If verify is enabled, both data and metadata are checked. However,
if verify is disabled, read data is not checked even if dif_check_flags
is not zero. Add DIF/DIX verification for read I/O at completion.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ibde44bc244f84e40cef68653978191363acca5ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15074
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe-RDMA target has a helper function get_rdma_qpair_from_wc() and
uses it to identify a qpair from a WC.
NVMe-RDMA initiator has a similar function
nvme_rdma_poll_group_get_qpair_by_id().
NVMe-RDMA initiator will support SRQ in the following patches, and
it will want to identify a qpair from a WC.
get_rdma_qpair_from_wc() of NVMe-RDMA target uses wc->qp_num internally
anyway.
However, the upcoming custom transport for RDMA will have to use other
variables of WC.
Hence, it will be convenient to pass WC instead of qp_num if we consider
future enhancements.
Based on these thoughts, for NVMe-RDMA initiator rename
nvme_rdma_poll_group_get_qpair_by_id() by get_rdma_qpair_from_wc().
remove unnecessary declaration, and pass WC instead of qp_num.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I01ead4730207e2c6ac53b83f151bd5f977a11465
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
With RDMA, the admin poller can experience a remote disconnect when
processing completions. The admin qpair will be disconnected to handle
this. The disconnect code path will manually complete queued aborts.
However, the completion callback for the abort will attempt to resubmit
other queued aborts from the queue, which will result in a very large
stack and can eventually cause a segfault.
The fix is to not resubmit queued aborts if the admin qpair is in any
kind of failed state.
Change-Id: I4a6f959232c8a1bd30c87ca50459014e556cbaa0
Signed-off-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15114
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
This function was a bit cluttered so simplify it. Also, it was
assuming nbd module was loaded into the kernel prior running it -
this could silently fail the nbd_all[@] setup in case it wasn't.
Always attempt to load nbd driver before the setup and fail hard
if the driver is not in place.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I5884973944eae3e827eaafec16ba72e2cb4f70e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14994
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
zram doesn't support some of the uring-specific setup that xnvme may
be using, in particular the IORING_SETUP_IOPOLL, so switch to something
more common like null_blk module. For details see:
https://github.com/spdk/spdk/issues/2708
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I48b91ba356b4054433eb1835fa3e2708c8d2628c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
To fix issue: #2726
And also fix the examples/nvme/perf tool.
The srand() only needs to be called once to set the seed of
futher more calls of rand().
Change-Id: I41ab3a46593513516ad11ea7a5b8960b449e9867
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15108
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Do not run test with message send using hello_sock client with
KTLS enabled. CI does not have systems that run with openssl-3
and KTLS and it fails under Fedora36.
This test should be brought back after systems do run openssl-3
on board.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Id7c46ced745fb4564b7428202a902cb332d30b33
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14830
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also, clear generated fuzz logs upon successful test run - they may
get quite big (> 250MB) in size which doesn't play well with the
artifacts limit CI enforces. If the test succeeded then there's no
point in keeping them around for any potential debugging.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I240e8217cd50dba258310604c6985d8f6a832756
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15030
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: <sebastian.brzezinka@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Don't touch existing hp allocations when they already meet the NRHUGE
requirement. Introduce new environment switch, SHRINK_HUGE, to
override that new behavior.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I0cd124b98c3deb7c21b4fbd57529d0995978c2e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14912
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The SMA tests are now tested on CI, so they no longer need to be on the
skipped_tests list.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5746da06540efb1d3451a688fec4727d253bfc89
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14151
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Allow to run AUTOBUILD test in two versions:
* full - original one
* tiny - minimalistic, currently only check format and
check so deps
We want to reduce first phase of per-patch (called Pre-Tests)
by running only basic tests. To accomplish that we will run
autobuild test in tiny version. Full version will be executed
in second phase of per-patch (called Tests).
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I87d503ec272080ab238cf5129c44f92d8bb690ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14481
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Move the RPM builds away from autopackage.sh into a dedicated test
suite - this will allow the actual packaging tests to be run in a
separate instance.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I23a824db7aa3a5e469bea9b2536a83ae0a5c8e04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
See:
https://review.spdk.io/gerrit/c/spdk/spdk/+/12893
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I9dfd22e97645411bc24fdc0e62bb0dff9eed9abd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14841
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I82d0cb1116b822f1a1111b19d2dd1286d8a399c4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14829
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I2c7b0c450f76057af31c9501c1b9ac843e0e1ee8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14828
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Without this, the second run of grep adds output directly behind the
last line of the first one. This results in the last test (from the
first run) always being filtered out from the list by the next sed
call.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I1aa5d2acfc28cccdee1464462b0350f0cbc346c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14756
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To fix issue: 2719
In this case, if there is successfully configured job and continue_on_failure (-f)
parameter is set, it will continue to run for these jobs. Otherwise, it will just
stop.
Change-Id: Ia2940a9e1b5da63e50857da11ff7f811c7576e3e
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modified the code to fix the build error
"error: redefinition of ‘io_uring_get_sqe’" when building SPDK
with the latest liburing code.
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ie331ef0bbce143c92e2d7192465af995c8f451e9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12893
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
If the module stop handler is asynchronous we must wait until it
finishes before unregistering the io_device.
Change-Id: I149b716d9f4b0c1680b3e43b395fc9ec5b90d70c
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14717
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Make writes larger when necessary to comply with the bdev's write unit
size requirement.
