It is perfectly valid for a bdev to not support the
unmap command - there's no need to print an ERRLOG
when a SCSI INQUIRY 0xB2 (LOGICAL BLOCK PROVISIONING)
command is sent to query if the LUN supports it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I18389df4d55a1ac186707d624ddea292a5470e80
Reviewed-on: https://review.gerrithub.io/c/442104
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Technically this check is correct, but the Linux kernel
target doesn't have it, and older versions of libiscsi
have a bug which result in stale ExpStatSN getting sent
resulting in terminated connections with the SPDK iSCSI
target at high queue depths.
Fixes#600.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I76eaf9dee2d733bfa3f8d43b86528de6b556cbd6
Reviewed-on: https://review.gerrithub.io/c/441981
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Those cases should never occur. Klocwork pointed out
possible dereference based on the returns later in
the functions.
Change-Id: I282a56f3f415f85c38e9c451cbb10bc80fc6176b
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This gives us more realistic control over the number of requests we can
submit.
Change-Id: Ie717912685eaa56905c32d143c7887b636c1a9e9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441606
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rw_depth was a misinterpretation of the spec. It is based on the value
of max_qp_rd_atom which only governs the number of read and atomic
operations. However, we were using rw_depth to block both read and write
operations which is an unnecessary restriction. write operations should
only be governed by the number of Work Requests posted to the send
queue. We currently guarantee that we will never overshoot the queue
depth for Work requests since they are embedded in the requests and
limited to a size of max_queue_depth.
Change-Id: Ib945ade4ef9a63420afce5af7e4852932345a460
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441165
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be necessary later on when we need to throttle send and recv
requests in software.
Change-Id: Ifb25eaabd15e101fbfc2959a08a321f80857b280
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Both initiator and target are using the minium 10 seconds
timeout value, so set it in kas field when initializing
the controller.
Change-Id: Idda68bdfe27613ebaf706a0de497145d3f9ed766
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441995
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently, the code does not comply with the spec,
so remove such code for 19.01 and will add the code
which complies with the spec for 19.04
Change-Id: Icd3b2573fbc46dc2fa7a00c6672c23ea01ffe0ee
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/441985
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Although Vhost SCSI code is technically capable
of polling different sessions on different lcores,
the underlying SCSI API won't allow allocating
io_channels on more than one lcore.
That's why we will now let device backends assign
lcores by themselves.
The first Vhost SCSI session will now choose one
core from the available ones, and any subsequent
sessions will stick to the same one.
Change-Id: I616cd195a919960dff68508473cea236abf8d6a3
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441581
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If there is socket read error, we should directly disconnect
the socket instead of set the tqpair into RECV_ERROR state.
When it is in ERROR_RECV state, it does not mean that
we should close the socket immediately.
Change-Id: I975906653c13eb3fa5195799c517015435176785
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/441830
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Bump the log level for EAL to RTE_LOG_NOTICE.
Reading from rte_log.h:
```
RTE_LOG_NOTICE 6U /**< Normal but significant condition. */
RTE_LOG_INFO 7U /**< Informational. */
RTE_LOG_DEBUG 8U /**< Debug-level messages. */
```
We're doing this primarily for the NVMe hotplug poller,
which calls spdk_pci_enumerate() and constantly bloats
the output with logs describing which device is currently
iterated over. We don't want to see those.
Change-Id: I1a90e514fdf467bc95da910f786f1818757cfdcf
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441789
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In patch fbec702944 (bdev/crypto: Set QAT alignment
requirement) we added an alignment requirement for I/O
buffers, but the internally-allocated buffers for
encryption haven't respected it.
We now allocate those buffers with the crypto bdev's
required alignment. It is only required for QAT and we
do it unconditionally, but we don't want to strcmp the
driver name in the hot I/O path just for that - the
code is to be refactored anyway.
Change-Id: I2cbc04408ddc5574f212b63536a05eb73ceba104
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441908
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Assigned CQ size when creating CQ may run over due to
heavy workload with too many qpairs. Enlarge it dynamically
can prevent IBV_EVENT_CQ_ERR caused by CQ's runover.
