Generate the full discovery log page in a memory buffer, then copy just
the requested part of it for each Get Log Page call.
Change-Id: I12730c59c0395cdac57aaab96337e938952e3011
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The other simplifications to probe_info and trid made the
trtype argument redundant.
Change-Id: Ie7bea4e2204e690dc4909eeacd065e0722b53272
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The probe_info was reduced to just containing a
transport_id, so remove probe_info entirely.
Change-Id: Ica9a22d126cd14e282decd3eea1a0afe0460f099
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Use the standard quirk mechanism to specify which devices
need software assisted striping.
Change-Id: Id8156876a90b4caf9d687637e14c7ad4a66ceda6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
It is causing confusion and is not compiled or run.
Change-Id: I182bbec9ac2520e171214e4e50be60edd6fd8984
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Scanning the transport may result in both new
devices and removed devices, so pass the callback
for both operations.
Change-Id: I6f73dbe6fd7cf61575c354b43f8ae3e2a01e2965
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Simplify the arguments to nvme_transport_ctrlr_scan to take
a transport id that identifies the discovery service (or
NULL to scan PCIe).
Further, separate scan into two functions - scan and attach.
Scan is for scanning an entire bus, attach is for a specific
device.
Change-Id: I464f351a02a04bc5a45096dcf5dc8fc5ac489041
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a small step toward making discovery more like
scanning a local PCI bus.
Change-Id: Ie7149ad060f2eeb56939b1241187bdf09681f2aa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
If we use regular 'echo' without -n when setting up the kernel target
sysfs entries, the traddr and trsvcid will contain the newlines, so use
echo -n to prevent the newlines from being added.
Change-Id: I924ffc0d1957eed25e97a12fe12d43d390176c05
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It's not the whole transport - it's just an enum for the
type of transport.
Change-Id: Ia435a21792f221ddf50ddf4f0923c6152622eccb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
When we enabled the ERL1 configuation, for the DATAIN task release
process, we will queue the task to the SNACK list firstly, and then
remove the list when got ACK from initiator, but for this part of
logic, the reference count of primary task was not released correctly.
Change-Id: Ic5959cf644c74f676be0b84c5650292dc426b2d8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
There is an intermittent bug in the multi-process support causing test
failures, so disable the tests for now until the multi-process code is
fixed.
Change-Id: I778004c8276390accb06eab5b86265169886c45f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change the PCI enumeration API to individual functions per device type
so that only the drivers that are actually in use get linked into the
final executable. All of the common code is still shared internally in
the env_dpdk library.
Change-Id: I2ba83afe59202a510f999a0674e23e60b6581221
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This version of multi-process support needs to have DPDK 16.11 builtin.
Change-Id: I3352944516f327800b4bd640347afc6127d82ed4
Signed-off-by: GangCao <gang.cao@intel.com>
Each transport should handle its own qpair cleanup internally.
Change-Id: I7dd737be820ea6bad686f4aad7d74044fad58a47
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Let the transport access the controller options during
ctrlr_construct().
Change-Id: I83590c111e75c843685dd9315f0f08416168356d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The information in this file is not useful after the test has finished,
so rather than copying it to the build output directory, just delete it
like all of the other tests using FIO.
Change-Id: I8495a2956b03f376b391ed501aaa61a857bfa490
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This script is testing the SPDK NVMe-oF host and target code, so the
kernel nvme-rdma driver should not need to be loaded.
It is also not running FIO, so it doesn't need to clean up the FIO
job state files.
Change-Id: I3cfe619abf36885df4bdc6eecebf0e197fb869be
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows this test script to be used with different
iSCSI target binaries, as well as optionally turning off
configuration of an NVMe-based target node.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id6841e71d7842117756346cfd0fe1853a1ea5c6a
This allows us to print better error messages when connecting to a
subsystem that exists but does not allow a specific host.
Additionally, we can now return the correct error code for a host that
is not allowed.
Change-Id: I16cd4ac2745cf50bb54601b464b0d23954f86fda
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
As part of this commit, stop building the iscsi
tests on FreeBSD. This new pdu test links in
object files from the iscsi library, some of which
do not build currently on FreeBSD with our default
error/warning levels.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icb6a3dc17aa62882d0477f7734d2701ea09a3f36
Use the NVMe over Fabrics spec definitions for TRTYPE rather than the
internal library transport type.
