Running create/delete loop 50 times causes the test to
take over 10 minutes and time out in nightly version.
We have various code analyzer tests in place so running
the same script block over 50 times in hope of detecting
memory leak or some similar defect seems a bit redundant.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Icb2acb0ffbbe63d3004532d0b4a261152891216a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We could not restore the setting of ana_reporting because it was not
included in the JSON config dump.
Add the parameter ana_reporting into JSON config dump by adding and
using a new helper function nvmf_subsystem_get_ana_reporting().
Besides, previously the JSON RPC nvmf_subsystem_get_listeners had
ana_state regardless of the value of ana_reporting. We make it
conditional in this patch. The JSON RPC nvmf_subsystem_get_listeners
had not been used in the test code in the repository. Hence this
change will be acceptable.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4e04600c969c254e0a816d3eb34983ee951091e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9111
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Once bdev finish starts, bdev unregister is called on all
unclaimed bdevs. This means that for lvs with at least one
lvol present, there will be a corresponding bdev unregister.
Yet the vbdev_lvol module does not attempt to unload the lvs,
once last lvol from that lvs is unregistered. Leaving
the base bdev for lvs claimed.
This patch fixes that by using fini_start callback from
bdev_module to mark when shutdown begins. After that
last lvol unregistered on lvs will unload it.
Expanded struct lvol_bdev to contain lvol_store_bdev.
Closing the lvol will free spdk_lvol, so lvol->lvol_store cannot
be accessed.
Changed ut_lvol_destroy UT to ut_bdev_finish. Previous UT didn't
really test vbdev_lvol_destroy, but 'hotremove' of the lvol bdev.
In effect there is no hotremove of the lvol bdevs (only lvs bdev).
spdk_bdev_unregister() can only be called from within vbdev_lvol,
or during bdev module finish.
This UT will now check the bdev module finish.
Note that at this point lvs with no lvols will not trigger
lvs unload. Next patches in series will introduce async fini_start,
to allow for the unload.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8f51e8c1fcfdc55a5d090a3bc84ccefda813aef8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9093
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Instead of calling vbdev_lvol_unregister() hooked up
to the destruct callback, use spdk_bdev_unregister()
directly.
The spdk_bdev_unregister() is always asynchronous
and callbacks are delayed until spdk_bdev_destruct_done().
This is now corrected in the stubs.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I50683c71be80b1baa8bf3b39a05ca631ac527c2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9155
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
When specifying -C for multithread mode, we calculate
a 'blocks_per_job' to tell each core what subset of
the bdev it should target with I/O. But this
blocks_per_job, and the config->length member that it
gets copied to, were ints. For devices with num
blocks > INT32_MAX, this can cause overflow if the
num blocks is also < UINT32_MAX (because then we end
up storing a negative value in the bdevperf's length
field).
For sequential workloads, it may take a long time until
it happens, but for random workloads it fails almost
immediately.
Fixes issue #2108.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6c2b787ab5d3c6bfe12efd183ce86d4d95f9b6c6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9231
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The new API is used if bdev ext_opts is not NULL.
Change-Id: I414b5d19bff54114d6708efed89ba19b5955f56a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
These functions accept extendable structure with IO request options.
The options structure contains a memory domain that can be used to
translate or fetch data, metadata pointer and end-to-end data
protection parameters
Change-Id: I65bfba279904e77539348520c3dfac7aadbe80d9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Add a global list of memory domains with reference counter.
Memory domains are used by NVME RDMA qpairs.
Also refactor ibv_resize_cq in nvme_rdma_ut.c to stub
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie58b7e99fcb2c57c967f5dee0417e74845d9e2d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8127
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Memory domain is used to describe memory which belongs to
another address space (e.g. GPU memory or host memory)
Memory domain can be configured with callbacks to translate
data to another memory domain and to fetch data to
local buffers.
Memory domains will be used in extended
bdev/nvme API added in the following patches.
Change-Id: I0dcc7108a4fbf416a11575aa5cf5d7ec501b3d8b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8126
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
If a qpair is part of a poll group and it's not configured in the async
mode, it should be using poll group's process_completions variant.
Additionally, connecting qpairs to the poll group was moved up, so that
qpairs are already on the connected qpairs queue when waiting for the
connection to complete.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I08f75bd61a566d1ab60029b6202d9337df75733f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9074
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Replaced poll cycle count with a timeout when destroying a qpair that is
part of a poll group. Tracking the time instead of a poll count is more
stable, as the number of poll cycles can vary based on the application's
behavior when destroying a qpair.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7445bc1b411f2905aab7bf3dc7b2d3344712e1eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9200
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we are testing out-of-tree ocf builds, don't
put the resulting binary in the build directory.
