nvmf_ctrlr_cc_shn_done() and nvmf_ctrlr_cc_reset_done() are
almost same, so consolidate them together by adding a flag.
Change-Id: Ib7714d31a40f9d8d344ec2630c083c5d76dac8a1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9907
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Currently either HW Engine Channel or SW Engine Channel will be used.
In the case that HW Engine Channel is used while does not support related
operations like IOAT for CRC, it will shift back to the SW Engine's handle.
So that this is an issue that it still refers to the HW Engine Channel
while needs SW Eninge Channel to handle.
This patch introduces the SW Eninge Channel and always initializes there
in case that HW Engine does not support some operations.
Related UT also added to simulate the case the IOAT does not support CRC
and then SW Eninge needs to properly handle it.
Change-Id: I4ecdcd09ab669a616b37c567b45b1e6499800ec9
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
In some cases a single virtually contriguos memory
buffer can be translated to several chunks of memory.
To make such translation possible, update structure
spdk_memory_domain_translation_result to use a pointer
to iovec.
Add a single iov structure or cases where translation
is always 1:1, it will make easier translation callback
implementation. For RDMA transport translation of address
is always 1:1, so treat iovcnt other than 1 as an
error.
Change-Id: I65605575d43a490490eba72c1eb19f3a09d55ec6
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9779
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of a union with domain type specific
parameters, store an opaque pointer to user
context. Depending on the memory domain type,
this context can be cast to a specific struct,
e.g. to spdk_memory_domain_rdma_ctx for RDMA
memory domains.
This change provides more flexibility to
applications to create and manage custom
memory domains
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Change-Id: Ib0a8297de80773d86edc9849beb4cbc693ef5414
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9778
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Push operation complements existing pull
operation and allows to implement read data
flow using memory domains.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Change-Id: I0a3ddcb88c433dff7a9c761a99838658c72c43fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9701
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's too strict to fail the controller when there are no free requests.
Change-Id: I0a66ff2d294a2fd9326506ea50af4213aaaf8e92
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9848
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: GangCao <gang.cao@intel.com>
We already support Set Features with Host Behavior, so here also
add the support in Get Features.
Change-Id: I27d973e81fd6be89cc67ad559439334fc1087c9e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9818
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
nvmf_subsystem_get_qpairs RPC handler may cause the program
could not exit normally (e.g. ctrl c). Reason is that,
spdk_get_io_channel() will be called during the getting
qpairs stream, which will add refcount value for each
existing channel. When end target, channel cannot be
destroyed since refcount be added additionally and
its value could not be subtracted to 0. As a result,
the program will hang in the process of exiting.
So here we don't need to allocate a new channel, just use
the exist one.
Signed-off-by: zhaoshushu.zss <zhaoshushu.zss@alibaba-inc.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I08b4678edaa9404b8e8af125ebae572b31edf77e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9881
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
- remove metadata updater
- handle 'zero' flag in mempool allocator
- adapt ocf_mngt_cache_start() to new OCF API
Signed-off-by: Rafal Stefanowski <rafal.stefanowski@intel.com>
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Change-Id: I34afd856cc1306ffe305f71a445e7474c9b0a2d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9129
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
OCF requires separate mempool for each request size from rage 4k-128k. Mempools
are meant for both IO and OCF's internal requests.
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Change-Id: I3b37d287bbd6f963a24007c8485002f414fb8a7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7774
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adds context to currently existing traces inside bdev.c file.
These are going to be used later to match with traces from
nvmf layer to enable io tracing.
Change-Id: I599a60412f39144cdd306315a184b2000a61286e
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9497
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
This is to help with binding trace objects together and
for the convenience (all trace definitions are in one place
instad of being scattered accross multiple files).
Change-Id: Ib15bc9c2eeee9c4d0816bcee509ab69f3f558e19
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9574
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Enable tracing of tcp qpairs in lib/nvmf/tcp.c.
Change-Id: I692e74a972dcddd0bff193f1703470926e28b4db
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9288
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
This change aims to help with tracepoint handling in the future.
Instead of printing each trace directly with given values, we
will use this function to pass status change value.