This patch fixes issue #498:
https://github.com/spdk/spdk/issues/498
Change-Id: I6c2d7194d4147d812d49d4fe787fcba5c6bbede9
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440853
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This change was provided by GitHub user vikasbrcm to fix issue 562.
I am uploading his change to facilitate testing of the issues and
possibly get it merged before the 19.01 window closes.
Change-Id: I58fb1058f68c6c02006ceed6e577be627e6dbc09
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441611
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds FTL bdev. RPC scripts have been updated to allow for
creation and removal of FTL bdevs.
Change-Id: I82a5c5033b65bbeb67c238cae969a68cff767dcc
Signed-off-by: Jakub Radtke <jakub.radtke@intel.com>
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431329
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With all the patches in place, we can finally
enable having more than one simultaneous sessions
to a single vhost device.
This patch adds a unique id to the session structure,
similar to the one in a vhost device and also fills in
the implementation holes in foreach_session().
Vhost-NVMe can support only one session per device
and now has an additional check that prevents it from
starting more than one at a time.
Vhost-SCSI also has the same check now since it needs
additional work on the lcore assignment policy. The
check will be removed once the required work is done.
Change-Id: I13a32c7a0eae808e9bec63a7b8c15ec0bc2e36ed
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Particular backends will now be responsible for sending
events to vsession->lcore. This was previously done by
the generic vhost layer, but since some backends will
need different lcore assignment policies soon, we need
to give them more power now.
Change-Id: I72cbbccb9d5a5b2358acca6d4b6bb882131937af
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441580
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
It's sessions that are tied with the lcores now.
This makes the vhost devices accessible by any
thread that only locks the global vhost mutex.
The mechanism used for external device events was
refactored to serve for foreach_session() API.
Additionally, since we don't want to handle cases
where the entire vhost device gets removed while
an asynchronous foreach_session chain is pending,
a new per-vdev counter of pending async operations
was added. We'll fail the device removal request
if there are any pending operations. Eventually
we would like the device removal to be asynchronous,
but that's a todo for later.
The external events are still there, although
they only lock the mutex and call the provided
function now.
Change-Id: I20618f9420a9bc04270373469deaad8fb2049c7c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439323
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds RPC calls for histograms in bdev layer.
Following calls are added:
- enable_bdev_histogram - enable/disable histogram structures for specified bdev and each of its channels.
- get_bdev_histogram - merges histograms from all channnels and encodes histogram as base64
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ib423a919dc1cde7dd7d92247db5482cfb9d66956
Reviewed-on: https://review.gerrithub.io/c/433573
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The controller shall treat a Keep Alive Timeout in the same manner
as connection loss. If the Keep Alive feature is in use and the
timer expires, then the controller shall:
1, stop processing commands and set the Controller Fatal Status
(CSTS,CFS) bit to '1';
2, terminate the NVMe Transport connection;
3, break the host to controller association;
A timer poller is added to each subsystem to monitor timeout event.
Change-Id: I001afab8a6764f30c39df37fa96384180d117486
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Each Vhost SCSI session will now keep its local
SCSI targets state that can be accessed without the
global vhost mutex.
Hotplug will still add the SCSI target reference to
the device struct, but will also asynchronously tell
each active session to add it's session-local copy.
Hotremove, on the other hand, will now try to
asynchronously remove a SCSI target from all sessions
first and only afterwards it will remove it from the
device struct.
This allows us to safely hotplug and hotremove SCSI
targets into Vhost SCSI devices that have multiple
active sessions.
Each session will still use its management poller to
try to locally remove those targets that were scheduled
for hotremoval and the additional
spdk_vhost_dev_foreach_session() will now also try to
remove each one of them from the entire Vhost SCSI
device after making sure they were already removed from
all sessions.
Change-Id: Idd080b618768c71cd1cd564efeaf930bf79fb578
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439321
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Before we implement the support for multiple sessions
per device, we still need to make a few intermediate
changes that will require a counter of currently polled
sessions. So here it is.
