When users don't enable hotplug option in their configuration
section, SPDK will enable it by default. DPDK will print probing
messages continuously for NVMe devices which don't belong to SPDK.
Change-Id: I8c43335a282ecba206b4b5305bd881d2bd07836e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/374486
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
PAGE_SIZE is the host memory page size, which is irrelevant for the NVMe
driver; what we actually care about is the NVMe controller's memory page
size, CC.MPS.
This patch cleans up the uses of PAGE_SIZE in the NVMe driver; the
behavior is still the same in all cases today, since normal NVMe
controllers report a minimum page size of 4096.
Change-Id: I56fce2770862329a9ce25370722f44269234ed46
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374371
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added mutex to synchronize vdev access from external threads.
This is the next step towards fixing synchronization issues
between vhost reactor, RPC, and DPDK.
Change-Id: Id4b52658e05d02c479618ae0e5b5e58af2f02789
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371175
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
new/destroy_device implementations in particular backends now take
spdk_vhost_dev pointer.
This patch is a first step towards fixing synchronization issues between
RPC and vhost reactor. See the next patch which introduces generic
vhost mutex in vhost.c.
Change-Id: I448492330734726c21189f71ec7a9a8ed81c8195
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/372073
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Try to do the same as DPDK does: volatile write on used->idx and memory
barier before reading avail->flags.
Change-Id: Ibe4629a8228a02088913593ac9b32de56a60b062
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/373578
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I82afad8a8607d4cd12e2e13c763fb5ecb041bb4a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373663
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Report the Ceph pool and RBD name in the get_bdevs output for RBD bdevs.
Change-Id: I0e9be0b540e90503ce052c968f979b5887673c24
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373416
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
An optional field was added in NVMe 1.3 to indicate the optimal I/O
boundary that should not be crossed for best performance. This is
equivalent to the existing Intel-specific stripe size quirk.
Add support for the new NOIOB field and move the current quirk-based
code so it is updated in nvme_ns_identify_update().
Change-Id: Ifc4974f51dcd59e7f24565d8d5159b036458c6e5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373132
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
replaces all references to strerror in the spdk lib directory with
references to the thread safe strerror_r
Change-Id: I80d946cce3299007ee10500b93f7e1c8e503ee41
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/374012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is one scenario, when one large read IO is splitted into several
subtasks 1 - N, and the subtask N return successful, it will be stored
in the subtask_list of primary task, but the other tasks could return
error, then when we try to return the subtask N, it will failed, this patch
will make sure the large read IO command return correctly if any of the
subtasks failed.
Change-Id: Ie6bcb79a081acf30f4e4c177c0f7568495ff2b71
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/373450
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I4797e3900eb425f8cddec1543a4612d4d98e07a6
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/372990
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
From the exising code, the comparison should + 1.
Suppose offset = 2^19, we still can be fit into
tree with level =0, since there will be 64 buffer,
each with size 2^18, so we do not need to
increse the tree level.
Also a unit test is added to demonstrate this.
Change-Id: I95d3542b0881aa7bb661bc57bc789cc4ef4e7509
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/372396
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The code can be merged into cache_free_buffers
Change-Id: I5da59ae5c5ea2b91d4aecd15a611ad6731bd4c56
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/372993
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added helper function to check if vhost controller supports given
feature.
Change-Id: If20883f5dd6d5fedf7fc253239961fdb55ca51fd
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/373702
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In this iteration, we only support write_zeroes in the form of a
deallocate call that returns all zeroes.
Change-Id: Ica837ce70672174df63012719de60463fdb799cf
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372005
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add functionality to the bdev layer to handle the nvme write_zeroes
function.
Change-Id: I0dadad273b28c16db5a2275f7d8d57e98253a8d3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372171
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SCSI spec says that zero transfer length shouldn't be considered an
error.
Change-Id: I98958cc393e0e487e25fdbb0eb7fc8126aff9945
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374320
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We report SPDK_WORK_BLOCK_SIZE (1 MiB) as the Maximum Transfer Length in
the Block Limits VPD. The initiator should not submit a request larger
than this; if it does, fail the request.
Change-Id: I39575cdca4555ac1f78e055a48569be3f47e4781
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373162
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6a733ab00b61866d68d584a330020b9cd29e25b8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/373840
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It wasn't used anywhere.
Change-Id: I1ea580af374c730d8e6336a6a3db6c05116e6dba
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/373839
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Port is a more commonly used term.
Change-Id: Ia85a49b8e36ab73d777a905081f1584811b8cdec
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/373838
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is one of these per ibv_context.
