So far the schedulers had to calculate the diff of
current_stats - last_stats on their own to get tsc
from last scheduling period.
Renamed the current_stats to total_stats, but kept the meaning
as stats describing tsc for lifetime of a thread.
Instead change the meaning of the last_stats to describe
the tsc of only last scheduling period and change its name
to current_stats.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1a165ff7c1afe659b432c3127a351a96878d1f3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7843
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This UT was not working as intended, and was covered by
scheduler implementation and direct modification
of the lw_thread stats in UT.
A single _reactor_run() iterates over all active pollers.
If at least one returns busy, so does the thread.
Thread load at the begining of UT is not 'low', but 100% busy.
To emulate loads outside of the 100% busy/idle, multiple
spdk_thread_polls need to be exectued.
As such to keep this case simple, the busy poller is removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I21b4c607977ed5926e0bb2743c33636cfc49f328
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
At no point in the UT thread and reactor stats
were verified. This patch makes sure that those are
checked and points out a glaring issue fixed in the
next patch.
Please note that spdk_get_ticks() and spdk_delay_us()
increase a single global value, which does not play
well with tests simulating multiple reactors.
As such each round through reactors resets the
global timer and verifies it at the end.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I27878fe35c1606ec20c548fe3bb5ede0102c8a63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8020
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Before this patch idle_tsc was sum of all idle tsc of all
threads running on a reactor.
There are cases when no threads are present on the reactor,
and _reactor_run() spins doing nothing.
To give more accurate representation of the reactors state,
the idle_tsc now adds time spent doing idle spinning.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If797b2a03507d17b07367d56d5f6c40cefbbbd49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7900
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
tsc_last value is used to update thread stats
during _reactor_run(). See:
spdk_thread_poll(thread, 0, reactor->tsc_last);
If no threads were present on the reactor,
this value got outdated and resulted in
adding time reactor spent with no threads to
stats of the first thread placed on that reactor.
This patch fixes thread stats by making sure
that argument to spdk_thread_poll() is up to date.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0c35fdba1b63b6ee19a5a2b34751090839cb2438
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7845
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This patch does not change the UT in functional way.
Added accounting of last_tsc and spdk_get_ticks() similar
to the real application.
First the reactor_run() [not _reactor_run()] starts
reactor->tsc_last to current time. UT now set it at the start
and never touch it again directly.
Second the spdk_get_ticks() is updated to the elapsed time
to simulate flow of time, and make sure that its further
usage is up to date to the current time.
Fixed typo in test case description for test_reactor_stats.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iaa2eb00fa3bffc2f21f1692da0259f1d023086b8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7904
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Use spdk_thread_get_last_tsc() and spdk_thread_get_stats() in
unit tests for reactor. As a result, we can change one inclusion
from spdk_internal/thread.h to spdk/thread.h.
This is the same effort as spdk_poller.
The following patches will move the definition of struct spdk_thread and
enum spdk_thread_state from include/spdk_internal/thread.h to
lib/thread/thread.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I24d4a52ecf885b6e7db749616ee1f95b82574dc5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_reactor_set_interrupt_mode will send event to set
reactor into interrupt mode or poll mode, also set every
notify_cpuset on all reactors for consistency.
It can be used by RPC method or scheduler to set
reactor to interrupt mode while workload is lightweight.
Currently, this function is limited that the specific
reactor should have no attached spdk_thread.
Change-Id: I7e8f449bff1184b9a7948f80b9572066a19da60f
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5853
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Each bit of the cpuset indicates whether a reactor
is going to be in interrupt mode.
Each spdk_cpuset is allocated to each reactor. So it
can only be touched by its reactor.
Change-Id: Ic186de341588b701d7471bf09336309d28b1bf4e
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5850
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We don't want to make main core 100% busy, so don't
move thread to it if thread busy time is higher than
main core idle time.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib521ac0d8959ec8062322ff7b2ad587d85ccada5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5638
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Use DPDK based governor to change first core frequency
in dynamic scheduler. Core frequencies are adjusted
based on relative usages.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibeb9ca59fd67df27cfb0bfe752e66e5eef41b126
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This scheduler will group idle threads on first available
core and balance busy threads on other cores.
Change-Id: Ia0425c767dc3da2a66a9d82a20a0012fac83163c
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3901
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Record result of spdk_env_get_last_core() to
g_reactor_count, since spdk_env_get_last_core()
iterates through all core ids in a loop, it is
not so efficient.