Change-Id: I0a1d928eafa75efa1b5c2e6670a5ceb282c87fa4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441734
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fix case when remote is doing SHUT_WR but we still have requests in
progress. In this case we should finish requests, send response and then
close the connection.
Fixes#604
Change-Id: I009029c95e0557c7347a78c3a50d35b30fc8141e
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441718
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Some users require to do write zeroes operation when
erasing data on lvol. Currently the default method is
unmap. This patch adds flag to spdk_rpc_construct_lvol_bdev
call that changes default erase method. This is also a base
implementation for possible future function for erasing
data on lvol bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8964f170b13c2268fe3c18104f7956c32be96040
Reviewed-on: https://review.gerrithub.io/c/441527
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The backend struct will get some new dependencies
soon, so move its definition further in a header
file.
Change-Id: I39c25027312777c7e570b12511dc9c5e9b9023d4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439322
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Returning negative value from a `foreach` callback
will now break the entire chain. This is required
for refactoring spdk_vhost_dev_foreach_session() to
use the same mechanism as external events. Before
we actually do the refactor, we add the only feature
that external events were missing.
Change-Id: I70bda3df99748de51429e329a056c37a3bc7e348
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439444
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This patch implements unit tests for the following modules:
* band
* PPA (Physical Page Address) translations
* write buffer
Change-Id: Ia7292bd3027347e8a3da77dafe71cde2c016bf38
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431328
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds the RPC support for the Read/Write separate
bandwidth limit controls. The basic usage as following:
usage:
rpc.py set_bdev_qos_limit [-h] [--rw_ios_per_sec RW_IOS_PER_SEC]
[--rw_mbytes_per_sec RW_MBYTES_PER_SEC]
[--r_mbytes_per_sec R_MBYTES_PER_SEC]
[--w_mbytes_per_sec W_MBYTES_PER_SEC]
name
positional arguments:
name Blockdev name to set QoS. Example: Malloc0
optional arguments:
-h, --help show this help message and exit
--rw_ios_per_sec RW_IOS_PER_SEC
R/W IOs per second limit (>=10000, example: 20000).
0 means unlimited.
--rw_mbytes_per_sec RW_MBYTES_PER_SEC
R/W megabytes per second limit (>=10, example: 100).
0 means unlimited.
--r_mbytes_per_sec R_MBYTES_PER_SEC
Read megabytes per second limit (>=10, example: 100).
0 means unlimited.
--w_mbytes_per_sec W_MBYTES_PER_SEC
Write megabytes per second limit (>=10, example: 100).
0 means unlimited.
Change-Id: I822ec4814d21adff9826ce03a6af3783b1b98f44
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/417650
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds the support of read and write separate
bandwidth rate limits control with the configuration file.
Below is the example (in MiB) for the configuration section:
[QoS]
Limit_Read_BPS Malloc0 100
Limit_Write_BPS Nvme0n1 200
Change-Id: I0221516ce70c3fbb07b9e80c1c814ed5ba271c88
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/416672
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We know how big this should be so no need to dynamically allocate it.
Change-Id: I00ae6cb7c7f525d946d213e0f58cc5fe05bcf932
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441128
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Everything need to be removed to get the remove callback called.
Otherwise we will end up with dangling devices and user callbacks
possibly not called.
Fixes#567
Change-Id: I37259f6cd97268060170a6b17a0c0df4d543a224
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440890
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If IO fail e.g. during hotremove error shouldn't be ignored as this will
trigger operations (like crc checking) that shouldn't be done. Also
false error messages are printed.
Change-Id: Ie023ddcd9bdba2378e69808302ff9978497c7852
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440889
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In SPDK sock_ut, the port 3260 is tested. It is conflict with the SCSI
Target Daemon (tgtd). If the service is enabled, it makes sock_ut failure.
Suite: sock
Test: posix_sock .../home/ubuntu/spdk/lib/sock/posix/posix.c: 238:spdk_posix_sock_create: *ERROR*: bind() failed errno = 98
FAILED
The patch changes port 3260 to UT_PORT, and enhance the error log when
socket bind is failed.
Also enhance error log carrying port value in posix.c.
