There may be multiple C2H data pdus recevied.
So we should use the following steps:
1 Use the SPDK_NVME_TCP_C2H_DATA_FLAGS_LAST_PDU
to check whether it is a last pdu or not.
Then we will not cleanup tcp_req, i.e., tcp_req->datao
will not be cleaned.
Then use the SPDK_NVME_TCP_C2H_DATA_FLAGS_SUCCESS
to check whether the controller will use resp pdu
or not.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9dccf2579aadd18f31361444e25bd4b3b76f06c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9192
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch makes use of async_fini_start flag to
make fini_start asynchronous.
During this time all lvol stores which have no open
lvols are unloaded. This is required, since lvs
holds claim on the underlying bdev.
Fixes#1630
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If443cb087324d08a4a70df71c7afd930ab654f90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9095
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Callback for bdev modules is called 'module_fini',
meanwhile after its execution bdev modules were to call
'spdk_bdev_module_finish_done()'.
This function carries incorrect name, so it was deprecated
and replaced with 'spdk_bdev_module_fini_done()'.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9a12dff746ea8b4b1570a3794470f7b24e29003e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9148
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will be done in stages. This patch adds the
nvme_tcp_ctrlr_connect_qpair_poll function and and makes the icreq step
asynchronous. Later patches will expand it and make the
nvme_fabric_qpair_connect part asynchronous as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ief06f783049723131cc2469b15ad8300d51b6f32
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8599
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Just add a single .gitignore file in test/unit
that covers *_ut. That allows us to eliminate
100 .gitignore files in the test/unit directory
hierarchy.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia190587b4d5c6f1847471be27550cbfb843dc01e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9235
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We could not restore the setting of ana_reporting because it was not
included in the JSON config dump.
Add the parameter ana_reporting into JSON config dump by adding and
using a new helper function nvmf_subsystem_get_ana_reporting().
Besides, previously the JSON RPC nvmf_subsystem_get_listeners had
ana_state regardless of the value of ana_reporting. We make it
conditional in this patch. The JSON RPC nvmf_subsystem_get_listeners
had not been used in the test code in the repository. Hence this
change will be acceptable.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4e04600c969c254e0a816d3eb34983ee951091e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9111
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Once bdev finish starts, bdev unregister is called on all
unclaimed bdevs. This means that for lvs with at least one
lvol present, there will be a corresponding bdev unregister.
Yet the vbdev_lvol module does not attempt to unload the lvs,
once last lvol from that lvs is unregistered. Leaving
the base bdev for lvs claimed.
This patch fixes that by using fini_start callback from
bdev_module to mark when shutdown begins. After that
last lvol unregistered on lvs will unload it.
Expanded struct lvol_bdev to contain lvol_store_bdev.
Closing the lvol will free spdk_lvol, so lvol->lvol_store cannot
be accessed.
Changed ut_lvol_destroy UT to ut_bdev_finish. Previous UT didn't
really test vbdev_lvol_destroy, but 'hotremove' of the lvol bdev.
In effect there is no hotremove of the lvol bdevs (only lvs bdev).
spdk_bdev_unregister() can only be called from within vbdev_lvol,
or during bdev module finish.
This UT will now check the bdev module finish.
Note that at this point lvs with no lvols will not trigger
lvs unload. Next patches in series will introduce async fini_start,
to allow for the unload.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8f51e8c1fcfdc55a5d090a3bc84ccefda813aef8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9093
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Instead of calling vbdev_lvol_unregister() hooked up
to the destruct callback, use spdk_bdev_unregister()
directly.
The spdk_bdev_unregister() is always asynchronous
and callbacks are delayed until spdk_bdev_destruct_done().
This is now corrected in the stubs.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I50683c71be80b1baa8bf3b39a05ca631ac527c2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9155
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The new API is used if bdev ext_opts is not NULL.
Change-Id: I414b5d19bff54114d6708efed89ba19b5955f56a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
These functions accept extendable structure with IO request options.
