These functions used to allocate resources
using calloc/spdk_zmalloc depending on the
g_nvme_hooks pointer. Later these functions
were refactored to always use spdk_zmalloc,
so they became simple wrappers of spdk_zmalloc
and spdk_free. There is no sense to use them,
call spdk memory API directly.
Signed-off-by: Aleksey Marchuk <alexeymar@nvidia.com>
Change-Id: I3b514b20e2128beb5d2397881d3de00111a8a3bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14429
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Following discussion in a recent SPDK community meeting,
it was determined that we no longer need to carry ISA-L as
a user configuration option. It will be enabled by default.
If running on an architecture that ISA-L isn't fully supported
on, the configure script will disable associated features and
display a warning and will also not build ISA-L. Same case if
there are issues with dependencies.
Note that --without-isal is no longer supported as a configure
option.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ibd1e5e9454d1b090462c3e757b2f51c52e6cb774
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14393
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The test uses bdev_crypto and NVMe/TCP devices to verify that volumes
with crypto parameters are correctly attached and any errors are handled
as intended.
It starts up two spdk_tgt processes, one is being orchestrated by SMA
and the other one acts as an NVMe-oF target. This ensures that we can
verify that SMA terminates discovery service connections whenever a
failure occurs during crypto setup.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I74001c256d4a05d2d8d295fb6fd8375d30ab66a1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I25cff079e021418ec66c6d04cfd5a3daf969ed77
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14154
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we use 5 seconds as a timeout inside rpc_cmd's
"while read" loop, which is enough for a system with
a single NVMe. That value is insufficient for machines
with more devices and causes the timeout, erroring out
the tests (verified with the same number of devices,
as in the CI node with the most NVMes available - 4).
For that reason increase the read timeout to 15 seconds.
Fixes#2641
Change-Id: If7e9fd169a75ea16ec243c63821a4e5d70995063
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Adding `psk` field to `spdk_nvme_ctrlr_opts`
Adding `psk` parameter to `bdev_nvme_attach_controller` RPC
Change-Id: Ie6f0d8b04ce472e6153934e985c026acded6cdfc
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14046
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add additional tests checking against dirty shutdown recovery. Also adds
'write after write' test - checking if two simultaneous writes to the
same LBAs return the same data before and after dirty shutdown.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Idcf9b51d9c00d0d065f7e9655387668f5eeb646d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13376
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Changing tests to using spdk_dd instead of using mounted nbd and dd on
it. Should be faster.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I17ffeae8441ba37d8e3348c715889fb568e8cd88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14425
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is done in order to have a bigger picture on the state of the
system (especially the phy nodes) when the autotest suite fails.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ib6e0b740b616284bda48ed82d92ac32236acaa3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There's no reason for this parameter to be non-const and it makes this
functions pain to use when you want to hardcode a specific sock
implementation.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifed4426a02ab54cbd51c8a2051b1eac010f86db9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14303
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change rpc_py to use rpc_cmd function.
The former needs to be defined explicitly in the scripts
that uses function, while the latter is a function
already available in autotest_common.sh.
Additionally delete unnecessary rpc_py declarations
and override rpc_cmd where additional arguments are
needed (like -s sock_name.sock).
Change-Id: I835f7eb308cd77658a2a425e153ab7ca460b5b61
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12872
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Memory leak for xnvme_dev_alloc is really a bug.
This has been fixed in its parent patch.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I9f131c0f8e3c8b8234965d9edf5afaf018ab3cfa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14224
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This commmit introduces a new bdev type backed up by DAOS DFS.
Design wise this bdev is a file named as the bdev itself in the DAOS POSIX
container that uses daos event queue per io channel.
Having an event queue per io channel is showing the best IO throughput.
The implementation uses the independent pool and container connections per
device's channel for the best IO throughput.
The semantic of usage is the same as any other bdev type.
To build SPDK with daos support, daos-devel package has to be installed.
The current supported DAOS version is v2.X, please see the installatoin and
setup guide here: https://docs.daos.io/v2.0/
$ ./configure --with-daos
To run it, the target machine should have daos_agent up and running, as
well as the pool and POSIX container ready to use, please see the
detailed requirements here: https://docs.daos.io/v2.0/admin/hardware/.
To export bdev over tcp:
$ ./nvmf_tgt &
$ ./scripts/rpc.py nvmf_create_transport -t TCP -u 2097152 -i 2097152
$ ./scripts/rpc.py bdev_daos_create daosdev0 <pool-label> <cont-label>
1048576 4096
$ ./scripts/rpc.py nvmf_create_subsystem nqn.2016-06.io.spdk1:cnode1 -a -s
SPDK00000000000001 -d SPDK_Virtual_Controller_1
$ ./scripts/rpc.py nvmf_subsystem_add_ns nqn.2016-06.io.spdk1:cnode1
daosdev0
$ ./scripts/rpc.py nvmf_subsystem_add_listener nqn.2016-06.io.spdk1:cnode1
-t tcp -a <IP> -s 4420
On the initiator side, make sure that `nvme-tcp` module is loaded then
connect drives, for instance:
$ nvme connect-all -t tcp -a 172.31.91.61 -s 4420
$ nvme list
Signed-off-by: Denis Barakhtanov <denis.barahtanov@croit.io>
Change-Id: I51945465122e0fb96de4326db742169419966806
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12260
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Compaction allows for writing to 100% of the exposed address space
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I0860730299249e4369fac33fdab5fbd7ff91c1da
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13339
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Changed vfio-user source branch for installing and testing.