Change-Id: I31e47af49335cdf7eaffa44237860ebc140d2419
Signed-off-by: tone.zhang <tone.zhang@arm.com>
Reviewed-on: https://review.gerrithub.io/c/439983
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Partially decoded request need to be free even if
spdk_json_decode_object() fails.
Change-Id: Icd00f835537dbaf197cc4f05930be8c543a534a6
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This wasn't allowed at first to make debugging these
thread changes easier. Now they're mostly solid, so
let's allow this behavior.
Change-Id: Ida689c738ed550ec46c3cb6cab6788a651c6088b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441159
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch will solve the following two cases:
1 Free the pdu resources. Add the checkout of c2h_pdu_data_cnt of the qpair.
2 Do not recyecle the req accoriding to the pdu in the send_queue, but directly
recylcing the reqs in TCP_REQUEST_STATE_TRANSFERRING_CONTROLLER_TO_HOST state.
Change-Id: I5856c3421019ec49d576d3dae4c62fefbb3925ca
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/440847
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Fix potential bug. In _spdk_nvmf_subsystem_add_ctrlr(), befor free(
ctrlr) we should free ctrlr->qpair_mask. Because we set qpair->ctrlr
= NULL, when destroy qpair the qpair_mask is not released. For the same
reason, req->qpair->ctlr = ctrlr is placed at the bottom of the function.
Change-Id: I38e268b532ff3ce87721c02f15ac4f674856d103
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440858
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This change is related to enabling multi-sgl element support in
the NVMe-oF target.
For single SGL use cases, there is a 1:1 relationship between
rdma_requests and ibv_wrs used to transfer the data associated with
the request. In the ingle SGL case that ibv_wr is embedded inside of
the spdk_nvmf_rdma_request structure as part of an rdma_request_data
structure.
However, with Multi-SGL element support, we require multiple
ibv_wrs per rdma_request. Insted of embedding these
structures inside of the rdma_request and bloating up that object, I
opted to leave the first one embedded in the object and create a pool
that requests can pull from in the Multi-SGL path.
By leaving the first request_data object embedded in the rdma_request
structure, we avoid adding the latency of requesting a mempool object
in the basic cases.
Change-Id: I7282242f1e34a32eb59b55f326a6c331d455625e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/428561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Purpose: To avoid the buffer contention among different
polling groups if there are multiple core configurations
for NVMe-oF tcp transport.
Change-Id: I1c1b0126f3aad28f339ec8bf9355282e08cfa8db
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/440444
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added set_read_only_lvol_bdev() RPC that marks
lvol bdev as read only.
This enables to create clones off of a base lvol,
without having to create additional lvol bdev with snapshot.
Change-Id: Ic20bbcd8fbebcef157acce44bfa1da035b0da459
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds supplementary tracing for OCSSD library to allow
for more efficient debugging and profiling of the user I/O path
as well as the background tasks (maintaining write pointer,
defragmentation, ANM event handling, etc.).
Change-Id: I741f1304f4ee0eba019e31bea7814af475c3296e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431327
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The purpose this patch is to fix the following issue:
https://github.com/spdk/spdk/issues/568.
The root cause of issue is in nvme_rdma_fail_qpair
since we want to recycle all outstanding rdma_reqs.
There is an aer req, the callback of which is:
nvme_ctrlr_async_event_cb. In this function, we
will call nvme_ctrlr_construct_and_submit_aer again,
however the nvme controller is already in shutdown state.
(The ctrlr->vcprop.cc.bits.en is set to 0).
Change-Id: I422f0fe5faf472e9a1cb6bbd174e806e6405b95c
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to remove the requirement to install intel-ipsec-mb to
system directories.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I579655a98b515cf148b7cd17823a9bb541ea6ad7
Reviewed-on: https://review.gerrithub.io/c/440785
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It was possible to leak pollers if we had multiple devices in the
transport. The new err_exit path fixes this.
Change-Id: Iafd5643c67fae741113f10afe761af1988cb6a9b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439419
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is implemented at a generic level.
