This patch expands spdk_scheduler_core_info with two new
fields that will contain core stats only from last scheduling
period.
This will make sure that schedulers do not have to keep track
and calculate this value on their own.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3aa7dfa6a60c1d14d95a0e684e84c2e83f0a4496
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8048
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
(a5ad0f80) lib/event: update reactor tsc_last going poll mode
Patch above updated the tsc_last at the very end of changing
interrupt mode of the reactor.
The flow for turning from interrupt mode to poll mode is
first to send an event to the target lcore, then to iterate
over all reactors updating notify_cpuset on each.
Previous patch updated the tsc_last after notify_cpuset was
updated, meanwhile the threads could already been put on it.
This patch moves it immidietly to the point of changing
the in_interrupt state.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6aea252016f4706369b8b597b765593bc6edca3b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8111
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Renamed core_busy_tsc and core_idle_tsc to better
describe that they contain particular core stats for
its whole lifetime.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6f16b2b0a162aad8fbaf18f549fc50a2372b920b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8047
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
There is no need to keep new_lcore field.
lcore value is enough to determine the target core.
Meanwhile _threads_reschedule() can see if the target
core matches the one from core_info.
Removed _spdk_lw_thread_set_core() since it did not
serve much purpose.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I82c7cfebf1107b4a55b2af9b891052084a788907
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8046
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
lw_thread->lcore was set during gather_metrics,
rather than just after the thread reschedule.
This patch just moves it to the right place.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0477830902f68102e4e4f0ffc9359bd004a8ad42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7961
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
So far the schedulers had to calculate the diff of
current_stats - last_stats on their own to get tsc
from last scheduling period.
Renamed the current_stats to total_stats, but kept the meaning
as stats describing tsc for lifetime of a thread.
Instead change the meaning of the last_stats to describe
the tsc of only last scheduling period and change its name
to current_stats.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1a165ff7c1afe659b432c3127a351a96878d1f3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7843
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Rather than to rely on schedulers to access and modify
last_stats values over multiple scheduling periods, move that
operation to event framework.
Providing this to the schedulers in generic manner is better
than enforcing that each scheduler has to keep track of this
data on their own.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Icaf3b4af80d86fafaddf328fd230db9743d21ab5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
_reactor_schedule_thread() zeroes out the lw_thread on move.
To properly calculate thread stats since the move,
save them right after reschedule.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I44cc3b5907adda35b3117c2dd7268dc813d59853
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7919
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_thread keeps track of tsc from its whole lifetime,
those can be requested with spdk_thread_get_stats() at any time.
spdk_lw_thread uses stats from above and keeps track of two points in time:
- current_stats reflecting stats at the time of gather_metrics stage
- last_stats reflecting stats from previous gather_metrics stage
1)
Before this patch current_stats were duplicated in snapshot_stats.
There is no need for that so now they are removed.
2)
Removed _spdk_lw_thread_get_current_stats() since it would be copying
current_stats to current_stats, thus not perform any action.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5e5d4039cd0f7cc10ba150a3d915b90ec96589d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7842
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Whenever an event executes, it might change the currently
set thread or reset it to NULL.
To prevent it from affecting other events, set the current
thread each time an event executes.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6f1e7f8b7acab25353b4782058e87a9e01aab2c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8045
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Before this patch idle_tsc was sum of all idle tsc of all
threads running on a reactor.
There are cases when no threads are present on the reactor,
and _reactor_run() spins doing nothing.
To give more accurate representation of the reactors state,
the idle_tsc now adds time spent doing idle spinning.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If797b2a03507d17b07367d56d5f6c40cefbbbd49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7900
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Disabling interrupt mode on reactor now updates the tsc_last
to current time. So any further tsc caulations will not account
for the time when reactor was in interrupt mode.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I56fb8a738eea60ee5de3b49d586f7cb228b54510
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7901
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
tsc_last value is used to update thread stats
during _reactor_run(). See:
spdk_thread_poll(thread, 0, reactor->tsc_last);
If no threads were present on the reactor,
this value got outdated and resulted in
adding time reactor spent with no threads to
stats of the first thread placed on that reactor.
This patch fixes thread stats by making sure
that argument to spdk_thread_poll() is up to date.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0c35fdba1b63b6ee19a5a2b34751090839cb2438
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7845
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
When do spdk_reactor_set_interrupt_mode, if reactor
already runs in the specific mode, directly call
callback function before return 0;
Change-Id: I1fd8b753e9881755aa128aabe6d1e2749e58b39b
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7549
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The interrupt mode of spdk_thread can be operated
by reactor based on reactor's interrupt mode when
the spdk_thread is scheduled or the reactor is set
into interrupt mode.
Change-Id: Ibeef7ffb759589a7b372bd78e59e3410be061383
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6709
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In the case that reactor is needed to be valid, add an
explicit assert there.
Change-Id: Ic47030d50a6a940ddf87a3744bae38c94dd7252e
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7320
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Move get_rusage directly into reactor_run(), then both
poll mode and interrupt mode can check rusage info.
