Add max/min_read/write/unmap_latency_ticks into the struct
spdk_bdev_io_stat.
When initializing or resetting the instance of the struct
spdk_bdev_io_stat, initialize max to 0 and min to UINT64_MAX.
Then update max if a new value is larger than the current max,
and update min if a new value is smaller than the current min.
For the bdev_get_iostat RPC, it prints max and prints min if min is not
UINT64_MAX or 0 if min is UINT64_MAX.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I1b30b3825c15e37e9f0cf20104b866186de788a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14825
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Add a helper function bdev_reset_device_stat() to reset I/O statistics.
This funciton is used for the bdev_reset_iostat RPC.
We do not have any plan to use bdev_reset_device_stat() outside
lib/bdev. Hence, we do not add this as a public API.
Then, add a new RPC bdev_reset_iostat to reset I/O statistics of a
single bdev or all bdevs.
Resetting I/O statistics affects all consumers. Add a note to CHANGELOG
and doc/jsonrpc.md.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I97af09107b5c3ad1f9c19bf3cbf027457c4fbae7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15350
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Hold not only io_stat pointer but also num_blocks and blocklen in local
variables.
This will shorten and simplify bdev_io_update_io_stat(), and improve
readability and changeability.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I527b72538a169a1faafd32863ff539306a8763a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15732
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The following patches will add max/min latencies and more optional
counters. This factorization will improve the readability.
In addition to factorization, add spdk_likely to check if completed
successfully or not.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I57581ece2b73d486aa138f8d26a5afaf6953a322
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15480
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For consistency, rename a JSON dump function by bdev_io_stat_dump_json()
and change the parameter order.
Other public APIs and function pointers in the generic bdev layer,
spdk_bdev_dump_info_json(), spdk_bdev_fn_table::dump_info_json, and
spdk_bdev_fn_table::write_config_json have a json_write_ctx pointer
as the last parameter. For consistency, swap a statistics pointer and
a json_write_ctx pointer.
This is another preparation to extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I6f3bb6f2752f7da856d4fe66c0f1f8a2eedc176b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15731
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Move a JSON dump functionbdev_get_iostat_dump() for I/O statistics
into lib/bdev/bdev.c.
The next patch will rename the function and change the parameter order.
This is another preparation to extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I6a90d15fcbaa2e2a250167754135623bc9e7f362
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14837
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Add helper functions, bdev_io_stat_alloc(), bdev_io_stat_free(),
and bdev_io_stat_get() for struct spdk_bdev_io_stat.
Then replace a bdev_io_stat_add() call by bdev_io_stat_get() at
spdk_bdev_get_device_stat() because the saved data is queried first.
This is another preparation to extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9547757421a1de1b8cb44e0f8ade4b5c2bcad4e6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15443
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The following patches will extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
In this case, the size of the struct spdk_bdev_iostat will be variable.
As a preparation, allocate spdk_bdev_io_stat dynamically.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I1979a9d867859d5cb5d05717bfcc677f07fa03f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
The following patches will extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
In this case, the size of the struct spdk_bdev_iostat will be variable.
As a preparation, allocate spdk_bdev_io_stat dynamically.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I50b57f792b451cf748ea8eb0611fe65d693d5a14
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15478
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
The following patches will extend I/O statistics to include error
counters and module specific counters to output these via the
bdev_get_iostat RPC.
In this case, the size of the struct spdk_bdev_iostat will be variable.
As a preparation, allocate spdk_bdev_io_stat dynamically. For the
per_channel mode, we can share the bdev_ctx->stat because
spdk_bdev_get_io_stat() always overwrites stat.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I51cd550f52dc3b7d0f3f825fd48bcbeb3ecdcff2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When use of deprecated featues is encountered, SPDK now calls
SPDK_LOG_DEPRECATED(). This logs the use of deprecated functionality in
a consistent way, making it easy to add further instrumentation to catch
code paths that trigger deprecated behavior.
