This never really made sense, so replace it with a list of
subsystems.
Change-Id: Ie7a9400083c091ac7142d01c23948200f515bdf7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is just extra complication for no real benefit.
Change-Id: I528af98e799d0641e753390fe35ff561fa3d7d76
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is a bit heavy handed, but really make sure all
activity has ceased.
Change-Id: Iaa1ce16fd9e059f9eaec6712226344d69075b243
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
There's no benefit of reloading the NIC drivers (unless the drivers
themselves are buggy), so save some time by skipping the rmmod of
drivers we are about to load.
Change-Id: I05c3fd06042a2e06333d0cac123d24e6cce65b23
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Only nvme-rdma should be loaded as part of the NVMf testing.
Change-Id: I232363bf0988ea9bd99a37df27c39cc8e9732ad5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Inline function that is only called once.
Fix == bashism.
Create the filesystems on the partition created by parted rather than on
the raw namespace block device.
Add 'sync' invocations to make sure data gets flushed to the block
device we are testing.
Drop the copy-pasted FIO cleanup code (filesystem test does not run
FIO).
Change-Id: Id47d68db208a618841291c4184824031476268f1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Multiple NVMe controllers within a subsystem does not work correctly,
since we would need to virtualize the controller data, namespace IDs,
and so on. For now, only allow pass-through mapping of a single NVMe
controller per subsystem.
Change-Id: Ib2d3576d2856c46a086f38eb6bec56f3e7a73575
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, we used cap_lo and cap_hi to represent the 32-bit halves of
the full CAP register. However, it is simpler to keep them in a single
64-bit structure, and is no less efficient on 64-bit platforms.
Also name the NSSRS field from NVMe 1.2, which was previously reserved.
Change-Id: I1d5d9b0dccbb12373b4aed3db29c883881d43223
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make the path to the executable shorter so it fits in the coredump.
Change-Id: I651c6cb4bd37fea51dd8e39b47a97c4edeace22f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure the reactor mask in profile take effect.
Change-Id: Ia471b2b88a711f05738cf93068c4f3a8c9a3039d
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
There is a sporadic error mounting ext4. Enable
tracing to attempt and catch it.
Change-Id: I8cb8425cbd076add0676064fccce66fdd4531b19
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
4420 is the officially assigned IP port from IANA for NVMe over Fabrics.
Change-Id: I433a5ed0780d1ffd7ca6512617759d59fa5e8def
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
NVMe over Fabrics defines its own NVMe Qualified Name (NQN) format; it
does not use iSCSI Qualified Names.
Also change the default node base for nvmf_tgt to "nqn.2016-06.io.spdk".
Change-Id: I2b73c1426ef1d8c83cc2df499d79228ea61257cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will allow removal notifications to be propagated to the library
user (e.g. for hotplug).
The callback is currently unused, but this at least prepares the API for
the future hotplug support.
Based on a patch by Dave Jiang <dave.jiang@intel.com>
Change-Id: I20b1c2dbf5e084e0b45a7e51205aba4514ee9a95
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the knowledge that both the source and destination of
nvme_copy_command() are aligned to emit the aligned variants of the
SSE2/AVX mov instructions.
Change-Id: I0a7e32a3bb10b9a1920cd85691b79fa7172eecb3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Match the expected alignment for nvme_alloc_request() and nvme_malloc()
to allow optimized memory copy code to work even in the unit tests.
Change-Id: I546692a6df9615a12a8209618fb6159a9c9e426b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also finish up the req_state -> req conversion.
Change-Id: I131dd52dcd36a790b942e06f0207a3274cc04ffc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fabric commands were skipping a step, so unify all
types of requests through the same completion path.
Change-Id: I5f38a7e1cdcdf33baf71486d5ddae9f5a6157fac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This moves some definitions from nvmf_spec.h to
nvme_spec.h based on the latest publication.
Change-Id: I51b0abd16f7d034696239894aea5089f8ac70c40
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
It is always set to nvmf_process_async_completion and is only used
within the library.
Also rename nvmf_process_async_completion to spdk_nvmf_request_complete
to clarify its purpose.
Change-Id: Ie737fb60688329bfe329a8553c4a40ff2e5f8f1d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Everything necessary for processing an admin command is now stored in
nvmf_request.
Change-Id: I74e75a5b7bb3b406ad167c2b31cab1af7a1f270a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Everything necessary for processing an I/O is now stored in
nvmf_request.
Change-Id: I3f390707ebe83ea66a116dcfda4d0388a6823629
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Simplify the build rules so that common libraries are always linked.
Also fix up a couple of -lpciaccess instances that should have been
changed to $(PCIACCESS_LIB).
