This patch adds a new RPC method to configure QoS on bdev
at runtime.
For example:
set_bdev_qos_limit_iops Malloc0 20000 --> Enable QoS on this
block device with 20000 IOPS rate limiting.
Change-Id: I1ee8b313b769fb5a664820f4ba827e0230be4b5d
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393255
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I6bf491bd9661d247a70d7ee323c14397cd577636
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407367
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This value was recalculated on each time slice. Instead, just
set it up right away.
Right now QoS is statically configured at creation time for bdevs,
which means we can get away with this. Once dynamic
configuration is added, events will need to be sent to the QoS
thread.
Change-Id: I8bde4170f2d882d2c0f5e57a6aa7713d045beb7d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407355
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There might be a couple of mgmt channels still
trying to use the mempool from their destroy
callback (spdk_bdev_mgmt_channel_destroy).
Change-Id: I59247bfa283dc0481923fdd4eaf8e1726e1267ce
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/408192
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
When testing whether QoS is enabled, the code previously
checked mutable values in the bdev itself. Instead, it needs
to check the flag in the channel.
Right now, QoS can only be configured statically when the
bdev is created. This means that no channels will exist
prior to QoS being turned on, which simplifies setting
the per-channel flag (only need to set it when a channel
is created).
Change-Id: I59e56c64c18c262cc2a7f71a6dde8329edb35db7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407354
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Add new optional bdev module interface function, init_complete, to notify bdev modules
when the bdev subsystem initialization is complete. Useful for virtual bdevs that require
notification that the set of initialization examine() calls is complete.
Change-Id: I0997fb5749d430f2fd3a40172ec8a1d5caa96964
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/407222
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The bdev layer has three types of channels:
* bdev channels - one per bdev per thread
* module channels - one per bdev module per thread
* management channels - one per thread
Arrange this in a hierarchy where bdev channesl point to
module channels which point to management channels. Rely
on the channel mechanism to reference count and release
resources at the correct time.
Change-Id: I9341068f95ec2a3897c5a1d897895a4f5cc49299
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406854
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is code movement only. This minimizes an upcoming
diff.
Change-Id: If2af99fdd86ca3c8ce672b9d8f5bc44a2f30cc8e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/407218
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Change-Id: Ibc43e3ee65d85a83d78d6e15457ae57992a1188a
Reviewed-on: https://review.gerrithub.io/395059
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a one line static function called from one place.
Change-Id: Ie00bbedfabf54d40a2f571bbc8d30f0ac8cbbdd6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406853
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Move this definition between the management channel and
the bdev channel struct since that's where it fits in
the logical hierarchy.
This is just code movement. No other changes.
Change-Id: I80b9909b14cad473a7768780ac9ab74a2f1309e5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406852
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We'll need the bdev channel inside this function in
an upcoming change.
Change-Id: Iadb07700ba57b23d37b7c373d0e9c5063aaed57b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406851
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
It was called module_ch and shared_ch throughout the code.
The name module_ch is better, so use that everywhere.
Change-Id: Id030f72c878f44ea4dc8ca14b936719e26e891e3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/406825
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
by placing the destroy function in the callback of the
io_device_unregister, we ensure that all channels associated with a bdev
will be freed before the bdev is destroyed. This eliminates the
possibility of an io_channel callback referencing a destroyed bdev.
Change-Id: I0dd6f53dcfa9c9c5a3c6e98a7e2ad8687da17c3f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/406248
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For application like vhost/iSCSI target/NVMe-oF target/etc,
a new section as below can be added for the QoS rate limiting.
[QoS]
Limit_IOPS Malloc0 100000
Limit_IOPS Nvme0n1 500000
Also added a sample change at test/lib/bdev/bdev.conf.in
Change-Id: I7c7d951fbe1352ca2571f135c657bc4fa43b56c7
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393221
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
As there is no I/O channel associated with the QoS
bdev channel, add the specific functions to handle
the reset operation on the QoS bdev channel. The
reset operation will be conducted on the QoS thread.
Related UT code on QoS with reset operation was also
included.
Change-Id: Ibba68ddb132fa926fec6327829157b43ac806713
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393181
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Instead of accessing the qos_channel pointer on the bdev,
always have the QoS parameter on the allocated memory of
qos_channel structure.
The bdev->qos_channel is set to NULL in the destroy operation,
and the destroy is through the async message which could
be executed later after the poller function within which
the bdev->qos_channel is accessed (thus a NULL pointer
dereferenced).
In this case, assign the memory address of the allcoated
qos_channel to the function as the parameter to solve
this issue.
Change-Id: I2fdb53cb0a6a29fb41ab28362f8e068d21ee5d12
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/405438
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There is a call to spdk_bdev_close () during spdk_bdev_part_base_free
(). This will trigger spdk_bdev_module-> module_fini () if this is the
last descriptor to the last bdev. In module_fini () resource might be
freed. But then, after spdk_bdev_close(), call to base_free_fn () is
done which may try to free the same resource again.
To avoid this, call spdk_bdev_module_finish_iter () after
_spdk_bdev_finish_unregister_bdevs_iter () return.
Change-Id: Ia6eb210504d121772221da18651a90ffc89dbbc4
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/405322
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
SPKD base bdev might be part of multiple vbdevs. The same is true in
reverse direction. So consider folowing scenario:
bdev3 bdev4 bdev5
| | |
+-+--+ + +--+--+
/ \ | / \
bdev0 bdev1 bdev2
In current implementation bdev0/1/2 will apear as base base for
bdev3/4/5 which is obviously wrong.
This patch try to address this issue.
Change-Id: Ic99c13c8656ceb597aba7e41ccb2fa8090b4f13b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/405104
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Write information needed to recreate each bdev.
Change-Id: I3d2b24fd4aaa8b98ec558d864cc28b55a899452f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401217
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Patch 583a24a4 [1] moved io_outstanding field to the
bdev_module_channel as it was needed there. This patch
re-adds another io_outstanding field to the bdev_channel.
We *do* want to count outstanding I/O for particular bdevs
- mostly for debug purposes.
[1] 583a24a4 ("bdev: share nomem_io data between bdevs built on the
same device")
Change-Id: I723e72c36447f9f778f88fc1769619676cbbaf71
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/396871
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Simplify the handling of I/O completions that need to be sent as a
message so that they are handled in a single place in
_spdk_bdev_io_complete().
Change-Id: Ic94354ad947d0f1f11241f728aa194a105ff96c4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404184
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Flip the status != NOMEM check around so that the logic is easier to
follow.
Change-Id: I607e8b5f0cfaa3598a623d0fc3642b11bd42decd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404175
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Move the commonly-accessed fields to the front so they end up in the
same cache line where possible.
Also tweak the types of type, status, error.nvme.sct, error.nvme.sc,
error.scsi.sc, and error.scsi.sk (they can fit in 8 bits), and move the
Write Zeroes splitting variables into u.bdev.
This reduces sizeof(struct spdk_bdev_io) from 272 to 224, in addition to
the better cache line usage.
Change-Id: I4a91fd07f252e7add4a2db179df9c53268672198
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404053
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We must hold bdev->mutex around all QoS channel manipulations, not just
channel_count; otherwise, there are race conditions.
