev_register() and
spdk_bdev_examine() on a thread other than the app thread. The
deprecation period starts in SPDK 23.01 and removal is expected in SPDK
23.05.
The intent of this deprecation is to ensure that bdev modules'
examine_config() and examine_disk() callbacks are only ever called on
the app thread. This largely a formalization of what has long happened
due to the RPC poller running on the first thread started by
spdk_app_start().
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ic9d7b87b6522be20357d2eab2d0c77cd5753452f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
We currently use a hack AllowDuplicatedIsid with the
iSCSI target to allow running multiple Calsoft tests
in parallel, since each Calsoft test always uses the
same InitiatorName.
But this causes some tests to intermittently fail,
likely due to changed behavior with many sessions
sharing the same InitiatorName. The problem is
very difficult to reproduce, and made worse since
the Calsoft tests themselves are binary only.
So instead split the tests into two sets - one set
contains nopin-related tests which each take longer
to run due to various interval expirations needed for
the test. There are just a few of these tests, and
do not appear to ever cause an intermittent failure,
so we run these in parallel. The rest are all run
serially and run rather quickly.
Fixes issue #2416.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0bd29da8a71d4c7593bba11f1e2f2e11e2289d8a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16022
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Test scripts need to call iscsitestinit to enable
--iso mode - so call it from calsoft.sh like we
do for other test scripts.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibdf1789f76d75ff3dfd317c333524337d34c579c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15971
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
QEMU is fully capable of unlinking its own pidfile so it may happen
that after sending a signal to terminate it, the file is already gone
when we attempt to rm it - in such a case, rm fails leading to overall
test failure. Avoid that by allowing QEMU to do its job.
For cases where QEMU might have potentially failed (e.g. due to a crash)
we leave the rm in with an extra -f on its cmdline.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ia8d5c73dd76225583a63c1f622835e22ce32e66c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16040
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When merging data from one spdk_histogram_data to
another, the merging is only valid if the bucket_shift
for each structure is the same. Otherwise we are
combining data points that cover different ranges
of values.
So check that the bucket_shifts are the same before
merging. Change the return type to int to
return -EINVAL if structures with different
bucket_shifts are attempted to be merged.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If98e2d03384d85f478965956da2a42cfcff4713d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15813
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Many parts of the blobstore.c seem to have gone with the assumption that
blob creation, deletion, etc. all happen on the md thread. This
assumption would allow modification of the bs->used_md_pages and
bs->used_clusters bit arrays without holding a lock. Placing
"assert(spdk_get_thread() == bs->md_thread)" in bs_claim_md_page() and
bs_claim_cluster() show that each of these functions are called on other
threads due writes to thin provisioned volumes.
This problem was first seen in the wild with this failed assertion:
bs_claim_md_page: Assertion
`spdk_bit_array_get(bs->used_md_pages, page) == false' failed.
This commit adds "assert(spdk_spin_held(&bs->used_lock))" in those
places where bs->used_md_pages and bs->used_lock are modified, then
holds bs->used_lock in the places needed to satisfy these assertions.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I0523dd343ec490d994352932b2a73379a80e36f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15953
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
In DPDK 22.11 rte_cryptodev_sym_session_create() now takes
a single mempool with element size big enough to hold session
data and session private data.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6c9db063825843a903d1ff84dd8d77f198a841a1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15435
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Adjusts use of rte_crypto API after DPDK patch below:
(bdce2564dbf78e1fecc0db438b562ae19f0c057c)
For DPDK 22.11 and later, rte_cryptodev_sym_session_init()
is no longer used and only calling
rte_cryptodev_sym_session_create/free().
Change-Id: I89d8fa737fd6c199a4a5a810b85d6d5b79d5d27b
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Cipher keys in sma are encoded by base64 that by default wrap line
after 76chars. It causes issues for 256bit keys in sma flow.
Adding "-w 0" disables line wrapping
Signed-off-by: Michal Rozegnal <michal.rozegnal@intel.com>
Change-Id: Ic6a8136672b1cdbd8d71d3cc1caa82a5bc898636
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15888
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: <sebastian.brzezinka@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It makes it possible for stateless clients to send CreateDevice /
DeleteDevice each time a volume is attached / detached. Deleting a
device with attached volumes results in FAILED_PRECONDITION error, which
a client can simply ignore. The device will be deleted during the final
DeleteDevice call, once all volumes are detached.