Change-Id: I4c50fa3aa59cae013d3385e38fbb830794299f6e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
vtophys() was checking for out-of-range addresses incorrectly: vfn_2mb
is already shifted to account for 2 MB hugepages, but it was being
compared with a mask that did not account for the shift. This would
allow out-of-bounds access to the 128tb map array for certain invalid
addresses (it had no effect on addresses within the valid userspace
range).
Change-Id: Ida7455595e586494c9025f9ba65d050abb16b1b9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Work around an issue with the mlx4 driver.
Make discovery of NICs more generic.
Change-Id: I9701d8d7937faa299d12d7ca4bfe1c923983c263
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This enables SPDK_NVMF_BUILD_ETC to be moved out of the library as well,
since only authfile was using it before
Change-Id: I10d1145881f9a0358d7effe2d2d9851899413e1b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The section is really defining a subsystem as defined
by the NVMf specification. There does not appear to be
any need for a group of subsystems.
This change only updates the configuration file. It does
not remove all references to a subsystem group from
the code.
Change-Id: I38e62735a5ac924dcafacb3c9a332a103d751d4a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The specification refers to this concept as a Host,
so use that term. This only changes the configuration
file usage. Initiator groups are still referenced in
the code and will be removed later.
Change-Id: I897f4dbdfb65d94da1e5a77434fc07a2c18bcdc2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Put the common funcs in test/nvmf/common.sh to
reduce duplicated code
Change-Id: I1c72f6fb22d092dafb7fb134b8bb3780b5525e48
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Gang Cao <gang.cao@intel.com>
The index should be 0 for fabricintf.
Moreover, when there is no fabricintf found, error should
be returned
Change-Id: I3aa04566a5a318b8c921dd37c8573ed075254266
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
NVMe opcodes contain a two-bit field that encodes the expected data
direction for each command. Add an enum and a function to extract these
bits.
Change-Id: Ie214319f121cf0899c6aa5663866f2988b128dd2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use SPDK_CU_ASSERT_FATAL instead of CU_ASSERT_FATAL so static analyzers
recognize that g_request cannot be NULL in the following lines.
Change-Id: Ie7ab3bd34a177bea0d565441014e8db12be8bb01
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If spdk_json_number_to_int32() works correctly, it will initialize the
value of i32, but since this is a unit test, we should make sure i32 is
initialized to catch bugs.
Fixes a clang warning during scan-build.
Change-Id: Iecf0531d2992acf584b10e2de5f8c53553a9f3b6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The D3700/D3600 series support Controller Memory Buffer(CMB) feature,
CMB is available for holding submission queues, for those controllers
which can support submission queues in CMB, user can set the option
whether to enable it or not.
Change-Id: I8b0dc9e28dd6f5bb01bee99a532087212c04e492
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
When recursively calling spdk_json_write_val() on another object or
array, the child call will handle printing out the whole
subobject/array, so the parent call should skip over all of its values.
Also fix the return value for the array/object case - if we get to the
end of the array or object, we should return 0 for success.
Change-Id: I1da80c88ab8759620114c1ab141baaaaf9f0023a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Resolve relative paths before using them to clean up command lines.
This should also help shorten the overall command line length that gets
embedded in the binary and used when locating the executable from a
coredump.
Change-Id: Ibff9849ede198bb04313496c8b7131485ffaf14f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix copy of uninitialized data in the unit tests.
Change-Id: Ib71a6fc90edb07f7ddac3067ff0efbda7938bf17
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch add support for Intel specific log pages :
marketing description page.
Change-Id: I87bccb2af286279598c9dd3c870094b384a0d2f7
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
For those controllers which can support end-to-end data protection
feature, add the support in the driver layer.
Change-Id: Ifac3dd89dec9860773c850416a6116113a6ce22a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Rename nvme_remove_child_request() to nvme_request_remove_child() and
move it next to nvme_request_add_child() to make the symmetry clear.
Change-Id: I78747c44ab3db1a656b33555a45f634dc5a55b31
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This can happen if the controller is still resetting as the SPDK NVMe
driver takes control.
Change-Id: I263ae8f2e7b271e0448450557452a115c90c4fb6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is used to add a nvme_request remove child
helpler function
Change-Id: I1e5bb228d53333ca3601f4ae30fcd801ea39e532
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The next_sge callback can be called multiple times for a single I/O if
the I/O is split. Get the physical address for each element once
instead of every time the SGL is walked.
Also bake the SGL element offset into the physical address.
Change-Id: I5d83426a234ffe9d13b89621077dbbb1561181c9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also use uint32_t consistently for counting SGL elements.
Change-Id: Ibeffffdc5e0eccd11681703cd333bfb64319e164
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows us to test elements with particular (mis-)alignments without
depending on the internal behavior of the DPDK allocator.