Change-Id: Idead559a8f8d95274fc580d10e82033822e6eda8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This enables some future Makefile simplifications.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I28e001e0e261d6c9f556cf53585e223f64cf0ae0
Make it easier to use SPDK libraries by putting them all in a single
directory that can be added with -L rather than scattered around the
source tree.
Change-Id: I5c0f5dd6e7058b5f92fa9bc41548190ffc064761
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Leave the RBD pool configured and running throughout the tests so that
it can be used in multiple test scripts.
Change-Id: I056ef29bd8d97fa63f1ca78ee728f9c51f4bdf41
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SPDK_TRACELOG macro depends on a CONFIG setting (DEBUG), so it
should not be part of the public API.
Create a new include/spdk_internal directory for headers that should
only be used within SPDK, not exported for public use.
Change-Id: I39b90ce57da3270e735ba32210c4b3a3468c460b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than building a configuration file data structure up by hand,
just write the configuration to a temporary file and read it via the
spdk_conf_read() API.
Change-Id: I07b9fefc307fd2e07185c8655f22d6f188425327
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Considering the process can be terminated in the cases like ctrl+c,
kill command or memory fault, the ref is tracked in the per process
structure spdk_nvme_controller_process and whenever there is other
process attaches or detaches the controller, a scan will be issued
to cleanup those unexpectedly exited processes.
Change-Id: Ib4f974f567a865748d42da4ead49edd383dfc752
Signed-off-by: GangCao <gang.cao@intel.com>
The details of the structure were removed earlier, but
now remove all references even to a pointer to the
structure. The user can refer to transports by their
string name.
Change-Id: I273356f46329ea5372dcd951eda6f14767477d69
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The outstanding I/O at the time of reset are expected to fail, so don't
exit with an error code.
This could use some better validation to make sure failures only happen
during the reset, but this at least gets the nightly tests running
again.
Change-Id: Ibf5e6962fabd1a556a64591c65012ffacc1fd1d1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Remove 4k allocation size in spdk_scsi_task_alloc_data(). From now on
all commands must obay allocation length.
Change-Id: Ica9384c62d431483ae1d0bd2e6fdee18b570861f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This refactor MODE SENSE 6 and 10 related functions to respect buffer
size parameter.
Change-Id: I03bad456bac0554a8bf7b56f69d1f9cf5b1991f6
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This patch is preparation for fixing alloc_len overrun in SENSE 6/10 and
READCAP 6/10. To simplify code forbid usage of iov outside of
scsi/task.c.
This also drop SPDK_SCSI_TASK_ALLOC_BUFFER flag that obfuscate code. As
a replacement assume that if field alloc_len is non zero it mean that
iov.buffer is internally allocated. Functions
spdk_scsi_task_free_data(), spdk_scsi_task_set_data() and
spdk_scsi_task_alloc_data() manage this field.
Change-Id: Ife357a5bc36121f93a4c5d259b9a5a01559e7708
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
The bdev function table should not be part of the public API.
Change-Id: I5d6f40d1b37c4471041c1c9d6253a3f92e9e9701
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Instead of the next_sge callback returning the physical address
directly, make it return the virtual address and convert to physical
address inside the NVMe library.
This is necessary for NVMe over Fabrics host support, since the RDMA
userspace API requires virtual addresses rather than physical addresses.
It is also more consistent with the normal non-SGL NVMe functions that
already take virtual addresses.
Change-Id: I79a7af64ead987535f6bf3057b2b22aef3171c5b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Custom bdev modules can return any SCSI status and SCSI sense
information to a host by this patch. This is usefull when a custome bdev
module detect an error in the module and need to return meaningful
information to a host.
Function pointers will not work for the DPDK multi-process model (they
can have different addresses in different processes), so define a
transport enum and dispatch functions that switch on the transport type
instead.
Change-Id: Ic16866786eba5e523ce533e56e7a5c92672eb2a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Since we are usually going to be removing multiple events from the queue
at once, use the DPDK burst dequeue interface to improve efficiency.
