If DPDK was not told to unlink the hugepage backing files during the
hugepage_init, the application will keep them open while holding a
lock on each file. Check if said lock is held, if not, remove the
file.
Change-Id: I738a3d7756c335b63388a2efeb03debd734d9c9e
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Main changes:
- By default, allocate all hugepages on node0. On NUMA-aware systems,
processes will most often use default policy with local node as the
preffered one for allocations. This usually is node0, thus splitting
hugepages evenly across the nodes, in default setup, would force
allocations from a remote node, impacting overall performance (in
case hugepages on node0 run out). See 68740678e1 as a reference.
- Introduce HUGE_EVEN_ALLOC - force setup.sh to evenly distribute
hugepages across all the nodes.
- Introduce HUGEPGSZ - overrides default page size
- Introduce CLEAR_HUGE - remove all hugepages on demand before
allocation is performed.
- HUGENODE - this now can be a list of nodes to use. NRHUGE will be
set across all the nodes from the list.
Change-Id: I084829edde3c416e7fc6b7b6abe369cc0631fcd7
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is done so user can easily filter out parts of the output which
are not relevant for additional processing (greping, seding, etc.).
Change-Id: I67eafd1fbeb723224cca6b0026e149cb7f85bfe9
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5152
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is done in order to improve the grepability of the output. Sort
is based on the BDF address.
Hugepages statistics are intact.
Change-Id: I121e9a46bfb1550380f233c1d5c06cefb9d4e7a9
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5022
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add an new optional parameter wait to the RPC, iscsi_create_portal_group
not to listen on portals until it is started explicitly.
Fixes the issue #1676.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic217f1ccceb618e70fdb2aff3f710d262a8a9bdb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5091
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add an new RPC, iscsi_start_portal_group, to start listening on
portals if the specified portal group is not started yet.
The next patch will add an new parameter wait to the existing RPC,
iscsi_create_portal_group.
The RPC allows the specified portal group to be already started,
and returns a success response in this case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I631d6bccffb38092c95694f922f10648e24d6ff7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5090
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Each nvme BDF can have multiple namespaces, hence multiple block
devices, return them all.
Change-Id: I93fe8acf5b1904f05514445eb3e970ef4254caed
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5170
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
lsblk will include all the potential holders|virtual devices given
block device may be part of. This is relevant in case a nvme|virtio
device is part of the lvm|md setup.
Change-Id: I32198ddcf71746c3cbad4a96496a1762a5c201cd
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5167
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We don't use this script to create qcow2 images for our tests in CI.
Also this script is using random vagrant box images, and we don't know
what is inside them.
Script maintenance is a tedious affair because fedora boxes use xfs file
system, and we can not shrink them virtual disk to minimal size, and this
will caused fails in tests in future.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I7b35f16bbfd6135377995f7b20e1402d14b2b1b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4738
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It could potentially override cmp binary, causing failures in some
of the tests.
Change-Id: Ia0bd88222c60e5b8a13d3809a6213b457b887b41
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5005
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We want to replace few qcow2 images with one universal.
This commit contains:
- change password in autotest.sh
- change image path
- change image name
- use snapshot mode in hotplug.sh instead of copying base image
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I75c457fe75f005b0ab43ca909be7886529ed115b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4551
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
In bdev_nvme_set_options command, timeout_us/retry_count/arbitration_burst/low_priority_weight/
medium_prioity_weight/high_prioity_weight/nvme_ioq_poll_period_us/io_queue_requests can be 0,
which should be passed in the rpc command.
Signed-off-by: Allen Zhu <allenz@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I2ebff51b7b7de418c5ac8fbd0265444fd27e1e10
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3816
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
in_capsule_data_size/buf_cache_size/sock_priority/max_namespaces can be 0,
which should be passed in nvmf_create_transport/nvmf_create_subsystem commands.
Signed-off-by: Allen Zhu <allenz@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Ib557cf9f20f7ec2c0b3c31156cd79dbd670ce7e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3815
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This parameter represents the number of control messages to be
allocated per poll group, specific for TCP transport.
The new parameter can't be zero.
Change-Id: I8ae198c0b46e9a5850a80492aa6260f0c6ef885e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4829
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add RPC that allows to change scheduler at runtime.
Change-Id: I008670f5e936bc25a0fbc923b826277d15343273
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3958
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
gen_nvme.sh will no longer generate the legacy configuration.
"--json" option will still work for any current users of the script.
Tests were modified to no longer use the "--json" option.
Meanwhile others were simplified with switch to "--json-with-subsystems".
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8450be98660e54c64c27d8401fc40d649f9403ea
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
INI is deprecated, use JSON configs for fio plugin instead.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3075e79ed7601116e837536a818821372362eb8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4762
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If devices are not picked up from the cache, iter_all_pci_class_code()
will pick lspci in first instance to iterate over the pci bus. If said
tool is installed on FreeBSD, it will return BDFs in format which won't
be understood by pciconf (which is used to determine which driver given
device is bound to):
pciconf: cannot parse selector pci0000:00:06.0
To make sure pciconf understands the argument it's given, simply
replace .function with :function (0000:00:06.0 -> 0000:00:06:0).
Change-Id: I59d4f7050c65df99626a3d449aa0a5bb122d4081
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4665
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If they are not, there's no point to continue setup on FreeBSD.
Change-Id: I6d94712f1507c0597fbd569ff73c52f262ab9df9
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4658
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In case contigmem is loaded, but the kernel environment hasn't been
properly updated with hw.contigmem.* options, kenv will fail,
breaking the check to determine if contigmem should be unloaded.