An upcoming patch will enable 'make clean' to just
remove the entire build/ directory, which would
then include this ocf.a binary.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I74040fc414a5009faffaeada7fd76842b8cad38e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9170
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Number of active namespaces may change. So, on ANA log page update we
should check if buffer has to be resized.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I1720317ea7f59e5afef73d5c4bd1cd69a7dd6520
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Log page reading function 'spdk_nvme_ctrlr_cmd_get_log_page' does read
into intermediate buffer and then copy to user provided buffer. So,
there is no need for user buffer to allow DMA.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I7337afa99c3ae666cc43ea2a48317de875334cfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9177
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
async_mode option is currently supported in PCIe transport layer
to create io qpair asynchronously. User polls the io_qpair for
completions, after create cq and sq completes in order, pqpair
is set to READY state. I/O submitted before the qpair is ready
is queued internally. Currently other transports only support
synchronous io qpair creation.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib2f9043872bd5602274e2508cf1fe9ff4211cabb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8911
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_reactor_set_interrupt_mode() writes/reads from fds created during
reactor_interrupt_init(). Since spdk_fd_group_create() depends
on eventfd, this will not work for systems that do not have it.
reactor_interrupt_init() handled lack of support for eventfd correctly,
while spdk_reactor_set_interrupt_mode() did not check for it.
Reported-by: Nick Connolly <nick.connolly@mayadata.io>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5181d436636c55cca3a06b1947e944502a9204ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9131
Reviewed-by: Nick Connolly <nick.connolly@mayadata.io>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It seems some versions of blkid report improper atari as an installed
partition table on devices filled with random data. Ignore that case
for now so the tests are able to find usuable nvme device.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If6604ddf7099d3a98cfa36caab1e806d5f931886
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9143
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Types suppressed during 21.07 release cycle can now be
removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I80f95b57fd9ae07367248a91071802b48aff4866
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9128
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
refspdk is reference SPDK repository used for base in ABI tests.
When component is not present in the refspdk, but was added
in latest SPDK it is skipped in ABI tests.
Yet if the previous SPDK release contains such component already,
the ABI for it should be verified.
vfio-user flag was missing so this patch adds it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1e2c11c506deed06416aef7c0aab41d99834f92b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9127
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I9c01e786c4d9df1b5a0f61b0ab354a3fd2546672
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9085
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The current num_md_clusters doesn't include the the part before
md_start. So the bs_recover will get more num_free_clusters than it
should be. This patch can fix it.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I911926beb69aca677da508ba71f292496c917e7f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9034
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The generic transport layer still does a busy wait, but at least
the logic in the PCIe transport now creates the queue pair
asynchronously.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Change-Id: I9669ccb81a90ee0a36d3f5512bc49c503923b293
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8910
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I699227517cc44fdb99380ff76b581e9840133023
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8674
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I8f21f6f9a1cf837931646a7458f0ad8147cf6810
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8646
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
MD005 - Inconsistent indentation for list items at the same level
Fixed all MD005 errors
Signed-off-by: wawryk <maciejx.wawryk@intel.com>
Change-Id: If6a12d6dab938094394a72c804f2a028f1c40f45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8995
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It seems like there's some race in the kernel when we try to
delete_controller (nvme disconnect) right after the new nvme subsystem
is connected. This results in a block subsystem left with lingering
nvme devices which are not usable and which start to affect the nvmf
suite. They also can't be removed either unless the kernel is rebooted.
To workaround it make sure that we wait long enough for all of the
subsystems to be in a sane state before we attempt to stress
the connect<->disconnect path.
Mitigates #2060.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I9299ecfc760e334504730aab6f19d338fad88081
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9059
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The argument is meant to be SERIAL so the last check may erroneously
force waitforserial_disconnect() to report success if lsblk is not told
to include serial of the device in the output.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iee591597140658b1e611a84e65b280c565eecdfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9057
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Patch below broke the UT due to not accouting for changes
in nvme_cuse since original submission:
(19f0bfd) test/nvme_cuse: cases for stop cuse
The change was introduced with:
(d651f8a) nvme/nvme_cuse: Fix race condition in cuse session
Now when initalizing nvme_cuse controller it uses is_started,
to avoid race condition.
The UT was missing this part of nvme_cuse controller initalization.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I46344977204c3383d8f400c80bc7df50e6d7581d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9001
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In particular, non-volatile cache setup and EXTENDED fio tests:
these haven't been supported nor tested by the CI, thus there's
no value in keeping these routines anymore.
fio tests are limited to what was previously called as a "basic"
suite and hooked to standard SPDK_TEST_FTL flow.
Code which is not used by the remaining tests is removed as well.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I865da1ea4d8743322d4c303908c598efe6ecd40b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8294
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