Also rework the event queue runner to always process a fixed maximum
number of events per timeslice for simplicity. This removes the
rte_ring_count() call from the hot path and improves fairness between
events and pollers.
Now that events are dequeued in bulk, we can also put the event objects
back into the mempool in bulk. Add an env wrapper around
rte_mempool_put_bulk() and use it to free all of the events at once.
Basic performance benchmark using test/lib/event/event/event -t 10
is improved: previously ~40 million events per second, now ~46 million
events per second.
Change-Id: I432e8a48774a087eec2be3a64c38c339608af42a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Instead of searching /sys for devices and checking which
driver happens to be loaded, use lspci. The lspci tool is
a bit smarter - it knows which driver is loaded now but
also which driver is the default driver the kernel wants
to load for that type of device. It's that default that
we need.
Change-Id: I1dc01ab6eac233e85f42316567bde2f4ed2203c6
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
This removes the 2 bytes of SenseLength from the beginning of the SCSI
sense_data buffer, so now the offsets within sense.data match up to the
expected values from the SCSI spec.
Change-Id: I9188560096a9ec5a8fcf83bec95201521b127494
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_nvme_probe() will now provide a struct spdk_nvme_probe_info to the
probe and attach callbacks in place of the PCI device pointer.
This struct contains the useful information that could be retrieved from
the PCI device during probe.
The goal of this change is to allow expansion of the probe information
in the future when other transports (specifically, NVMe over Fabrics)
are added that do not necessarily use PCI addressing or device IDs.
Change-Id: I59a2a9e874e248ce5fa1d7f4b57c8056962ff3cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the new public PCI ID structure in the NVMe library to replace the
previously private struct pci_id.
Change-Id: I267d343917f60bdae949a824bc0fe67457cbbc0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
- Split the part that gets a PCI device's address into its own function,
spdk_pci_device_get_addr(). This is useful outside of the comparison
function and is orthogonal to comparing addresses.
- Make the comparison function take two addresses instead of a device
and an address. The more general form will be useful with addresses
that are not directly associated with a device. Because of this, also
rename the function from spdk_pci_device_compare_addr() to
spdk_pci_addr_compare().
- Return a signed value similar to strcmp() so that addresses can be
ordered, not just compared for equality.
Change-Id: Idf304454af09ea57f1e1d5dc3a39b077378cecad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace hard-coded list of Malloc0 Malloc1 with dynamically-generated
list based on the names that were returned from the bdev creation RPC
calls.
Change-Id: I2171b650fa540184de0e6dfd6bb5f66611e9c0d8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When creating a bdev via the RPC interface, there was no way to know
what name it was assigned (other than predicting it based on the
numbering scheme). Change all of the relevant RPC interfaces to return
an array of bdev names so they can be used to construct LUNs/subsystems
dynamically in scripts.
Change-Id: I8e03349bdc81afd3d69247396a20df5fcf050f40
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a field to struct spdk_nvme_ctrlr_opts that allows the user to
specify a keep alive timeout, and add automatic submission of Keep Alive
commands to spdk_nvme_ctrlr_process_admin_completions().
Change-Id: Ib282299a571d8edc59c7933418751bc3a6c98b40
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
jsoncat parses the input file using the SPDK JSON parsing library, then
prints it back out using the SPDK JSON writing library.
Change-Id: I6f35533cdb4977306ff50be9a706a783a62cdfc1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Report all of the tests that failed (and remove some overly fancy
Python magic that didn't work anyway).
Change-Id: I4ee47e845fe4727c69f84b505ea5ae19a15a9270
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds support for spdk_bdev_readv in scsi layer.
It also fixes write so that it uses multiple iov's instead of one.
Currently we should use only task->iov (for single vector operation)
or task->iovs (for multiple vector operations).
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ia3b2f6d18fd212b11d7b63b11dc46ec5bbc74788
Make the quirks mechanism generic in preparation for quirks for devices
from other vendors.
Change-Id: Ic003b020a38f1b966021db30e3f2bce9cf6a1a0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch removes reduntant field in spdk_scsi_task and
fixes all logic to use iov.iov_base
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ie2fa1e2357b6383c118d05aec9206d1c60537d40
Instead of using shell commands, use python to parse the output
of lspci. This is considered more "Pythonic".
