Previously the nvme_ctrlr_state_string() function
was only defined for DEBUG builds since it was only
used in DEBUGLOGs. So now that we're also using
it for an ERRLOG we need to define this function
in release builds as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic14b251fbd7da1519ad0fd4d8a183d6b6ca17984
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9468
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This type of errors is not fatal and can be observed when
qpairs are diconnected. The same approach is used in target
side.
Change-Id: Ic3c7b1731c0cbd2e98d776f0f0c5d82464b3d556
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9416
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is needed for reporting additional information in JSON RPCs
Change-Id: I45da2ea78cd5415f7536130b6793ca29e929b86e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9338
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When poll_group is used, several qpairs share the same CQ
and it is possible to receive a completion with error (e.g.
IBV_WC_WR_FLUSH_ERR) for already disconnected qpair
That happens due to qpair is destroyed while there are
submitted but not completed send/receive Work Requests
To avoid such situation, we should not detroy ibv
qpair until we reap completions for all submitted
send/receive work requests. That requires some
rework in rdma transport and will be implemented
later
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Idb6213d45c2a7954b9ab280f5eb5e021be00505f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Poll group holds lists of qpairs in different states and
when we got rdma completion with error, we iterate these
lists to find a qpair which qp_num matches. qp_num
is stored inside of ibv_qp which belongs to spdk_rdma_qp
structure. When nvme_rdma_qpair is disconnected, pointer
to spdk_rdma_qp is cleaned but qpair may still exist in
poll group list and when we start searhing for qpair by
qp_num we may dereference NULL pointer.
This patch adds a check that pointer to spdk_rdma_qp
is valid before dereferencing it. To minimize boilerplate code,
wrap all check in macro. Add unit test to verify this fix.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I1925f93efb633fd5c176323d3bbd3641a1a632a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9050
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
John Kariuki tested this patch on a system with
several Intel P5800X Optane SSDs, to determine the
performance impact of adding these two
spdk_trace_records() in the main NVMe I/O path.
The pathological case (512B random reads on a single
Xeon core) decreased from 13.10M to 12.88M, or 1.7%.
Normal workloads (4KB+) would incur a smaller penalty
since the I/O rate would be much lower - maybe even
unnoticeable..
This is a really valuable tracepoint to have enabled
by default, so I think this small amount of degradation
is acceptable.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie2543cadf3541eb74398d31ac0f495522ab49ec0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9303
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This new API signals that the ctrlr will soon be
reset. This allows the transport to skip unnecessary
steps in following calls to the driver prior to the
reset - for example, skipping PCIe DELETE_SQ/CQ
commands when freeing an IO qpair.
Note that if we are deleting a qpair after
prepare_for_reset was called, and the qpair is
still waiting for a CREATE_IO_CQ or CREATE_IO_SQ,
we cannot poll for those commands to complete,
but we also cannot free the qpair immediately.
So set a flag for this case to defer the
destruction until the outstanding CREATE_IO_CQ or
CREATE_IO_SQ callback is invoked (typically as an
aborted command when the reset happens).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I34c6276ae71e7d61ad4a3720f1a985b1ee96bd8b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9249
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Expose the already existing nvme_ctrlr_get_cc as
spdk_nvme_ctrlr_get_regs_cc, similar to spdk_nvme_ctrlr_get_regs_csts and
spdk_nvme_strlr_get_regs_cap etc.
Signed-off-by: Tomasz Bielecki <tomasz.bielecki@wdc.com>
Change-Id: Ibfcf6fbe64dee3719f381184fb728ab6e4d52526
Signed-off-by: Tomasz Bielecki <tomasz.bielecki@wdc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9220
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If NN is very, very large, this allocates too much memory. For now, just
use a list.
Change-Id: I904977673d8fb6c86f03c94ba798c6cc07f4a4d8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9301
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This can be done immediately after receiving the controller identify
data for now.