Change-Id: I006358b82ae3a677353333954ba88d1bcfe289f6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
There's no reason to use the system-defined iovec structure; we only use
it for our internal scatter-gather callbacks. Define our own structure
so it can be extended.
Change-Id: Ifc055adfdae8cddd53e7f5d638a24f1e812b1ac6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This helps identify which iteration of the test failed.
Change-Id: I9186de08ea8217348b8ee61b0ecba4e9d7ab986e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If the controller is failed, attempting to submit additional I/O is
futile - it will be immediately failed using the completion callback,
which can result in infinite recursion if the application code resubmits
I/Os on failure.
Instead, provide a way for request submission to indicate failure, and
use it to exit early if the controller is failed; this can only happen
when a reset failed (timed out).
If a request is submitted directly by the user when the controller has
failed, we can return an error code directly. For the case where I/O
was queued and is being resubmitted after a reset, we still need to call
the completion handler via _nvme_fail_request_ctrlr_failed().
Change-Id: I9e144328d524b25db2acf48e923b584746e8d0b6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This test is only intended to validate functionality, not actual
performance, so one second is plenty.
Change-Id: I2ff198c035226b50a113f9ff189c1abbd0fd1c17
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Provide a new structure, spdk_nvme_ctrlr_opts, to let the user modify
the default controller initialization options during probe/attach.
Currently, only the number of queue pairs can be modified in this way;
other options will be added later.
Change-Id: Ie27b9429291d93a9353c0d820f0ad467d3b0e7cb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace the previous code that allocated each tracker individually with
one large allocation per queue pair.
struct nvme_tracker is now explicitly padded to reach exactly 4096 bytes
to allow normal array indexing to work correctly while maintaining the
alignment requirement that ensures each tracker's PRP list does not
cross a page boundary.
This also allows removal of the act_tr array, since the tr array can be
indexed directly now, and each tracker can store its own active state.
Change-Id: Ia7c51735b96594d12f7f478cefcc4aedc84207ad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The previous method for registering I/O queues did not allow the user
to specify queue priority for weighted round robin arbitration, and it
limited the application to one queue per controller per thread.
Change the API to require explicit allocation of each queue for each
controller using the new function spdk_nvme_ctrlr_alloc_io_qpair().
Each function that submits a command on an I/O queue now takes an
explicit qpair parameter rather than implicitly using the thread-local
queue.
This also allows the application to allocate different numbers of
threads per controller; previously, the number of queues was capped at
the smallest value supported by any attached controller.
Weighted round robin arbitration is not supported yet; additional
changes to the controller startup process are required to enable
alternate arbitration methods.
Change-Id: Ia33be1050a6953bc5a3cca9284aefcd95b01116e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This field is write-only in the current code; the NVMe library does
not track timeouts on requests.
Change-Id: I50e53bb3c299bf16912c48be8aad3eec829154af
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When I/O spans a stripe boundary, the driver splits the request into
multiple requests, so for 1 segment memory larger than the stripe
size, we also need to split the segment memory.
Change-Id: I22ea5734d7066865a57a3c90fe18d5f76f373f1d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Remove the common code that was factored out to spdk.common.mk.
Change-Id: I2a6265fa144b2c03f3484e2aa528fd1e15d13429
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add CUnit test case to verify payload_offset value in split_test4
Change-Id: I4a9a33854295ed802709bbe4f11746d284ed8cbd
Signed-off-by: Liang Yan <liangx.yan@intel.com>
Add test case which verify invalid second phys_addr would cause
_nvme_fail_request_bad_vtophys be called.
Change-Id: Id1b62e249b7192e29334bd7cab33815722f5662d
Signed-off-by: Liang Yan <liangx.yan@intel.com>
For those NVMe controllers which can support SGL feature in
firmware, we will use SGL for scattered payloads.
Change-Id: If688e6494ed62e8cba1d55fc6372c6e162cc09c3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
This will be exposed in the public API. This rename is in a separate
commit to ease review.
Change-Id: I1b7fef36f85265db27935ac4d22ceef3c7282502
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Many of the internal controller initialization functions did not check
for allocation failure; add return codes and check them where
applicable.
Change-Id: Id1b33bb06fca84035369d8b7ecd4c36b8ba7134c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function returns true if the namespace is active or false if it is
inactive (e.g. no namespace has been attached to the specified namespace
ID yet).
Also use the new function to add checks in the examples and tests where
applicable.
Change-Id: I35465b315ae1a1677c5a82191ad9b1da1c216d50
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Prepare for qpair to be exposed as part of the public API.
Change-Id: Ia63e863e95554adceeade20c829f12fe346375d5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Store each namespace's associated controller in its ns_entry structure
rather than trying to assign them during associate_workers_with_ns().
Change-Id: I679a1902d5c787e35f3afb5292342ce369f1fe52
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
