The timeout poller might still be registered when a qpair is destroyed
if we send C2HTermReq and then destroy the qpair before host terminates
the connection.
Fixes#2527
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I21acc147fdba3aaac66b0c6ed54e155195fe9816
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12844
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
We need to check that the given SQ is active (i.e. is currently mapped
into the process), so make the check the same as that in
poll_group_poll().
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ibd3babd7520f611f596f3bab15765fa13b4d6b99
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12663
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is better represented under the name vfio_user_ctrlr_intr().
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ic3fa0fe238fd8ce4930bfd3e34b9dbc1b935aa6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12662
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There's a non-zero cost to looking up the CQ; only call this function in
the poll path if we need to.
While here, we'll streamline the ctrlr-level check.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I6bf123f759fcd856196f6613cb6c7d0219550136
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12660
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Rui Chang <rui.chang@arm.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Only 4 bytes or 8 bytes are valid numbers when to access NVMe
registers, add the check here.
Fix issue #2495.
Change-Id: I63b6e16a156f6eba17f397ec9d1a447e6a80b4da
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12643
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The CSTS.SHN is changed only in shutting down the controller,
nvmf library already ensure that all the outstanding IOs will
be flushed before that, so we can remove this check here.
Change-Id: Ib93a256e986b7b2ec1da0fc7992feb3a02c1d657
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11674
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
After finishing migration in source VM, the subsystem is in
PAUSED state, the controller is dead for the source VM, we will
destroy the controller when disconnecting socket, but after that,
we should RESUME the subsystem so that it can be ready for the
next new client.
Fix issue #2363.
Change-Id: Icf0999b9085cebe8be4c8783e1a43bb13d4f7987
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11422
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The completion callback of `spdk_nvmf_subsystem_resume`
and `spdk_nvmf_subsystem_pause` can run in different
core other than the `vfu_ctx` core, this may lead to
race condition when changing controller's state. Here
we use a thread message to change it in the same thread
context.
Change-Id: I53d139adcca6ff72a3b91a2a931f1239f3271fa9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12558
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These were deprecated in 2019, it's time to remove
support for them now.
Change-Id: I3b75eea83bd7d700d20a6189e8fb6d1f066dc9b4
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12603
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Clarify via a variable name that we're dealing with the admin CQ
specifically.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I032f6b27e2d75bffb9d95481f177ce0c3655550c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12556
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Constantly polling the socket degrades performance significantly.
Polling the socket at a much lower frequency, every 1ms, is good enough
for now.
fixes#2494
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Co-authored-by: John Levon <john.levon@nutanix.com>
Change-Id: I4a7d35c45ece863b9df756324c23f41736df49f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12494
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If we don't set the cid before failing the misordered
command, we use some other random cid, causing the
initiator to think the wrong command was completed.
Fixes#2481.
For this issue, the target was completing a
previously submitted AER, not the fuzzed fused
command. The initiator would then submit another
AER to replace the completed one, but the target
complained that the initiator sent too many AERs
since the target didn't really know it had completed
an AER so hadn't adjusted its num_aer count.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4bd66f147086b262d0e48b8399d237e5ed3c2651
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12452
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_bdev_get_acwu() is a 1-based number, so we need
to subtract 1 from it before assigning the value to
nsdata->nacwu.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I32708b28a35670cba6013a48b79389fa48226285
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12399
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
ACWU is a 0's based value, and our intent is to
report that our target's ACWU is 1 block. This means
we should report ACWU as 0, not 1.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6ad0606be07fd38bc6c2e3a8e4bb78225b3dfadc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12385
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The spdk_rmb() in nvmf_vfio_user_poll_group_poll() is unnecessary: we
already have a read barrier for SQ tail updates at the per-SQ level, so
this doesn't add anything.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I88cddd968f4a949640754526e19cb869d9fb31af
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12381
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There's no need to spdk_rmb() in nvmf_vfio_user_sq_poll() unless we
actually found the tail has advanced.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I778835c527409764c3db78459b2aa76420cc0105
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12378
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
We need to keep track of the shadow doorbell buffer locations, and make
sure to re-initialize on resume.
Co-authored-by: Thanos Makatos <thanos.makatos@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If3ba456fb35f6f6199e4ff14cec1aad96775f71a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12237
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
There were a couple of places not using the standard formatting for qid
still.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If96c3f6d762128b0f274e2c4e9eebf4e80e35139
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12346
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch adds an extra spdk_thread_send_msg() call to destroy a qpair
to make sure that it isn't freed from the context of a socket write
callback. Otherwise, spdk_sock_close() won't abort pending requests,
causing their completions to be exected after the qpair is freed.