Change-Id: I88ef0fe8cbfbcaa9c5d323552a82ef63e46f52cf
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Add a transport function to get the max data transfer size to break the
dependency on NVME_MAX_XFER_SIZE.
Change-Id: I846d12878bdd8b80903ca1b1b49b3bb8e2be98bb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the PCIe-specific admin queue setup to nvme_pcie_ctrlr_enable.
Change-Id: Ic3f5625fa804f719040ba86b7fc3bf82fcc057c0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
A status member of spdk_bdev_io structure is set after the if block.
Therefore a status parameter should be checked instead of a status
member.
Change-Id: I4030a7fcdb36d9c589802ec5b4e424591dc2a3b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The value of CAP should not change during the lifetime of a controller,
so read it once during ctrlr_construct and store it in the ctrlr.
Change-Id: I089d4141b4e0c9aae6c53abf9bb0ef6577dabe0b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than embedding adminq directly in the spdk_nvme_ctrlr structure,
change it to a pointer to a spdk_nvme_qpair. This is necessary to allow
the transport to extend the qpair structure.
Change-Id: I041685d5037088cf56d046fe99bf204edcfc57b1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This requires a couple of related changes:
- I/O queue IDs are now allocated by using a bit array of free queue IDs
instead of keeping an array of pre-initialized qpair structures.
- The "create I/O qpair" function has been split into two: one to create
the queue pair at startup, and one to reinitialize an existing qpair
structure after a reset.
Change-Id: I4ff3bf79b40130044428516f233b07c839d1b548
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also continue checking for errors after a problem has been found.
Change-Id: Iea37311e54f68fb6ba8c804ad4b2fb92d5238f36
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the transport ctrlr_construct callback responsible for allocating
its own controller.
Change-Id: I5102ee233df23e27349410ed063cde8bfdce4c67
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These are specific to local NVMe PCIe devices, so move them out of the
generic NVMe code into the PCIe transport.
Change-Id: Iea2056a4c438b7d3a303b4b5e977ce7aa9e58c05
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This changes as little code as possible while still creating
a single public API header. This enables future clean up
of the public API and clarification of the exposed
concepts.
Change-Id: I780e7a5a9afd27acf0276516bd71b896ad301c50
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This will allow factoring out PCIe-specific code into a swappable
transport so that NVMe over Fabrics host support can be added.
Change-Id: I4df74dd268d655e3b36e8d6114ebe7d79a24844d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Mounting with sync to do more IO during test.
Print dev stats after umounting.
Do not change directory to mounted system, as this is preventing cleanup
trap to umount used path in case of failure.
Change-Id: I2f444b67b1f293c9d7c939f8f94aa5756e20aa26
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Change tests to use read/write vector and non-vector versions.
Change-Id: I5a97568d3dc2f61d44721f4b0c75331baad417bb
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This patch enables vector operation for bdev drivers aio, malloc and
nvme.
The rbd driver still handle only one vector.
Change-Id: Ie2c1f6853bfd54ebd8039df9a0305854ca3297b9
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This patch makes lun_name:lun_id pair as one object,
the same for the pg_tag:ig_tag.
Change-Id: Ib08450d12bde9b8388d4ae41e214cc0ba64c8b1e
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Instead of a magical "All" value for allowing all hosts, allow the
caller of construct_nvmf_subsystem to omit the "hosts" parameter.
Change-Id: I97c7ae806a0be7142fb59708d47023e42e127fcc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For the nvme readv/writev APIs, the PRP checking logic was
incorrectly failing single SGE payloads that were larger
than 4KB. This patch adds a test case for this scenario,
and fixes the PRP checking logic.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6357d620599666046d2cb74d7923dac1f75418c5
This test will create a malloc and NVMe iSCSI target node,
perform an iSCSI login, create and mount a filesystem, then
copy the SPDK contents to the mount and do a build.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I00291e6ca768dd4b685086cf1479098558b9329f
Explicitly include the pthread header after removing some headers that
implicitly included it.
Change-Id: I39fe272acfcc63d3888d2430137de2c3426f1af6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use standard GCC style atomic operations instead of
the DPDK calls. The DPDK calls end up translating
to the gcc standard inline calls in the generic
case anyway.
