Feature negotiation is done after SET_FEATURES message, here we
move it in this message context, so that we can use the negotiated
features before starting the device.
Change-Id: Ic6388dbcebd72bc5ef182e65798d34c07f6fc35c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14924
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Before starting a device, the memory table is already
there, so we can check it earlier.
Change-Id: I4996705501577cfa78c89621f7081eb0c3d4dd78
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14923
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If during a channel creation, an error happens, due to incorrect parameters
e.g. wrong pool / container name, or some other internal DAOS errors (like
reaching CART context limit), bdev_daos_io_channel_create_cb() signals
about such errors, however, spdk_io_device_register() does not takes them into account.
The device creation succeeds, returning successful RPC response and leaving bdev
in the bdev lists but it's completely unusable and not amendable.
This patch tries to detect it early and return an RPC error on failure.
Signed-off-by: Denis Barakhtanov <denis.barahtanov@croit.io>
Change-Id: I04758e6243566b4e619a1420aa7c01f6041441a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15168
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
DPDK has merged changes which hide remove some DPDK
object such as rte_device and rte_driver from the
public API.
So we add copies of the necessary header files into
our tree, along with a 22.11-specific pci_dpdk
implementation.
These files are copied over exactly, except for one
#include which needs to change from <> to "" so that
it picks up the header in our tree instead of looking
for it in system headers.
Longer-term we may want to look at ways to automated
checking and updating of these header files. DPDK 22.11
isn't officially released yet, so the header files could
change, but we want to get this in now since without
it SPDK cannot build against DPDK tip at all.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I89ffd0abab52c404cfff911c1c9b0cd9e889241d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14570
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Copy operation is defined by source and destination LBAs and LBA count
to copy. For destiantion LBA and LBA count we reuse exiting fields
`offset_blocks` and `num_blocks` in `struct spdk_bdev_io`. For source
LBA new field `src_offset_blocks` was added.
`spdk_bdev_get_max_copy()` function can be used to retrieve maximum
possible unsplit copy size. Zero values means unlimited. It is allowed
to submit larger copy size but it will be split into several bdev IOs.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I2ad56294b6c062595c026ffcf9b435f0100d3d7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
Add a new parameter "-c" to display the per channel IO statistics
for required Bdev
./scripts/rpc.py bdev_get_iostat -b Malloc0 -h
usage: rpc.py [options] bdev_get_iostat [-h] [-b NAME] [-c]
optional arguments:
-h, --help show this help message and exit
-b NAME, --name NAME Name of the Blockdev. Example: Nvme0n1
-c, --per-channel Display per channel IO stats for specified device
This could give more intuitive information on each channel's processing
of the IOs with the associated thread on the same Bdev.
Please also be aware that the IO statistics are collected from SPDK
thread's related channel's information. So that it is more relating
to the SPDK thread. And in the dynamic scheduling case, different
SPDK thread could be running on the same Core.
In this case, any seperate channel's IO statistics are returned to
the RPC call and if needed, further parse of the data is needed to
get the per Core information although usually there is one thread
per Core.
On the other hand, user could run the framework_get_reactors RPC
method to get the relationship of the thread and CPU Cores so as
to get the precise information of IO runnings on each thread and
each Core for the same Bdev.
Change-Id: I39d6a2c9faa868e3c1d7fd0fb6e7c020df982585
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13011
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
And also related function pointers and APIs:
spdk_bdev_for_each_channel_msg;
spdk_bdev_for_each_channel_done;
spdk_bdev_for_each_channel_continue;
Change-Id: I52f0f6f27717d53c238faf2f998810c9c5ee45d4
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14614
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
The following patches will allow the caller to specify a custom
completion callback to spdk_bdev_part_submit_request(). To do it
easily, consolidate completions of all I/O types into
bdev_part_complete_io().
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I083695189daa7e5271787c50947e428d01a83677
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15001
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If verify is enabled, both data and metadata are checked. However,
if verify is disabled, read data is not checked even if dif_check_flags
is not zero. Add DIF/DIX verification for read I/O at completion.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ibde44bc244f84e40cef68653978191363acca5ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15074
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For write, verify DIF/DIX before submission and for read, verify
DIF/DIX after successful completion.
As same as the NVMe bdev module and the NULL bdev module, DIF/DIX
verification is done based on the DIF type and DIF insert/strip is
not supported.
In near future, the bdev I/O APIs bring an I/O flag to the underlying
bdev and the malloc bdev module will be able to decide DIF/DIX
verification based on the I/O flag.
One important feature is to setup protection information when
creating a malloc disk. Otherwise, all initial reads will fail
if protection information is enabled.