Change-Id: I527a44c4d1f4d3ad2eeb8fc77e07086c2358cac3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9300
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When deleting an IO qpair, make sure that it's connection process is
finished (i.e. create CQ/SQ commands are completed) before freeing it.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I487dcef390d73ff4a7264ff97d965c9030916840
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9279
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows for creating admin qpair in an asynchronous mode and I/O
qpairs based on what the user specified in spdk_nvme_io_qpair_opts.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1801ea76d5a08b1bdc558eb0f18648f59454b654
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9077
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Split the connection process across two states, which allows the
transport to connect the admin queue asynchronously.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie84477331df0abf5ffdfc2a0ff5d5ada760c9e73
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9076
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows for submitting IO requests before the CONNECT command is
sent and not stopping the connect process due to the CONNECT being
queued. It could happen once IO qpair connection is asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I04e45b1c2f49f9da3412c843ea899341c56a0420
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8624
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will allow us to call `connect_qpair_poll()` from
`process_completions()`. Otherwise, `nvme_fabric_qpair_connect_poll()`
which calls `process_completions()` might create a loop, which can cause
issues with `nvme_completion_poll_status` used for tracking the CONNECT
command by the fabrics code.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ibd67bc3e011b238db264394e005b3268624cceef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8623
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
The fabric connect command is now sent without. It will make it
possible to make `nvme_tcp_ctrlr_connect_qpair()` non-blocking too by
moving the polling to process_completions (this will be done in
subsequent patches). Additionally, two extra states,
`NVME_TCP_QPAIR_STATE_FABRIC_CONNECT_SEND` and
`NVME_TCP_QPAIR_STATE_FABRIC_CONNECT_POLL`, were added to keep track of
the state of the connect command. These states are only used by the
initiator code, as the target doesn't need them.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I25c16501e28bb3fbfde416b7c9214f42eb126358
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8605
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
These functions will allow for sending the connect fabric command
asynchronously.
Additionally, this patch changes the return code for
`nvme_fabric_qpair_connect()` when a timeout occurs from -EIO to
-ECANCELED. It gives better description of the error as well as make it
more consistent with `nvme_wait_for_completion*` APIs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I95806626d3573ebe4b1568157fd57013c4b909a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8604
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Since the connect will be completed asynchronously, we
need to keep the pointer around so we can access (and
free it!) later when the command completes.
Also change the code to poll on the status using the
new nvme_wait_for_completion_poll(), as prep for upcoming
patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I28add8f967fd000afed1e50e491a16ea9da16c22
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8603
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This gives us a context that we can poll on when using the
nvme_wait_for_completion framework for async operations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5b23f9096eed5ce95848d1995c1ed0b4c74edc92
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8602
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Modified the async_list to be per-process instead of
on the controller object. This allows an NVMe multi-
process setup to have Asynchronous Events Reported
to each process that may interested in them. In the
previous case, where the async event list was on the
controller object, AER (Async Event Requests) would
not be reported to all the processes.
Fixes: #1874
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I3e885c0cf5a0fd471d243bc7d96a8b7ffe65d14b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8744
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Cleaning up the API, implementations were removed in 7dbe0e7c.
Signed-off-by: Tomasz Bielecki <tomasz.bielecki@wdc.com>
Change-Id: Iae25bbb301da123f9e784678d4c4f0b8d39f262e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9221
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There may be multiple C2H data pdus recevied.
So we should use the following steps:
1 Use the SPDK_NVME_TCP_C2H_DATA_FLAGS_LAST_PDU
to check whether it is a last pdu or not.
Then we will not cleanup tcp_req, i.e., tcp_req->datao
will not be cleaned.
Then use the SPDK_NVME_TCP_C2H_DATA_FLAGS_SUCCESS
to check whether the controller will use resp pdu
or not.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9dccf2579aadd18f31361444e25bd4b3b76f06c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9192
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was accidentally merged as part of c3a5848.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I430e7035e9c2baf0b8d0592cda76265957c3791e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9251
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is exension to the existing nvme_wait_for_completion* interface
that allows the user to poll for request's completion without blocking.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6c5b7203883f8e2fa28ceb039ce63aa50631f571
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8601
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is needed to enable using the nvme_completion_poll
machinery in an asynchronous mode.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I8009ab81bcc02cba685f560be3d6540aab7ef3f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8600
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be done in stages. This patch adds the
nvme_tcp_ctrlr_connect_qpair_poll function and and makes the icreq step
asynchronous. Later patches will expand it and make the
nvme_fabric_qpair_connect part asynchronous as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ief06f783049723131cc2469b15ad8300d51b6f32
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8599
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The pcie layer can't always detect bad addresses
in the request at submission time - for example,
the transport may not have any trackers available
and the request gets queued at the generic
nvme level.
So this means that we might detect vtophys failures
during submission time, or in a process_completions
context - the latter happening when we complete
one request which triggers submitting a new request.
Currently if the vtophys failure happens during
submission context, we return -EFAULT to the
caller *and* call the completion callback. Nowhere
else in the driver do we do both - the intention
has always been that you get one or the other.
So make all of this consistent by tagging the
tracker and the qpair with a flag if we hit a vtophys
error in the submission path. Return 0 to the caller,
who will then later get a completion callback for the
bad request when the qpair is next processed for
completions.