Change-Id: I0ea760c4e23c3660b082a803bbc174de7250f365
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Remove #includes for all DPDK headers that weren't
necessary.
Change-Id: Ib02522e0f04e64a1c98afceb7508cc0e8d931a9d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This was only used for debugging. Everywhere else
used the spdk_memzone abstraction.
Change-Id: I8a828ea3c7abccb66c8a027cb13de43c560ff7a1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This converts some, but not all, usage of rte_mempool
to spdk_mempool. The remaining rte_mempools use features
we elected not to expose through spdk_mempool such as
constructors, so that will need to be revisited.
Change-Id: I6528809a864ab466b8d19431789bf0f976b648b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change the type from int to bool and change the name
from data_ref to data_from_mempool.
Change-Id: If1fc11761e63561443ed44d6a0860e416e424df8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This is required since pollers are now directly removed
(rather than scheduling an event) when the unregister call
is made on the poller's lcore.
Without this change, if a poller is registered then
immediately unregistered, the unregistration will seg
fault since the event adding the poller has not executed
yet.
Also add a test case that exhibits the sequence of events
described in this commit message.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5c6ba0ee224ac1f8f3ebb8e7571714e718bd42db
Use the env library to perform all memory allocations
that previously called DPDK directly.
Change-Id: I6d33e85bde99796e0c85277d6d4880521c34f10d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Also stop submitting new I/O for any target that reports
an I/O failure by setting its is_draining flag when the I/O
failure is detected.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I89c9d19b22a164caf5aef20d63b509d33b7aeef7
Enforce exactly one trailing \n, and fix all of the existing cases.
Change-Id: I6218e4700e90aeb647eaee78089530c79993c8c8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch enables vector operation for bdev drivers aio, malloc and
nvme.
The rbd driver still handle only one vector.
Change-Id: I5f401527c2717011ecc21116363bbb722e804112
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This allows users to swap their PCI library from
libpciaccess/dpdk to another mechanism using the standard
method for swapping out the env library.
Change-Id: Ib2248f8b43754a540de2ec01897e571f0302b667
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This allows users to swap out SPDK's third party
libraries for an implementation based on their own
framework.
Change-Id: Ia0b7384ce5e31acba5ad0d7002dec9e95b759c52
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The new env library will wrap all third-party library
calls and be easily swappable with alternate implementations
at build time. For now, it's just the memory library
renamed.
Change-Id: I26a70933289f8137107208ba75f7520fd7a33da0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This patch also drops support for automatically unbinding
devices from the kernel - run scripts/setup.sh first.
Our generic pci interface is now hidden behind include/spdk/pci.h
and implemented in lib/util/pci.c. We no longer wrap the calls
in nvme_impl.h or ioat_impl.h. The implementation now only uses
DPDK and the libpciaccess dependency has been removed. If using
a version of DPDK earlier than 16.07, enumerating devices
by class code isn't available and only Intel SSDs will be
discovered. DPDK 16.07 adds enumeration by class code and all
NVMe devices will be correctly discovered.
Change-Id: I0e8bac36b5ca57df604a2b310c47342c67dc9f3c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Provide a convenience wrapper for general purpose dataset
management commands. The previous wrapper for deallocate
was difficult to use correctly and only for deallocate.
Note that the name is "dataset_management" as opposed to
"data_set_management" to match the NVMe specification.
It's questionable whether "dataset" is valid English, but
it is best to match the specification.
Change-Id: Ifc03d66dbabeabe8146968cf8a09f7ac3446ad68
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Where possible (for tests that don't require DPDK), run the unit tests
under Valgrind to check for memory leaks and out-of-bounds accesses.
Change-Id: Ic7b3cdd39a6d59f4e41b4a161be3363f6b076f65
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Avoid putting the large JSON-RPC server structs on the stack in the unit
test code, since it confuses Valgrind.
Change-Id: I598530810aa23e802d07cd1bb94de16920f33dac
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than requiring changes to a static list of header files, use the
GNU Make wildcard function to generate a .cpp file per header.
This also tests whether each header includes all of the system headers
for the types it uses.