Fixes#2471
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia510d5d754baccca1e444afdb10696ab9b58e28b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As per the NVMe specification, a host can identify two areas of guest
memory: one of which is used for the host-written doorbells, and one of
which contains event indexes. The host writes to the shadow doorbell
area, but also writes to the controller's BAR0 doorbell area if the
corresponding event index is crossed by the update. This avoids many
mmio exits in interrupt mode, where BAR0 doorbells are not directly
mapped into the guest VM, with greatly improved performance.
This isn't a useful feature in BAR0 doorbells are mapped into the VM, so
we explicitly disable support in that case.
NB: the Windows NVMe driver doesn't yet support this feature.
Although the specification says that the admin queues should also engage
in this behaviour, in practice, no VM does, so have to include some
hacks to account for this.
Co-authored-by: John Levon <john.levon@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I0646b234d31fbbf9a6b85572042c6cdaf8366659
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This lets us use it more widely.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I9c67be19020677fab3eafe05c1e0f91c3d04611d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12307
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When a qpair is disconnected, any outstanding zero-copy requests are
freed to release their buffers before the qpair gets destroyed.
However, if there is a PDU being sent to the host as part of this
request (e.g. C2HData/R2T), we need to wait until that write is done
before freeing the request to avoid freeing it twice.
Fixes#2445
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2a6e82f26a4f011dfd18c55c821e9039de7e584a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12255
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This makes the flag indicate whether there's an outstanding PDU write
for a given request. Additionally, it reduces the number of places we
need to update this flag.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id7e587f84955b096c46bfbf88d4dd222214d4a6a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12254
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will make it possible to have some common handling in request's PDU
write completion.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Icaff38da0e47dd93327e3d8f09edd9fdba8f532e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12253
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When an request using zcopy is completed, it might have an unreleased
zcopy_bdev_io attached in three cases:
1) the request was a read,
2) the request was a failed write,
3) the qpair is being disconnected.
The last case was missing from the assertion.
Fixes#2425
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5cbeaa198a1fd878c98caf148a0bc47060e35bca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12263
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In a similar manner for what we do for other per IO data-structures of cmds,
cpls and bufs, use the conventional huge-pages based spdk allocation scheme
for RDMA requests and receives.
Change-Id: I4c2e86e928106e78c053f24915e2a9ce1a200c78
Signed-off-by: Or Gerlitz <ogerlitz@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12273
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
To maximize cache locality, use lifo and not fifo when managing objects
which are used per IO such as the RDMA receive elements queue.
Change-Id: Id8917558acc1bec29943fcbae6afe6b072bde6ac
Reported-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Or Gerlitz <ogerlitz@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12272
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Only FDs are used for passing them to another process,
we can unlink them after creation.
Here we only unlink the files created in vfio-user,
and there is still one file created via libvfio-user,
it will be fixed via
https://github.com/nutanix/libvfio-user/issues/660.
Partly fix issue #2449.
Change-Id: Ie27640e0cb85f44596e9d0ad5a2b67adf0419f5c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12195
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No functional change; this just makes the poll code a little easier to
read.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If6d1dcd940ed5b461856b535b1bf01c4efa8612a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
RDMA READs can cause cmds to be submitted to the target
layer in a different order than they were received
from the host. Normally this is fine, but not for
fused commands.
So track fused commands as they reach
nvmf_rdma_request_process(). If we find a pair of
sequential commands that don't have valid FUSED settings
(i.e. NONE/SECOND, FIRST/NONE, FIRST/FIRST), we mark
the requests as "fused_failed" and will later fail them
just before they would be normally sent to the target
layer.
When we do find a pair of valid fused commands (FIRST
followed by SECOND), we will wait until both are
READY_TO_EXECUTE, and then submit them to the target
layer consecutively.
This fixes issue #2428 for RDMA transport.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I01ebf90e17761499fb6601456811f442dc2a2950
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12018
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The process of matching qpair to poll group is split into
two distinct parts that occur on different threads.
See spdk_nvmf_tgt_new_qpair().
This results in a race condition for TCP between spdk_sock_map_lookup()
and spdk_sock_map_insert(), which are called in spdk_nvmf_get_optimal_poll_group()
and spdk_nvmf_poll_group_add() respectively.