Change-Id: Icc7f2863703899f818f0a2d5f49b69aa4e26a62c
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9690
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
The new name suits better to the following "data push"
operation
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ic3249f65de203f375477f8e87b0749b9502d165c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9878
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For GET/SET FEATURES command, some feature IDs will have data buffer
while some don't have, so here we will return the buffer length base
on the feature ID. The length is defined by the specification.
Change-Id: Ie9798585fc74544b77998aeebc2a20614c1c25f0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9689
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It is a bit confusing for the variable names to not match
the parameter names for spdk_bdev_io_get_nvme_fused_status().
These changes should make it a bit simpler to understand.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I833bf2a75cfec7b86da2d8a234f800de3510c2b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9867
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add the paired spdk_json_write_named_uint8|16 function
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ib7ee9ae4dbe9a4e9cfa28750f0b9a0af597d260c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9788
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previous patches (5363eb3c) tried to work around the
32-bit unmap and write_zeroes LBA counts by breaking
up larger operations into smaller chunks of max size
UINT32_MAX lba chunks.
But some SSDs may just ignore unmap operations that
are not aligned to full physical block boundaries -
and a UINT32_MAX lba unmap on a 512B logical /
4KiB physical SSD would not be aligned. If the SSD
decided to ignore the unmap/deallocate (which it is
allowed to do according to NVMe spec), we could end
up with not unmapping *any* blocks. Probably SSDs
should always be trying hard to unmap as many
blocks as possible, but let's not try to depend on
that in blobstore.
So one option would be to break them into chunks
close to UINT32_MAX which are still aligned to
4KiB boundaries. But the better fix is to just
change the unmap and write_zeroes APIs to take
64-bit arguments, and then we can avoid the
chunking altogether.
Fixes issue #2190.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23998e493a764d466927c3520c7a8c7f943000a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9737
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
seems it is not required, string is used instead enum
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ic67af6cfa6f8e22a6593f904cd5b5c1b51cae6ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9623
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously we decided which LUN format is used by the macro constant
SPDK_SCSI_DEV_MAX_LUN. However, as long as we read SAM, the LUN format
can be decided per LUN ID.
Linux host SCSI driver supports 256 LUNs per SCSI device at the
maximum. So we cannot test this fix on any actual system but we
apply this fix for the potential future cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifa6a3b66431f5e1eade326348dd99b8b9653408b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9664
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Most SCSI hosts, Linux, Windows, VMware, supports 256 LUNs per
device now, and it is not easy to test even if any other non-free
OS or driver supports more than 256 LUNs.
Hence increase the macro constant SPDK_SCSI_DEV_MAX_LUN from 64 to
256. Then we do not need to expose it publicly now. So move it to
lib/scsi/scsi_internal.h.
Update the CHANGELOG together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iacde46c3854f326eebfb8befb47d41fce383b027
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9631
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change a fixed size array to a linked list to manage LUNs per SCSI
device.
Keep the linked list sorted by LUN ID because this is necessary to
efficiently find the lowest free LUN ID or check the specified LUN is free.
To avoid traversing the linked list twice, change scsi_dev_find_free_lun()
to return the LUN which comes just before where we want to insert an new LUN.
Additionally, previously spdk_scsi_dev_add_lun_ext() had not checked if
the specified LUN ID was duplicated. Fix the bug in this patch.
Add unit test cases for the function scsi_dev_find_free_lun().
These changes will enable the following patches to increase
SPDK_SCSI_DEV_MAX_LUN from 64 to 256 without consuming additional memory.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7f6f070ddc680127cf86ae255055da2d1d29e4ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9630
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is the same effort as lib/iscsi.
By using spdk_scsi_dev_get_first_lun() and spdk_scsi_dev_get_next_lun(),
remove the dependency on SPDK_SCSI_DEV_MAX_LUN from lib/vhost.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib79d2c3f8e7a5027d3d2c03f8f886c588b86009b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9611
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use two new public APIs spdk_scsi_dev_get_first_lun() and
spdk_scsi_dev_get_next_lun() to manage iSCSI LUNs by linked list and
to traverse all LUNs of the SCSI device.