Change-Id: I660fed954c5a77fed9a6bda2321583ef05b30439
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/373837
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No longer directly include env_posix.cc. Instead,
use the EnvWrapper class from the public header
env.h.
Change-Id: Iab97f943d26ca9f07ad2b80f4f3706e1593f3caa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370585
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
None of these make sense as global parameters - they're
all only configurable per-disk. This is a large simplification
and removes the SCSI library's dependency on the config
file entirely.
Change-Id: I1236158a23fa49e437938c51022b13772e404561
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371598
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The transport API now allows for multiple transport
objects, so allocate them on demand instead of using
a single global.
Change-Id: I5dd35f287fe7312e6185c75ae75e2488ec8cc78e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371990
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For now, this is a name change of controller to poll_group
in the transport layer. Over time, the poll_group will
become a more general concept than a controller, allowing
for qpairs to be spread across cores.
Change-Id: Ia92a2934541ad336f462f73175d53aaaf021f67b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371775
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I10857de922d5a17131910aca92c73995ea6ab8f6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/373828
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0e8c34237acc88fb51bac56c2f99df52ec199f9b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373835
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The construct_aio_bdev RPC still accepts "fname" for backwards
compatibility.
Change-Id: Ibf44f5f3667c6de4b827f7f3f8787aff0a6c4fc9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373834
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3ac636c18d7e71e0184d4f67ec54a36217a11db0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373833
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Disk size in bytes is only used within create_aio_disk(), so we don't
need to save it in the struct file_disk context structure.
Change-Id: I63d230448a67c2b49c57eac2b4d44dce27c303cf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373832
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a file-backed AIO bdev to test it out.
Change-Id: Ifdf206bbdf6cae9379fdc02c80755e96a7198bce
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373673
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the block size cannot be determined, just return 0 rather than
assuming 512. This will allow the caller to tell whether the block size
was actually successfully retrieved.
Change-Id: If8a2b8ce498ba6de18238baedb62c8972cb32a74
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373671
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Completion routine for reading superblock was not updating
the bs struct with the superblob id thus it would have
failed to be persistent from the application's perspective.
Change-Id: I4aa51ebe73315e9be7e08f82340b03f0e3836df7
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/373406
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
A single warning message is printed instead.
This is required for VMs which have memory mapped virtual devices. (e.g
NVDIMM in Clear Containers). This memory won't ever be used by guest
kernel for IO processing.
Change-Id: Ie24501acbdb3ba0d67bd29b146a09b222451427d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/373224
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
If a bdev-based controller is partially set up but then needs to be torn
down due to an invalid configuration, the nvmf_bdev_ctrlr_detach()
function could try to put a NULL spdk_io_channel.
Add checks to avoid releasing resources that weren't allocated yet.
Change-Id: I779c80f4dc654af3c4b0a49d8d216e13ab5f8333
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373390
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ia2202eadfb8140b7a51dd64d4241e85aceff361c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373408
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All strings decoded by spdk_json_decode_string() need a corresponding
free() statement.
Change-Id: I5896eada11deed791c5f1579db992aa382e02f82
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373404
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I29a46cbaef20e15173781680a62bc8087ca5672f
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/372426
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There are now three simple functions on the transport:
listen(transport, trid)
stop_listen(transport, trid)
accept(transport)
This makes the code quite a bit simpler.
Change-Id: I550343a084b5c095240703952c8c07ae535b5c16
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371774
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Instead of scattering direct calls to the function
callbacks throughout the code, add some wrappers.
This will make some later refactoring marginally
easier.
Change-Id: If735089967e3ce828dcff68f2430e7810bf2f123
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371749
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Create one transport per nvmf target. Today, there is just
one global nvmf target, but this paves the way for multiple.
Change-Id: Iaa1f8c5e7b3c1e87621ef2a636c68c2dd8fd929e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371748
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This also changes the SGL -> PRP case to translate each 4K page from
virtual to physical, in case the buffer is not physically contiguous.
Change-Id: If027f9d656c52c56504f0c64cd4464e16440df63
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/371616
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Match the terminology used in the NVMe-oF specification,
which is queue pair. For the RDMA transport, this maps to
an RDMA queue pair, but may map to other things for other
transports. It still is logically a "connection" from
a networking sense.
Change-Id: Ic43a5398e63ac85c93a8e0417e4b0d2905bf2dfc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371747
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is just a rename - the functionality hasn't changed.
Use the same terminology as the specification (which is controller)
so those familiar with the specification can more easily
approach the code base.
This is still conceptually equivalent to a "session" in the
networking sense.
Change-Id: I388b56df62d19560224c4adc2a03c71eae6fed0d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371746
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Unmapped blocks on some older nvme devices will read zero even if the
device does not explicitly define the unmap behavior.
