An esnap clone is now deletable when its external snapshot is missing.
Likewise, the tree of degraded lvols rooted at a degraded esnap clone
can also be deleted, subject to the normal restrictions.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I711ae25d57f5625a955d1f4cdb2839dd0a6cb095
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17549
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This introduces an examine_config callback that triggers hotplug of
missing esnap devices.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I5ced2ff26bfd393d2df4fd4718700be30eb48063
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16626
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If an esnap clone is missing its snapshot the lvol should still open in
degraded mode. A degraded lvol will not have a bdev registered and as
such cannot perform any IO.
Change-Id: I736194650dfcf1eb78214c8896c31acc7a946b54
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16425
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This provides information about logical volumes without providing
information about the bdevs. It is useful for listing the lvols
associated with specific lvol stores and for listing lvols that are
degraded and have no associated bdev.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I795161ac88d9707831d9fcd2079635c7e46ecc42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17547
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add RPC interfaces for creation of esnap clone lvols. This also
exercises esnap clone creation and various operations involving
snapshots and clones of esnap clones to ensure that bdev_get_bdevs
reports state correctly.
Change-Id: Ib87d01026ef6e45203c4d9451759885a7be02d87
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14978
Reviewed-by: Michal Berger <michal.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Now autotest_common.sh is tolerant of tests that use "set -u" so that
they quickly generate useful errors when variables are used but not set.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I5d7709f3029fa8f52affecf68a4b9da97a84589d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16703
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This adds test/lvol/esnap for functional tests lvol esnap clone bdevs
without RPCs or reactors.
Change-Id: If62b1bde2b19343af51ba4c11599623556484b0d
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This adds the ability for create esnap clone lvol bdevs.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ifeef983430153d84d896d282fe914c6671283762
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16590
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Register an spdk_bs_esnap_dev_create callback when initializing or
loading an lvstore. This is the first of several commits required to add
support enable lvol bdevs to support external snapshots and esnap
clones.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I35c4e61fdbe5b93d65b9374e0ad91cb7fb94d1f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16589
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_lvol_get_by_uuid() allows lookup of lvols by the lvol's uuid.
spdk_lvol_get_by_names() allows lookup of lvols by the lvol's lvstore
name and lvol name.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Id165a3d17b76e5dde0616091dee5dff8327f44d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17546
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add an interator that calls a callback for each clone of a snapshot
volume. This follows the typical pattern of stopping iteration when the
callback returns non-zero.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: If88ad769b72a19ba0993303e89da107db8a6adfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17545
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This exercises spdk_lvs_esnap_notify_hotplug() under a variety of happy
and not-so-happy paths.
Change-Id: I1f4101a082b113dacc7d03f81ca16069acfb458d
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17602
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This introduces spdk_lvs_notify_hotplug() to trigger the lvstore to call
the appropriate lvstore's esnap_bs_dev_create() callback for each esnap
clone lvol that is missing the device identified by esnap_id.
Change-Id: I0e2eb26375c62043b0f895197b24d6e056905aa2
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16428
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If an lvol is opened in degraded mode, keep track of the missing esnap
IDs and which lvols need them. A future commit will make use of this
information to bring lvols out of degraded mode when their external
snapshot device appears.
Change-Id: I55c16ad042a73e46e225369bfff2631958a2ed46
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16427
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_blob_is_clone() should return true only for normal clones. To
detect esnap clones, use spdk_blob_is_esnap_clone(). This also clarifies
documentation of spdk_blob_is_esnap_clone() to match the implementation.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I9993ab60c1a097531a46fb6760124a632f6857cd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17544
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In preparation for supporting degraded lvols, spdk_blob_is_degraded() is
added. To support this, bs_dev gains an optional is_degraded() callback.