Change-Id: Idfd33ade171307e5e8235a7aa0d969dc5d93e33d
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15689
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
the mobj is allocating from pdu_data_out_pool,
if pdu_data_out_pool is exhausted, when the pdu is
polled next time, because data_buf_len is modified,
iscsi_pdu_payload_read return -1, and the connection
will be released.
Signed-off-by: lizengwu <786436671@qq.com>
Change-Id: I3ee65472f7ddaa357d7952a5b734540f0bc0b216
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15626
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously we use this flag to avoid to call `vhost_dev_unregister`
twice in `subsystem_fini`, but DPDK vhost library will check it,
we don't need this flag actually, but there is one race condition
between adding a new connection and unregistering the socket file
in different threads, so here we just move it to vhost-user device
as the first patch, and then use this flag in coming patch.
Change-Id: I658712dd20331a2e2eb5f4758bf76f748036a131
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15482
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
`vhost_user_dev_unregister` will check if the device is busy,
so we don't need to check `user_dev->pending_async_op_num` here.
For `vdev->registered`, with this check here, we can remove a
device even it didn't have a valid QEMU connection, and since
vhost-scsi supports hotplug feature, we don't need to check this
flag either when it have a valid QEMU connection.
Change-Id: I50cdeb5ca544e2ed93a1bc99ec3da8787a9e5df5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15481
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Feng Li <lifeng1519@gmail.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Replace comments saying that particular locks must be held with
assertions that enforce that those locks are held. Remove the comments
so that there is no chance of comments and code getting out of sync in
the future.
This also fixes a caller of bdev_close() that did not hold a required
lock.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I3a540f1ad9b9826f925c523986334aa8fcd302f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This exercises the parts of spdk_spin_*() that are difficult to test in
unit tests. In particular, it tests multiple SPDK threads running on
different pthreads contending for a lock and it tests pollers and
messages going off CPU with a lock held.
Change-Id: I5cd6ce29c92c44ba63f47332fe339e59eed81553
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This introduces an enhanced spinlock that adds safeguards compared to
the default pthread_spinlock_t. In particular:
- A pthread_spinlock_t is still used, but additional error checking is
performed to ensure there is no undefined behavior on relock,
unlocking when not the owner, or destoying a locked lock.
- The SPDK concurrency model allows an SPDK thread to be migrated
between pthreads. Releasing a pthread spinlock on a different thread
from where it is taken is undefined behavior. If an SPDK spinlock is
held at a time that a time when a poller or message returns control to
thread_poll(), the program will abort.
- SPDK spinlocks can only be obtained from an SPDK thread.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I6dd6493ab5f5532ae69e20654546405a507eb594
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
nvme_tcp_read_pdu in a loop
nvme_tcp_read_pdu itself has a loop in it that runs until no more data
is available, so the extra loop does nothing.
Change-Id: I1471018e396c43187d1f06bd18ce8a6846a71c94
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15139
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is unsafe, because we touch need_buf_* queues, which aren't
thread-safe. Also, documented this requirement in
spdk_bdev_io_get_buf()'s description.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iabc141e051c543fdd51f079ae212f69e980d8148
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15668
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Add rpc method trace_get_info to show name of shared memory file,
list of the available trace point groups and mask of the available trace points for each group.
Fixes#2747
Signed-off-by: Xinrui Mao <xinrui.mao@intel.com>
Change-Id: I2098283bed454dc46644fd2ca1b9568ab2aea81b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15426
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
All the other spdk_sock_* functions return -1 and set errno
appropriately, so we should do the same in flush().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I51cda2c51974c72e82531f06fa31ab89b2329c91
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15642
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
If a lot of qpairs are connected all at once, the
RDMA optimal_poll_group logic does not work correctly,
because it only accounts for qpairs that received
their CONNECT capsule. Now that we have a counter
for a poll group's unassociated qpairs, use that value
to supplement the current io qpair count.