Change-Id: Ia825a406cbd01f89192c300cfe35013fb4aed715
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372006
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ib6245e981d550e951a518176730a0e8d88378207
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372341
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ia45d356fbc2c4baea86a96eb28264f104f593a9c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373156
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove the redundant sector size check; the generic bdev code already
checks for this.
Also use the bdev blocklen field for both offset and size calculations.
The bdev blocklen is the same as the namespace sector size.
Change-Id: Ia8061eb4cfc229d4b6fbe2caabf2dd81656bc697
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372862
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I33506d6b9ff09c45c057326f7339d742eebc45b4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372861
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Swap the meaning of the return value to match the name of the function.
Change-Id: I89dc09e3b309a06586adf2ab750092f06077ffd9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372859
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9134ffcb9713e0613de61d3178940390291dc287
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/372621
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe-oF target was written before we defined
spdk_nvme_transport_id. Now that we have it, go back
and replace all of the locations where we individually
tracked traddr, trsvcid, trtype, etc. and use a trid.
Change-Id: I84334a12c7581f414c1e84680f122fe885a3b9dd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370744
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ie05f58e677107072fea6cc7702bab47a077cb595
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370743
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I0705e9f203e3cb905bf2e6a7bfc72bbb424a6180
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/372644
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Some macros depend on others, so we change to
change it and it will avoid potential wrong change
only one value
Change-Id: I2490064a19adc5cbd03a2c231d5f14fbf5b95792
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/372217
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is far simpler, although it does limit the bdev
layer to unmapped just one range per command. In practice,
all of our code reports limits of just one range per command
anyway.
Change-Id: I99247ab349fe85b9925769e965833b06708d0d70
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370382
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows the library user the flexibility to use a different
threading model.
It also provides a way to indicate when the connection is closed so the
app can cleanly shut down.
Change-Id: Ibc196c0b8334fcb8f50d0233def16c6acf3c90d6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372377
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use the CRC32 CPU instruction, if available, to optimize the iSCSI
CRC-32C calculation.
Change-Id: Ifb706528c28f5e6921ebf525274b959d8cac85a0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370766
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Factor out the iSCSI and GPT CRC32 functions into generic library
functions.
Change-Id: I1f1a5f3968a983b663a51bd984500492eeb12605
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370765
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id004e06eea8dfb5d7be24282bfe4d31069ff6573
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371025
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Just code movement, no changes.
Change-Id: Ie4eba079a6a9eae7632c784985cccb9bd18cd3a6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370757
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8cb413cd18b738438f1b1b3e00a438e1323e8b1f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/372170
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The value for lba_count is stored in a 0-based 16 bit register. here we
confirm that the value passed to that register is no larger than 2^16.
Change-Id: I234e55fc2b61338444dfe8f734e76f958d1f0443
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372370
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
1) Rename _nvme_ns_cmd_split_sgl_request to
_nvme_ns_cmd_split_request_prp.
2) Add _nvme_ns_cmd_split_request_sgl. This
function will be used with controllers that
support SGL, to make sure the request does not
span more SGEs than the controller or supporting
software supports.
While here, add a useful error message for both
the prp and sgl cases, if the child_length is not
an even multiple of the lba size.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifd04aee3c571359009260fe46400ce1844511aa3
Reviewed-on: https://review.gerrithub.io/372359
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For pcie, this just equals the number of SGLs we can fit
into the per-tracker memory.
For rdma, this is just set to 1 for now since nvme_rdma.c
does not support multiple SGEs yet. Once that support is
added, this will change to use MSDBD (Maximum SGL Data Block
Descriptors) instead from the controller identify data.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I34a4c546b5ff46918a296a73ed8cbcc6c9879d5a
Reviewed-on: https://review.gerrithub.io/372358
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Requests may need to be split in which case a child
request may have a size smaller than the SGE that
contains the child request's payload.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6c7ab76104d56fa9dde168cfdddb6320c7157f98
Reviewed-on: https://review.gerrithub.io/372347
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For ioq, target is supposed to respond with the same
cntlid as specified in the connect capsule, but the
Linux kernel target doesn't actually do that. It really
only needs to be set on the adminq connect, so just
do that.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4eec605f856bdad2c8614d505241566a9fe292ab
Reviewed-on: https://review.gerrithub.io/372345
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will avoid possible complitation issue.
Change-Id: I423d5e200c53cae4f8c5317d8b04e08a09c3b59a
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/371435
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
An I/O completion callback may delete the channel, so
restructure the poller to avoid touching channel memory
while triggering completions.