By these changes, we can remove the dependency on the macro constant
SPDK_SCSI_DEV_MAX_LUN from lib/iscsi.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3237e7f887dd761d6812ed4313f87b6e7884ea29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9610
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By this change, we will not need to traverse LUN list or tree in the
callback to hot remove.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibe72fba824553d0189b9120884aa2113599a568d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9627
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is an effort to remove the dependency on the macro constant
SPDK_SCSI_DEV_MAX_LUN from lib/iscsi.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ieeff4136b16cc6bfa92614248f150bc9dfe3dc74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9609
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Add two public APIs spdk_scsi_dev_get_first_lun() and
spdk_scsi_dev_get_next_lun() to remove the dependency on the macro
constant SPDK_SCSI_DEV_MAX_LUN from lib/iscsi and lib/vhost.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6546697f823fe9f4fa34e1161f5c7fa912dd2d59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9608
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The spec treats the sizes (MQES or qsize from create/delete
IO queue command) as a 0-based value of uint16_t, but vfio-user
treats them as 1-based value, so we need to use uint32_t to
make sure the value can't overflow. The same for NLB(number of
logical blocks).
Change-Id: I7654b7e12234525c0fce78a713dd50097e9b3d58
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9632
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function is used to check the IO SQ or CQ exists or not,
so return bool type is better and also rename it.
Change-Id: I1af2a25255b012dcf1e1952b828617ededf9b897
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9680
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Andreas Economides <andreas.economides@nutanix.com>
Previously vfio-user will hit an error when creating a deleted IO SQ.
For lookup_io_q() function, actually we should not use the queue's
address to check the queue is exist or not, as when there is a memory
removal, we will also set the queue's address to NULL and reset it again,
so here we use the queue state to indicate the queue is exist or not.
Fix issue #2174.
Change-Id: I56bdd63947c2b30a598c427e64ff2dafe1cc1d2e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9605
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Prior a regular round robin could result in strange performance
if an idxd device from another socket was used.
Signed-off-by: peluse <peluse@localhost.localdomain>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Id863c79067beabe73ef89d92b3fb3c436821b97a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9367
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
For debugging purposes, take a name for identifying fds added to a group.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If1654e56e19f7fa964446ef1b9e71debf74979d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9731
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Object's statistics (its index and start timestamp) are now tracked and
updated in the trace entry object.
This is the final piece of code that had to be copied from the trace
app. The following patch will remove that code from the application and
replace it with functions from the trace_parse library.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1acaefb5a516bbc59c0549b2f66a5c52368bcd2c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9435
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If5f1b1bea0d30419be46e704ddd7c2f9556b4627
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tracepoint arguments are now reconstructed when retrieving next trace
entry (possible from multiple buffers). Similarly to previous patches,
the code is directly copied from the spdk_trace app.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie7594d381660ef31c286b5e124d2a6df3835111e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9434
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Detaching a controller with `no_shn_notification` flag set will follow
the regular detach path making it asynchronous too.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0b9c6c23626b4cc1cfaedb3268024776a07b9195
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9003
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The controller detach had asynchronous API (with async/poll), but the
register operations were synchronous, so they would block on fabrics
controllers. In this patch, they're changed to their non-blocking
counterparts, making the detach fully asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I74df12ab40a54f1d675639672e03755c89768bef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8726
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previously we only use an assertion to address this sceanrio.
Fix issue #2173.
Change-Id: I7a6e715977218d2a3a08c48a9935880f3fe4ec63
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Andreas Economides <andreas.economides@nutanix.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
According to the specification, we should also post an AER
error event for this error case.
Fix#2171.
Change-Id: Ifb2343453ea5e36ce244938a939537ee6ed1c4e1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9584
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
POSIX defines PRId64/PRIu64/PRIx64 for printing 64-bit values in a
portable way. Replace a reference to %lu to remove the assumption
about the size of a long.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I622fd43e7acf2cb93d3ba4ba9e9367e6dd064a74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9663
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Added a definition of a parsed trace entry and a function allowing for
iterating over these objects. The difference between a parsed and a
regular trace entry is that it includes more information gathered while
processing the trace file (e.g. lcore, object statistics) and provides a
contigous buffer for trace arguments.