Change-Id: Ibf8167e828f8da27cc26cd04e611c3f3c084319a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440418
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows for proper exit when error was encountered
during scsi port create.
Change-Id: Ie46faf7e515823cdc7383c25c4482bd2855b6368
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440676
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For the backend block device which can support flush command,
vhost-blk should report such feature to Guest, and leave such
decision to Guest.
Change-Id: I6cd6fd94ed80256ffe268bc1bf2c1dd57a164825
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439605
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
In an event where spdk_reactors_init() fails the
error message which was getting printed was not
useful. This patch improves error message printed.
Change-Id: If1e8dea20d187d68414782fa59943f0f7963a471
Signed-off-by: Arshad Hussain <arshad.super@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/441145
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Need to check user input and return status of parsing
to prevent app or target from crashing.
Input checking function will be added in the future.
Change-Id: I8167ac13306ae4f81e2cacb80edd9dcf9382c374
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
For QAT, a single operation can be described at most by one IOV.
To assure that we don't get memory buffers that are sub-block sized,
set the alignment requirement to the block size of the underlying device.
Change-Id: I4071bb89e696fc40e010798bd76520e5fb765217
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440988
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch is used to dump the requests state if
the tqpair's resource is not freed.
Change-Id: Ic4780662558d73267d4f1ebabfc22780fafec4ec
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440846
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
RDMA transport will report SPDK_NVME_SC_ABORTED_POWER_LOSS code
when fail the admin queue, however, SPDK_NVME_SC_ABORTED_SQ_DELETION
makes more sense here, because we know we are going to shutdown
the controller.
Fix issue #568.
Change-Id: I31da095ec92c06079511d89cc2743654ba2c001b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440132
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds the ability to restore the state of the block device
from the SSD, by reading the metadata stored in each band and recover
the L2P (LBA -> PPA map). Only clean shutdown is supported as of yet.
Change-Id: I03e39510a902b098c52edfaedd2e61b43a297bda
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is shared between all currently valid transports. Just move it up
to the generic structure. This will make implementing more shared
features on top of this a lot easier.
Change-Id: Ia896edcb7555903ba97adf862bc8d44228df2d36
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch added two new function pointers (queue_io,
update_io) for related qos operations like iops and
bandwidth rate limits.
Change-Id: I2ffd67c5f1c421eab448fd5e95f809da55805fcd
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
SPDK NVMe driver and NVMe CLI define the parameter about DIF location as
follows:
If set to 1 and DIF is enabled, then DIF is transferred as the first 8
bytes of metadata. If set to 0 and DIF is enabled, then DIF is transferred
as the last 8 bytes of metadata. Defaults to 0.
This patch fixes the apparent inconsistency.
Change-Id: I481332bb9a6caa488664dbd1fe6039270b9f9663
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/440672
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This name more closely resembles pthread_exit, which is a
closer analogy to how the new threading library works.
Change-Id: I68b04509f3ff8e94b8688804a7e5661155a3ecd1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440597
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This mirrors pthread_create, which works more closely
to the new style where SPDK libraries can spawn their
own threads.
Change-Id: Ic524c4c35bcf7c1611e4f261ebb64b98ac5a5a1b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440596
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Instead of implicitly grabbing the thread from the thread
local variable, make it explicit.
Change-Id: I733fad06181439e12b1e71a4829b84e7b64e2468
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440595
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Nothing implements the callback just yet, but it will be used for
dynamic thread creation.
Change-Id: I088f2bc40e1405cd5b9973b9110608f49c8abd68
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The user can now spawn SPDK threads within the context of another
SPDK thread, opening up the possibility of spawning threads from
within SPDK libraries.
Change-Id: I308eebc3f1d6f51da7236621ef2f67817f04ce8b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440760
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
These are no longer used by anything.
Change-Id: I0db6bc88e4dc945ff4f64df2ac410e1d00a669c1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
During destructing a connection, if timeout of logout timer for the
connection occurs, spdk_iscsi_conn_destruct() will be called again
to the connection.
Segmentation fault by multiple calls of spdk_iscsi_conn_destruct()
have been observed when exiting one of the sesssions during IO tests
for multiple sessions.