Change-Id: I6183aef83f4d5789bded426a1832e3faaa688363
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403367
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The helper functions were only needed when this was sent as a message,
but they are only called directly in the current code, so just move the
contents of the functions inline to their call sites.
The unregister path can also be simplified to pass the poller directly
to spdk_poller_unregister(); it already handles the case of a NULL
poller.
Change-Id: I509cf8922b53e1e616c9e976610b20061bb50066
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403364
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be used to track time used in pollers - each poller can now
indicate if it found any work to do or not.
For cases where it was obvious and the infrastructure was already in
place, existing pollers have been modified to return 0 or a positive
value to indicate whether work was done. Other pollers have been
modified to return -1 by default, indicating that the poller isn't
indicating anything about whether work was performed. This will allow
us to find un-annotated pollers easily in the future and fix them
incrementally.
Change-Id: Ifebfa56604a38434fac5c76ba7263267574ff199
Signed-off-by: Roman Sudarikov <roman.sudarikov@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This better matches the style in the rest of SPDK.
No functional change - this is a pure find/replace of
spdk_bdev_module_if to spdk_bdev_module. Instances of this struct will
be renamed in another patch.
Change-Id: I3f6933c8a366e625fc3a1b6401aee26ee03ba69c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/403368
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Return NULL on resource failure (spdk_mem_get) instead of
abort()'ing in static bdev function.
Change-Id: I0ee2ce4b7e81cf80546119e3db27c987fa912749
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/403578
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is to add the basic support of QoS on bdev.
Including two major functionalities:
1. The QoS rate limiting algorithm:
a. New IO will be always queued first also under
the no memory condition
b. Start the QoS IO operation based on the limit
c. A poller started in each millisecond to reset
the rate limit and send new IOs down
d. The rate limit is based on the millisecond and
converted from user configurable IOsPerSecond
2. The Master Thread management:
a. Add a per bdev channel_count
b. Whenever QoS is enabled on bdev, if QoS bdev
channel is not created, create the QoS bdev
channel and assign the QoS thread
c. When new IOs coming from different channels
(threads), pass the IOs to the QoS bdev channel
through the thread event
d. When the IOs are completed from the QoS bdev
channel, pass the IOs back to its orignal
channel(thread)
e. Destroy the QoS bdev channel when it is the
last bdev channel for this bdev. Defer the
destruction if current thread is not QoS thread
Change-Id: Ie4444551d7c3c7de52f6513c9db926628796adb4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393136
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently SPDK_BDEV_MODULE_REGISTER() take many parameters. Extending it
(eg for incoming JSON configuration dump/load) is quite challenging and
error prone. As we are already here in next patches, rework this macro
to take one parameter - the pointer to struct spdk_bdev_module_if.
This patch also remove following macros:
SPDK_GET_BDEV_MODULE - this is not really needed, to find module outside
module translation unit use spdk_bdev_module_list_find()
SPDK_BDEV_MODULE_ASYNC_INIT and SPDK_BDEV_MODULE_ASYNC_FINI - replaced
by bool fields in spdk_bdev_module_if struct.
Change-Id: Ief88e023fbbaee7d5402c838dbecbdffd4dfb259
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/402883
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a generic way to get a UUID from a bdev.
For now, malloc and null bdevs generate random UUIDs, and no other bdev
types report a UUID.
Change-Id: Id9608c8c1b3ce3f1783e7f74bef96d44cd5d98a7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402177
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
A bdev that is claimed is not a leaf, even if it has no vbdevs exposed
currently.
Change-Id: I3b790068128890a569f83b15071ea916c54bff9b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402935
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds the QoS parameters on the bdev channel.
Change-Id: I0cb9bf9e9cdbbe61c70c4a3df4eeb8be774793a0
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/393129
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Unfortunatly not all bdevs produce its configuration in responce to
get_bdevs RPC call (eg nvme is producing tons of additional
informations). To not breake any existing scripts rename
'dump_config_json' to 'dump_info_json' instead of reworking those
callbacks. Next patches will introduce real 'dump_config_json' handlers
and API
Change-Id: If9c1a4ab864791b24a5f7d022e970cd65990ffc0
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/401216
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
With recent update to bdev.c for its io_device_register
handle for new bdevs, several modules can now just use
their respective structures defining each bdev rather
than picking a more complicated one.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic8ea24c64a782e54d18b6241e36f56dbbbb5f1e7
Reviewed-on: https://review.gerrithub.io/400555
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Many bdev modules create their own bdev structure
with spdk_bdev as the first member. bdev.c currently
uses the spdk_bdev pointer as its io_device handle,
forcing bdev modules to pick something different.
Change this to use the spdk_bdev pointer + 1 bytes
as its io_device handle. The actual handle does not
really matter - it just needs to be unique. This will
simplify bdev module development.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b6da3be9c16c87bc7a393c3a2221c6bae26e0a5
Reviewed-on: https://review.gerrithub.io/400554
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This avoids recursion in the case where the remove_cb
immediately closes its open descriptor, resulting in
a second call to spdk_bdev_unregister without unwinding
first.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I093786f13bb2953b8f08888a668a045581a9f81c
Reviewed-on: https://review.gerrithub.io/400305
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds two internal functions for the channel
create and destroy.
Change-Id: I3c5ca7a0633e5a5b3f95a36ed03f2b4cb4792e4f
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/395677
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the different cases to creat a bdev channel, added
a common cleanup function to destroy the resource.
The same function is also called at the bdev channel
destruction.
Change-Id: I81b60cab9df3a8975b0a9982482c9d27899d8a79
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/398351
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modified include/spdk/bdev.h and include/spdk_internal/bdev.h
add data members to capture statistics information. Modified
lib/bdev/bdev.c to calculate read/write latency.
Change-Id: Idcd55dd2e88c4b308e016f16ced53720256c79e3
Signed-off-by: Isaac Otsiabah <iotsiabah@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/390654
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add api and unit test functions for
change number of blocks for provided block device.
Change-Id: I55d67c99375cb88bdaa79ce1a36d4298223beddc
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Reviewed-on: https://review.gerrithub.io/390802
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_vbdev_unregister() is part of internal bdev API,
yet bdev module that uses spdk_vbdev_register() directly
will not be removed correctly when using delete_bdev RPC.
spdk_vbdev_unregister() is now consolidated with
spdk_bdev_unregister().
This comes up when deleting lvol bdev, as it does not use
spdk_bdev_part_* functions.
base_bdev->vbdevs entry was not removed for bdev that lvs
is created on.
Additionally patch expands test to create lvol bdev,
after removing it using delete_bdev RPC.
With ASAN enabled this would report accessing
already freed memory previously.
Change-Id: I9547e83862e2daa50355d56a1c9f453aaa6cfdb8
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/395711
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When there are two bdevs built on the same io_device,
it is possible that one bdev entirely saturates
underlying queue, not letting the second bdev issue
a single I/O. The second bdev will silently fail any
subsequent I/O and append it to the nomem_io list.
However, since we resend I/O only from I/O completion
callback and there's no outstanding I/O for that bdev
(io_outstanding==0), the I/O will never be resent.
It'll be stuck in nomem_io forever.
