Those spdk threads were neither used nor tracked in event framework.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1becee6390e172a10e08754703e018f7c44e30df
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6213
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_vhost_init() relies on having a thread on each reactor.
Every vhost controller could be created on the same core and
even passing --cpumask when creating would not affect it.
This has happened before, see patch (7cc83b62).
This patch modifies the g_vhost_core_mask to match the actual
cores in use.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I42a07c5f99690bfa4ecd2a5b9b7b04d1aa7d2800
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6188
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Documentation for vhost target states that CPU mask must be a subset
of application CPU mask. This wasn't enforced right now and allowed
the cpumask on controller creation so long as at least single
CPU core overlapped with application's CPU mask.
This might have been misleading and covered up user configuration errors.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I03f959ec37efd0be9b98cff9c93c5f996b04af35
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6212
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As of DPDK main commit 682a6454 ("power: add ethdev
power management"), rte_power depends on rte_ethdev.
So add rte_ethdev library, but only on Linux since
that is the only place where we use rte_power.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibc3473d6ec75c14a8c0c5517616950017cb2ea96
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6210
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Add the real support in nvme tcp transport.
Change-Id: I2aa9b0284d6fe009925e67f602a055e787f77987
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5734
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch is used to add spdk_nvme_poll_group_get_optimal
public API.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Iee34c89e0e1ff1f81167b18e198c144ca28f71de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3311
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This reverts commit 72eed604b4.
spdk_vhost_init() relies on having a thread on each reactor.
Without the revert, every vhost controller is created on the same
core and even passing --cpumask when creating does not affect it.
Proper fix would be to change spdk_vhost_init(),
but would require additional testing. For now revert the patch
that spawned always idle threads.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0dbd6c9fe1d9d23ada260da8fc7b48086223c632
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6186
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Recently, we discovered that under the SPDK + UIO mode, it is possible that vm may be wrong when doing io.
such as:
[root@VM_6_151_centos ~]# mkfs.xfs /dev/vdc
meta-data=/dev/vdc isize=512 agcount=4, agsize=234421142 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=1 finobt=0, sparse=0
data = bsize=4096 blocks=937684566, imaxpct=5
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal log bsize=4096 blocks=457853, version=2
= sectsz=4096 sunit=1 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
bad magic number
bad magic number
Metadata corruption detected at xfs_sb block 0x0/0x1000
libxfs_writebufr: write verifer failed on xfs_sb bno 0x0/0x1000
the github issue link: https://github.com/spdk/spdk/issues/1738
After investigation, we found as below:
The qemu set to VHOST_USER_SET_MEM_TABLE then call vhost_user_set_mem_table(dpdk version spdk-20.11)->mmap(without MAP_POPULATE)
the mmap will only return the virtual address not map the virtual address to the physical address actually.
after call vtophys_notify->vtophys_get_paddr_pagemap, we will get a wrong physical(the virtual address we not access)
So this patch is to set MAP_POPULATE during we use SPDK + UIO.
Signed-off-by: andypma <andypma@tencent.com>
Reviewed-by: Zhigang Lu <tonnylu@tencent.com>
Reviewed-by: Xun Ni <richardni@tencent.com>
Reviewed-by: YuZhoujian <windyu@tencent.com>
Reviewed-by: LuWeiKang <luweikang@tencent.com>
Change-Id: Ib921b6d7381f46bb5894ed787cef52e02524197a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5970
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since iWARP doesn't support CQ resize, we can't
accept new qpairs when CQ size is insufficient.
In other case if we accept new qpairs we can
et CQ overrun and receive IBV_EVENT_CQ_ERR ibv
async event. In that case we will have to close
all qpairs that use this CQ.
Part of the fix for issue #1747
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I30b9163a7c8abb8651f8813c6bbdb80000741c9c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6106
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
When SRQ is enabled, all qpairs share common pool of
rdma requests and we should check that rdma_req which
cid matches belongs to the correct qpair.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I2505ca39c5110e8e67a48abbe34b6df9ff00229f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6110
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Additionally, the user can specify a namespace to also pause during the
operation.
This allows for the management of hosts, listeners, and the addition of
namespaces all while I/O to other namespaces is occurring. Pausing a
specific namespace also allows for the removal of that namespace without
impacting I/O to other namespaces in the subsystem.
Change-Id: I364336df16df92fe2069114674cb7a68076de6fb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4997
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We want to avoid an active for_each_reactor operation
while the reactors are being shut down.