Replaced vfio-user-dbfix branch with vfio-user-irqmask2 due
to the recent issue #2600.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ide525cdd3496c2a3dbecea4e44e6edff63438859
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13867
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Get a PD for the device from the PD pool managed by the RDMA provider
when creating a QP, and put the PD when destroying the PD.
By this change, PD is managed completely by the RDMA provider or the hooks.
nvme_rdma_ctrlr::pd was added long time ago but is not referenced
anywhere. Remove nvme_rdma_ctrlr::pd for cleanup and clarification.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: If8dc8ad011eed70149012128bd1b33f1a8b7b90b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13770
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This would allow for better control through the environment which
could be used by the CI.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Iaf94c82ccd7ce6851abb1ad4b7ebf76d686e3608
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13898
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Older compilers (e.g. 7.5 on ubuntu1804) are having issues under
v1.16 due to:
plugins/intel/intel-nvme.c:666:47: error: initializer element is not constant
static const int LATENCY_STATS_V4_BASE_VAL = (
Makefile:108: recipe for target 'plugins/intel/intel-nvme.o' failed
This was fixed by the following commit which is present in the v2.0
release:
e7309044f3
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I7ebcf1b1fdb44500a21bcf3feceb07a722e8fc30
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13775
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In case user sets --test-conf="" the pkgdep/git still forces
bpftrace installation under fedora35 and newer. Avoid this to
make sure user has a clear view on what's being installed (and
what not) in respect to defined cmdline arguments.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I8b60fe9044d1ab593b3c1acaf1b40dde22acee2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13607
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The test uses exisitng SPDK tests workflow for performing
series of tests for vfiouser subsystem on live QEMU instances.
For testing purposes it sends series of gRPC methods calls
that are serviced by the SMA and subsystems and then uses
the regular SPDK RPC interface to verify its effects on the application.
SSH connection to VM is used to verify that changes took place.
Signed-off-by: Milosz Linkiewicz <milosz.linkiewicz@intel.com>
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I38258c1a3f9ee3e457ef0426cdc6feff2f38d729
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11999
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This workaround is needed to be able to build refspdk under newer gcc
shipped with fedora36.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I1f6f8bbe5f64bd281536ff30761fb7cf4bd046fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13787
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This workaround is needed to be able to build refspdk under newer gcc
shipped with fedora36.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I5baeaae98db79649bbd96f9fbe5a6dcffdf5cfda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13786
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This attempts to fix builds under f35 where newer kernel requires
the https://review.spdk.io/gerrit/c/spdk/spdk/+/13404 patch to
be present in both the release and LTS build.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ie2a70ae9cb9ca6d2d495ea2cf5729fcffb60d593
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Suppress werrors when building nvme-cli as they are
redundant for SPDK in general
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I173eae198db5cfc26cbc6b75aa36b0aad8077a79
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12229
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Those lines are needed no more due to no 21.04 support
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ia53b04ce6953fed0fbb19779199382f63801380b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13498
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Disable werrors during QEMU compilation because
it doesn't matter for SPDK in general.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I55f68a585c3540192732883f42fae98f269e0022
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13645
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
This implementation of xNVMe BDEV module supports the char-device / ioctl-over-uring,
along with the "regular" io_uring, libaio, POSIX aio, emulated aio (via threadpools) etc.
Code changes done :
a. Addition of xNVMe submodule to SPDK
b. Modification of RPC scripts to Create / Delete xNVMe BDEVs
c. Implementation of xNVMe BDEV module
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: If814ca1c784124df429d283015a6570068b44f87
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11161
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This has been spotted while testing fedora36 builds
and fedora35 with the newest >=5.17.x kernels.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I012e293d2e6be65f9de80109f4e180ccbc1cd668
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12232
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This brings commit targeting fixes for the pu macros usage under
latest freebsd (13.x).
Also, group cherry-picks into cherry_picks() and apply them
together before the build starts.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Id49aa3d6eb065d8bb92f48402304c4f11f3c047f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13544
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Preparation for incoming patches in the series.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I46a9c68b89034793083f536b8d3b20f68ad1482e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13640
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add bpftrace and bcc installation from source for
Fedora35 and higher due to issues with the multipath
test and bpftrace/bcc installed from OS repository.
Fixes#2519
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ieedd544a8ac02d9071f0b76f6ddd7007f18f4570
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Remove QAT patches as they are no longer needed
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ibfbe2087aac9431b0b7c8e2addeef555e407bf40
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12994
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Update QAT driver to latest version to enable building
the driver on gcc 12 / Fedora 36. Yasm is needed for
build process.
Change-Id: Ib133f22d0ee2bea5a82b6e7b0bfe408fa1523ce1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12231
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Install sshpass package from third party repo
as it is missing from official epel main x86_64
repository for Centos8.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ide1899393eabb838bcb686c30dc58e4538f10c12
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12685
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: <qun.wan@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
The test uses `scripts/sma-client.py` to send a series of gRPC methods
that are serviced by the SMA then verify that new vhost device are
available on qemu guest os.
Change-Id: Ic4a1d56da59a636556fd6dfd4787fc613a4eb325
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12412
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The test checks that it's possible to attach remote volumes through
discovery service. The tests starts up three SPDK instances: one is being
managed by SMA, while the other two are acting as remote storage nodes.
The test verifies that volumes can be successfully discvered and
attached to a device and that the connections to the discovery
subsystems are refcounted correctly.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I3488b822880b99ef9cfd70e03de3ed9054c13901
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12414
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The test verifies that it's possible to register device managers from
out-of-tree plugins. The test defines two plugins, each defining two
device managers implementing the same two protocols and verifies that
it's possible to register different combinations.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2144b40db603fea95bf8b571777e6662b4de9bc7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11729
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