spdk_blob_is_degraded() returns false so long as no bs_dev that the blob
depends on is degraded. Depended upon bs_devs include the blobstore's
device and the blob's back_bs_dev.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ib02227f5735b00038ed30923813e1d5b57deb1ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17516
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
While getting memory domains, vbdev_lvol will need to be able to access
the bdev that acts as the lvol's external snapshot. The introduction of
spdk_blob_get_esnap_bs_dev() facilitates this access.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I604c957a468392d40b824c3d2afb00cbfe89cd21
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16429
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It is now possible to append an operation calculating crc32c to an accel
sequence. A crc32c operation needs special care when it's part of a
sequence, because it doesn't have a destination buffer. It means that
we can remove copy operations following crc32c only when it's possible
to change the dst buffer of the operation preceding crc32c.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I29204ce52d635162d2202136609f8f8f33db312d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17427
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also, shuffle DAOS pieces a bit to keep repo handling in one place.
Also, also switch ceph repo to an actively supported release, common
and available for both centos|rocky 8|9 (i.e. pacific).
Change-Id: Idb19e4a5ff80770c7d6f9e6db85f983e163958e6
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17661
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Increase the memory for spdk virtio initiator
processes using "-s" option.
See https://review.spdk.io/gerrit/c/spdk/spdk/+/1737122fa84f77a
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I2f425cb547e72e1ac6748e777158427dcf57b9f0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17662
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are several failing signatures observed as
part of issue #2943. So disable the unit tests for
now until they are debugged.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iae54f8bfcd7883c02152abee37410a998da81dd7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17573
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Call sync each time, as an extra step, to make sure all the writes on the underlying device completed. This is needed, as on occasion parted (called right after wipefs) fails to create pt complaining that the target device (and its partitions) are still in use.
Change-Id: I959d9b36a1588ec3754335995e3e8bc5057bfeb7
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Add unit test for calling spdk_lvs_load_ext()/lvs_load()
with invalid options (opts_size is 0).
Change-Id: I9c48b972066cf977304e3efa936827d1ef1b5250
Signed-off-by: Marcin Spiewak <marcin.spiewak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17584
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When changing src/dst buffers, we copied memory domain pointers, but we
didn't copy memory domain context, which is obviously incorrect. It was
probably missed, because we never append a copy with non-NULL memory
domain. Added a unit test case to verify this behavior.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic174e0e72c33d3f437f0faddd3405638049f0c74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17425
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This file should be external to enable out-of-tree accel modules.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2e973d0e88d7145d0fc9714f56db48486b00f3b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17419
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_bdev_queue_io_wait() can only be used when one of bdev submission
functions returns ENOMEM (i.e. there are no more spdk_bdev_ios on that
IO channel). Using it in any other case, e.g. on spdk_accel_append_*()
returning ENOMEM, will most likely result in failure. Therefore, to
avoid that, the IOs are completed with NOMEM status relying on the bdev
layer to retry them.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie0f03496e5d3180c481815b3f1b021e74ae2f46d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17319
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This actually allows malloc bdev to chain multiple accel operations
together. And, since the last operation will always be a copy, accel
should remove that copy by modifying previous operation's dst/src.
On my system, it improved bdevperf performance (single core, qd=4,
bs=128k, bdev_crypto on top of bdev_malloc, crypto_sw):
randread: 5668M/s -> 8201M/s
randwrite: 5148M/s -> 7856M/s
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5b9173fa70a42ee56f56c496a34037d46d2f420f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17202
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This only changes the interface bdev_malloc uses for scheduling the copy
to appends, but it won't chain those copies to an existing sequence, as
bdev_malloc doesn't report support for accel sequences yet. That will
be changed in one of the subsequent patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6db2c79b15cb96a1b07c6cf5514004c76b9d2e92
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17198
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
It always returns 0 and any errors are reported in the callback. Making
it void simplifies error handling.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0d4299a2789a688eae38d76de46d1baf27cbbd8f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17194
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
This test sends several read/write requests and verifies the expected
number of accel operations have been executed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Idda46ef00dc5bcc0a176d3dfb39f3f3861964741
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17193
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
095f40630e missed the autobuild dependencies while enabling the rpm
test against the external DPDK build. Without it, DPDK is not able
to properly configure itself against ipsec and isa-l libs.