This patch makes nomem_io list to be shared between
bdevs built on the same device. It is now possible
that I/O completion callback from one bdev will retry
sending I/O from other bdev.
The shared bdev data is based on thread-local
bdev_mgmt_channel, so doesn't need any external
synchronization.
Change-Id: Ia5ac3a1627ce3de4087e43907c329aa7d07ed7c7
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/394658
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
This avoids having to dereference the spdk_bdev_io's
channel in the spdk_bdev_free_io() path.
Cleaning up after hotplug events should ensure that
all associated bdev_ios have been freed (not just
completed) before the bdev channels have been freed,
but this patch gives us some more wiggle room in this
area.
Results in a small (1-2%) performance degradation on
a bdevperf microbenchmark, but should result in no
noticeable difference on any real world workload.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8b88300fc53e8c0b83309a738a4c3bd2aeaff52
Reviewed-on: https://review.gerrithub.io/394399
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This is more efficient and buf_link users don't
need the extra flexibility that TAILQ provides.
link could also be changed to an STAILQ, but its usage
is not in the performance path so not touching that
as part of this commit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7df2cc24a3784add8370db859003783e92cbfc21
Reviewed-on: https://review.gerrithub.io/393834
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Most relevant fields get initialized after the structure
is returned to the caller, so this memset is just
wasting CPU cycles.
buf still needs to be set to NULL, so just set that
field explicitly.
bdevperf with null backend shows a 10% improvement
with this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I92ef0ea887f1307abdcd4b80bc08b45ccefe27d9
Reviewed-on: https://review.gerrithub.io/393714
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
bdev_ch->io_outstanding - NOMEM_THRESHOLD_COUNT
can be negative, so change the type, then
we can make the comparision correct.
Change-Id: I823ceb3dd053f71c1902ee66cf4caba719a7ae7d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/393437
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ic0cdcf088ebd5053f2e69ad2e607ee825d96fcb6
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/390202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added aliases list to bdev struct.
Added 2 API calls to add and remove aliases.
Added test for adding and removing aliases.
Change-Id: I1815aec8c02cfa398b2d1de41577197315665fdc
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-on: https://review.gerrithub.io/390200
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This mimics the per-lcore cache that the DPDK rte_mempool
implements. But DPDK rte_mempool relies on the DPDK
lcore_ids which are not set for non-DPDK threads (such as
the fio bdev plugin).
So implement our own per-thread bdev_io cache instead.
This is quite simple since we already have a per-thread
bdev channel called spdk_bdev_mgmt_channel.
Previously, we passed 64 to spdk_mempool for the
per-core cache size. This patch effectively changes it
to 256 and moves it from the spdk_mempool (which we now
specify with a per-core cache size of 0) to this internal
bdev cache. We allocate 64K of these bdev_io, so putting
a few more in each thread's cache will not hurt anything.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5e715f8c69b99130c7b80347b47a881595d184ae
Reviewed-on: https://review.gerrithub.io/392531
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Instead of requiring each bdev module to track its own bdevs and clean
them up during its fini callback, we can walk the list of registered bdevs
during spdk_bdev_finish() and call spdk_bdev_unregister() on each one of
them before cleaning up the bdev modules.
Change-Id: I01816707c9100f66f542bfd73b90bcb0e0fb0c0c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/389878
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Call this function from spdk_bdev_mgmt_channel_destroy().
Currently there are no real resources to free, but that
will change in an upcoming patch which adds per-thread
bdev_io caches.
While here, also add a for_each_channel iterator to
call this function on each existing channel during bdev
finish code path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9348e37053505c9fba7a6421e55ffc416668d24f
Reviewed-on: https://review.gerrithub.io/392530
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prepares for some upcoming changes which will
add a per-thread bdev_io cache.
While here, remove spdk_bdev_get_io() from the
internal bdev API. This function is not meant
to be called outside of bdev.c.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9f764a88a079fac936931c46d615999454013732
Reviewed-on: https://review.gerrithub.io/392529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
While iterating, allow the user to perform asynchronous
operations. To continue iteration, the user is expected
to call spdk_for_each_channel_continue.
Change-Id: Ifd7d03d5fbf17cf13843704274b036d49ca0484a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/391309
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Change-Id: I23f71ff38b805723d74aca639489e0079ecdb993
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/390341
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Disambiguate the log components from the trace functionality
(include/spdk/trace.h).
The internal spdk_trace_flag structure and related functions will be
renamed in a later commit - this is just a find and replace on
SPDK_TRACE_* and SPDK_LOG_REGISTER_TRACE_FLAG().
Change-Id: I617bd5a9fbe35ffb44ae6020b292658c094a0ad6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change the return type of spdk_bdev_register related
functions and try to handle the duplicated name
issue.
Change-Id: I23af11583cf2050579d1624508306a35394bffde
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/388178
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use the new one from io_channel.h.
Change-Id: I7bf6729caf6eeebcb58450a36119601957ad5da4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388290
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
It doesn't need to be accessed outside of bdev.c.
Change-Id: Ib1a1abe88b0993e391e0a39c5483781b2c0ad523
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/388508
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
spdk_bdev_nvme_io_passthru_md() is verified on QEMU NVMe
and will be verified on Cosmos mini OpenSSD.
Change-Id: Ib759b6b6095deaa4ae7cf746f3a241f678295605
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/387114
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change the return type of spdk_channel_msg from
void to int. If this msg executed in a failure,
we do not need continue sending the message to other
threads, we can just tell the original thread, and
let the orgiginal thread call the spdk_channel_for_each_cpl
call back.
Thus we can track the qpair creation/destroy case for bdev
reset in nvme bdev module;
Change-Id: Ide9dffd1f84a29fcf61d8339a9ece2a0245d968d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/387284
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The process of spdk_bdev_finish will always result in an
early call to the user's completion notification - prior
to the actual shutdown events happening.
Change-Id: Ib53393deb794b616d2b7ec94cb41502305bd99b7
Reviewed-on: https://review.gerrithub.io/386707
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
During tasting, if bdev is already claimed, we send errors on screen.
This is expected behavior so we should send only debug logs.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ic5766cfa3aed88099415991998381de69ee8b8b6
Reviewed-on: https://review.gerrithub.io/384229
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
First this change moves spdk_subsystem_fini() to trigger on
spdk_app_stop(). This ensures that spdk_subsystem_fini() is called
before reactors are stopped in spdk_reactors_stop().
Finish paths for subsystems, bdevs and copy engine is now
asynchronous.
Each of those three mentioned have to make sure they are
asynchronous as well.
Only bdev that currently has requirement for asynchronous finish
are logical volume.
Thus the change in vbdev_lvol.c making it move to next bdev module
only after all lvol stores were unloaded.
Fio_plugin finish of bdev and copy_engine was removed for now.
Next patch in series adds it back with async support.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I80ee2d084f3d82c50bf1329e08996604ae61b1b3
Reviewed-on: https://review.gerrithub.io/381536
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently deleting bdev does not support asynchronous delete
operations. Because of that results are returned before device
is actually deleted and some operation can be peformed on that
device after removal of this device started.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I305c302d8abd5d7c2c0f947fca70c58396872132
Reviewed-on: https://review.gerrithub.io/383732
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If an I/O fails during the write zeroes fallback to write on a split
I/O, the previous code would call spdk_bdev_io_complete() again on the
same I/O, causing infinite recursion.