We limit this behavior to device types that support AttachVolume /
DetachVolume methods, otherwise it would be impossible to delete such
devices.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I244b2b09455ec1430970c70f3fbb739cc9069754
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15670
Reviewed-by: Jing Yan <jing1.yan@intel.com>
Reviewed-by: Filip Szufnarowski <filip.szufnarowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The internal mempools were replaced with the newly added iobuf
interface.
To make sure we respect spdk_bdev_opts's (small|large)_buf_pool_size, we
call spdk_iobuf_set_opts() from spdk_bdev_set_opts(). These two options
are now deprecated and users should switch to spdk_iobuf_set_opts().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib1424dc5446796230d103104e272100fac649b42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
It will allow us to add extra (de)initialization steps to be executed
before / after each unit test.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic3c644e893e4fdb368723c120b23f18cd752db70
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We don't need to create as many devices to fully populate two buses, we
can create 32 devices on the first bus and 1 device on the second one
and basically test the same thing, while allocating less resources at the
same time.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ibaca094f71f3702f8d58f5feb54b676df749ff49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15645
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This gives us a place to initialize iobuf pools, specify subsystem
dependencies, and execute RPCs to configure the sizes of the pools.
We allow users to configure the size of the pools either through the
options in spdk_bdev_opts or through the new RPC, iobuf_set_options.
The second option has higher priority, so it will override the options
set by the bdev layer.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7c45ace04bc71c8343658f98248fc7babcf24e5d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15765
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Users can now specify a number of small/large buffers to be cached on
each iobuf channel. Previously, we relied on the cache of the
underlying spdk_mempool, which has per-core caches. However, since iobuf
channels are tied to a module and an SPDK thread, each module and each
thread is now guaranteed to have a number of buffers available, so it
won't be starved by other modules/threads.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1e29fe29f78a13de371ab21d3e40bf55fbc9c639
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15634
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The idea behind "iobuf" is to have a single place for allocating data
buffers across different libraries. That way, each library won't need
to allocate its own mempools, therefore decreasing the memory footprint
of the whole application.
There are two reasons for putting these kind of functions in the thread
library. Firstly, the code is pretty small, so it doesn't make sense to
create a new library. Secondly, it relies on the IO channel abstraction,
so users will need to pull in the thread library anyway.
It's very much inspired by the way bdev layer handles data buffers (much
of the code was directly copied over). There are two global mempools,
one for small and one for large buffers, and per-thread queues that hold
requests waiting for a buffer. The main difference is that we also need
to track which module requested a buffer in order to allow users to
iterate over its pending requests.
The usage is fairly simple:
```
/* Embed spdk_iobuf_channel into an existing IO channel */
struct foo_channel {
...
struct spdk_iobuf_channel iobuf;
};
/* Embed spdk_iobuf_entry into objects that will request buffers */
struct foo_object {
...
struct spdk_iobuf_entry entry;
};
/* Register the module as iobuf user */
spdk_iobuf_register_module("foo");
/* Initialize iobuf channel in foo_channel's create cb */
spdk_iobuf_channel_init(&foo_channel->iobuf, "foo", 0, 0);
/* Finally, request a buffer... */
buf = spdk_iobuf_get(&foo_channel->iobuf, length,
&foo_objet.entry, buf_get_cb);
...
/* ...and release it */
spdk_iobuf_put(&foo_channel->iobuf, buf, length);
```
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifaa6934c03ed6587ddba972198e606921bd85008
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15326
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This check was put in place as a workaround for some specific kernel
builds which were mainly shipped under centos8. Since we already
dropped centos8 in the CI and replaced it with rocky8 (where kernel
is actually stable) there's no value in maintaining that anymore.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Idd39b5bae888a991d7d628a19bc18acac6570f81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15819
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
There may be some timing issue where attempt to rebind the ctrl from
vfio_pci driver back to nvme, right after issuing the
bdev_nvme_detach_controller() call, fails as the vfio_pci might have
not fully released the device yet.
To mitigate, simply kill the application (as it's not needed anymore
at at point) before starting the kernel_target test - this should give
enough time for the device to be properly released.
