When the property is 8 bytes but the host only requested
4, we need to mask and only return the bytes requested
by the host. Wait to do the DEBUGLOG until after
that has happened.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8f476a47e9fd07bf652fd64f3b1c17d650374167
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8506
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Interpret bare --with-dpdk opt as user's request to find installed
(provided by the distro) DPDK's libs|include files and use them during
the build.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I9da99671b95af0121194b3a6d53636b0ded71f1b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8348
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: <tomasz.rochumski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Was using "dst" in some cases and "crc_dst" in others for crc32c
related calls. Update them to always use crc_dst
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icf200f1734c64c29881f23b02b8d12bad81b3ca0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8186
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Recent work identified race conditions having to do with the
dynamic flow control mechanism for the idxd engine. In order
to both address the issue and simplify the code a new scheme
is now in place. Essentially every DSA device will be allowed
to accomodate 8 channels and each channel will get a fixed 1/8
the number of work queue entries regardless of how many
channels there are. Assignment of channels to devices is round
robin and if/when no more channels can be accommodated the get
channel request will fail.
The performance tests also revealed another issue that was
masked before, it's a one-line so is in this patch for convenience.
In the idxd poller we limit the number of completions allowed
during one run to avoid the poller thread from starving other
threads since as operations complete on this thread they are
immediately replaced up to the limit for the channel.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I913e809a934b562feb495815a9b9c605d622285c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8171
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In spdk_idxd_configure_chan(), if memory allocation fails in
TAILQ_FOREACH() {} code range, we will goto err_user_comp and
err_user_desc tag, in which we donot free chan->completions
and confused batch->user_completions with chan->completions.
Memleak problem and double free problem may occurs.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: I0e588a35184d97cab0ea6b6c013ca8b3342f940a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8432
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
When a qpair is destroyed and the qpair is the last,
_nvmf_ctrlr_free_from_qpair() (in lib/nvmf/nvmf.c) sends two messages,
one is for _nvmf_ctrlr_destruct() and another is for
_nvmf_transport_qpair_fini().
We do not know which of two completes earlier.
_nvmf_ctrlr_destruct() frees the qpair->ctrlr in the end.
On the other hand, _nvmf_ctrlr_free_from_qpair() calls
spdk_nvmf_poll_group_remove() in the end, and spdk_nvmf_poll_group_remove()
accesses the qpair->ctrlr to free queued requests to the qpair.
Before one recent change, spdk_nvmf_poll_group_remove() had been called
before _nvmf_ctrlr_free_from_qpair() was called.
Hence extrace the operation to free queued requests from
spdk_nvmf_poll_group_remove() and inline it into _nvmf_qpair_destroy().
Fixes one showstopper error to investigate the issue reported in #1819.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I29c43ff7b289fc77a5de9c33e0266301c412e208
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Previously core load was only considered for main lcore.
Other cores were used based on cpumask only.
Once an active thread was placed on core it remained there
until idle. If _get_next_target_core() looped around,
the core might receive another active thread.
This patch makes the core load matter for placement of any thread.
As of this patch if no core can fit a thread it will remain there.
Later in the series least busy core will be used to balance
threads when every core is already busy.
Modified the functional test that depended on always selecting
consecutive core, even if 'current' one fit the bill.
Later in the series the round robin logic for core selection
is removed all together.
Fixed typo in test while here.
Note: _can_core_fit_thread() intentionally does not check
core->interrupt_mode and uses tsc. That flag is only updated
at the end of balancing right now. Meanwhile tsc is updated
one first thread moved to the core, so it is no longer
considered in interrupt mode.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I95f58c94e3f5ae8a468723d1dd6e53b0e417dcc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8069
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Idle threads are always moved to main core, there are no
other considations. Doing it as separate first pass,
allows to have the core stats be up to date for second
pass for active threads.
Core load stats will be used later in the series to determine
optimal target core for an active thread.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6a9bc11b86e954e461f7badebf3a6e4d1718f63c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be needed when doing multiple passes over
all threads. See next patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4e9c749d69314fc268cbcb9334862392100b651e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8066
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When picking a path to go down with a thread,
conditions unnecessarily piled up.
Instead do it either of two ways:
- move idle threads to main core
- find best core for active threads and move them there
There is no need to worry about cpumask of the thread,
since _find_optimal_core() will always return a core
within the cpumask.