Fix this by restoring the original user callback before completing the
I/O, as well as using _spdk_bdev_io_complete() rather than
spdk_bdev_io_complete() to avoid double-counting the statistics.
This also preserves the original bdev_io->status code set by the module,
rather than always setting it to SPDK_BDEV_IO_STATUS_FAILED.
Change-Id: Ib71fa6e54eed3d5823652971f7c439e0ff236fc1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/383506
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
if write_zeroes is not supported by the block device, we can get the
same behavior by simply writing a buffer full of zeroes to the blocks
we want to erase. I also incorporate splitting into the bdev layer to
accomodate large i/o.
Change-Id: I8fa1bfaaf22d7bfc6e3afb6e89d22fa9f7767e55
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/373829
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Always start bdev pollers on the calling core.
This removes the lcore concept from the bdev poller abstraction and
simplifies the job of spdk_bdev_initialize() callers providing their own
poller and event implementations.
All callers except the NVMe bdev hotplug poller already used the current
core as the parameter. The NVMe HotplugPollCore option was undocumented
and unused in any of the tests or example configuration files, so it
should be safe to remove.
Change-Id: I93b466e1e58901b8785c40cbe296fa46c157850f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382857
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Values from previous bdev_ios
were reused and were taken into
account e.g. in bdev_io_get_buf()
to check if a buffer is already
assigned.
Change-Id: I239aaf83a4ce8a9342c1820e3ac9e9ccf6a28336
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382959
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is required for virtio-initiator,
where multiple io_channels have to
share the same virtio queue. A single
poller will receive responses from
a virtio queue and send the completions
to the thread that submitted bdev_io.
Change-Id: I951c7655aaa17d41a680d437661afff27d2c3077
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382200
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
bdev_opened field in spdk_bdev structure is no longer required.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie4a368425b11b1c2e1a3a48b5858857b3935498b
Reviewed-on: https://review.gerrithub.io/381375
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is needed for proper IO channel allocation failure handling.
Change-Id: I795e5bcce5296a52c119d2300974b8cb3fc0d576
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/381187
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Closing the framework has to go through all subsystems
without failure, so return codes are unnecessary.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I53c9b4df12d2357e641130869f398b18637e6ff7
Reviewed-on: https://review.gerrithub.io/381681
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Also add a unit test that reproduces the original issue and passes
with the one line fix.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I120d42ba7b6cfa4a2cb11e6cc08885d95316fe81
Reviewed-on: https://review.gerrithub.io/380703
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This puts responsibility on the caller to free the buffer
and do any other cleanup associated with the partition base
(for example, GPT buffer).
While here, also clean up a bunch of places where on
various failures during initialization, it would just
free the buffer instead of calling spdk_bdev_part_base_free().
The latter is required to make sure the bdev descriptor
gets closed as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic000339459eca4a4a1d103da2e1f3feffe7e764f
Reviewed-on: https://review.gerrithub.io/378653
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
At very high queue depths, bdev modules may not have enough
internal resources to track all of the incoming I/O. For example,
we allocate a finite number of nvme_request objects per allocated
queue pair. Currently if these resources are exhausted, the
bdev module will return failure (with no indication why) which
gets propagated all the way back to the application.
So instead, add SPDK_BDEV_IO_STATUS_NOMEM to allow bdev modules
to indicate this type of failure. Also add handling for this
status type in the generic bdev layer, involving queuing these
I/O for later retry after other I/O on the failing channel have
completed.
This does place an expectation on the bdev module that these
internal resources are allocated per io_channel. Otherwise we
cannot guarantee forward progress solely on reception of
completions. For example, without this guarantee, a bdev
module could theoretically return ENOMEM even if there were
no I/O oustanding for that io_channel. nvme, aio, rbd,
virtio and null drivers comply with this expectation already.
malloc only complies though when not using copy offload.
This patch will fix malloc w/ copy engine to at least
return ENOMEM when no copy descriptors are available. If the
condition above occurs, I/O waiting for resources will get
failed as part of a subsequent reset which matches the
behavior it has today.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iea7cd51a611af8abe882794d0b2361fdbb74e84e
Reviewed-on: https://review.gerrithub.io/378853
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The same condition is already checked
in spdk_bdev_free_io().
Change-Id: I31f937036d3835e2d16633c6338ebca1a2237de9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379722
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also updated docs.
Change-Id: I2e53c31b2c9c575d8adea23ed92f113e69f324ed
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/380490
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is required for upcoming UNMAP
implementation in bdev_virtio.
While here, also added documentation for
spdk_bdev_io_get_buf().
Change-Id: Ia769ee9b8b132f31208ae66598b29a1c9ed37312
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379721
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch allows unmap bdev_io to
be used with spdk_bdev_io_get_buf.
bdev_io->iovs/iovcnt has been zeroed-out for other
I/O types to overwrite any previous values/pointers.
Change-Id: I570a4d82d9e4db6630a6831b1aab3259fb46cdd8
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377687
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic094c34f1dc9063f12df80d77b2c70ebae9a4977
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/380066
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I374910a7d5ecf0125228d0c99ab523804956ca78
Reviewed-on: https://review.gerrithub.io/378852
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch introduces per-channel flags to keep state of information
needed in the primary I/O path. Setting/clearing of these flags
should only done through an spdk_for_each_channel() call. Currently
there is only a RESET_IN_PROGRESS flag defined but more may be added
in the future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia81817e2dabc9997c12beebae72fb129cb5dcf9a
Reviewed-on: https://review.gerrithub.io/377828
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, we naively assumed that a completed
reset was the reset in progress, and would
unilaterally set reset_in_progres to false.
So change reset_in_progress to a bdev_io pointer
instead. If this is not NULL, a reset is not in
progress. Then when a reset completes, we only
set the reset_in_progress pointer to NULL if we
are completing the reset that is in progress.
We also were not aborting queued resets when
destroying a channel so that is fixed here too.
The added unit test covers both fixes above - it will
submit two resets on a different channels, then destroy
the second channel. This will abort the second reset
and check that the bdev still sees the first reset as in
progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61df677cfa272c589ca03cb81753f71b0807a182
Reviewed-on: https://review.gerrithub.io/378199
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Upper layers are not supposed to put an I/O channel if there
are still I/O outstanding. This should apply to resets as well.
To better detect this case, do not remove the reset from
the channel's queued_reset list until it is ready to be
submitted to the bdev module. This ensures:
1) We can detect if a channel is put with a reset outstanding.
2) We do not access freed memory, when the channel is destroyed
before the reset message can submit the reset I/O.
3) Abort the queued reset if a channel is destroyed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c03eee8b3642155c19c2996e25955baac22d406
Reviewed-on: https://review.gerrithub.io/378198
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This provides an alternate path for submitting
resets to a bdev module, in preparation for some
future patches where we will want to avoid
reset-specific checks in the main I/O submission
path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I833c01cc33940771b4265f963cfb9de61c5f1faf
Reviewed-on: https://review.gerrithub.io/378670
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We will use this typedef for some additional use
cases where are not specific to the need_buf
functionality.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8d18c7ac037ab4b0ba612f308b9ca38538d112b1
Reviewed-on: https://review.gerrithub.io/378197
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Since all direct bdev_io types have the same layout,
there is no need to keep them differentiated.