Fixes#2113
This patch picks a hint from nvmf_tcp for next poll group,
which is then passed down to spdk_sock_map_lookup().
When matching placement_id exists, but does not have
a poll group assigned - the hint will be used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4abde2bc9c39225c9f5dd7c3654fa2639bb0a27f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The rdma buffer for stripping DIF metadata is added. CPU strips the DIF
metadata and copies it to the rdma buffer, improving the rdma write
bandwith. The network bandwidth during 4KB random read test is increased
from 79 Gbps to 99 Gbps, the IOPS is increased from 2075K to 2637K.
Fixes issue #2418
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Change-Id: If1c31256f0390f31d396812fa33cd650bf52b336
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11861
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Extract the code for DIF from nvmf_rdma_fill_wr_sgl() into
nvmf_rdma_fill_wr_sgl_with_dif().
Then clean up nvmf_rdma_request_fill_iovs() and
nvmf_rdma_request_fill_iovs_multi_sgl().
Additionally, this patch has a bug fix. nvmf_rdma_fill_wr_sgl_with_dif()
returned false if spdk_rdma_get_translation() failed. However, the
type of return value of nvmf_rdma_fill_wr_sgl_with_dif() is not bool
but int. The boolean false is 0 in integer. Hence in this case,
nvmf_rdma_fill_wr_sgl_with_dif() returned 0 even if it failed.
Change nvmf_rdma_fill_wr_sgl_with_dif() to return rc as is if
spdk_rdma_get_translation() returns non-zero rc.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I71cc186458bfe8863964ab68e2d014c495312cd3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11965
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: fengchunsong <fengchunsong@huawei.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
To help grep, use a standard sqid:%d style format for identifying queue
IDs.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ib82c81939f85f9beb333a4db10d006524522a1d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11822
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
As a general utility function, move it up with the others.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I32881c01afd9819c889730d7c09163c95fbb827e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11790
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For each queue, track its doorbell location individually, rather than
needlessly recalculating it every time we look up the doorbell value.
This will also greatly simplify shadow doorbell support.
Co-authored-by: Andreas Economides <andreas.economides@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I6882d2f92ee2f2b2b90c54ee14e5f6b41ecca85d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
R2Ts can cause cmds to be submitted to the target
layer in a different order than they were received
from the host. Normally this is fine, but not for
fused commands.
So track fused commands as they reach
nvmf_tcp_req_process(). If we find a pair of sequential
commands that don't have valid FUSED settings (i.e.
NONE/SECOND, FIRST/NONE, FIRST/FIRST), we mark the
requests as "fused_failed" and will later fail them
just before they would be normally sent to the target
layer.
When we do find a pair of valid fused commands (FIRST
followed by SECOND), we will wait until both are
READY_TO_EXECUTE, and then submit them to the target
layer consecutively.
This fixes issue #2428 for TCP transport.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8a9e13690ecb16429df68ae41b16b439a0913e4e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12017
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
In vfio-user transport, whenever one IO is completed, it will trigger
an interrupt to guest machine. This cost quite some overhead. This patch
adds an adaptive irq feature to reduce interrupt overhead and boost
performance.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I585be072231a934fa2e4fdf2439405de95151381
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11840
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Rename ->doorbells to ->bar0_doorbells. This will help avoid confusion
later with shadow doorbells.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Id432938cfeb3033e79dc6e1b491dad964227687a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11788
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
NVMe over PCIe Transport Spec 3.1.2:
The host should not read the doorbell registers.
Explicitly refuse these reads.
Co-authored-by: John Levon <john.levon@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ie64fd5ce7988ee86c612b3ef6046a57af467e266
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11787
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Refactor controller reset a little bit for cleaner code.
Co-authored-by: John Levon <john.levon@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I2b3323005d4e788ffe980d41c349702828886981
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11786
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If we're in interrupt mode and live migrating a guest, there is a window
where the I/O queues haven't been set up but the device is in running
state, during which the guest might write to a doorbell. This doorbell
write will go unnoticed. This patch ensures that we re-check the
doorbells after an I/O queue has been set up.
Fixes#2410
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I161d2a0e7ab3065022b2bccbe17f019640cceeba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11809
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make sure cq->group is set even in interrupt mode.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I9f722917a8e3aebbd5d66648a3909f795897ec1a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11997
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We were accidentally reading the spdk_nvme_status from the CPL; on one
test, this was contributing to 2% of cache misses.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I7c967690458a183799f8d835360800d3094c3131
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11849
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