Change-Id: Id5926752cfb19c13cb969fbfbb35f643e5d49d9a
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6718
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
In interrupt mode, reactor spends its valid cpu cycles
to process registered thread interrupt function. So we
can count idle_tsc and busy_tsc in it, and update
reactor's last_tsc in it.
Change-Id: I65f4ae7d3b1e5c7c5c06937d6855f5d1b5c0349f
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Current update_core_mode is started from the next
core of the master core.
For futher's new scheduler, starting from master
core is required. This change won't impact current
schedulers' behavior.
Change-Id: Ibffd2c93a4288b5e87945ae523ccba88091c4031
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6757
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In _set_thread_name, use pthread_setname_np as the default for
platforms that are not Linux or FreeBSD; it's the most common
'non-portable' pthread extension used to set the thread name.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Ia841166f0537cd1303eded15bc7ef1a9f03e3b6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Those spdk threads were neither used nor tracked in event framework.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1becee6390e172a10e08754703e018f7c44e30df
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6213
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This reverts commit 72eed604b4.
spdk_vhost_init() relies on having a thread on each reactor.
Without the revert, every vhost controller is created on the same
core and even passing --cpumask when creating does not affect it.
Proper fix would be to change spdk_vhost_init(),
but would require additional testing. For now revert the patch
that spawned always idle threads.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0dbd6c9fe1d9d23ada260da8fc7b48086223c632
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6186
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
We want to avoid an active for_each_reactor operation
while the reactors are being shut down.
Fixes issue #1766
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I30bc258c5b22545320080d269a1ed8cb0b4e12f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6104
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using reactor once insteads of target to fix this warning.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I30cd6be26669fe1b2c5d694c15bfda223efd3b85
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_reactor_set_interrupt_mode will send event to set
reactor into interrupt mode or poll mode, also set every
notify_cpuset on all reactors for consistency.
It can be used by RPC method or scheduler to set
reactor to interrupt mode while workload is lightweight.
Currently, this function is limited that the specific
reactor should have no attached spdk_thread.
Change-Id: I7e8f449bff1184b9a7948f80b9572066a19da60f
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5853
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently, spdk_thread can't get executed on reactor
which is in interrupt mode but interrupt of spdk_thread
is not enabled. So avoid schedule spdk_thread on it.
Change-Id: Ib37d1585f173ed3be8def83cd18aef65e287361c
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5852
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Each bit of the cpuset indicates whether a reactor
is going to be in interrupt mode.
Each spdk_cpuset is allocated to each reactor. So it
can only be touched by its reactor.
Change-Id: Ic186de341588b701d7471bf09336309d28b1bf4e
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5850
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Those spdk threads were neither used or tracked in event framework.
Needed to edit hardcoded cpumask value in spdkcli test to accept any string.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ieffea1bdf467f50ec0bd3af4b17a1d259fd876b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Added rpc to get name and period of currently set spdk scheduler
and name of currently set spdk governor.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I5562a81a7f9e4879bd48a765c9467f70b43f73ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5917
Community-CI: Broadcom CI
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This field will be used in upcoming patches
by scheduler to keep a history of threads
statistics. Base on those scheduler will
be able to calculate how busy a thread is.
Also we have to save the value of this field
while rescheduling thread.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iffbd1f946e1d159ec7277a39bc30161e71722456
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5972
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Size of g_reactors allocated is g_reactor_count, so
valid lcore should be less than g_reactor_count.
Change-Id: I9d5cde7856d6b400a7188631812b53a7e5701d0f
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5870
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Record result of spdk_env_get_last_core() to
g_reactor_count, since spdk_env_get_last_core()
iterates through all core ids in a loop, it is
not so efficient.
Change-Id: I6bbbfec0bc25490bab33436c84fca3da6380cbe8
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5955
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
That is more inline with other places we
do things like this in SPDK. Also change
argument type to uint64_t.
Change-Id: Ie98f6c37bf53d583431ea9edd7d977075aeaa7a0
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be used by a scheduler while balancing threads
to get information how much busy a thread is.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib0e897a9bb5d2a71173f60cce7e1d442e67a57f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This fixes issue where scheduler is not being
initialized on first set.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I881438955f08852fb72187a2b92c7acfb12cd662
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5029
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
master_core will still be available but deprecated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6fe9eb7fecb2919795c439a02cb7d9d06a2774d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5358
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A round of _reactors_scheduler_gather_metrics should be stopped
when there is calloc failure.
Change-Id: Ic2220c561abb07a849ea37d3c88af3f6d5d1ffa1
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4882
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Features:
- does not delay thread creation
- does delay thread deletion
- singlethreaded, but can be made multithreaded.
By being singlethreaded, we don't waste time,
because reactors are not paused during rescheduling,
but we do make statistics less up to date
Change-Id: Ie5a7e8569bc32b3fd4bb887804dfbc3f5c2ea858
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3899
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move current scheduler to it's own module
and make use of new API.
Change-Id: I4928aed82603d51de01194c9650709e814f7f61b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4054
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add structures and function for new scheduler API.
Change-Id: I8e379db62189eb7c36092265c137f07368650e9b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4053
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