For now, only lcore and the pointer to the actual trace entry are
filled. Tracepoint arguments and object statistics will be added in
subsequent patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I4d5e30a7abb4860a5ba9db46f64ceae8bd14646f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9433
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The trace file is now parsed and the entries are put in a map, sorted by
their timestamps. The code is directly copied from the spdk_trace app,
with very little modifications.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7929497ffd3079b6974f5423c82a6128db2cee98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9431
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It gives user access to things like the tsc rate and tracepoint
definitions.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib50126b331faa4508174c7cb707643a3d8db6a01
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9430
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Copied code responsible for mapping/unmapping the trace file. The
only modifications were related with tying it to the spdk_trace_parser
object.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ia575101532c612b185bd971c69157623b52b9e81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9429
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This library will provide functions that parse traces recorded by an
SPDK application. This includes merging traces from multiple cores,
sorting them by their timestamp and constructing trace entries spanning
across multiple buffers. All of these tasks are currently implemented
in the spdk_trace app, so most of its code will be moved here (this is
the reason for using C++).
The motivation for extracting this code to a library is to be able to
use it from places other than the spdk_trace app, specifically the
`scripts/bpf/trace.py` script.
The main reason for creating a separate library instead of extending
libtrace is to avoid pulling in all of its dependencies. ISA-L is the
most problematic, as we only build it as a static library, which makes
it impossible to use with dlopen (making it unusable in scripts).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If101ca3425d7404abd51b0da2031358d0be44766
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9428
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We still don't support get log page with error
information LID.
Change-Id: I92db361dc956ea3ed4f6e7bdfdca763d0fea6886
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Similar is already done for json-rpc bdev_get_bdevs, it might be
useful for the upper layer which has no interest in all but only
in one specified.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ie1af1cb4778edd265914bbfdc2777f66c6c76572
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9362
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ifa8e80e0a25af7757181f480ab0405ec902a61ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9596
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
IO commands with invalid OPCs are not freeing the
associated request object after handling the response.
This would eventually result in requests on the qpair
becoming exhausted which ends up failing the controller.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7c1c46265a38b31181cd5d9a98c528816ab482d3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When data digest is enabled for a nvme tcp qpair, we can use accel_fw
to calculate the data crc32c. Then if there are multiple
c2h pdus are coming, we can use both CPU resource directly
and accel_fw framework to caculate the checksum. Then the datao value compare
will not match since we will not update "datao" in the pdu coming order.
For example, if we receive 4 pdus, named as A, B, C, D.
offset data_len (in bytes)
A: 0 8192
B: 8192 4096
C: 12288 8192
D: 20480 4096
For receving the pdu, we hope that we can continue exeution even if
we use the offloading engine in accel_fw. Then in this situation,
if Pdu(C) is offloaded by accel_fw. Then our logic will continue receving
PDU(D). And according to the logic in our code, this time we leverage CPU
to calculate crc32c (Because we only have one active pdu to receive data).
Then we find the expected data offset is still 12288. Because "datao" in tcp_req will
only be updated after calling nvme_tcp_c2h_data_payload_handle function. So
while we enter nvme_tcp_c2h_data_hdr_handle function, we will find the
expected datao value is not as expected compared with the data offset value
contained in Pdu(D).
So the solution is that we create a new variable "expected_datao"
in tcp_req to do the comparation because we want to comply with the tp8000 spec
and do the offset check.
We still need use "datao" to count whether we receive the whole data or not.
So we cannot reuse "datao" variable in an early way. Otherwise, we will
release tcp_req structure early and cause another bug.
PS: This bug was not found early because previously the sw path in accel_fw
directly calculated the crc32c and called the user callback. Now we use a list and the
poller to handle, then it triggers this issue. Definitely, it will be much easier to
trigger this issue if we use real hardware engine.