Change-Id: I05b82510b194533672568019e138d7d1aad2e86b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Modify the spdk_poller_unregister() function so that it works correctly
when unregistering a poller from its own callback function.
Change-Id: I57fa5ebd8a8bad522e34f597b406a4726f1b76ad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This was added after the previous SPDK_CU_ASSERT_FATAL change was
merged.
Change-Id: I9d26fcd78157b6c9b232ac1e7484d0939cc90612
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
We already require the assert header from the C standard library,
so use that instead of RTE_VERIFY to further isolate DPDK
dependencies.
Change-Id: I4a718af858c88aff6080e33e6c3dd533c077b8f4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Add some checks to hit paths not covered by the current tests.
Change-Id: If8e7977ab8327eacfa33657d0a167f3b935b0113
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some subsystems may wish to create unique I/O channels
which are not shared across all users of the same I/O
device on the same thread.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3ade3675d57338cf85b6a301285e6f392bd6cd2e
Also remove libspdk_util.a from the io_channel_ut linker command, since
it already includes the tested C file directly and doesn't depend on any
other util library functions.
Change-Id: I4b3fc4d57b5af4524b53664365f6ba52686e4b80
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The test can't continue if a NULL pointer would be dereferenced.
Change-Id: If857057c69679de3be08c4605d15bc2b3892210a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If posix_memalign() fails, it may not have updated buf, so set it to
NULL explicitly.
Change-Id: I756bdc59ec1e31987ad3e6754eec4e2194b95074
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
bdev and copy modules no longer have check_io functions
now - all polling is done via pollers registered when
I/O channels are created.
Other default resources are also removed - for example,
a qpair is no longer allocated and assigned per bdev
exposed by the nvme driver - the qpairs are only allocated
via I/O channels. Similar principle also applies to the
aio driver.
ioat channels are no longer allocated and assigned to
lcores - they are dynamically allocated and assigned
to I/O channels when needed. If no ioat channel is
available for an I/O channel, the copy engine framework
will revert to using memcpy/memset instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99435a75fe792a2b91ab08f25962dfd407d6402f
With the I/O channel changes, this test needs to be rewritten
to be event-based. bdevio uses the spdk_bdev_do_work() function
to poll for completions, which is built on the check_io functions
that are going away when we move to using I/O channels.
Do not delete the code from the tree - just detach it from the
build and the test scripts for now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I88674988db6ccb3673faf7eb5b3e79b403059fa4
This patch adds a basic framework for creating I/O channels
for I/O devices. An spdk_io_channel represents a one-to-one
mapping between a calling thread (represented by spdk_thread)
and an I/O device that the thread will perform I/O operations
on.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I658ab7f995cc962f4e2a204e058cdd3ad3fd735d
Purpose: To make the function definition style consistent
Change-Id: I7ade943881aa5076fdd419958e386ae3c3661da6
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This matches the general order (LBA start then LBA count) for
the NVMe API.
While here, fix a copy/paste error in a debug message (write
instead of writev).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ice326af5d6025867dffed4d1f6c7b81fb9eba5eb
Rather than forcing the NVMe library user to pass a specially-allocated
block of memory (e.g. rte_malloc() in the case of the default
nvme_impl.h), just make the NVMe library allocate a suitable buffer
itself and copy to/from the user buffer as needed.
The fast path I/O functions still require special rte_malloc()
allocations, since we don't want to add an allocation and copy to the
I/O critical path.
Change-Id: I7fe88c0ba60c859a33bbe95b7713f423c6bf1ea8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Rename this function and make it more meaninful, since
we have spdk_nvmf_session_connect which is used to link a
connection to the session
2 split spdk_nvmf_session_destruct.
Change-Id: I150df7ccdf4de3428d8cecbb286d5f7944510a8c
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The application is now entirely responsible for scheduling subsystem
pollers and sending events between threads.
Change-Id: I88da1f53b5e8852c7c4acd6f0a7a1e2219fbed41
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reason: In acceptor_poller_unregistered_event, we
directly call spdk_nvmf_check_pools and spdk_app_stop,
it will fail the memory check.
And function nvmf_delete_subsystem_poller_unreg will
not be called since we already call spdk_app_stop.