Change-Id: If8bb85e43c9922c0ebfc39837e3a45006e508b56
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377686
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This restriction causes bdevs examination/discovery to fail
when there are asynchronous operations. We should remove this
limitation for now. Future plan is to implement approach
similar to the one that is present in kernel.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibe5572297672022412d25a4a835dc9527ce97f3e
Reviewed-on: https://review.gerrithub.io/378758
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia96ae78ff9530d953181ac5f7255a38f3c8ec430
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Reviewed-on: https://review.gerrithub.io/375392
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently GPT keeps the bdev it is examining open, even after determining there is no GPT on it.
It is due to spdk_gpt_base_free() not notifying bdev layer to free base bdev_part.
Additionally release of bdev module for that bdev was moved to bdev_part_free,
as the module is not claimed until bdev_part on base bdev are created.
Functional tests added to verify the changes.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id75f88259267847e8ec476d19750dc1e2690f11a
Reviewed-on: https://review.gerrithub.io/378621
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reported-by: Cunyin Chang <cunyin.chang@intel.com>
Change-Id: I94ec3a5f43839f1fa4379d2f275c4e19f81e1a52
Reviewed-on: https://review.gerrithub.io/378003
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This moves towards the ability to queue ios while
a reset is in progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibb8efbcec3931f966eb43030ea91945dfaaa5a77
Reviewed-on: https://review.gerrithub.io/377827
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
First, improve packing of spdk_bdev_io. Move any
fields which must be zeroed into the first cacheline.
Also change type and status from enums (needing 4 bytes)
to int16_t which is still a far bigger range than
needed.
Next, modify spdk_bdev_get_io to only zero the
first cacheline (actually a bit less).
SPDK_BDEV_IO_TYPE_INVALID is also added, making it
explicit that 0 is an invalid value for the IO type.
Previously this was somewhat inferred.
There are still additional improvements that can
be made to this area - primarily combining
spdk_bdev_get_io() and spdk_bdev_io_init() into
a single function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1916d6d5db02c93622b9725ec1095148e3f384d8
Reviewed-on: https://review.gerrithub.io/377799
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_bdev_io_submit() always returns 0, so the return
value is unnecessary. This eliminates a slew of checks
on that return value.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I493ecefc7b72d3b3a44bd92df70bd5c653453ff0
Reviewed-on: https://review.gerrithub.io/377627
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We no longer support resubmitting an existing I/O to
a lower bdev. This enables accurate tracking of I/O
at each bdev layer for purposes of reset handling and
QoS.
__submit_request() in bdev.c is now only called
from spdk_bdev_io_submit(), so just collapse these
two functions together while we are here.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1b46df42b1a6476f9dbd8c61dd3380dbd145315d
Reviewed-on: https://review.gerrithub.io/377626
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
split, gpt and error all have a lot of similar code, and
are based on the presumption of one or more "partition" bdevs
on a "base" bdev. This results in quite a bit of duplicated
code between these three bdev modules. The error bdev
module does follow this same model - it just always has only
a one-to-one mapping between the error bdev and its base bdev.
As all of the modules move to allocating their own bdev_io
rather than allowing for adjusting an existing bdev_io and
resubmitting it, there will be even more duplicated code
between these modules.
So this patch adds a set of helper functions in the common
bdev library to eliminate all of this duplicated code.
This patch also moves the split module to use it - future
patches will also convert gpt and error.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8032331b46c32da9fca18a077580ccb274c6204
Reviewed-on: https://review.gerrithub.io/376423
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add new versions of all of the I/O calls that take parameters in blocks
instead of bytes. These are intended to replace the old APIs, but
we'll keep them for now to preserve compatibility.
Change-Id: I85ab665c653e8c697016c628837d49aa0c3bfcd0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376255
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
The bdev modules now take all read, write, unmap, and flush requests in
terms of blocks rather than bytes.
The public bdev APIs still accept offset and length in bytes for now.
Change-Id: I57f0955d52272f57755f0ff4dbc56721fdc2ef51
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376037
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
bdev_virtio requires us to do SCSI inquiry for
each device and wait for a response. It currently
polls inline for this response, taking up entire
reactor exclusively. Making it async would allow
other pollers to run while bdev_virtio still has
to wait.
Change-Id: Iefc88e0a2efb5b791ffe23b2e623b7c50d759084
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375573
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_bdev_init_complete could have been called twice.
While here, also simplify bdev_initialize error path.
On allocation failure, bdev subsystem will now finish
with bdev_mgr->module_init_complete set to false.
Fixes: 7fefd60fab ("bdev: make module init synchronous again")
Change-Id: Ia4b5d571d26beb34f0e6c0f4c7b3176215eec69f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/375572
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace SPDK_TRACE_DEBUG with component-specific flags.
Change-Id: Iee7eafab5e6ac8713f247323a18552b5afb0e86a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375834
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This matches the name to the behavior and prepares for addition of a new
log macro for "info" log level.
Change-Id: I94ccd49face4309d3368e399528776ab140748c4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375833
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes it consistent it with other parts of this structure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie36488813b53ce20663c50a5c9f049c4c9723d3a
Reviewed-on: https://review.gerrithub.io/375494
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
gencnt is no longer really used since there is no more
differentiation between "soft" and "hard" reset. The
original idea was that a hard reset would complete I/O
known to the bdev layer even if the underlying bdev
module had not actually completed it yet. We do not
actually support that concept, and it was a bit flawed
anyways.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa2c85bb474c7dd55eb7386d6cad5079f5edbccc
Reviewed-on: https://review.gerrithub.io/375484
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Allow passing the NVMe namespace optimal I/O boundary through the bdev
layer.
Change-Id: I27a2d5498df56775d3330e40c31bd7c23bbc77a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374532
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add functionality to the bdev layer to handle the nvme write_zeroes
function.
Change-Id: I0dadad273b28c16db5a2275f7d8d57e98253a8d3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372171
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I33506d6b9ff09c45c057326f7339d742eebc45b4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372861
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Swap the meaning of the return value to match the name of the function.
Change-Id: I89dc09e3b309a06586adf2ab750092f06077ffd9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/372859
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is far simpler, although it does limit the bdev
layer to unmapped just one range per command. In practice,
all of our code reports limits of just one range per command
anyway.
Change-Id: I99247ab349fe85b9925769e965833b06708d0d70
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370382
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev could be unregistered multiple times when all it's descriptors have
been instantly closed via it's remove_cb without any deferred
event/poller
Change-Id: I128716077b0512c6334bdd113220684f8cfcbecb
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370949
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Patch afe860ae deferred freeing the io_device. However, for nvme, the
io_device context (spdk_nvme_ctrlr) is still being destructed before
io_channels are destroyed, causing segfaults on hotremove.
This patch defers io_device context destruction and fixes nvme
hotremove.