As a precaution, make setup.sh to retry the probe attempt in case it
fails.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ifc4f4c18a90605154bf33b078575c8b41129f1f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15767
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Found with misspell-fixer.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If062df0189d92e4fb2da3f055fb981909780dc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15207
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using new_id attribute is global in scope, meaning that depending
on the kernel's setup seen prior running setup.sh, single write
to it may re-bind ALL matching devices. This doesn't play well
with our PCI_{ALLOWED,BLOCKED} options as they can't be enforced
in such a case. Consider the following example:
> modprobe -r nvme # all nvme ctrls are detached from the kernel
> echo 0xdead 0xbeef >/sys/bus/pci/drivers/uio_pci_generic/new_id
# setup.sh-wise
> modprobe -r nvme
> PCI_BLOCKED=some:dead:beef.bdf setup.sh
# PCI_BLOCKED device still ends up bound to userspace driver.
After this single write, ALL matching devices will end up bound to
uio_pci_generic. To avoid this, we should override preferred driver
on per-bdf basis.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ic4613e33321303b92b47ce3f4d7e1f29ecca3036
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13813
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
recently introduced: 0af934b38c
by default disallows multiple SPDK applications
from running on overlapping CPU masks.
This test was overlooked during initial adjustment
of CPU masks in our scripts. This patch aims to remedy
that issue.
Change-Id: I7e4a7f6a53119a97a138b191e4511d94c351ff9b
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15456
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
As we are using spdk-abi repo to compare SO files, we do not
need newer images to prepare serialized spdk releases inside VM.
For release tests (22.01, 22.09), let's use the older images,
e.g. Fedora 35
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ief8f2b1a25e642f3cbe9e3038ba39e634cbf0c5e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15788
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is in prep for adding a new compressDev accel_fw
module that will contain all of the DPDK compressDev specifics
on it, the vbdev will make calls to the accel_fw instead.
As the accel_fw has SW based compression, we want the configure
option to apply to building the vbdev module but not the accel_sw
software implementation or the upcoming compressdev module.
Renamed to "compress" as reduce is a term specific to the vbdev
implementation of the compression to be provided by the accel_fw
and thus the same reason why we leave the test flag called REDUCE
because it's controlling tests for the reduce library as well as
the vbdev module that is using reduce. The flag does not apply
to the SW implementation of compression.
This does not affect upcoming accel_fw compressdev module, that
will have its own configure option.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: If8ed3e48e1e3dabcaad1cd161289e78122cd9d58
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15179
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
In the following patches, nvme_rdma_poll_group_set_cq() will
touch not only CQ but also SRQ and receive WR objects.
All these resources are of a poller.
Hence for clarification, rename nvme_rdma_poll_group_set_cq()
by nvme_rdma_qpair_set_poller().
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic59ba5a45833e39b1b2647c000c8b953f1031d6b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
In the following patches, poll group will have rsps objects and to share
the code between poll group and qpair, option for creation will be used.
As a preparation, merge nvme_rdma_alloc_rsps() and
nvme_rdma_register_rsps() into nvme_rdma_create_rsps(). For consistency,
merge nvme_rdma_alloc_reqs() and nvme_rdma_register_reqs() into
nvme_rdma_create_reqs().
Update unit tests accordingly.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I92ec9e642043da601b38b890089eaa96c3ad870a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14170
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
When SRQ is supported, recv objects will be allocated by poll group
and qpair will associated and use them. In this case, we do not want
qpair to allocate and free recv objects. When connection is established,
it will be decided if SRQ is used or not. Hence, defer recv objects
allocation until connection is established.
Send objects are not affected directly by SRQ, but
nvme_rdma_register_reqs() no longer does any registration and deferring
send objects allocation makes the code more consistent. Hence, defer
send objects allocation until connection is established too.
Even after this patch, we rely on nvme_rdma_ctrlr_delete_io_qpair()
to free resources completely.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Ic151fad01009d92a7fc809a730e6e9dff1a365f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14169
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
When use of deprecated featues is encountered, SPDK now calls
SPDK_LOG_DEPRECATED(). This logs the use of deprecated functionality in
a consistent way, making it easy to add further instrumentation to catch
code paths that trigger deprecated behavior.
Change-Id: Idfd33ade171307e5e8235a7aa0d969dc5d93e33d
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15689
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
autofuzz_vhost.sh doesn't get run in per-patch tests, so this
was missed when the CPU lock file code was under review.
Fixes: 0af934b ("event: add CPU lock files")
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I733cec50ed27630843ca330db283ceabb9e308a1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