If the found core is the same one as the current,
_move_thread() won't perform any action.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0f4782766c15c86b5db0c970cfc9547058845b2a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Refactors logic for finding the optimal core for a thread
to single function.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifc2b09acb6f698640ce9602fec4f567eb32b79fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6732
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Refactor all thread moves and core stats updates to single function.
At this time in series only tsc of main core was modified and
only idle tsc of main core was used. Main core would be either
the destination core or the source core. In both cases, the idle
time for main core had to be updated.
This patch generalizes this logic to always move the execution
time from source core to destination core.
As a byproduct cores besides main core have the stats updated,
which will be useful later in the series. Once core load will
be the deciding factor for choosing a core.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I57564e8b2632f919869d74e8f10b01fb3dda3be9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6658
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Now that the trace library can handle multiple arguments, there's no
point in passing 0 for tracepoints that don't have any arguments. This
patch removes all such instances. It allows us to to verify that
`spdk_trace_record()` was issued with the exact number of arguments as
specified in the definition of the tracepoint.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Idbdb6f5111bd6175e145a12c1f0c095b62d744a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8125
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Replaced calls to `spdk_trace_record_tsc(spdk_get_ticks(), ...)` with
`spdk_trace_record(...)`, which does the same thing but is more consise.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib96e0bc0225490dadf857e1ddd2a3ecbf71e98c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8444
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Now that each tracepoint can have more than one argument, we cannot pad
the missing ones, as it would take too much space. Therefore, we put
them at the end of a line and simply skip the missing ones.
Additionally, since empty arguments are no longer padded, this patch
stops recording arguments with names consisting of an empty string
(containing just '\0').
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5199a3219a31d6afd3178324a4f48563b84e6149
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7958
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that `spdk_trace_record` receives variadic arguments, we no longer
have to pass strings as uint64_t, but can pass them directly as
pointers. That also means that the recorded strings can be longer than
8B (up to 40B).
This patch changes the blobfs code to pass the filenames as strings and
gets rid of the code that converted them to uint64_t.
Additionally, the maximum length of string arguments printed by
`app/trace/trace` has been extended to 16 and they're also padded to 16
characters, to better align with other argument types.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ibe94452bf1b27eba2b15ca8608d0c3b55c2db360
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7957
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch allows tracepoint to record a variable number of arugments.
An additional function has been added,
`spdk_trace_register_description_ext()`, which allows the user to
register definitions for tracepoints specifying all the arugments that
they accept. Users can also call `spdk_trace_register_description()` to
register tpoints with a single argument (or none).
Currently, all of the tracepoint arguments need to be passed as
uint64_t.
The trace record functions use variable arguments and rely on tracepoint
description to know the order and the format of the arguments passed.
That means that the user needs to take care that they're always in sync.
Moreover, this patch extends the tracepoint entry size from 32B to 64B,
meaning that there are 40B that can be utilized for passing arguments,
which in turn means that there can be up to 5 arguments per tracepoint.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I9993eabb2663078052439320e6d2f6ae607a47ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7956
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Move the definition of structure spdk_io_channel into
lib/thread/thread_internal.h, so we don't have to update SO_VER for
other libraries in future when we need to change the internal details on
the structure.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I3d2ca7a8737972e0b33ce92e464da42c48f89dec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8189
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If we're not a DEBUG build, vfu_setup_log() was effectively forcing a
libvfio-user logging level of LOG_ERR. Instead, let the log handler decide what
to report, so we can respect the SPDK levels.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ib3ad62589f495a377885f7deabaf02b428e83d30
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8452
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Commit b7cc4dd added support multiple AERs, but didn't
remove the code that hardcodes aerl=0 for non-discovery
controllers. So even though the target now supports
multiple AERs, we never indicate that for non-discovery
controllers.
The spec also recommends that implementations support
a minimum of 4 AERs - so the current behavior is not
recommended.
It seems that at least on Windows (when testing with
vfio-user transport) we see the limit get exceeded
which results in ERRLOGs. Let's keep the ERRLOG there
for now, assuming that once we report we support 4
AERs that Windows won't try to send more than that.
Fixes issue #2000.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6a07a6f37aaa6e531ae2cf1e1c46da036b00785b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8488
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We cannot control what the host may send to the target.