Change-Id: I3ffa30c87b149a66cee1d87d1bb81d4dc8cc96b9
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The trace logs were useful during development, but now that the target
is working reliably, we can make the test output quieter and shorter by
turning them off.
Change-Id: I46cd2e22a3ccd69a5f94a1843b722f517223a343
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The translation code currently cheats a bit - it allocates a full 4KB
buffer for any DATA_IN command that is not a READ, and then the
different SCSI commands that fall into this category (INQUIRY,
READ_CAPACITY, MODE_SENSE, etc.) can write as much data as they
want without having to worry about a buffer overrun. Code higher
up the stack makes sure we only send the correct amount of data back
to the iSCSI initiator.
This patch fixes this behavior for standard INQUIRY (EVPD = 0).
Future patches will fix the behavior for other non-READ DATA_IN
commands, at which point we can remove the 4KB allocation and
only allocate the amount of data specified in the CDB.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If5e4a10eeba9851e2d91cab71228d2fc2d5baad0
Switch from the non-portable <sys/endian.h> functions (htobeXX/beXXtoh)
to the SPDK endian conversion functions.
Change-Id: Id49b87f2e536c68f0d5d567e78e1990c0a37ef14
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the NQN validation into the subsytem creation function, and fix the
allowed size to match the spec.
The spec is not clear about the allowed NQN size; for now, interpret it
as 223 bytes, including the null terminator (222 bytes of actual NQN
plus one terminator byte).
Change-Id: If9743ab2fe009d9d852e8b03317d9b38d8af18dc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will be useful outside of the SCSI code, so put it in the common
string utility file.
Also reorder the parameters so they match the order used in strncpy().
Change-Id: I9e25a59b64e4bedf04e5a96de463b1d8aa0ddac3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Clean up the poller and only then free the associated subsystem's
memory. This prepares for future dynamic subsystem creation/deletion.
Change-Id: I9e56cbf8822814930fdbb662095c51b6ad40fbc4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Allow some time for the iscsiadm login command to finish before trying
to find the attached SCSI disk. This makes the reset test consistent
with other uses of iscsiadm.
Change-Id: I9521a41b51956643a437fcaccceefd256fb4b609
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
assert is part of the C standard library and is available
on any platform we'd consider porting to. Don't put a
wrapper around it.
Change-Id: I0acfdd6a8a269d6c37df38fb7ddf4f1227630223
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
pthreads are widely supported and are available on any
platform we currently foresee porting to. Use that API
instead of attempting to abstract it away to simplify
the code.
Change-Id: I822f9c10910020719e94cce6fca4e1600a2d9f2a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
pthreads are widely supported and are available on any
platform we currently foresee porting to. Use that API
instead of attempting to abstract it away to simplify
the code.
Change-Id: I28123d427ea8da07c6329b0233f0702f2d85c2a0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Comments are not allowed in the JSON RFC, but some JSON libraries accept
JavaScript-style comments.
Add a flag that enables non-spec-compliant comment parsing.
Change-Id: I9dfb66bb46ecff1a22d8af5a9c50620686a4707c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows live configuration of the target, much like
the iSCSI target. More function calls will be added
over time.
Also, make the tests wait until the target is listening
on the RPC port to determine that the target is ready.
Change-Id: I8f762e49511d482ef820f6b25a7d3ad9a8bb41f9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The user can now specify a maximum delay, in microseconds, that
defines the maximum amount of time a reactor will sleep for
between polling for new events. By default, the time is 0
which means the reactor will never sleep.
Change-Id: I94cddb69c832524878cad97b66673daa4bd5c721
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Add slightly better statistics to get a range of values instead of just
the average.
Change-Id: I159994dce38412755afdd8980030c407125957e9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure any partition tables or other random data on the disks is
cleaned up before running the tests, rather than trying to clean it up
on failure when the system is in a potentially bad state.
Change-Id: Ia2119485aee6a50243744328dff2314d7a72adad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This leaves more flexibility for future changes to the poller
representation without requiring API changes (after this one).
It also prevents the user from accidentally using poller fields in a
non-thread-safe way, since they can't be accessed directly anymore.
Change-Id: I7677d5b93668665d29ae39c5e0ba74333ad3f878
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Report the maximum admin queue size correctly.