Fixes: afe860aeb1 ("channel: Correctly defer unregisters if channels exist")
Fixes: 5533c3d208 ("util: defer put_io_channel")
Change-Id: I7af699174cac0c6c6a6faa2cc65418c47347eb9a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370459
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ie25a87c4b3f781299fa744fdcff6c9a63d473935
Signed-off-by: Roman <roman.sudarikov@intel.com>
Reviewed-on: https://review.gerrithub.io/365723
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Otherwise we'd fail sanity checks when closing the claiming descriptor.
Current approach works because we never close the claiming descriptor.
Fixes: 4fc7e66614 ("bdev: add vbdev claim/release semantics")
Change-Id: I1c1f0c11450e749419726df460334ab97b43b584
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/370179
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
When device has more than one open descriptor, remove_cbs of particular
descriptors could be called more than once.
Consider the following scenario:
bdev X with 2 open descriptors A and B.
X is removed (hotremoved for instance)
bdev_unregister(X) is called
* bdev->status = REMOVING
* A->remove_cb is called
* some poller is started
* B->remove_cb is called
* another poller started
* poller from A->remove_cb finishes it's work and closes the desc:
* bdev_close(A)
* A is removed from bdev->open_descs list
* bdev->status is REMOVING, so bdev_unregister(X) is called again!
* B->remove cb is called again!
* another poller starts? segfault?
Fixes: 57d174ff67 ("bdev: add spdk_bdev_open/close")
Change-Id: I0a898ec0aee521d0b2a1168fe7d469cc41a8ef4f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/369727
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This enables checking permissions - for example,
spdk_bdev_write will fail if the descriptor was not
created with write permissions.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I68b65a560f471f2e0f71a7f42cfa6689b911110f
Reviewed-on: https://review.gerrithub.io/369493
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We still will sort the bdev_module list so that modules
with an examine() callback are initialized first. This ensures
they have a chance to initialize before later modules start
registering physical block devices.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I792cfb41b0abe030fe2486a2c872cbf329735932
Reviewed-on: https://review.gerrithub.io/369486
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Module initializaiton was made asynchronous recently
to support bdev modules like gpt which need to do
asynchronous I/O. But all modules now do any
asynchronous I/O in their examine() routines, and
init functions only do very basic operations to be
ready to handle examine() callbacks.
So simplify the bdev code and modules to go back to
a synchronous init procedure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idb16156796ad7511d00f465d7a2db9acda6315b6
Reviewed-on: https://review.gerrithub.io/369485
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This includes file names, functions, #defines, etc.
There are still a few uses of "blockdev" outside of
include/ and lib/ - these can be handled later.
This preps for a future patch to consolidate vbdev
modules and bdev modules into just bdev modules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I70e575709ae1b0a116b08515fd38ae793de05377
Reviewed-on: https://review.gerrithub.io/369325
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
vbdev modules still open/close bdevs as normal, but
should open bdevs read only when tasting (i.e. reading
the GPT to see if there are SPDK partitions). When
a vbdev module is ready to claim the bdev for purposes
of creating virtual bdevs on top of it, it calls
spdk_vbdev_module_claim_bdev(). It can pass its
open descriptor as well to have it promoted to
write access (required for future vbdev modules like
logical volumes).
Note: error vbdev was changed to copy the base bdev
parameters one-by-one instead of a blind memcpy - we
do not want to copy the base bdev's vbdev_claim_module
into the new bdev!
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If2ee67dc78daf96050343c473671aa3402991bb1
Reviewed-on: https://review.gerrithub.io/368628
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows vbdev modules to be ready for examine
calls for (physical) bdev modules when the latter
initialize.
This requires the following modifications to existing
bdev modules:
1) error and split now search their config sections
at examine time (instead of init) to see if the
bdev should be consumed by the vbdev module
2) gpt is simplified considerably - it no longer
needs to save bdevs to examine when
gpt initializes later
3) nvme must register its io device before registering
the bdev, since vbdevs may immediately start trying
to send I/O to the new nvme bdev
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8fe5686092ffb15fc8bdbc068b09add229d9da6c
Reviewed-on: https://review.gerrithub.io/368598
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add additional fields to the g_bdev_mgr to enable
deferring spdk_bdev_init_complete when modules have
finished initialization, but vbdevs are still processing
examination callbacks due to asynchronous I/O.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I12dc7cb08e44e022b5bad75ba9a946571eb65957
Reviewed-on: https://review.gerrithub.io/368832
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a new spdk_vbdev_module_examine_done() API which
vbdev modules can use to notify the generic bdev layer
once a base bdev examination is complete.
This is especially required for asynchronous vbdevs
like GPT which must issue I/O to the base bdev.
As part of this patch, add examine callbacks
for both split and error, which for now only call
this new functions. Later patches will move code from
the init callback to the examine callback for these
modules. examine callbacks are now required for all
vbdev modules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I49f2d012d1675b878bcd23afff427c740c6502c7
Reviewed-on: https://review.gerrithub.io/368831
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This eliminates overloading of the term "register"
in the context of bdevs, as well as opens up the
idea of examining bdevs not just when they are
registered, but also after they are closed with
write access.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9e15f9dc0fa4e02214f188f987f9da2dbc8db1f7
Reviewed-on: https://review.gerrithub.io/369042
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic3051b63942770e45be22af0ae03a78a7c543f81
Reviewed-on: https://review.gerrithub.io/368597
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a name parameter to the MODULE_REGISTER macros, and then
modify each bdev module to pass a string for its name.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If878617ce3c3eacfcf5df44ed6f194f11c66f78f
Reviewed-on: https://review.gerrithub.io/368596
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Retire the old claim/unclaim semantics in favor of
open/close. Clients must now open a bdev to get
an spdk_bdev_desc, then pass this desc to get an
I/O channel.
This allows multiple clients to open a bdev,
although only one may open a bdev with write
access.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4d319f1278170124169a8a75fd791e926b3f7171
Reviewed-on: https://review.gerrithub.io/367611
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each virtual bdev now has a pointer to its base
bdev, and a base bdev has a pointers to any virtual
bdevs built on top of it.
Also add a new set of leaf iterators, to get only
bdevs that have no virtual bdevs built on top of
them. These iterators are now used by the bdevio and
bdevperf utilities, in advance of the claim/unclaim
semantics getting removed in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I669783764407cdd4920b5ee121959e2a58c8d436
Reviewed-on: https://review.gerrithub.io/367610
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Abstract these through the bdev API to break this
dependency on the event framework.
Change-Id: I108505bf27e94b2985f53d0a4dc0b847ae264d25
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/366340
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This breaks the dependency on the event subsystem logic.
Change-Id: Ic47a219bc1e272c3421b265f74bba959e1aa5f62
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365730
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Much like bdev modules inside the bdev directory,
add a subsystems directory inside of event. The subsystem
specific code for the bdev library is placed in to
a separate library in that directory, breaking the
strict dependency of the bdev library on the event subsystem
code.
Change-Id: I255941b823a9ec3e2d62f22a586414949d8ff5ad
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365055
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This also requires vbdev modules to call spdk_bdev_reset
explicitly on the base bdev, rather than just resubmitting
the original reset bdev_io.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie33d506f68506096306c9f0a9ff5e11141578b15
Reviewed-on: https://review.gerrithub.io/365712
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We can do all of the completion work first, and then
make the decision at the very end on whether to
defer the callback or not.