Avoid the above scenario by determining first if given option is
actually set in kernel's environment.
Change-Id: I4118b7622fd876b28f0c07d081c583f5782f0357
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
“Requirements files” are files containing a list of items
to be installed using pip install. We're going to need
this for SNYK scans. We can also later use this file
in our pkgdep.sh installation script.
Change-Id: I3224f21ee4cbe170c9840aac38156eeee627c257
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4532
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The internal vhost library is used when DPDK's version
is older than 19.05 and the experiemntal vhost nvme
target.
For the CONFIG_INTERNAL_VHOST_LIB option, SPDK doesn't
enable this option by default over one year and CI
doesn't cover it either, so we may remove it with
this release.
As for the vhost-nvme target, since we are developing
a new vfio-user target solution, it's OK for us to remove
it now.
Change-Id: Ib2cce1db99cd09754307c2828b3187f2d4550304
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4562
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There should be no Qemu param "namespace" added for
emulated nvme drive (i.e. default should be used).
This condition was faulty because ENV variable storing
this information is a text and we check for != 1 as for
and integer.
Change-Id: Ic87aadbbc7eb1ba1ec700bccdb8864726a6562e1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4159
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Mellanox Build Bot
Previous check was always returning true forcing vagrant to add
additional net device to each VM with the same local ip address.
This interface is not needed by vagrant for communicating with
most of the VMs so make sure it's added for the openstack tests
only.
Change-Id: I64092d5c113d3b5f4575f83db640bf5dd40d4bf8
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4542
Reviewed-by: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Original code removed $symbol prefix from every entry in
$defined_symbols. This was incorrect shown by example
patch next in series.
Original function spdk_json_decode_object() was moved
and spdk_json_decode_object_relaxed() was added.
This resulted in $defined_symbols containing entry "_relaxed".
Now each entry in $defined_symbols is checked separatly to
match exactly to the removed $symbol.
Reported-by: Jacek Kalwas <jacek.kalwas@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1d9931d2e93dc85465ce47a838a176c6ab5f1587
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4357
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Some 4.18.x kernels are shipped with a broken uio driver due to the
following change:
git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9421e45f5
Try to detect if we are running against a faulty uio driver and if so
fallback to igb_uio driver if present. The priority of picking up the
drivers has not changed.
Note that this commit may be deemed as not needed since from CI
perspective the https://review.spdk.io/gerrit/c/spdk/spdk/+/4342 may
be simply enough.
Change-Id: I9b12511c203c0be0e8f3f462c9c96babde52dc6e
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Recent refactors removed the behavior introduced with a6edaa9600.
Bring it back and don't try to rebind the VMD devices if they were
not explicitliy allowed in the setup.
Also, shuffle the code a bit and put verification pieces under one
block where $mode is being determined.
Change-Id: Ie2cc41e402f20147b98ab288d623ac76a4472839
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4398
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It seems that RHEL systems can be actively used without an actual
subscription. Since we don't really want to bother with this side
of the system, simply ignore all subscription-manager's failures.
See https://github.com/spdk/spdk/issues/1542 as a reference.
Change-Id: I76a58cb38bb77b3b6deb12e0cc8ccca5f883d5a7
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4360
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Also, put it on yum's cmdline separately since it doesn't really
belong to repos[] - it provides proper tooling not the actual repos.
Change-Id: I26c0c90b52f5b4fa914c116477092df525b4448f
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4359
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Updated required NASM version to 2.14,
since intel-ipsec-mb v0.54 now requires it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I10cee6aea941593b828a6a171297d7e997d0f30c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3868
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Error log as below:
06:27:53 # nvme_namespace_revert
06:27:53 # /home/storage/workspace/opal-end-to-end-reservation-autotest/spdk/scripts/setup.sh
/home/storage/workspace/opal-end-to-end-reservation-autotest/spdk/scripts/setup.sh: line 109: /sys/bus/pci/devices/0000:80:04.2/driver/remove_id: No such file or directory
home/storage/workspace/opal-end-to-end-reservation-autotest/spdk/scripts/setup.sh: line 110: /sys/bus/pci/devices/0000:80:04.2/driver/unbind: No such file or directory
06:27:54 # trap - ERR
Change-Id: I302e58143f0e165b17a9b5edd14121e6282f55a7
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4094
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The main purpose of this is to force vagrant into using its own
ssh keys when password authentication is requested. Normally,
when ssh.password is defined, vagrant will attempt to inject its
own ssh key, by using provided password first, and re-use the key
for the new ssh session to provision the VM.
However, some vagrant boxes may come with their own embedded
Vagrantfiles which define custom ssh keys. If password auth is
requested for such boxes, vagrant will not use its own key, nor
the ones that may be defined by the vagrant box. Instead, it will
fallback to interactive, password authentication. From the CI pool
perspective this is not desirable.
On other note, this ties to the ongoing work of building indepdent
images for the CI where vagrant boxes will be deployed with a
custom ssh key alredy provided inside the box.
Related work:
trello.com/c/gAfo9mH1/208-vagrant-improvements-box-packaging
trello.com/c/9Dxp2Y9c/248-packaging-centos78-and-freebsd1112-with-packer
Change-Id: I49035b426519d9b24bcdab573d335ee622130560
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4283
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is a bool, hence it doesn't require any additional
arguments.
Change-Id: Ibc438f77c5c63ec5dc38007826268a494d8e661d
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4239
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifc5e28feacc27f1607a2aa19f3147c6cc9cad106
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4161
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