Fixes issue #1766
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I30bc258c5b22545320080d269a1ed8cb0b4e12f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6104
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The data path for PCIe and vfio-user transports are almost
same too, so move the code from nvme_pcie.c to nvme_pcie_common.c,
so that these APIs can be reused by vfio_user.
No logic change for this patch.
Change-Id: I82f480bba3bae0ce35e2a98f29839081095f7d50
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6040
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
dpdk_governor (and therefore scheduler_dynamic) use DPDK
env. It should not be compiled in non-DPDK env.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I6b7cf15cf7383e6c1e77bfb188b24cabcc1f0fe1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6102
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using reactor once insteads of target to fix this warning.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I30cd6be26669fe1b2c5d694c15bfda223efd3b85
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is a chance that admin qpair is being destroyed at
the moment when IO qpair is added to a controller due to e.g.
expired keep alive timer. Part of the qpair destruction process
is change of qpair's state to DEACTIVATING and removing it
from poll group. We can check admin qpair's state and poll
group pointer before sending a message to poll group's thread
and fail connect command.
Logs and backtrace from one CI build that hit this problem:
00:10:53.192 [2021-01-22 15:29:46.671869] ctrlr.c: 185:nvmf_ctrlr_keep_alive_poll: *NOTICE*: Disconnecting host from subsystem nqn.2016-06.io.spdk:cnode1 due to keep alive timeout.
00:10:53.374 [2021-01-22 15:29:46.854223] ctrlr.c: 185:nvmf_ctrlr_keep_alive_poll: *NOTICE*: Disconnecting host from subsystem nqn.2016-06.io.spdk:cnode2 due to keep alive timeout.
00:10:53.374 ctrlr.c:587:41: runtime error: member access within null pointer of type 'struct spdk_nvmf_poll_group'
00:10:53.486 #0 0x7f9307d3d3d8 in _nvmf_ctrlr_add_io_qpair /home/vagrant/spdk_repo/spdk/lib/nvmf/ctrlr.c:587
00:10:53.486 #1 0x7f93077ea3cd in msg_queue_run_batch /home/vagrant/spdk_repo/spdk/lib/thread/thread.c:553
00:10:53.486 #2 0x7f93077eb66f in thread_poll /home/vagrant/spdk_repo/spdk/lib/thread/thread.c:631
00:10:53.486 #3 0x7f93077ede54 in spdk_thread_poll /home/vagrant/spdk_repo/spdk/lib/thread/thread.c:740
00:10:53.486 #4 0x7f93078366c3 in _reactor_run /home/vagrant/spdk_repo/spdk/lib/event/reactor.c:677
00:10:53.486 #5 0x7f9307836ec8 in reactor_run /home/vagrant/spdk_repo/spdk/lib/event/reactor.c:721
00:10:53.486 #6 0x7f9307837dfb in spdk_reactors_start /home/vagrant/spdk_repo/spdk/lib/event/reactor.c:838
00:10:53.486 #7 0x7f930782f1c4 in spdk_app_start /home/vagrant/spdk_repo/spdk/lib/event/app.c:580
00:10:53.486 #8 0x4024fa in main /home/vagrant/spdk_repo/spdk/app/nvmf_tgt/nvmf_main.c:75
00:10:53.486 #9 0x7f930716d1a2 in __libc_start_main (/lib64/libc.so.6+0x271a2)
00:10:53.486 #10 0x40228d in _start (/home/vagrant/spdk_repo/spdk/build/bin/nvmf_tgt+0x40228d)
Change-Id: I0968eabd1bcd532b8d69434ad5503204c0a2d92b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6071
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
When using interrupt mode we can have a situation
when we create thread (which is always busy) with
a particular core mask, but this thread will be
scheduled for different core, because core
pointed by thread mask is in interrupt mode.
This thread will never be moved by scheduler
to correct core because currently scheduler
do not move busy threads.
This change makes scheduler to move busy threads
if their mask do not match core on which they
are executed currently.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I35abdc91b197f1b9d40e491f964d31debad72fa5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6073
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function will be useful in upcoming patch.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I2a79305b8cb155a94c83b4baa3f5d7014cb602c9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6079
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Save CPU resources by switching reactors w/o any
threads to interrupt mode.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibd1c1d50d1f6c6d7ed226d585e14999c2fd04621
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5456
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_reactor_set_interrupt_mode will send event to set
reactor into interrupt mode or poll mode, also set every
notify_cpuset on all reactors for consistency.