I considered a separate TAILQ to hold these 'bad'
trackers, but that would have required duplicating
quite a bit of the tracker completion code for this
one case. The flag on the pqpair is already in the
hot cacheline, so it's cheap to check it. We will
only interate the outstanding_tr list when that flag
is set, so this should have zero impact to performance.
Fixes issue #2085.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I60b135fb32d899188e51545b69feb1b27758fd7f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9234
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
These functions accept extendable structure with IO request options.
The options structure contains a memory domain that can be used to
translate or fetch data, metadata pointer and end-to-end data
protection parameters
Change-Id: I65bfba279904e77539348520c3dfac7aadbe80d9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Add a global list of memory domains with reference counter.
Memory domains are used by NVME RDMA qpairs.
Also refactor ibv_resize_cq in nvme_rdma_ut.c to stub
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie58b7e99fcb2c57c967f5dee0417e74845d9e2d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8127
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
This avoids an infite loop when user sends and then immediately aborts
all requests while the transport cannot submit them (returning -EAGAIN).
It might happen in two cases: 1) if the transport doesn't have any free
requests or 2) if the qpair is still in the NVME_QPAIR_CONNECTING state.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia1d0b7c93f387524be0ad39597ec49851e1d3af7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8711
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Needed to make this code path asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6b18d4e9fc1a29b30c78f7f087b80913d00f9726
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8598
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
If a qpair is part of a poll group and it's not configured in the async
mode, it should be using poll group's process_completions variant.
Additionally, connecting qpairs to the poll group was moved up, so that
qpairs are already on the connected qpairs queue when waiting for the
connection to complete.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I08f75bd61a566d1ab60029b6202d9337df75733f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9074
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Replaced poll cycle count with a timeout when destroying a qpair that is
part of a poll group. Tracking the time instead of a poll count is more
stable, as the number of poll cycles can vary based on the application's
behavior when destroying a qpair.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7445bc1b411f2905aab7bf3dc7b2d3344712e1eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9200
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Number of active namespaces may change. So, on ANA log page update we
should check if buffer has to be resized.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I1720317ea7f59e5afef73d5c4bd1cd69a7dd6520
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Log page reading function 'spdk_nvme_ctrlr_cmd_get_log_page' does read
into intermediate buffer and then copy to user provided buffer. So,
there is no need for user buffer to allow DMA.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I7337afa99c3ae666cc43ea2a48317de875334cfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9177
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
In the next patch, the qpair is polled from a poll group and needs a
disconnect callback, which should also fail the qpair, so it makes sense
to have a separate function doing that.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ied76431520962b25220027be829a4609afb6bbda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
async_mode option is currently supported in PCIe transport layer
to create io qpair asynchronously. User polls the io_qpair for
completions, after create cq and sq completes in order, pqpair
is set to READY state. I/O submitted before the qpair is ready
is queued internally. Currently other transports only support
synchronous io qpair creation.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib2f9043872bd5602274e2508cf1fe9ff4211cabb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8911
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The generic transport layer still does a busy wait, but at least
the logic in the PCIe transport now creates the queue pair
asynchronously.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Change-Id: I9669ccb81a90ee0a36d3f5512bc49c503923b293
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8910
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
.ctrlr_connect_qpair
Previously this was assumed to be a synchronous process so the generic
layer transport code updated the state after .ctrlr_connect_qpair
returned. In preparation for making this support asynchronous mode,
shift that responsibility down into the individual transports.
While none of the transports actually do this asynchronously, insert a
busy wait in nvme_transport_ctrlr_connect_qpair to wait for the qpair to
exit from the CONNECTING state. None of the upper layer code can
actually correct handle a transport doing this asynchronously, so the
busy wait will cover that.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3c1a5c115264ffcb87e549765d891d796e0c81fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8909
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Split the NVMe controller reset into pre-init and reinit stages so
that the latter begins with a call to nvme_ctrlr_process_init(),
returning -EAGAIN if the controller is not yet ready so that a poller
can call it again later.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: Ia182b04e438241b139109be93f3ed858fac7f3d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Implement an async variant of spdk_nvme_ctrlr_reset(). This initial
implementation only allocates a context and returns it to the caller,
relying on the caller to poll the context to execute the existing
spdk_nvme_ctrlr_reset() implementation.
Wire up spdk_nvme_ctrlr_reset() to use this async variant to verify
that NVMe controller reset still works.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I75d4b75dbf5897db452ee65286aef5a4eb839fca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