We can just assume for now that all of these unassociated
qpairs are io qpairs. That won't always be true, but
for purposes of picking the optimal poll group it is
sufficient.
Note that for RDMA, we could increment the counters
based on the RDMA qpair ID in the private data in the
rdmacm connect, but to keep the code simpler and common
across all transports, we defer the accounting until
after receiving the CONNECT command, so that it is
the same for all transports.
Fixes issue #2800.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5897d6ebac23d3b78b100e3fef5a7f9fb5304820
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15695
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use a local variable to hold the qpair count.
While here, also use pg_current to get the min_value,
this is a bit simpler to read than things like
(*pg)->group.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I65771fb469f021e9e77b8a6c117841b8f4b66af5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15694
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
We make decisions on how to pick a poll group for a new
qpair by looking at each poll group's current_io_qpairs
count. But this count isn't always accurate since it
doesn't get updated until after the CONNECT has
been received.
This means that if we accept a bunch of connections
all at once, they may all get assigned the same poll
group, because the target poll groups counter doesn't
get immediately incremented.
So add a new counter, current_unassociated_qpairs,
to account for these qpairs. We protect this counter
with a lock, since the accept thread will increment
the counter, and the poll group thread will
decrement it when the qpair receives the CONNECT
allowing us to associated with a subsystem/controller..
If the qpair gets destroyed before the CONNECT is
received, we can use the qpair->connect_received
flag to decrement current_unassociated_qpairs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8bba8da2abfe225b3b9f981cd71b6f49e2b87391
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15693
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Currently we use qpair->ctrlr at qpair destroy
time to decide if we need to decrement the
qpair's poll group's qpair count. But this is
not correct - these counters get incremented
when the CONNECT is received, but qpair->ctrlr
doesn't get set until later.
So add a new connect_received bool to the spdk_nvmf_qpair.
Use this instead to determine when we should decrement
the poll group qpair counters.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I174a0fda36c4558171953bf58f2f5117bc074f76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
At least recent Linux guest VMs send SPDK_NVME_IDENTIFY_CTRLR_IOCS as a
matter of course. While this isn't supported in lib/nvmf, as this
doesn't represent an error, reduce the log level of the error message so
we don't spam the logs.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I095de3e4331b3912cbc457da6d722b9883ec7884
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Issue is found in the virtio_pci_scsi_dev_create() whose
error path is setting the vdev->ctx to NULL before the
destruct operation.
Change-Id: I4ab0fbe300f7413ad4503833088856aa3f4c0734
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15676
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Optimal I/O boundary causes I/O to be split in the nvme driver. This is
a problem for writes if write_unit_size > 1 because the split I/O may
not match the write_unit_size.
Fixes: #2791
Change-Id: I437e6cb6d8e2415658d5b46539feeacb5363fd46
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
NVMf target reports copy command support if all bdevs in the subsystem
support copy IO type. Maximum copy size is reported for each namespace
independently in namespace identify data. For now we support just one
source range.
Note, that command support in the controller is initialized once on
controller create. If another namespace which doesn't support copy
command is added to the subsystem later, it will not be reflected in
the controller data structure and will not be communicated to the
initiator. Attempt to execute copy command on such namespace will
fail. This issue is not specific to copy command and applies also to
write zeroes and unmap (dataset management) commands.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I5f06564eb43d66d2852bf7eeda8b17830c53c9bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14350
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The correct SPDK thread is already contained in the poll group.
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Change-Id: I4eefe2ba60c77c01a866a693bccbb8affc8262ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes#2781
This patch fixes two issue causing segfault on r2t:
1. pdu buffer is allocated from immediate_data_pool, but data_buf_len is set as data_out_pool
2. task->desired_data_transfer_length is rewrite by iscsi_send_r2t, which causes a wrong calculated pdu->data_buf_len
Signed-off-by: melon.masou <melon.masou@outlook.com>
Change-Id: I151859afff7104f29ad7f0ec57a8479d88b742bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15542
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added new API 'spdk_bdev_histogram_get_channel' to get histogram of
a specified channel for a bdev. A callback function is passed to it
to process the histogram.