For example, we have empirical evidence that Windows
will send vendor-specific IDs for features and log pages
(when testing with the vfio-user target transport).
So let's change the ERRLOGs in these cases to DEBUGLOGs.
Fixes issues #2004, #2007, #2008.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8d5b92fc5e33d698af246f2f1c34f7cf51e6488a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
1. Update with latest vfio-user specification changes.
2. The new libvfio-user will not expose dma_sg_t data structure
any more, SPDK should use pointer and allocate memory for it.
Change-Id: I619b0c0828cbe3b050c628bff4c4ce7ee840510f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8377
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Community-CI: Mellanox Build Bot
When creating queue pairs, the original code uses a stack
queue variable and copy it to queue pair in insert_queue
function, the coming changes in libvfio-user doesn't expose
dma_sg_t data structure any more, we need to change it to
a pointer and allocate memory for it, so here we eliminate
insert_queue function as a preparation.
Change-Id: Iee94029d24bc8882ec169665e229e6cbc11564c0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8376
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Thread is private data of spdk_io_channel, bdev should use
spdk_io_channel_get_thread() to access it. This prepares for the upcoming
change to make the definition of struct spdk_io_channel private.
Change-Id: I643c8d677e22f6d8dde2faf91bb2711d3f5d81b8
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8426
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
in-capsule data over 4KiB when using the Linux initiator.
This is fixed in the latest kernel. See
https://lists.infradead.org/pipermail/linux-nvme/2021-May/025641.htmlFixes#1823
Change-Id: Ie383ea774ee31ef8fe255119095b21603483c33f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8424
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In blob_load_cpl(), spdk_realloc() is called to realloc
memory of ctx->pages. If spdk_realloc() return NULL,
the ctx->pages is set to NULL without being freed,
and then a memleak problem occurs.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: Idf21b690e89beab0245ba57a5de66a4f506d54fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8308
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If the transport returns error when polling for
completions, it gets to a uint32_t and we end up
trying to resubmit all of the requests that are
currently queued. But that's not correct - if
the transport returns an error we shouldn't be
trying to resubmit requests at all.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9198e3e2d71875cc1e46e0ac928338bb983487f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8395
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvmf_ctrlr_get_log_page used req->data to store the log page result.
While the req->data only contains the first iov, if req->iovcnt is
larger than 1, the req->data may not hold the complete log page; and
even worse, the log page result may be written to invalid address and
cause memory corruption.
Change-Id: Ie6415a6bd2327419fe4b32f21ac814fd827c9e95
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7970
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Currently, the SPDK "core_mask" environment option only supports setting either
"-l" or "-c". Allow applications to specify more complicated options by sniffing
for a leading "-", and passing that string through unchanged. This allows, for
example, --lcores to be used as described here:
https://doc.dpdk.org/guides/linux_gsg/linux_eal_parameters.html
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I38cc54bfcd356f3176cde7848e592525f9231e3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7933
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The common bdev layer will split large WRITE ZEROES ranges into
multiple children requests based on the backend device's setting,
it will try to split up to 8 children requests at a time to avoid
flood requests.
Also add UT to cover different cases.
Change-Id: Id9505fbe1c297412ef97b1f73587b22bc43f770e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7875
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This mutex is not used anywhere. After removing mutex from struct
spdk_scsi_globals, struct spdk_scsi_globals is empty. Hence then
remove struct spdk_scsi_globals. We can create struct spdk_scsi_globals
again if it becomes necessary.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I749ae43f7735a7c9383d090eae2093bb52607f17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add three parameters, pdu_pool_size, immediate_data_pool_size, and
data_out_pool_size to the RPC iscsi_set_options to run iSCSI target
with little memory.
For some use cases, we want to keep the max number of connections,
but simultaneously we want to reduce the pool size and let I/Os wait
until resource is provided.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I74dc785310b1d985f3e338c1e13fba3a3840d113
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In nvmf_vfio_user_listen(), fd should be closed before
set it to endpoint->fd, otherwise, the fd leakage probem
occurs.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: I3fabc65d2764926e5873475962e4362e46eb37e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8309
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In spdk_idxd_get_channel(), if chan->batch_base is allocated
faild, we should free chan before returning NULL.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: Ia652c334aead592429c1171da73d67160879686d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8301
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In ioat_channel_start(), if spdk_vtophys(ioat->comp_update) returns
SPDK_VTOPHYS_ERROR, spdk_free is called to free ioat->comp_update,
and ioat->comp_update is not set to NULL. However, the caller
ioat_attach() will also call ioat_channel_destruct() to free
ioat->comp_update, then double-free problem occurs.