For users, add some explanation about the dif_type parameter
into doc/jsonrpc.md.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I93757b77c03cade766c872e418bb46d44918bee2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14985
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The malloc bdev module supports both of interleaved and separated
metadata in this patch.
Different from the NULL bdev module, opts->block_size is a data block
size and a block size is caculated internally as a sum of
opts->block_size and opts->md_size if opts->md_interleave is true, or
opts->block_size otherwise. This will be more intuitive. Additionally,
opts->md_size accepts only either of 0, 8, 16, 32, 64, or 128.
Protection information (T10 DIF/DIX) will be supported in the
following patches.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Icd9e92c8ea94e30139e416f8c533ab4cf473d2a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14984
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Define a options structure, malloc_bdev_opts, and use it directly for
the bdev_malloc_create RPC. To do this, bdev_malloc.h includes
bdev_module.h instead of bdev.h to have the definition of the struct
spdk_uuid, and the struct malloc_bdev_opts has a instance of struct
spdk_uuid. Clean up file inclusion together. Furthermore, use
spdk_uuid_copy() to copy uuid from the malloc_bdev_opts to the malloc
disk rather than the = operator, and remove a duplicated size check.
These are helpful to add more parameters for creation.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ief25f12586c21b1666180ce10cfc6256ede8eba9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14982
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If we use a custom decoder for malloc disk's uuid for the
bdev_malloc_create RPC, the code is simplified. Furthermore,
when we add an options structure, we will be able to include
the options structure into struct rpc_construct_malloc directly.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ib36fa628569f973218f2cc5ce65a51181cd9fb71
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15125
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
We do not support Soft RoCE anymore. Remove a workaround for Soft RoCE's
bug that we amy receive a completion without error status after qpair is
disconnected/destroyed. Then add a assert to check if rdma_req->req is
not NULL. This will simplify the code and the following patches.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I80c349053adc0f79679eaf8a5d7265d555d3c2b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The following patches will support SRQ and SRQ will be per poller.
We will need SRQ in nvme_rdma_cq_process_completions().
It is not possible to identify poller if poll_group is passed to
nvme_rdma_cq_process_completions().
Based on these thoughts, add poll_group pointer to poller and pass
poller to nvme_rdma_cq_process_completions() instead of poll_group.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I322a7a0cc08bdcc8e87e720ad65dd8f0b6ae9112
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14282
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
NVMe-RDMA target has a helper function get_rdma_qpair_from_wc() and
uses it to identify a qpair from a WC.
NVMe-RDMA initiator has a similar function
nvme_rdma_poll_group_get_qpair_by_id().
NVMe-RDMA initiator will support SRQ in the following patches, and
it will want to identify a qpair from a WC.
get_rdma_qpair_from_wc() of NVMe-RDMA target uses wc->qp_num internally
anyway.
However, the upcoming custom transport for RDMA will have to use other
variables of WC.
Hence, it will be convenient to pass WC instead of qp_num if we consider
future enhancements.
Based on these thoughts, for NVMe-RDMA initiator rename
nvme_rdma_poll_group_get_qpair_by_id() by get_rdma_qpair_from_wc().
remove unnecessary declaration, and pass WC instead of qp_num.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I01ead4730207e2c6ac53b83f151bd5f977a11465
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Poller will have more shared resources when SRQ is supported.
This is a preparation.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Ic3d1cb93dde3f53653a9536a103e5518cebd58e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14173
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
nvme_rdma_ctrlr_disconnect_qpair() does not poll the qpair until it is
actually disconnected if it is in a poll group even if its async mode
is disabled. Hence, spdk_nvme_ctrlr_free_io_qpair() removes the qpair
from a poll group when it is being disconnected.
On the other hand, I/O qpair is destroyed after it is actually
disconnected.
When SRQ is enabled and used, a SRQ is destroyed if the corresponding
poller does not have any I/O qpair after an I/O qpair is removed from
the poller.
In particular, if we use spdk_nvme_ctrlr_free_io_qpair(), a SRQ is
destroyed before the corresponding I/O qpairs are destroyed.
Destroying a SRQ failed because it is still referenced by I/O qpairs.
This bug was found when running the SPDK NVMe perf tool with SRQ.
The reason was we had nvme_rdma_poll_group_process_completions() to call
disconnected_qpair_cb after the qpair is actually disconnected.
However, it is ensured that nvme_rdma_poll_group_process_completions()
calls disconnected_qpair_cb for any disconnected qpair.