The options structure contains a memory domain that can be used to
translate or fetch data, metadata pointer and end-to-end data
protection parameters
Change-Id: I65bfba279904e77539348520c3dfac7aadbe80d9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Add a global list of memory domains with reference counter.
Memory domains are used by NVME RDMA qpairs.
Also refactor ibv_resize_cq in nvme_rdma_ut.c to stub
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie58b7e99fcb2c57c967f5dee0417e74845d9e2d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8127
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Memory domain is used to describe memory which belongs to
another address space (e.g. GPU memory or host memory)
Memory domain can be configured with callbacks to translate
data to another memory domain and to fetch data to
local buffers.
Memory domains will be used in extended
bdev/nvme API added in the following patches.
Change-Id: I0dcc7108a4fbf416a11575aa5cf5d7ec501b3d8b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8126
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
If a qpair is part of a poll group and it's not configured in the async
mode, it should be using poll group's process_completions variant.
Additionally, connecting qpairs to the poll group was moved up, so that
qpairs are already on the connected qpairs queue when waiting for the
connection to complete.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I08f75bd61a566d1ab60029b6202d9337df75733f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9074
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Replaced poll cycle count with a timeout when destroying a qpair that is
part of a poll group. Tracking the time instead of a poll count is more
stable, as the number of poll cycles can vary based on the application's
behavior when destroying a qpair.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7445bc1b411f2905aab7bf3dc7b2d3344712e1eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9200
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Number of active namespaces may change. So, on ANA log page update we
should check if buffer has to be resized.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I1720317ea7f59e5afef73d5c4bd1cd69a7dd6520
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Log page reading function 'spdk_nvme_ctrlr_cmd_get_log_page' does read
into intermediate buffer and then copy to user provided buffer. So,
there is no need for user buffer to allow DMA.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I7337afa99c3ae666cc43ea2a48317de875334cfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9177
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
async_mode option is currently supported in PCIe transport layer
to create io qpair asynchronously. User polls the io_qpair for
completions, after create cq and sq completes in order, pqpair
is set to READY state. I/O submitted before the qpair is ready
is queued internally. Currently other transports only support
synchronous io qpair creation.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib2f9043872bd5602274e2508cf1fe9ff4211cabb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8911
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_reactor_set_interrupt_mode() writes/reads from fds created during
reactor_interrupt_init(). Since spdk_fd_group_create() depends
on eventfd, this will not work for systems that do not have it.
reactor_interrupt_init() handled lack of support for eventfd correctly,
while spdk_reactor_set_interrupt_mode() did not check for it.
Reported-by: Nick Connolly <nick.connolly@mayadata.io>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5181d436636c55cca3a06b1947e944502a9204ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9131
Reviewed-by: Nick Connolly <nick.connolly@mayadata.io>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The current num_md_clusters doesn't include the the part before
md_start. So the bs_recover will get more num_free_clusters than it
should be. This patch can fix it.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I911926beb69aca677da508ba71f292496c917e7f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9034
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The generic transport layer still does a busy wait, but at least
the logic in the PCIe transport now creates the queue pair
asynchronously.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Change-Id: I9669ccb81a90ee0a36d3f5512bc49c503923b293
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8910
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Patch below broke the UT due to not accouting for changes
in nvme_cuse since original submission:
(19f0bfd) test/nvme_cuse: cases for stop cuse
The change was introduced with:
(d651f8a) nvme/nvme_cuse: Fix race condition in cuse session
Now when initalizing nvme_cuse controller it uses is_started,
to avoid race condition.
The UT was missing this part of nvme_cuse controller initalization.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I46344977204c3383d8f400c80bc7df50e6d7581d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9001
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using `bs_allocate_and_copy_cluster()` instead of a zero-length write
makes it possible to inflate/decouple snapshots, as the writes would
fail with -EPERM, because the snapshots are marked as read-only.
