Accel modules can now implement the get_memory_domains() callback to
indicate the types of memory domains they support. If unimplemented, a
module is assumed not to support memory domains and accel will take care
of pulling/pushing data to local buffers prior to passing a task to be
executed by a module.
For now, similarly to the bdev layer, we only check if a module supports
memory domains, but we don't verify the types of the domains. That
could be easily added in the future, if necessary.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia513f4f31124672b705b6dd33a2624f0ae94d3ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16027
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If a task has buffers in a remote memory domains, we'll now allocate a
buffer from local memory and replace the original buffer with it. This
is the first step in supporting buffers in remote memory domains. To
fully support it, we'll also need to pull/push the data before/after
executing a task.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I3c86bbb6dbe6a31cb2cae8ce7d73e272ddc2734c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15944
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
All operations are using iovecs to describe their buffers and only
encrypt/decrypt additionally used nbytes to store the total size of a
src buffer. We don't really need this value in the generic accel code,
so we can let modules calculate it, if necessary. That way, we won't
waste cycles calculating it if a module doesn't use it and it makes the
code a bit easier, as we won't have to deal with the fact that nbytes is
only valid for certain operations.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I29252be34a9af9fd40f4c7fec9d0a0c1139c562d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16306
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also, since this was the last operation using dst and nbytes, these
fields were removed from spdk_accel_task.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0d6b090e101c016d1bdcbe7a3bee7d6f691f1c9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15943
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also, since this was the last operation using src, remove this field
from spdk_accel_task.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I55fd98697ef4f92a13dd0563b4adf9ccb0af171b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also, replace src2 with an iovec + iovcnt and rename it to s2 to
keep the naming consistent with the source buffer (s).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I44787128377addd514818ec5aaec084b1a31f0c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15939
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also, replace dst2 with an iovec + iovcnt and rename it to d2 to
keep the naming consistent with the destination buffer (d).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib394c127eeb5890451535ff485f96f7edd2897a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This patch is first in the series of patches aimed to make all accel
operations describe their buffers with iovecs. The intention is to make
it easier to handle tasks in a generic way.
It doesn't mean that we change the API - all function signatures are
preserved. If a function doesn't use iovecs, we use the aux_iovs array.
However, this does mean that each accel module that provides support for
a given operation will need to be adjusted to use iovecs.
Additionally, update the unit test checking copy elision to verify the
buffers of the copy operation that is left.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I9e6d8d1be3b8b9706cb4a6222dad30e8c373d8fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This patch introduces the concept of chaining multiple accel operations
and executing them all at once in a single step. This means that it
will be possible to schedule accel operations at different layers of the
stack (e.g. copy in NVMe-oF transport, crypto in bdev_crypto), but
execute them all in a single place. Thanks to this, we can take
advantage of hardware accelerators that supports executing multiple
operations as a single operation (e.g. copy + crypto).
This operation group is called spdk_accel_sequence and operations can be
appended to that object via one of the spdk_accel_append_* functions.
New operations are always added at the end of a sequence. Users can
specify a callback to be notified when a particular operation in a
sequence is completed, but they don't receive the status of whether it
was successful or not. This is by design, as they shouldn't care about
the status of an individual operation and should rely on other means to
receive the status of the whole sequence. It's also important to note
that any intermediate steps within a sequence may not produce observable
results. For instance, appending a copy from A to B and then a copy
from B to C, it's indeterminate whether A's data will be in B after a
sequence is executed. It is only guaranteed that A's data will be in C.
A sequence can also be reversed using spdk_accel_sequence_reverse(),
meaning that the first operation becomes last and vice versa. It's
especially useful in read paths, as it makes it possible to build the
sequence during submission, then, once the data is read from storage,
reverse the sequence and execute it.
Finally, there are two ways to terminate a sequence: aborting or
executing. It can be aborted via spdk_accel_sequence_abort() which will
execute individual operations' callbacks and free any allocated
resources. To execute it, one must use spdk_accel_sequence_finish().
For now, each operation is executed one by one and is submitted to the
appropriate accel module. Executing multiple operations as a single one
will be added in the future.
Also, currently, only fill and copy operations can be appended to a
sequence. Support for more operations will be added in subsequent
patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id35d093e14feb59b996f780ef77e000e10bfcd20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15529
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the 4 digit year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.
Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
In prep for upcoming iovec based compression/decompression patches.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I413493f764bead9e56266e488b74f8bca979e225
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14633
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In prep for adding both src and dst iovec support for compression.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I704b8d2bd459de03deb7f8ee45d76261910a3727
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13746
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is consistent with the use of terms in other parts of SPDK and fits
with the code living under module/
Change-Id: If182f7cf2d160d57443a1b5f24e0065f191b59b2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13919
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