Change-Id: Ief60d369bb3efb5de083c5951672e20f2dd9e0af
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14715
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Refactor blockdev_write_read_offset_plus_nbytes_equals_bdev_size() and
blockdev_write_read_offset_plus_nbytes_gt_bdev_size() to use
blockdev_write_read() similar to how it's done in other tests.
Change-Id: Iba853a0df1facd88ce7c206163386f6c8a9c7c1b
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14714
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Implement support for full stripe writes without parity calculation.
The size and alignment of write IOs must be a multiple of full stripe
size. To reflect this, the raid bdev's write_unit_size is set
accordingly. We rely on the bdev layer to split larger IOs based on
that.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I6940280ad870f3bd678fd19346b06ba4bdadd52e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7702
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add new bdev property split_on_write_unit which, if set to true, causes
writes to be split to match write_unit_size and fail if not aligned to
or not multiple of write_unit_size.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Id49f58a3288ddf5cfe4921ce4020ae4bcdd67298
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11390
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move device cleanup to spdk_io_device_unregister() callback. This fixes
a case when the device would be freed before its last io channel was
closed, leading to use after free condition.
Repurpose raid_bdev_free() to actually free the bdev.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Ib667b4d5ac1b34a0f2dda69f6b0775d9363dbfee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11398
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Depend on bdev layer to send down chunk sized IOs, based on
optimal_io_boundary.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Iec45f4917117d35c3a9e807940e49091dfcba870
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7699
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: If5369e76d5be42005a2c26d10c04dc0b03cb9092
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14665
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is the preparation to add virtio device test cases
with vfio-user target.
Change-Id: I08a33ac9cb6c1a6239841077facbf84927383814
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14647
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously SPDK use libvfio-user library to provide emulated NVMe
devices to VM, but it's limited to NVMe device type only. Here we
add SPDK vfu_target library abstraction based on libvfio-user which
supports more PCI device types.
We will add virtio-blk and virtio-scsi devices emulation based on
vfu_tgt library in following patches, actually this library can
support NVMe emulation too, due to the fact that the NVMe emulation
is already exist, so we will keep the NVMe emulation which based on
libvfio-user directly as it is.
Change-Id: Ib0ead6c6118fa62308355fe432003dd928a2fae9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12597
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This allows eliminating dpdk_pci_device_vtophys and
dpdk_pci_device_map_bar, reducing the amount of
code we need to maintain in the per-DPDK version
implementations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I73d15eb75bf7fe8340d85494425e15651fec5425
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14722
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Refine the macro definition name about queue depth and
prepare for next patch.
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I85bee2528ae4ab70292fc11aa62d05bae0c28a77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14664
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Delete bit masks from trace help (found inside
build/bin/spdk_tgt -h help text), as they do not
provide useful information, are much harder to
remember and use, and migh leave user confused.
Since we provide trace group names anyway, bit masks
are excessive.
Change --tpoint-group-mask parameter name to
--tpoint-group, because we do not provide
bit masks anymore.
Drop "default" tpoint group mask from help text,
since it does not enable any tracepoints and
may confuse the user.
Change-Id: I2ca780883dfa7822e76523e9ba1fc65a7bfe5a99
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Second vfio-user ctrlr is use to perform normal IO while fuzzing other
one, misbehaving ctrlr should not affect IO operation.
-Y <path/to/ctrlr> Path of addition controller to perform normal io
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I11c34e97723f9359bacd7866a9828a6d89c74992
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13882
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test has been recently failing in a way where atime is not
updated within the stat's %X resolution. Add simple sleep to
mitigate that.
Fixes issue: #2720.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I106357175028849ba037c9ee78c1e22a772fdfa3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14675
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add '-s 256' argument to 'autofuzz_vhost.sh' script. It was missed
in https://review.spdk.io/gerrit/c/spdk/spdk/+/14249. Reorder flags
to be consistent with test/vhost/fuzz/fuzz.sh
Fixes issue #2716.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I86ddc0b841c3733d10b51b062e61b6168fa3f2ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14672
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
During tests, the main portion of the app's time is spent in user
mode when polling is in effect. Currently, the idleness of given cpu
is determined in comparision to all the possible states the cpu can
be in. This makes it easier for third party processes to impact the
idleness of the cpu (as it may be lowered via different kinds of
loads).
For instance, if target cpu suddenly sees spike in a system
load (even up to 100%) it should not be relevant for the test where
it's known that the app's polling utilized mainly user mode prior
switching the scheduler.
With that in mind, if the general idle check fails, lookup the
raw samples matching the user mode and if the load is relatively
low (<= 15%) consider this as a pass.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: I4ab260d8bcf20a69f2f0be10f0fd7be577682be3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
By doing the registration immediately upon mapping the BAR instead of
when the memory is inserted into the spdk_mem_map, we're able to
register BARs that are not 2MB multiples in size and alignment. The SPDK
API for registering a BAR already returns the physical/io address in the
map call, and it can be used directly without a call to
spdk_mem_register().
If the user does elect to later register the BAR using
spdk_mem_register(), we attempt to insert the 2MB aligned segments we
can into the spdk_mem_map. Users may still need to register memory for a
few reasons, such as making spdk_vtophys() work, or for setting up the
BAR as a target for RDMA. These cases still require 2MB aligned and
sized segments.
Change-Id: I395ae8803ec4bf22703f6f76db54200949e82532
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14017
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