Change-Id: If5d56cbb5fe6c39cda7882f887dcc9c6afa769ac
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Print out the specific values in this SPDK_ERRLOG,
this can help to find where the error is.
Change-Id: I2a38aa2d4270e0bbf554ddb348a73d40967d1b16
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
If the calloc failed, the fd was left in the fd_group.
Change-Id: Ie68426a13d342756c20315656f0309440fda6e02
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15475
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: John Levon <levon@movementarian.org>
SPDK threads generally run on dedicated cores and locks should be rarely
contended. Thus, putting a thread to sleep while waiting on a mutex does
not free up CPU cycles for other pthreads or processes. Even when
running in interrupt mode, lock contention should be low enough that
spinlocks are a net win by avoiding context switches.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I6e2e78b2835bbadb56bbec34918d998d75280dfd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also add unit tests that explicitly test this
condition. They fail without the nvme driver changes
in this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa369be341eb4eba394f248990e56dce001d3940
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15579
Reviewed-by: Mariusz Barczak <mariusz.barczak@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For now, just print a loud warning when this case is
violated. We will add a hard assertion and cause the app
to exit with error status in a later release.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic9226f76a4729820f13a2728bea977b6a54f48ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15513
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This function can be useful to query if a thread
had spdk_thread_exit() called on it yet. Internally
we have both EXITING and EXITED state - so
!spdk_thread_is_running() can be used to detect a
thread that is in either of those states.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2f6fb024a6b1bc895fdc5132c722abc10f5d30f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15512
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This was an accidental remnant from the original
check-in, when we did not have a clear differentiation
between the event and thread libraries.
The rocksdb plugin code will send events to an
lcore - not an SPDK thread. But originally the two
were combined though an API called spdk_allocate_thread.
Once the differentiation was clearly made, we moved to
using spdk_event_allocate() to send events to a specific
lcore, but never removed the spdk_thread.
So now let's just remove the spdk_thread_create since
it is not needed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5c6a3c304b7b4183eee90038367fdea7ebd7280f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15504
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This requires creating and setting SPDK threads in the
subsystem unit tests as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I31acfb1d7e418f011acc9b48933032d8bf8a1c53
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Currently when a vhost-scsi controller is removed, it
calls spdk_vhost_scsi_dev_remove_tgt on all remaining
targets, and then immediately calls vhost_dev_unregister.
But this path goes into vhost_user_dev_unregister which
immediately returns with error if there are any pending
async operations - and there are since scsi_dev_remove_tgt
is asynchronous.
So instead add the vhost_dev_unregister call to
remove_scsi_tgt, so that the unregister only happens
after the last ref goes away.
This requires changing vhost_fini() to no longer
assume that spdk_vhost_dev_remove() will immediately
unregister the device, since it now happens
asynchronously. Previously vhost_fini() was making
this assumption erroneously - it would call g_fini_cb
without actually checking that the devices had been
unregistered. Because of that incorrect assumption,
we need to do both the vhost and vhost-scsi changes
in the same patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9577901266975447f9acfe53475221113f02fea3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15510
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
At end of spdk_thread_poll(), if thread is in EXITING state,
we call thread_exit() to see if the thread can move to
EXITED state. If there are any pollers, io_channels
or pending device unregistrations in progress, thread_exit()
will keep the thread in EXITING mode for this iteration.
But a thread may post messages to itself during this cleanup
process, so thread_exit() should also check if there are
any messages on its queue.
Found during testing of spdk_thread lifetime patch set.
rbd bdev module will send messages to itself like this
during cleanup. Without this change, rbd module testing
with bdevperf would cause an spdk_thread to move to
EXITED state prematurely.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie611026a67b7fa48640ae83be03e29a9c64883a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15533
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