Change-Id: Ia4307f0d0f9c1f82f6f80ca06113a5289c2916ed
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17576
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Dump it to stdin to make the debugging easier.
Change-Id: I9b13d0a77e45aa84ec2a55b7b982225592f2566d
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17560
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some nvmes need more time to attach|detach to|from, hence having a
static sleep is not ideal depending on what type of the nvme was
picked up for the test. Instead, simply wait until the list of
nvme ctrls is empty after the cleanup.
Change-Id: I2fc2630020436d0e1f6b01a5ce60aea56e7bf8ec
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17559
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
We need to give the thread library some time to reap
the unregistered poller - it is a bit of a delayed
process. We have to wait for examine to finish on
the aio bdev, then the poll group gets destroyed and
the pollers unregistered. This marks the pollers as
UNREGISTERED, but they aren't actually reaped until
next time the thread is polled.
Fixes issue #2980.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1e32c50ea9b28ea2d5560ddc9b2f68fa81e708d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17575
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It'll allow for setting accel-specific options. For now, it makes the
size of iobuf caches configurable.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iaf505cc5e98dc6411453d9964250a4ba22267d79
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17188
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There's no default defined so it doesn't have to be available in the
env at all. Adjust the echo so we don't include an empty string.
Change-Id: Icaa75915544f9da1adcdcdeafce29f5ae97149ab
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17428
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Packaging tests will be done under a separate docker job, hence there
will be plenty of time to run them together. Keep DPDK-related builds
in nightly as they are quite sensitive to any changes (especially API
related), hence not very fit for per-patch testing.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ia1af5b0e86a503f540c32d2e030088d8a24f8847
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16046
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is to make sure we export all SPDK_* with proper values.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I2f01af1a051edcec6a75f99b25b765080abf2a5d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17212
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It's too verbose and may send confusing (in context of the actual
cleanup) messages.
Change-Id: I9e86e20afcf567fb54fec3a6cfb9008ad2080a12
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17485
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Even though these NICs are not used by Community CI,
all tests fail if to run on a system with
CX6 Dx, CX7, BF2 and BF3.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I23aaf8ddbc5b165f0a4372108d1f4b34f0b2ccf7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17166
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Common practice is to purge workspace on the jenkins side when the
job is done. When that happens, stuck processes may still linger,
but readlink -f will fail to resolve exe link as the target binary
won't exist anymore. Instead, just see what the link points at
and include it in the list.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I437a720e12e43e33fbf04345a6b77987167864fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17050
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SW PMD might process a crypto operation but failed
to submit it to a completions ring.
Such operation can't be retried if crypto operation
is inplace.
Handle such crypto op as a completed.
Verified by integrating rte openssl driver and
adding additional logs to check that SUCCESS
status received and completed as expected.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Ida161cec045167af752ebd5b57f41b2bbfe8b97c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16995
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is no access to fuzzer logs if `index.html` is in the same dir,
move covrage to `$output_dir/llvm/coverage`.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I139a6d780754aaf5b1333a2e5b0183bd24488bfa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16341
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Save crash files and other artifacts in `$output_dir/llvm/`
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I2ff82b414592cc492b79c9178b7257b2e87440b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15827
Reviewed-by: Michal Berger <michal.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: Iad129c1bc62116a93701a5f68c78351f01a4c878
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16249
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With corpus files persistent between fuzzer weekend run it may be
better to start all test for fraction of time instead of different
test every week.
Remove `poll_groups_mask` from config, this patch run every test on
single core and since then there is no need to specify another mask.
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I4448724801bdf1a3c496f829fd168b840c2efa67
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15384
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Make sure UUID is present for every bdev, even ephemeral ones.
Furthermore, this change removes assumption that bdev UUID
may remain empty.
Change-Id: I924c1ba9dedfe88a05044bb1073f28085735b1c1
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17106
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
`common.sh` - add common function to start fuzzers in
parallel and quick sequential run
add `get_testn` - get number of test to run in parallel
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I7c70b5221887c29b495a1632545877ca7cca0945
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16323
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