It can be used by RPC method or scheduler to set
reactor to interrupt mode while workload is lightweight.
Currently, this function is limited that the specific
reactor should have no attached spdk_thread.
Change-Id: I7e8f449bff1184b9a7948f80b9572066a19da60f
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5853
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently, spdk_thread can't get executed on reactor
which is in interrupt mode but interrupt of spdk_thread
is not enabled. So avoid schedule spdk_thread on it.
Change-Id: Ib37d1585f173ed3be8def83cd18aef65e287361c
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5852
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Each bit of the cpuset indicates whether a reactor
is going to be in interrupt mode.
Each spdk_cpuset is allocated to each reactor. So it
can only be touched by its reactor.
Change-Id: Ic186de341588b701d7471bf09336309d28b1bf4e
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5850
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
A ctrlr disconnect (due to EN=0 or SHN) results in
async operations that we need to make sure don't
complete after the associated controller has been
destructed. So make sure we do not start the ctrlr
destruct if a disconnect is in progress. We can
basically just continue to send the destruct message
to itself over and over again until the disconnect
has finished.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id722ad206c0dde26ee013dfd98815af3901a9cac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6057
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Currently we fetch the value from the transport
via the admin_qpair. But there are corner cases where
the admin_qpair may be disconnected after an EN=0 or
shutdown process has started.
We could do something like detect if the controller
is being destructed before starting the association
timer, but I think just saving the timeout value in
the ctrlr is a bit cleaner.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaf4ceb2f9d38cee3c9a258e1fdf367972030fbe9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6056
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
When start spdk_tgt with json config file, if the file cannot be read,
there is no error message indicating what is wrong.
Change-Id: I4e0cbad5fb7a23b99f05ebdce7d0801eebbd63f7
Signed-off-by: Rui Chang <rui.chang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We need add the abort support if the nbd state is
NBD_DISK_STATE_SOFTDISC.
Change-Id: I137b71d8f68005b78b9065a16056dbab71d33acd
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6038
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
For the purpose to fix issue #1754, APIs are changed, so
also apply the new APIs for SPDK NVMf vfio-user transport.
Change-Id: Ic41ba78a8efca83d7d63c321a27b1c63bfaf22be
Signed-off-by: John Levon <john.levon@nutanix.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6059
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Those spdk threads were neither used or tracked in event framework.
Needed to edit hardcoded cpumask value in spdkcli test to accept any string.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ieffea1bdf467f50ec0bd3af4b17a1d259fd876b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Added rpc to get name and period of currently set spdk scheduler
and name of currently set spdk governor.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I5562a81a7f9e4879bd48a765c9467f70b43f73ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5917
Community-CI: Broadcom CI
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The VFIO container must have at least one device present to
be able to perform DMA mapping operations. Instead of using
the count of SPDK devices, use the count of DPDK devices. This
allows for the user of SPDK's memory management APIs even if
only a DPDK device is attached.
Change-Id: Ie7e21f09bdf1cdf1a85424c35212f64f24ae4e26
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will be helpful in upcoming patches for changing
interrupt mode (when reactor have no threads).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I4902d0bd26f27db2b98dc4ca4fd4df934f59d9a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5450
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
We don't want to make main core 100% busy, so don't
move thread to it if thread busy time is higher than
main core idle time.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib521ac0d8959ec8062322ff7b2ad587d85ccada5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5638
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Use DPDK based governor to change first core frequency
in dynamic scheduler. Core frequencies are adjusted
based on relative usages.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibeb9ca59fd67df27cfb0bfe752e66e5eef41b126
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This scheduler will group idle threads on first available
core and balance busy threads on other cores.
Change-Id: Ia0425c767dc3da2a66a9d82a20a0012fac83163c
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3901
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This field will be used in upcoming patches
by scheduler to keep a history of threads
statistics. Base on those scheduler will
be able to calculate how busy a thread is.
Also we have to save the value of this field
while rescheduling thread.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iffbd1f946e1d159ec7277a39bc30161e71722456
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5972
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Intel P55XX SSDs can support SGL feature but can't use Dataset Management
command with SGL format, so add a quirk here for now, if the limitation was
fixed in future, we can remvoe this. Also SPDK doesn't privoide scatter buffer
API for DSM, so using PRP with DSM is totally fine.
Change-Id: Ibe92f4deb5b8bc2077115f5b7244bc17be4f3b23
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5858
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
No need these returns at the end of void functions.