Additionally, zero-length non-vector requests are now completed
immediately. It makes it consistent with the vector path (which already
does that) and allows us to use the zero-length reads as a context for
cluster copy.
Fixes#2028.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib7fdee352972ecf808833aa179820d85cfab7eed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8918
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Implemented nvmf code to allow transports to use ZCOPY. Note ZCOPY
has to be enabled within the individual transport layer
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I273b3d4ab44d882c916ac39e821505e1f4211ded
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In bdev_nvme_reset_ctrlr(), get a controller reset context and start
a poller that calls spdk_nvme_ctrlr_reset_poll_async() to perform the
controller reset asynchronously.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I1e3ae42291c3b43b69c99ca56997dc1965c3ac59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In rte_power all that enabling/disabling turbo does is allows
for additional entry in frequency array for particular core.
Instead of exposing this API through spdk governor,
just make sure that dpdk_governor enables turbo by default.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I994b326a57c01889bccea26635753c56637259d2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Those calls went unused, in favor or much more useful
up/down/min/max variants.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I432896196a1a6edfc6799c8658df49567f73d457
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8788
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove _spdk_scheduler_disable() to avoid confusion as there is
no spdk_scheduler_enable function. Since spdk_scheduler_disable
sets scheduler period to 0, use spdk_scheduler_period_set(0) instead.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4f1390a635f80e8b92775aa4be2e37f5b95467f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7448
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
There is only one g_scheduling_reactor (main core), the is_scheduling
flag for it is used to block starting new gather_metrics before
previous one is finished.
Meanwhile is_scheduling flag on other reactors was used to block
destroying lw_threads while scheduling happens. It was only needed
because scheduler interacted with the same lw_thread pointers as
each reactor. Previous patch removed this dependency, instead
spdk_thread ids is used. If an spdk_thread is destroyed,
while scheduling _threads_reschedule_thread() handles it.
It is no longer required to block destruction of lw_threads
based on this flag.
Instead of using the main core reactor flag, a g_scheduling_in_progress
is introduced.
Removed _spdk_get_scheduling_reactor() and instead shared the value
of g_scheduling_in_progress between reactor.c and app.c.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ica57326a552477add522174cc3e96b3bab918350
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8732
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Functions that set reactor interrupt mode were not tested
since _spdk_get_app_thread() always returned NULL and
implementation did not verify the RC.
This patch will return a thread from scheduling reactor
as the app thread. Which is not exact, but otherwise
a new app thread would have to be added to each UT.
spdk_reactor_set_interrupt_mode() requires the completion to
be executed on app_thread. Added the poll of that thread
to make sure it gets drained.
Since now the UT actually executes the code path,
additional 4 events will be processed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0793e6dcc41c447dc11ed8ab28eb9041c5d82628
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8409
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Scheduler and governor tests polled events till completion,
but depended on exact number of events and repeated those
calls multiple times.
This patch adds _run_events_till_completion() which will
run all events scheduled, until there are no more to process.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iab3af2e031510b095ddfcc93d2320bbdc7d84aeb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8408
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fixes#1933
When decoupling parent the updated parent_id was
not persisted to the blob if it was a snapshot.
Due to having md_ro set to true, blob_set_xattr()
failed.
Later on the incorrect parent_id could cause troubles
like in the github issue, when deleting that snapshot.
This patch adds return code check for blob_set_xattr
and forces md_ro to false during blob md sync.
Since some of code paths are shared between decouple,
inflate and clone operations, the final callback for them
is doing revert of the original md_ro.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If017455f72e4d809fe533d9f986e5ae6bb8e2035
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The specification says:
"A host may replace its reservation key without regard to its registration
status or current reservation key value by setting the Ignore Existing Key
(IEKEY) bit to '1' in the Reservation Register command."
So for this case we treat it as a new registrant, also add UT to cover
the added cases.
Change-Id: I5990f15da36706063a35565d110ed4c6eb30a3f3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