Fix#574
Change-Id: I69873905486953bfb0cdb43b000b8e38ff9346ac
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/440466
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Both the scsi device and its state will need an
additional per-session copy, so we put those two
in a single struct now.
This also serves as a cleanup.
Change-Id: I01bc11db4070e9f258de15e6c44b6f4fcd1d51f2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439320
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prepared APIs to operate on a session parameter rather
than a device parameter. Some of those functions are
now ready to support more than one session per device.
Change-Id: Ie4a49cd1d1f8ee1b826952bc87e66aa0cabdd925
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Vhost SCSI session specific fields were moved from the
device struct into a new session struct. This is the
same change as Vhost Block had.
Most of the functions inside vhost scsi still accept
vhost device as a parameter and then get the session
object internally. Those functions will be refactored
to accept session object directly in a separate patch
since the amount of changes required is too big to be
done here.
Change-Id: I8b87ba1187413d471b463aa7067821928ac0303e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439318
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following the same change with SCSI target hotremove,
we'll now allow hotremoving an underlying bdev without
VIRTIO_SCSI_F_HOTPLUG negotiated. The hotremoval will
be still reported through SCSI sense codes.
Change-Id: I5b3dd09bd72456eda745f4225f76603fad999da6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439317
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Failing the hotremove request will become more tricky once
we allow creating multiple sessions per device, so we try
to get rid of any unnecessary error checks.
VIRTIO_SCSI_F_HOTPLUG tells us just if the host is capable
of receiving hotplug events, but the scsi target can be
hotremoved even without them. The hotremoval will be still
reported through SCSI sense codes. All I/O to a hotremoved
target will be failed with sense key ILLEGAL REQUEST,
asc 0x25, ascq 0x00 (LOGICAL UNIT NOT SUPPORTED).
Change-Id: I2be4e0167eb06804112758a5825cd91745128408
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439316
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In function spdk_fs_file_stat_async, the
stat.size = f->append_pos >= f->length ? f->append_pos : f->length;
but in spdk_file_get_length, we return f->length.
So generally, it should all use the same method to return the file
length, and this patch will fix this issue.
Change-Id: Idb9aa9e737711fcd48ac0075c7f7ffed825fe3b0
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/439627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This supports 4KiB required alignment in bdevs such as
AIO and some variants of the crypto bdev.
Change-Id: Ib6ab2e8b07fbbcc5fe3f76e41e9d3c5a7ae3fb4d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440767
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Let the application figure out how to close the
underlying block device after an init fails or
an initialized/loaded volume is closed/destroyed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id0b9b99c85ed13166ec9a229eaaa0b0eb04289fd
Reviewed-on: https://review.gerrithub.io/c/440573
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will remove the metadata from the associated backing
device and delete the pm_file associated with the reduce
volume.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I30ffd68e5ba69b31ee1be85418c5b8c592d82e70
Reviewed-on: https://review.gerrithub.io/c/437995
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This requires fixing up the unit test pmem emulation
code - we need to copy the 'persistent' buffer into
the newly 'mmaped' buffer in the pmem_map_file stub.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4e474f437922e652a57d0b45b6ef92fc713eb587
Reviewed-on: https://review.gerrithub.io/c/437888
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Implement spdk_crc32c_update() with ARM CRC32 intrinsics.
Change-Id: I1daf7f21012aab02290f88a65bbae619eedf5087
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.gerrithub.io/c/437218
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch series is geared at solving github issue 555.
Ultimately the goal of this series is to add a per-poll-group buffer
cache to prevent starvation.
Change-Id: I8ddaa47487665c2f9adce2109eb71b8fa71a7927
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This lets us remove the assumption of having only
a single session per device and brings us closer
towards supporting more.
Change-Id: Ibbb7b1ed789ff0690e62c00fb5ed39ce64245028
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438680
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Different Vhost Block sessions could be technically
polled on different threads, so we move the io_channel
from the device struct into the session struct.
Change-Id: I004cad8b6dc6d198844fca3bb11724e3f176dc9d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439315
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Prepared APIs to operate on a session parameter rather
than a device parameter. Some of those functions are
now ready to support more than one session per device.