Change-Id: I52cad654bf59806e0abb8d869c22973647056617
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
We are already testing bdevperf in the previous 'verify' test, and the
I/O splitting is handled by the NVMe-specific tests, so shorten the bdev
tests somewhat by only doing the large I/O bdevperf test in the nightly
test run.
Change-Id: I33439be4553ea94127e2039069dd7f58162e5d0f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the long verify to nightly testing only, and make the other FIO
invocations shorter.
Change-Id: Ic09b88aa16ad2ce62113821ad0c66dbf44a5721e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a step towards enabling sharing SPDK NVMe
device access from multiple processes using DPDK's
multi-process framework.
Change-Id: I57d5eec158b42addc1036bd2583596471a467a95
Signed-off-by: GangCao <gang.cao@intel.com>
Similar to our NVMf target, this is an iSCSI target that
can interoperate with the Linux and Windows standard iSCSI
initiators.
Change-Id: I6961c5ef99f7b161c396330ed5b543ea29b0ca7b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Allow pollers to be scheduled to be run periodically every N
microseconds instead of every iteration of the reactor loop.
Change-Id: Iaea3e98965d81044e6dc5ce5f406bcb7a455289e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Combine the necessary functionality with the main bdev file.
Change-Id: I96d796bc87ac2a8688cdf1fd3c16d2a7c8aef730
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
We reported virtualized NVMe devices through NVMe over Fabric specification,
with 1.2.1 NVMe version. For direct mode, the NVMe device maybe has lower
version, such as 1.0, the identify namespace list can not support in those
devices, so we need to add helper function here to simulate such commands
from initiator.
Change-Id: I226f4f34bf61017f538d2dd80332f1d054a501f1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
No need to do read and writes plus verify - the verify is
a read itself.
Change-Id: I28d08717e49b1327b04490810f8e6069504173c2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a much simpler approach and is only slightly
less efficient.
Change-Id: I909de376d576a74156c1be447e90e7dbc240f025
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These can be simplified and merged into the subsystem.
Remove the concept of mappings from subsystems and replace
it with a list of hosts and ports. The host is optional -
not specifying a host means any host can connect.
Change-Id: Ib3786acb40a34b7e10935af55f4b6756d40cc906
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change the Port configuration file entries to a new format:
[Port1]
Listen <transport> <address>:<service>
Initially, this still only supports RDMA, but the new format will allow
specifying other transports once they are added.
Change-Id: Iadfd19b91db57b571064379368dbe77204ccecbb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMf target is being refactored to split the RDMA transport-specific
code into its own file. Once this is complete, we should be able to
plug in other transports and build the NVMf target without any RDMA
dependency if desired.
To enable this, change the CONFIG option to RDMA; it still controls
whether the whole NVMf target is built for now, but once the RDMA
dependency is actually made optional, we will be able to build the
generic NVMf target code without libibverbs installed.
Change-Id: I8cd90a9aaa85dcefcc9b0f8f2e7b6af21958b2a8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This never really made sense, so replace it with a list of
subsystems.
Change-Id: Ie7a9400083c091ac7142d01c23948200f515bdf7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is just extra complication for no real benefit.
Change-Id: I528af98e799d0641e753390fe35ff561fa3d7d76
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a bit heavy handed, but really make sure all
activity has ceased.
Change-Id: Iaa1ce16fd9e059f9eaec6712226344d69075b243
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
There's no benefit of reloading the NIC drivers (unless the drivers
themselves are buggy), so save some time by skipping the rmmod of
drivers we are about to load.
Change-Id: I05c3fd06042a2e06333d0cac123d24e6cce65b23
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Only nvme-rdma should be loaded as part of the NVMf testing.
Change-Id: I232363bf0988ea9bd99a37df27c39cc8e9732ad5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Inline function that is only called once.
Fix == bashism.
Create the filesystems on the partition created by parted rather than on
the raw namespace block device.
Add 'sync' invocations to make sure data gets flushed to the block
device we are testing.
Drop the copy-pasted FIO cleanup code (filesystem test does not run
FIO).
Change-Id: Id47d68db208a618841291c4184824031476268f1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