Here, we will not free ioat->comp_update in ioat_channel_start(),
ioat_channel_destruct() will do that.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: I3be19a3feec5c2188051ee67820bfd1e61de9b48
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8300
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
POSIX defines %z for printing size_t values in a portable way.
Replace a reference to %ld to remove the assumption about
the type of size_t.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I2186aa5e7072f565ea75de935e22c2c23acf1a1a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8341
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In blob_serialize_add_page(), *pages is set to spdk_realloc(*pages).
If spdk_realloc() returns NULL, the *pages pointer will be
overridden, whose memory will leak.
Here, we introduce a new var (tmp_pages) for checking the return
value of spdk_realloc(*pages).
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: Ib2ead3f3b5d5e44688d1f0568816f483aa9e101f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8307
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In spdk_fs_create_file_async(), file->name is set to strdup(name).
We should check whether file->name is equal to NULL.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: I2219cc353eb4711290aee2599505f57af9088bb2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8302
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If iscsi initialization fails (due to a memory allocation
failure for example), we may not even get to the point
where the g_iscsi global is registered as an io_device.
So then when we tear down the iscsi library using
spdk_iscsi_fini(), we need to make sure we don't
try to unregister g_iscsi if it wasn't registered.
For now, just use the g_init_thread global to make this
determination - it's set just after we register the
io_device.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic9443564ef67b9c0df0fce47a346f4608749c306
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8351
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Because we use spdk_dma_malloc, then it does not init
the the contents in the memory.
Fixes#1996
Change-Id: Ieef411f6ae5114de9f732df6096e0bb123efb7e0
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8374
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
In spdk_nvmf_subsystem_add_ns_ext(), ns->ptpl_file is set to strdup(),
which may return NULL. We should deal with it.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: If95102fe9d6d789b8ba9e846c4d7f4e22e48a93c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8305
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nbd will be closed in nbd poller function asychronously.
Unify the stop process of HARDDISC and SOFTDISC in same place.
Prepare for following patch.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: Ida33ff6d081e68290cfa393c0c47fe7af545958b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8036
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
For receving the pdu, we add the crc32c offloading by Accel framework.
Because the size of to caculate the header digest size is too small, so
we do not offload the header digest.
Change-Id: If2c827a3a4e9d19f0b6d5aa8d89b0823925bd860
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7734
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
siginfo_t is a GNU extension. SPDK (and DPDK) have
direct dependencies on GNU extensions, but it's a bit
nicer if external modules don't also need to define
_GNU_SOURCE. Currently siginfo_t parameter in the
spdk_pci_error_handler is the only thing that violates
this.
Note that DPDK also supports registering sigbus handlers,
but they take the failing address as a parameter instead
of the full siginfo_t structure. Let's adopt the same
for SPDK.
While here, remove an extra semicolon that was just after
the virtio sigbus handler function signature that was
updated in this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I07faf11a3ac3589c637cb2196581c102286b1e68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8333
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
At this time only main lcore frequency is changed,
depending on its load either up or down.
Exception is when at least a single busy thread is present
on non-g_main_lcore. Then the main lcore frequency is set
to the maximum possible.
This patch moves when that is determined, from 'moving'
logic to one that sets reactors to interrupt mode.
If at least one thread is present on non-g_main_lcore,
it has to be busy. Otherwise it would be placed on main lcore.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2900598afe53fb609e1f06a60d5245f74511e1c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8050
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This field was only used to keep track of number of threads
that will be present on a core after scheduler moves.
It was used only internally within scheduler_dynamic.
Event framework has no need to keep such field in core_info.
Instead added field in cores_stats internal to scheduler_dynamic.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3ce74d4a25eac81e58da8705a1c4553730fc1e57
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8049
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added core_stats structure that will hold stats modified
during balancing.
Further patches will modify the values in this structure,
to for example judge how much execution time a core
has left.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib8e611e36642c4543b5cb43bc2695c613d38f0fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6657
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