This also removes the bdev_io defer_callback member -
we no longer need it since we now only defer the
callback itself, instead of deferring the full
execution of the spdk_bdev_io_complete() routine.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3285e34d2fbce34d4254dca2119561ff825ee9e8
Reviewed-on: https://review.gerrithub.io/365711
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia45876fb6f0eefd987cdb36521ecb591ef1f9499
Reviewed-on: https://review.gerrithub.io/365669
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This ensures a reset is completed after any I/O completions
that may have been deferred.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9efe5c07435371ff8c8e0c826349e9349ade02f3
Reviewed-on: https://review.gerrithub.io/365663
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Switch from the SPDK event library event to the spdk/io_channel.h thread
message abstraction. This partially decouples the bdev layer from the
SPDK event library.
Change-Id: I2300b8d84c357d6d8cab0d370d7681e948fe97d0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/365077
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These commands should be treated as aborted by spec,
so correctly deliver abort notifications when a
qpair is deleted.
Change-Id: I8af47a3f42f5695ef8e1a70813662e69102720b2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364681
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There are several possible usages of this information -
the first will be related to starting a poller for a bdev
channel when there are I/O that need to be retried.
Usually we can retry an I/O when a previous I/O completes,
but if there are no outstanding I/O, we need to start a
poller. This count will help us make that decision.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifff7d99970510785a1cf30d20b86b3974ce8a106
Reviewed-on: https://review.gerrithub.io/362235
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It is not actually useful to be immediately returned
a handle to the bdev_io. There isn't anything valid
that the user can do with it at that point. Instead,
return an integer error code.
Change-Id: Iffa9a8dc5b2eefab57e3cc1f68919985431d17d1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364137
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ica7f76a5354b27e6e5fd7114de1fdba46434b073
Signed-off-by: Roman Sudarikov <roman.sudarikov@intel.com>
Reviewed-on: https://review.gerrithub.io/362994
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I4d281be99553629563026cc4f9ab890d0a97986c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/364115
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Dynamically allocate bdev names to remove the arbitrary 16-character
name length limit.
All of the existing product_names are constant strings, so those can
just use string literals instead of a copy per bdev.
Change-Id: I3280da67a4fcf2e4ec8ee8193362ca1b96a9c0cb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363601
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Support passthru for NVMe admin commands.
Change-Id: If926f2ecabb078a553158f544c10a92452dbdb39
Signed-off-by: Edward Yang <eyang@us.fujitsu.com>
Reviewed-on: https://review.gerrithub.io/363294
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I05bb8294471bac3f9ecc4744e28d7d40e57e5364
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362622
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Instead of an array of queues per core, allocate
the queues per management channel.
Change-Id: I4ace5bd13362a549a45aba62e978dabbbe1a333d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362617
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: John Meneghini <johnm@netapp.com>
Reset requests will now pass messages to all channels,
correctly abort all queued I/O, wait for that to complete,
and then pass the reset request down to the next lower
layer in the stack.
Change-Id: I167cc5f424d3d0fc52b041bda63ee176f6acea29
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362616
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is now just one type of reset, which is equivalent
to a HARD reset previously.
Change-Id: I955b219cbc5c25793d97de1cc003b30ae99313ac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362615
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I93684a004e2ae276734edbb4767b5ba1bac3dd48
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/362111
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The next patch will make bdev modules init
in the async manner.
Change-Id: I4909c80510d786daf54003b99a5925428cf37373
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/362110
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows virtual blockdevs to inspect newly-added bdevs and
potentially insert themselves automatically.
Change-Id: If567a950d753e5f08861a5de22a2e1350376e50f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/362077
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I03d042cbb6de08f7e07b8c0ccc8af44d7b16ae3b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362614
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently this is just a placeholder, but eventually
it will be used to replace the per-core queues.
Change-Id: Iefeb90711bcf001a383e36cd4eaadf813af66506
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362613
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This wasn't used anywhere and we currently believe there
are superior software-only techniques for controlling
quality of service.
Change-Id: Icdadd5870ed0629b338c307d2619bbc242c3e7a3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362065
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This ensures that all spdk_bdev_io structures now have
an attached channel, simplifying some future work around
things like counting the number of outstanding IOs for
a given channel (which otherwise would have had to
account specially for resets).
Reset semantics are still that they affect the entire bdev
and not just the channel it was submitted on.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8aad21a88faacecfd94bdba350059528eb62c390
Reviewed-on: https://review.gerrithub.io/362251
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The user should not see the bdev_io status directly; the NVMe and SCSI
error code wrappers provide the ability to translate to the desired
format regardless of what kind of error is stored inside the bdev_io.
Replace the spdk_bdev_io_completion_cb status parameter with a bool
simply indiciating whether the I/O completed successfully.
Change-Id: Iad18c2dac4374112c41b7a656154ed3ae1a68569
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/362047
Tested-by: <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is no longer used anywhere. For the places where we previously
used it, we've since found alternate solutions that do not
require it.
Change-Id: I738a80b95ef50348ce1c14969a3812b0a625b3fd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362064
Tested-by: <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was implemented as two functions, but it
is much simpler as one. Also, the public function
was way at the bottom of the file instead of near
spdk_bdev_put_io_buf.
Change-Id: I3a90688910b0542cc77b6333bab15132cf514eeb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This was implemented as 3 separate functions but
it is simpler as 1.
Also, this wasn't previously freeing the buffer pools.
Change-Id: Ic1b2b3a0596e745a223099cb2a79bea6ef5c69cc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This was broken into three functions, but it is
a lot simpler as one.
Change-Id: If58ad50fe7d4f65c598b62f24e9e1ce7a64fdd8e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This is better organizationally, but also will serve as
an io_device in the future.
Change-Id: I6d65cf39df59e874d13f5fccc5a489720e86c48f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Return types should be on a separate line for definitions.
Change-Id: Iaa38dd00042359fc6640fc67053bd69ebbb7af03
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Make the buffer allocation work for all types of
commands, not just read.
Change-Id: I72d8f67a724566630e7c4a74759fcb08449f7de4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
We plan to use these buffers for more than just reads.
Change-Id: I8fa6cb432a6cfe4406fbf240cd3aa2ae4ab5f3d5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The user can get there via the bdev, so this didn't
have a purpose.
Change-Id: I7f85bb71d5ee238d37ba3624d0ac68a161c95e49
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The SCSI task bdev I/O should never be pending when spdk_scsi_task_put()
is called, and just setting the status to failed is not correct (when
the bdev eventually completes the I/O, it will write into the now-freed
bdev_io, which may be reused by someone else).
Change-Id: Iaad6ce9ab41539652abc40147fed47c5012109dc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
In the pattern set by spdk_bdev_io_complete_nvme_status(), allow
blockdev modules to complete a bdev_io with a SCSI status code.
Also move it to the internal bdev header file, since only bdev modules
should be setting bdev_io status codes.
Change-Id: I8b6afad2c02d7c010c5e60f06a7c7e0785eb87ca
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the scsi_nvme translation code from the SCSI library into bdev, and
provide a generic way to translate any bdev_io status into a SCSI
status.
Change-Id: Ib61a6209387c24543e31574e2b5ca249e2ac8b74
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These channels can handle generic bdev context.