So remove them.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I8889745f3ef82af513d03259a77a33c1f4f536cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6015
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The Zone Append command is an optional command in the Zoned Namespace
Command Set.
Zone Append differs from a regular write, in that the command is not
given an exact LBA of where to write the data.
Instead the user has to set the zslba field to the start of a zone,
and the data will be appended to that zone.
The actual LBA where the data was stored is returned in the
spdk_nvme_cpl, where Dword0 contains 31:00 of the ALBA field,
and Dword1 contains bits 63:32 of the ALBA field.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Iabae1b3456bfbb62c07b63d79afe9a14e460fe83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6013
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Create a _nvme_get_host_buffer_sector_size helper function,
to avoid the same code being duplicated in several functions.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I8c14683c683a44e03c97eefa186833831f754bcc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6035
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It does not make sense to send in check_sgl == true,
when we are calling _nvme_ns_cmd_rw() with a payload
of type NVME_PAYLOAD_CONTIG.
_nvme_ns_cmd_rw() simply cannot "check SGL" if the payload
is not a SGL. Doing so regardless just makes the code harder
to read.
We still send in check_sgl == true, when we are calling
_nvme_ns_cmd_rw() with a payload of type NVME_PAYLOAD_SGL.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I56d49a2abf7819d20cf5974c9e0df8f04f1ccd10
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6009
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The following common transport opts are missing:
num_shared_buffers, buf_cache_size, dif_insert_or_strip
Change-Id: I1c9c33bb1b46e2babb61c290a0187f08a5acacad
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6004
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Socket request has iov vector of limited size and when
DIF insert of strip feature is enabled we send each data
block as separate iov element to remove metadata.
In the case of large read operation there might be not
enough iov elements to describe all data block. In this
case we can send several C2H PDUs.
To estimate the number of bytes that can be written
with single C2H we try to fill socket iovs. That is
not so cheap operation so this fix is implemented
for DIF case only. Also data buffers in regular
read operation should always fit into socket iov
vector.
Fixes issue #1674
Change-Id: Ie7197f96175ecc0a760d91d35b668512432ef7a7
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5968
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
In the next patch this member will be used to track
both read and write offsets
Change-Id: I852125ff35257f9821ddf4a641d96afb29ebf0a0
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5924
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Users can now generate the necessary linker args for their
own applications using something like:
PKG_CONFIG_PATH=build/lib/pkgconfig pkg-config --libs spdk_nvme
Dependencies between libraries are included in the generated
.pc files, so the user only needs to pass the top-level subsystems
or individual SPDK libraries they are using in their application.
Modules will automatically be added to the output if the associated
library is specified. For example, specifying "spdk_bdev" will include
the libraries not only for spdk_bdev, but also all of the bdev modules.
Users still need to supply the -Wl,--no-as-needed or -Wl,--whole-archive
flags. They cannot be added to the .pc files without increasing the length
of the argument string by a factor of 15x to 20x.
Modify the test/external_code/hello_world Makefile to use pkg-config to
ensure this gets tested at some level in our autotest environment.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie48a75f11969d5d775d514cf10bcb82d197eabfd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4371
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When NVMf target linked with vfio-user library, we can use
vfio-user client library to connect to the target.
Here is the three examples that can work with target:
identify -r 'trtype:VFIOUSER traddr:/var/run/muser/domain/muser0/8' -g
perf -r 'trtype:VFIOUSER traddr:/var/run/muser/domain/muser0/8' -g -q 1 -o 4096 -w read -t 10
reconnect -r 'trtype:VFIOUSER traddr:/var/run/muser/domain/muser0/8' -g -q 32 -o 4096 -w randrw \
-M 50 -t 10 -c 0xE
You can run the following test script test/nvmf/target/nvmf_vfio_user.sh to have a quick test,
currently enabled with NVMe Identify,Perf,Reconnect tools.
Change-Id: Ieb9842b2f372184fffbf7f23e4aad26feb47c350
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3839
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Libvfio-user assumes the memory translation is IOVA=VA mode,
since SPDK CI is running inside a VM, the memory mode is
IOVA=PA mode, so when testing NVMe vfio-user transport inside
a VM spdk_vtophys doesn't work with libvfio-user, so here
we add a function to return memory address based on TRTYPE.
Change-Id: I11d1c87197f7bbfc243b6bf368795c9a74bd1303
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5958
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