Change-Id: Id55e70ae521039f5acc47e80ab8b0aa043679d95
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438679
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
With all the core vhost changes in place, we can refactor
the upper layers now. We start with the vhost block since
it's the easiest one.
Vhost Block session specific fields were moved from the
device struct into a new session struct. What's tricky,
is that the blk-specific struct directly contains the
generic session struct. This gives us handy access to
the generic session data from the blk-specific session,
and also allows us to directly upcast generic session
objects.
Most of the functions inside vhost block still accept
vhost device as a parameter and then get the session
object internally. Those functions will be refactored
to accept session object directly in a separate patch
since the amount of changes required is too big to be
done here.
Because of the above, some parts of this patch might
seem overcomplicated. Especially the to_blk_session()
funtion, which checks the device backend inside. The
ultimate goal is to receive session object through
start/stop callbacks - and for that the backend check
does make sense.
Change-Id: If222c31aec16a8cbe2d0cfb98c828e1ac75b91fc
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
kill a spdk process with aio bdev storage many times will get error messages:
bdev_aio.c: 244:bdev_aio_group_poll: *ERROR*: epoll_wait error(9): Bad file descriptor on ch=0x152a7f0
vhost.c:1010:_spdk_vhost_event_send: *ERROR*: Timeout waiting for event: stop device.
When spdk process exits, the connfd is closed by rte_vhost_driver_unregister, then
other function such as epoll_create1 in aio bdev may allocate the same fd,
but this fd is closed by vhost_user_read_cb again, so epoll_wait return -1
Signed-off-by: Honghui Wang <wanghonghui@ucloud.cn>
Change-Id: Ic3fd938892f004c18fb38d4594c006c40a01efaa
Reviewed-on: https://review.gerrithub.io/c/439851
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: Changpeng Liu <changpeng.liu@intel.com>
Sessions are allocated internally by the core vhost
library whenever DPDK accepts a new connection, so
the only reasonable way to store additional per-sesion
data is to tell the core vhost library how much extra
memory it needs to allocate. Hence, we add a new field
to the vhost device backend struct.
Change-Id: Id6c8285505b2e610e28e5d985aceb271ed232555
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437778
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Instead of calculating those settings once and storing
them in the device struct, we'll now recalculate them
whenever a device session is created. This lets us
remove 2 fields from the device struct.
Change-Id: I2cb2bdbc570a41ae78c0666490fb1462a00d0b6f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This is an attempt to clean up requests sititng in the
waiting_for_buffer state before destroying it for good.
Change-Id: I8ae047e4d7fd01f30419ae346e4da49355dc033d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440127
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This allows us to drain all of the pending requests from the qpairs
before we destroy them, preventing them from being picked up on
subsequent process_pending polls.
Change-Id: I149deff437b4c1764fabf542cdd25dd067a8713a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440428
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Necessary to avoid erroring out in the edge case where we have an SGL
request sent with two buffers that fit in the incapsule data size.
Change-Id: If51fb69c402482b564c737319584378cb03e7213
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/436062
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Due to qpair timeout handling refactoring,
we removed the qpair destroying related code.
And this patch is submitted to address this issue. With
this patch, we can detect sock close of the fd from
the initiator, and correctly free the qpair related resource
(e.g., pid) managed by nvmf layer.
Otherwise, the initatior thinks the qpair related source is
freed, however it is not freed in the target side.
Change-Id: Ia2de07bd849fa5d3bc0e0e0d4941464dfd16d266
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440242
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
dev->mem_table_fds init in vhost_user_set_mem_table
but dev->mem may init later in vhost_user_set_vring_addr,
so if qemu crash or lost conntion after vhost_user_set_mem_table
and before vhost_user_set_vring_addr,
it's hugepage memory is not being freed
Signed-off-by: Honghui Wang <wanghonghui@ucloud.cn>
Change-Id: I782c106078829ff6691ed3265a5d1718493de90c
Reviewed-on: https://review.gerrithub.io/c/440254
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