Change-Id: I612f10ff172481084386c9a3056fdd5e2f19e854
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370526
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change the poller to tolerate channel deletion within
an I/O completion callback. This won't happen today
because channel deletion is always deferred, but
prepare for that case.
It turns out this is simpler anyway.
Change-Id: Ibff23d84fe14247849e95cebc3c80369812bdd6c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370525
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is now only virtual mode. Virtual mode has been
improved enough to reach feature parity with direct
mode and performance benchmarks show no degradation.
Simplify the code by always using virtual mode.
Change-Id: Id5cdb5d4d8c54e661b245ed7250c2f9d66ca2152
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/369496
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prepares for enabling nbd mounting as a service within existing
applications.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I225ae20dc86b2d70a1a39a325e754b22f34feaee
Reviewed-on: https://review.gerrithub.io/369674
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Install signals by enabling new ones, not by disabling
all of them. This preserves default behavior.
Change-Id: I8d0e4753a5f321fc3756b41cd2312124fabeed29
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/372169
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Cleanly shutdown in response to these signals,
even if the user didn't provide a custom
signal handler.
Change-Id: I387bbbc0e4d848fd87ea489bae2cc79a2240d2da
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/372168
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch fix the bug for hotplug when test with write IO load which
need r2t, when the data out data pdus received at target side, the target
will try to add subtasks to the luns they are belong to, but the lun
probably invalid at this moment because we hot remove it.
Change-Id: I3d45dc6b7837944c105c2cca70e63dd4b608706b
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/371823
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
after move the spdk_iscsi_conn_handle_queued_tasks() into
spdk_iscsi_conn_execute(), we should handle the situation when the
lun has been removed and then try to access spdk_iscsi_conn_handle_queued_tasks().
Change-Id: I9ac7a5203b49274347c9ee9fbf19558ca87557ed
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/371813
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
we will retry the alloc_cache_memory_buffer outside the function if
it fail to allocate one cache buffer.
Change-Id: I276173e449e700ceb7703f68828153f566249ae2
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/371140
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9f2debc0a9404f4fc36ab307c73ead95a41cbd75
Reviewed-on: https://review.gerrithub.io/371021
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We don't actually need the socket mask.
Change-Id: Icec9e571e31f1955644b32c919e3f5a699338f0b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370722
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I93690c923feb1a78e88dd5b9d69d9e8e24fd6034
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370560
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The Linux kernel NVMe-oF target can easily be misconfigured to report
newline-terminated strings from the discovery service, since its
parameters are set by echoing into sysfs files, and echo adds a newline
by default.
Newline characters are not allowed as part of the TRADDR and TRSVCID
fields, since they are defined as ASCII strings in the NVMe specification
sense, which limits the acceptable characters to the 0x20-0x7E range.
However, we can add a workaround for misconfigured targets with trailing
newlines that shouldn't impact any valid configurations.
Change-Id: I5db183d5637128fa8d50c245f4bfa965cc3ce8e2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370593
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add a helper function to remove trailing newlines.
Change-Id: I8b1a2bf3d70ef17e0bc7e74429ac955c68cb6bcf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370592
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ic4221e044eb5af92aa06e468eb989bee285022af
Signed-off-by: Jan Kryl <jan.kryl@nexenta.com>
Reviewed-on: https://review.gerrithub.io/371303
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The protective MBR entry may not be the first one. This is already
handled correctly when comparing the total size field, but the start LBA
field was always looking at the first entry.
Change-Id: Ie54e424b2e9cb546b1ed04192662936e04e08b6b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370747
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: If3cd7ee8251b5e311d5e1e9210085f8c2cbc83e1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370746
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove unnecessary headers and order the remaining #includes correctly.
Change-Id: I6b331aa1514e55e7bf56a07be23f630e4ae3fcdb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370731
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The message printed when start_lba doesn't match the expected value
would print byte-swapped values on big-endian architectures. On
little-endian architectures, the problem would not be noticeable, since
the conversion doesn't do anything.
Change-Id: I9e8d4485b5710f4333d04bb006bc204416c689cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/370730
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2b6a22591d0a5f7435d9fd9dd8d6a1c854da3d89
Reviewed-on: https://review.gerrithub.io/371978
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
A virtio descriptor may specify a buffer that spans
a huge page boundary or even a vhost memory region.
So modify spdk_vhost_vring_desc_to_iov() to take this
into account.
While here, also change spdk_vhost_vring_desc_to_iov
to return int instead of bool. int return with -1 is
most standard to indicate failure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I71faefce0367dc9e44d70ea4429a28dd64f04c10
Reviewed-on: https://review.gerrithub.io/371756
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