Fixes#2098
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I10f5938a6342028d08d90820b2c14e4260134d77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9612
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This commit fixes a race condition when calling free_ctrlr(),
nvmf_vfio_user_close_qpair->free_qp will set controller `ctrlr->qp[qid] = NULL`
finally, when calling free_ctrlr() we also need to check `ctrlr->qp[qid]`
is NULL or not, when there are multiple IO queues, we need a lock to protect
`ctrlr->qp[qid]`. However, the call to free_qp() in free_ctrlr() is valid
only when killing SPDK target, for all other cases, e.g: VM disconnected,
the queue pairs are already freed, so here we can process these different
cases separately, and avoid extra lock.
Change-Id: I7ab71f08bf4d737843b2af42e27b1571be0b45e9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9351
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Ideally, SPDK should make sure no pending I/Os in this queue
pair are using the removed memory region. Currently we just
stop the submission path and leave a TODO comment here until
we have an asynchronous way to do this.
Also use the `<=` for the boundary check.
Change-Id: I63a2189022978811dc21f92f2599f28a5191ecd7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9352
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch revert commit 8f7d9ec. In function vtophys_iommu_init(), we
can use `dev->drvier` in RTE_DEV_FOREACH() loop to count number of devices
probed by device driver using vfio APIs, or we will count all the PCI devices
that bind to vfio-pci driver, only the probed device's IOMMU group is added
to vfio container.
The original implementation is correct to count `g_vfio.device_ref` in
vtophys_pci_device_added(), we don't need to count it in
vtophys_iommu_device_event() callback.
Fix issue #2086.
Change-Id: Ib1502a67960a49e9a2f93823cc8ceab2e8303134
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9236
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Abort any queued admin requests once admin queue gets enabled. A request
can get queued if a controller is being reset and it gets submitted
while admin qpair is being reconnected. If these requests aren't
aborted, the init process will stall, as requests don't get resubmitted
while controller is resetting and subsequent admin commands required for
the initialization would be queued too.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If456a297d2d434b3cc741816cbfb13b01d37e963
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow to return more than one memory domain.
This change aligns bdev and nvme API and provides
more flexibility for custom transports.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ica9b12ad8463c361be6cb62ee2c0513eec0b486d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9546
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Enable dump of transport stats in functional test.
Update unit tests to support the new statistics
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I815aeea7d07bd33a915f19537d60611ba7101361
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8885
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function may return an error and we should handle it
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I996ceb6e300bd9527385aded9068b2841e94a20d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9278
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
nvme_transport_poll_group_remove() clears qpair->poll_group. Hence
we should not use it after that.
Fixes#2170
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I57ceee8c66684e2d02b51b8a0f3d66aacbcb9915
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9560
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
lookup_io_q() should return NULL when qid == 0 (admin queue). This
ensures that handle_del_io_q() won't delete the admin queue (which is
prohibited by the spec) and fixes#2172.
Also fixes a few related off-by-one errors.
Signed-off-by: Andreas Economides <andreas.economides@nutanix.com>
Change-Id: I7ab063f25bba45b755d84c9ddde82072cf01f5e8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9593
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We can avoid extra iteration to null queue pairs by using a list.
Change-Id: Idebd5a396959372004c33f8b21c555032af67aae
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9350
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Existing vfio-user assumes that the IO SQ/CQ are paired, so we
return an error when creating SQ with shared CQID.
Leave a TODO comment, we may support this in future.
Change-Id: I297ce53eb9a119469145e2453177d03252b629c8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9173
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Some spaces needed to separate some words from each
other.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8a3f5b0a848ca9cc8771c11545652c275c194e89
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9547
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Used to be in the lib directory but an upcoming patch needs
access to it so move it to a more appropriate location.
The changes in the .h file were needed to address compile
error when in the /include dir (didn't get errors elsewhere)
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I44d11fc620f213b13683d62dca899e2792ca6ed5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9450
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Renamed nvme_qpair_abort_reqs() to nvme_qpair_abort_reqs_with_cbarg() to
highlight the fact that it only aborts requests with specified cb_arg
and to distinguish it from _nvme_qpair_abort_reqs() which aborts all
requests immediately.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I32fec5ab0501b1beb8605689d73ec42a6424fba5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9323
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a controller is reset, it goes through the whole init process,
including establishing keep-alive, so there's no point in sending it
during that time. Additionally, it can stall the initialization if it
gets queued when adminq is connecting.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib9fee42f6097972e8ba336958f81e1b6b1a5f006
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9310
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Additionally, this patch removes reading the CC and CSTS registers from
`nvme_ctrlr_process_init()`, as it's no longer needed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If4f9e57dbf249fbce87e90018cff389f59906e38
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8621
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When the controller initialization is failed due to not being able to
read the CSTS register, an ERRLOG is now printed instead of DEBUGLOG.