Hence, remove a check if qpair->poll_group is not NULL from
nvme_rdma_ctrlr_disconnect_qpair() and update the comment.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I0fde0d827eec3280e1cc5a0fce34d163a6069bc4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
With RDMA, the admin poller can experience a remote disconnect when
processing completions. The admin qpair will be disconnected to handle
this. The disconnect code path will manually complete queued aborts.
However, the completion callback for the abort will attempt to resubmit
other queued aborts from the queue, which will result in a very large
stack and can eventually cause a segfault.
The fix is to not resubmit queued aborts if the admin qpair is in any
kind of failed state.
Change-Id: I4a6f959232c8a1bd30c87ca50459014e556cbaa0
Signed-off-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15114
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Currently, autotest_cleanup()'s failure causes the EXIT trap to
run it again. This step is not necessary, so clear the traps
prior running it.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I8f841186bf9e9c0e82c8afc409129acad393efe8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15154
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Currently, in case target directories are empty the directories
themselves are not being purged. Change that, as there is no
need to keep them around.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ia1a9d60a91508e74b7e106e0217414a8927029b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15153
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This is needed for newer Bash where $! becomes the PID of the
udevadm instead of being its child. Not killing udevadm properly
in this case may be problematic in case the script was run from
the ssh session - depending on the setup, if not all children
of said session are dead, ssh may block forever waiting for them
to terminate (which won't happen as udevadm gets attached to 1
process instead of being reaped).
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I3248d0937e9dd919c054a97473f9bb998aa8ca63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15147
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function was a bit cluttered so simplify it. Also, it was
assuming nbd module was loaded into the kernel prior running it -
this could silently fail the nbd_all[@] setup in case it wasn't.
Always attempt to load nbd driver before the setup and fail hard
if the driver is not in place.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I5884973944eae3e827eaafec16ba72e2cb4f70e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14994
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
zram doesn't support some of the uring-specific setup that xnvme may
be using, in particular the IORING_SETUP_IOPOLL, so switch to something
more common like null_blk module. For details see:
https://github.com/spdk/spdk/issues/2708
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I48b91ba356b4054433eb1835fa3e2708c8d2628c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
A loop inside 'nvme_tcp_qpair_process_completions' makes
'max_completions' actually behaving like a minimum:
do {
rc = nvme_tcp_read_pdu(tqpair, &reaped);
[...]
} while (reaped < max_completions);
Before this change 'max_completion' constraint, in its true sense,
was actually not respected and a loop inside 'nvme_tcp_read_pdu'
could be executed indefinitely as long as a recv state changed.
To prevent this behavior, max_completion must be passed to
'nvme_tcp_read_pdu' and used as an additional exit condition.
Signed-off-by: Szulik, Maciej <maciej.szulik@intel.com>
Change-Id: I28da962f4a62f08ddb51915b5d0dae9611a82dee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15136
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Enables DependaBot scanning on the spdk repo.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I0db032c547d28fae8e6e09a0b3179c3680cf8db2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15113
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some reset/disable paths are freeing the shadow doorbells without
switching the SQs back to BAR0. Fix this up, and add a small cleanup
when initializing the shadow doorbells.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ia5e5b91b7dc696a558eb0ad59cc554abced47cca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14901
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To support SQs allocated to a poll group other than the controller's
main poll group, we need to make sure to poll those SQs when we wake up
and handle the controller interrupt. As they will be running in a
separate SPDK thread, we will arrange for all poll groups to wake up
when we receive an interrupt corresponding to a vfio-user message
arriving.
This can mean needless wakeups: we don't (yet) have a mechanism to only
wake up the poll groups that correspond to a particular SQ write.
Additionally, as we don't have any notion of a poll group per
controller, this ends up polling all SQs in the entire poll group, not
just the ones corresponding to the controller we were handling.
As this has potential performance issues in many cases, it defaults to
disabled.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I3d9f32625529455f8d55578ae9cd7b84265f67ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14120
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_nvme_probe_poll_async() can only return 0 or -EAGAIN.
But the code currently indicates that other values might be
possible - so change the code to remove that confusion.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8e7b2e1183f6650043dd751d610d434d626efa7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15110
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change 'bdev_nvme_compare_trids' to name 'bdev_nvme_check_secondary_trid'
and 'bdev_nvme_compare_namespaces' to 'bdev_nvme_check_secondary_namespace'
which better explain the aim of these function.
RPC bdev_nvme_attach_controller only response "invalid parameter"
if the path is not sucessfully added due to not meeting the conditions
in bdev_nvme_compare_trids. Add more log.
Change-Id: If9ba6ec1d397d49689aa2ed6ab74fbfa96e16afa
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14251
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