Change-Id: I6bbbfec0bc25490bab33436c84fca3da6380cbe8
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5955
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This fixes issue where scheduler is not being
initialized on first set.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I881438955f08852fb72187a2b92c7acfb12cd662
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5029
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Move current scheduler to it's own module
and make use of new API.
Change-Id: I4928aed82603d51de01194c9650709e814f7f61b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4054
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It's not needed. Add it to one of the UT where it
is needed though.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I06628184c22df68deffce3ca0561878569ccf3f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4717
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Following patches will require thread termination so that thread_exit()
will move thread to exiting, thread_poll() will move thread from
exiting to exited, thread_is_exited() will detect the threadis exited,
and then call thread_destroy().
So change all places as a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b2e8aee5ed7cd160a88b4c9aaed7d90bd9dac07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1640
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following the idea of thread CPU stats, add reactor CPU stats.
Reactor CPU stats accumulates run time of spdk_thread_poll() calls
to idle TSC or busy TSC according to their return codes.
Add necessary unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I1a1391e79d74387c68f1651a61c8900e4c6faf66
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1501
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
CUnit provides a helper macro CU_ADD_TEST() that
simplifies usage of CU_add_test() function.
Test name no longer needs to be provided,
as it will be inherited from function name.
This is a follow up to
https://review.spdk.io/gerrit/c/spdk/spdk/+/931
Change-Id: I8078f02e08b14f12328ae022d7090ba13fbd64e4
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1239
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch changes the way that unittests initialize.
The new way is shorter and simpler.
It assumes that error during initialization is a fatal error,
but in our cases it always is.
This patch is a followp up to
https://review.spdk.io/gerrit/c/spdk/spdk/+/930
lvol_ut.c is the only test that skipped because
it runs same tests multiple times which is not allowed
by new method.
Change-Id: I0baf7ad09a35d5fca2dc4a03b4453c12c14f38a7
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1238
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add thread_count to struct spdk_reactor to count number of threads
per reactor. This number will be used in the next patch to know
if all threads are idle or not for each reactor to support CPU
power saving.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4f7cc5a6b78d85e9f8d0b539c60058c13e282759
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1169
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add a flag resched to check if reschedule operation is requested
to struct spdk_lw_thread. Add _reactor_resquest_thread_reschedule()
to set the resched flag, and add it to the case SPDK_THREAD_OP_RESCHED
in spdk_reactor_thread_op(), and return true in the case
SPDK_THREAD_OP_RESCHED in spdk_reactor_thread_op_supported().
Then _spdk_reactor_run() checks if the resched flag is true for each
thread. If true, set the resched flag to false, and remove the
thread and call _reactor_schedule_thread(). Add continue to avoid
use-after-free issue for both reschedule and terminate cases.
This idea follows voluntary thread termination and will remove our
worries for all complicated rare cases.
Add unit test case to verify this update.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I656872d32dbb469ae70f771cd0419a77236bfe18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/500
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove the prefix "spdk" from spdk_reactor_schedule_thread(), add
spdk_reactor_thread_op() and spdk_reactor_thread_op_supported().
For SPDK_THREAD_OP_NEW, spdk_reactor_thread_op() calls
_reactor_schedule_thread() and spdk_reactor_thread_op_supported()
returns true.
Then replace spdk_thread_lib_init() by spdk_thread_lib_init_ext()
with spdk_reactor_thread_op() and spdk_reactor_thread_op_supported().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I232a3b2c6bcaf4d86b0dd3cefacd3e47eadda6d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This API will be used in the upcoming reactor_get_stats RPC first.
This API is not public but internal in SPDK. Add necessary unit test
together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I761ffe3c8d6d8da4594c0d728b479f9f40275fc9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Test if spdk_reactor_schedule_thread() scheduled thread correctly
to one of the allowed cores. Use thread library and expect
spdk_reactor_schedule_thread() is called at the end of
spdk_thread_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibb536d16849c29081fb63341f5dbe1a4c0db1d18
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use the newly added mocks for CPU core operations.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If90bba6fd68c29c83cdb3c201a2a9fbdb40f6755
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478154
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add framework and a simple test case to test creating reactor.
Subsequent patches will add more test cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie0eb0e49bfe40469b351b21e40558a1bf5584cce
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478151
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