It should make it easier to debug initialization failures.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I42602bd08e263faf2e87fe4a68abcc82ddec11ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9556
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The CC register is now re-read again when disabling the controller as
preparation for subsequent patches, in which the synchronous CC register
read will be removed from nvme_ctrlr_process_init().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ibfc8ed85bab188c3938451fbdfb771b969157807
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8619
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The host driver should do a wmb() before it updates the SQ tail doorbell
to ensure that any writes to the SQ are guaranteed to be visible if a
doorbell update is visible (a store-release) - and indeed, this is what
the Linux NVMe driver does.
Therefore, we require a rmb() after we read the tail doorbell in order
to synchronise properly with the host driver (we need a load-acquire),
and guarantee that the updates to the SQ are visisble to us.
Signed-off-by: Andreas Economides <andreas.economides@nutanix.com>
Change-Id: I57eb1e1f0dfb1091a8f10f40f8ee0e2604d9268c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9514
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The CSTS reads in DISABLE_WAIT_FOR_READY_(0|1) states are now done
asynchronously.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I4ca8ad286e259e8fcfbf484223288554280347fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Checking if the controller is enabled (CC.EN == 1) is now done without
blocking.
Additionally, a copy of the controller configuration register (CC) value
is now stored in spdk_nvme_ctrlr.process_init_cc. It'll be updated in
subsequent patches whenever the register is written / read. This will
make it possible to make several function non-blocking without having
send asynchronous register reads.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I8323cf0c31a5ea282840aab6cf8ca241ce8667be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8617
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is is the first patch in a series changing all register accesses in
the NVMe controller initialization path to be asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic4df9890992eafb402cf3372fe2ff3ac3c503932
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8615
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This removes some code that was duplicated in the
CHECK_EN and DISABLE_WAIT_FOR_READY_1 states.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie5d175540f71c692f7784c7ff22a48f34b9b7082
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8614
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It will allow the async callbacks to retain the existing timeout while
changing controller's state.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I4210f2cf7d4171444c338b8926334b985129a6c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8613
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It will make it easier to set this timeout once the register accesses
are performed asynchronously.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I9d61555a17380ddd57567db8dd912ef6d739fc01
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8612
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It will make it easier to support asynchronous register set/get
functions.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I9915609ff940596ae4d67388238cc685dfa426fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8608
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch introduces asynchronous versions of the ctrlr_(get|set)_reg
functions. Not all transports need to define them - for those that it
doesn't make sense (e.g. PCIe), the transport layer will call the
synchronous API and queue the callback to be executed during the next
process_completions call.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2e78e72b5eba58340885381cb279f3c28e7995ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8607
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
libvfio-user will assert if the command didn't have data
buffers.
Fix issue #2124.
Change-Id: I43e9562c614bc65e54dbf650447369317c10f7b5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9264
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: John Levon <levon@movementarian.org>
Currently, there is no way to prevent spdk_app_start() from calling
app_setup_signal_handlers() and setting SPDK's signal handlers.
We'd like to use our own set of signal handlers, therefore this
patch adds a flag to the spdk_app_opts struct that disables this
behaviour.
Signed-off-by: Andreas Economides <andreas.economides@nutanix.com>
Change-Id: I61d7cd66527d819fd5f687d5cc8a03be4fe10a6a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9380
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously the nvme_ctrlr_state_string() function
was only defined for DEBUG builds since it was only
used in DEBUGLOGs. So now that we're also using
it for an ERRLOG we need to define this function
in release builds as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic14b251fbd7da1519ad0fd4d8a183d6b6ca17984
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9468
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