Change-Id: I61f41884ddf4cf86fa156e9051421b354bbb349d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Some calls were passing bdev->ctxt, some calls just
bdev. In most of our implementations those are the
same pointer, but they aren't necessarily.
Change-Id: If2d19f9eef059aded10a917ffb270c1dc4a8dc41
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This virtual block device takes an underlying block device and splits it
into several smaller equal-sized block devices.
Change-Id: I6f6e686c1177b2e4885f7e88809ad329caae55bd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prevents the need for bdev users and modules to manipulate the
internal bdev_io error.nvme fields.
For now, all non-NVMe error types are treated as a generic device error,
but translation from SCSI to NVMe could be added in the future.
Change-Id: I4e831b26a2f41bf2f405c7576d5019bb898d4d1b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If a blockdev module calls spdk_bdev_io_complete() within its
submit_request function, and the user's completion callback issues a new
I/O, it is possible to cause infinite recursion, consuming all available
stack space.
To avoid this, track whether a bdev_io is being processed by
submit_request, and if io_complete() is called in this case, defer the
completion via an event.
Change-Id: I6ccdb8ed4ee0d5738e6c9840d35431de52bd5fa2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Because of the addition of io_channel support to the bdev layer, there
is no longer a need to re-run a completed I/O through the submission
event pipeline; it can be freed directly.
Change-Id: I2b9163c87293345acf0e85f6d0c1032f30209659
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Claim the block devices used by iSCSI LUNs and NVMe-oF subsystems so
they can't accidentally be reused.
This will also be used by virtual block devices to allow layering of
bdevs.
Change-Id: I5384923fbf24f13f4ce720a797c5a628053d49f4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use a plain function pointer + callback context for the bdev I/O
completion callback. This is possible now because each I/O channel will
be polled on the core that submitted the I/O.
Change-Id: I29ee8e4a3430df11c74845adab840395b9bc5010
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The 'next' event pointer was never used in the entire code base (always
NULL).
Change-Id: I75f999d3a2e10512d86edec1a5a46ef263e2635b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use 'struct spdk_event *' directly for consistency with the rest of the
API.
Change-Id: Ib41a9bf47f5b18f4aebf5f4dee055455cb12ef7d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It is only used within bdev.c and can be static.
Change-Id: Id6e2cd9e5dd61a3ef1e1a27993d7a5ea7728bff2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is consistent with the other internal-only API headers.
Change-Id: I2c4748977d38a6c173311d26197d6273c168da7d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SPDK_TRACELOG macro depends on a CONFIG setting (DEBUG), so it
should not be part of the public API.
Create a new include/spdk_internal directory for headers that should
only be used within SPDK, not exported for public use.
Change-Id: I39b90ce57da3270e735ba32210c4b3a3468c460b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Remove a DPDK dependency from generic code.
Change-Id: I8e3e2c0a36d980b426a1967ed1f88fb8b855c382
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Custom bdev modules can return any SCSI status and SCSI sense
information to a host by this patch. This is usefull when a custome bdev
module detect an error in the module and need to return meaningful
information to a host.
A status member of spdk_bdev_io structure is set after the if block.
Therefore a status parameter should be checked instead of a status
member.
Change-Id: I4030a7fcdb36d9c589802ec5b4e424591dc2a3b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Four read/write functions share the same code for checking
IO len and offset. Extract this code into separate function.
Change-Id: I40f0021e70a60c591b048ad3a70b22eaa07af3b4
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This patch enables vector operation for bdev drivers aio, malloc and
nvme.
The rbd driver still handle only one vector.
Change-Id: Ie2c1f6853bfd54ebd8039df9a0305854ca3297b9
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Remove #includes for all DPDK headers that weren't
necessary.
Change-Id: Ib02522e0f04e64a1c98afceb7508cc0e8d931a9d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Use the env library to perform all memory allocations
that previously called DPDK directly.
Change-Id: I6d33e85bde99796e0c85277d6d4880521c34f10d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This patch enables vector operation for bdev drivers aio, malloc and
nvme.
The rbd driver still handle only one vector.
Change-Id: I5f401527c2717011ecc21116363bbb722e804112
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Validate the number of unmap descriptors in the generic bdev layer
before calling the blockdev-specific unmap function.
Change-Id: Ib24e7ec63f782f23f2ee3e63393aa8463123fdb4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
We already require the assert header from the C standard library,
so use that instead of RTE_VERIFY to further isolate DPDK
dependencies.
Change-Id: I4a718af858c88aff6080e33e6c3dd533c077b8f4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
bdev and copy modules no longer have check_io functions
now - all polling is done via pollers registered when
I/O channels are created.
Other default resources are also removed - for example,
a qpair is no longer allocated and assigned per bdev
exposed by the nvme driver - the qpairs are only allocated
via I/O channels. Similar principle also applies to the
aio driver.
ioat channels are no longer allocated and assigned to
lcores - they are dynamically allocated and assigned
to I/O channels when needed. If no ioat channel is
available for an I/O channel, the copy engine framework
will revert to using memcpy/memset instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99435a75fe792a2b91ab08f25962dfd407d6402f
Also implement these functions for all of the bdev drivers in
the tree.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idea97743d601150044b1fe2d9d76e922d46d3ee1
This matches the general order (LBA start then LBA count) for
the NVMe API.
While here, fix a copy/paste error in a debug message (write
instead of writev).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ice326af5d6025867dffed4d1f6c7b81fb9eba5eb
If a bdev doesn't need to be polled, allow it to specify NULL for the
check_io function pointer to indicate that no poller needs to be
registered.
This will be useful for virtual blockdevs that don't have any associated
hardware to poll.
Change-Id: I0ef8f848587b0c200296805ccc710340dde683b5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When an I/O with children is being freed, also free its child I/O
requests that were allocated via spdk_bdev_get_child_io().
Change-Id: I2d44aed845c1035ae8f8cb07c5992da855f1dc99
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This callback was only used for freeing buffers, but the buffers are now
managed by the bdev core, so none of the free_request callbacks actually
do anything.
Change-Id: Icfe2e6169e829159dda5e3d75a27d8f040de07c6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Bdev modules need a separate interface than public
consumers of the blockdevs.
Change-Id: I581ee493570c114f7e96b31a425bc077a791c71e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Some block devices do not support the unmap operation, and we may add
other optional I/O types in the future. Add a method to check which I/O
types a specific block device supports.
Change-Id: I6e6414bf6b6482ea0224022d8326b252bd363c7f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This leaves more flexibility for future changes to the poller
representation without requiring API changes (after this one).
It also prevents the user from accidentally using poller fields in a
non-thread-safe way, since they can't be accessed directly anymore.
Change-Id: I7677d5b93668665d29ae39c5e0ba74333ad3f878
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Allow pollers to be scheduled to be run periodically every N
microseconds instead of every iteration of the reactor loop.
Change-Id: Iaea3e98965d81044e6dc5ce5f406bcb7a455289e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Just getting a reference to a bdev should not claim it.
Change-Id: I21e07160662490ec95b52fa31ea1d2ae93a21f09
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Combine the necessary functionality with the main bdev file.
Change-Id: I96d796bc87ac2a8688cdf1fd3c16d2a7c8aef730
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
