IDXD has always been used everywhere but technically it stands for
the driver, not the HW (Intel Data Streaming Accelerator Driver)
where the X comes from "Streaming Accelerator" somehow. Anyway, the
underlying hardware is just DSA. It doesn't matter much now but
upcoming patches will add support for a new HW accelerator called
the Intel In-Memory Analytics Accelerator which we'll call IAA and
it will use the same (mostly) device driver (IDXD) as DSA. So, calling
the HW what it is will lessen confusion when adding IAA support.
This patch just does renaming for the accel_fw module and associated
files (RPC, etc).
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib3b1f982cc60359ecfea5dbcbeeb33e4d69aee6a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11984
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As introduced in 25bc221cee:
listeners for created subsystems should also be added
to discovery subsystem.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Id37854ea9a7877eb3e4eb37675d6918ef2931e7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12676
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Spread out used block devices evenly between
used initiators and then between initiators NIC
interfaces, so that in result each initiator
connects to the same number of subsystems.
Previous version had problems spreading block
devices / subsystems between interfaces in case
division remainder was not 0.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I045dc9313b0613685fc997f821fe66238026a645
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12732
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Save Initiator addressing information in Target object.
This will be needed later to properly spread created
subsystems between initiators and NICs.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I9e5545b7847bb16f3ce3d0ee56038003fda74e6d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12731
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Always reload ICE driver after tests with ADQ enabled.
This is to reset tc qdisc and filter settings and make
sure they don't affect future tests.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I70b94ef236741fe81870954f9901e02b9b5aadb9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12622
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use different file to save calculated CPU utlization
and do not modify original SAR output.
Change-Id: I415242a5610f1c2a43a038baafa8dcc4f9e8fae2
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12526
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move sar output file generation into measure_sar
function and pass a file name prefix instead.
More than one file will be created by the function
based on that prefix.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I671887d4d232821c0de19eb338150d30201be204
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12525
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Re-phrase "waiting" message a bit and add another
message notifying that measurements are actually starting.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I55d8ed761bf45a590322cffc5b776a44774977dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12522
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
After 7610bc38d, python modules are now located in the python/
directory. That patch also updated PYTHONPATH assignment in most of the
scripts, but one of the perf script and some docs/messages were missed.
Change-Id: Iff3588526f2a382e599f5734d38fc32c15a7bf56
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12223
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fix pylint findings:
- R0201 Method could be a function
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I1b9141b9ab150e20fdcd63510b484c6be514efb5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12137
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Up until now, importing an SPDK RPC python module was just a matter of
`import rpc`. It's fine until there's another module called `rpc`
installed on the system, in which case it's impossible to import both of
them. Therefore, to avoid this problem, all of the modules were moved
to a separate directory under the "spdk" namespace.
The decision to move to a location under a separate directory was
motivated by the fact that a directory called scripts/spdk would look
pretty confusing. Moreover, it should make it also easier to package
these scripts as a python package.
Other than moving the packages, all of the imports were updated to
reflect these changes. Files under python now use relative imports,
while those under scripts/ use the "spdk" namespace and have their
PYTHONPATH extended with python directory.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib43dee73921d590a551dd83885e22870e72451cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9692
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK has settled on what the optimal DSA configuration is, so let's
always use it.
Change-Id: I24b9b717709d553789285198b1aa391f4d7f0445
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11532
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I80e1fdb8b0a3b944ab6efdd21187cef07b685c29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11271
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add configuration options to enable using IDXD
for data digest during NVMe-oF performance testing.
Change-Id: I54d443c35c67e0331e3d6ec4aecb577fc7f544c7
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10282
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I72fc8cb42f57d3272a08a6cefc58b2fa5eb26419
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11094
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
As described in Python documentation:
It is not guaranteed that __del__() methods are called for
objects that still exist when the interpreter exits.
Because of that class instance objects were not always destroyed
after tests.
Change-Id: I10f05a480cde37d274d6475efdf47d094cab7cb9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11136
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I780568b9c95a47038278c3ed19fb08228a48fb9c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10740
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
TypeError: ethtool_after_fio_ramp() argument after * must be an iterable, not int
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I12403967b5b8ce7282c65296a54e00bd047cf903
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10367
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
When I use a single json config to run 4k and 64k together, the IOPS
for the 4k test were lower than expected because the script is using
metrics from both the 4k_64_randrw_m_100_* and 64k_64_randrw_m_100_*
to calculate the average metrics because 4k_64_randrw_m_100_* is in
64k_64_randrw_m_100_*. Fixed issue by checking, if the result file
startswith the name of the fio config file.
Change-Id: I630385c34223b38694d7e2bb578779627c89866d
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10127
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
A temporary workaround for issues seen when using "adq_enable"
is to set channel-pkt-inspect-optimize on before fio ramp_up and
turn it off when ramp_up is ending.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I74f71d11e3b9d1a064b36de8acc7a2a23f51a34b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9879
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
* Added sleep as sugested in config guide
* Moved adq_configure_tc() before nvmf_create_transport()
* Added extra logs to output
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Icc253b98a0fadbe917e912342f91e2bc5ca5064b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9703
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ibcc7a77d1ebcc013b5050564fcc31b23b1202912
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9840
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I1a4d32de6a83800cdcd65dde3895a36731c52838
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9710
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ia858a47e51a6ef4a0fba1dc1e68d314b27e20342
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9276
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Do not print ETA output. This pollutes logs when long
benchmark tests are run.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0dfe30fdd727decb4d81be6b530e675bc1f4518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add option to enable gathering BPF traces while
running the test.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I9ea317a37c3638def40a525eca06f2d8325a74c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8644
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add exceptions to results parsing and fio run functions
to better inform what's the cause of the failure.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I94e51cb8f77515f7d26a75501011d6111820ae56
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8742
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Enable "kernel_engine" option for Kernel Initiator
class to enable ability to use io_uring engine on
initiator side.
For NVMe-oF this has limitations as apparently it's
not possible to enable polling on the initiator side,
which in turn makes fio "hipri" option also not
possible to use.
Adding #TODO sections with notes in case this is
later fixed in Kernel NVMe driver.
Signed-off-by: wawryk <maciejx.wawryk@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I31da52946692015237263abc77d8425b5eae5b98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8134
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie46df6e4f52b59941a90eeb786954fe7d5f1d089
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8040
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvmf_subsystem_add_listener() in rpc/nvmf was modified
by 64debe0453 and the
change was not reflected in performance scripts.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I7bb8c39ab225421964e37883aa7b0f824e8df683
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7978
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Added 'rate_iops' FIO option to the performance scripts.
This will be used during tests where limiting factor
has to be artifically imposed, rather than come from
the target/initiator system or enviroment.
One case for this are scheduler tests, to limit
each connection and balance the threads accordingly.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I10bb09be9205a8b7ba90b36cd4e0bf922b0ecbc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7840
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I9b9f8c9e407425fdab1e84050354481ad76c19c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Rename to target_nic_ip to better match NVMe-oF
terminology.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0644410cfb063eeea740c54f5860aeefdb52d52d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7089
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK directory needs to be copied to initiator systems
earlier for set_irq_affinity to run.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0f9ade02e58c9224e0b2ddc75117baaf653be614
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6776
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Need more investigating how to properly enable ADQ
for Kernel mode. Do not run Kernel + ADQ configuration
for now.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I700ef417b9b398c067a586a1a5ad9947a92057ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6566
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Readme was frequently missed when adding new stuff or
updating the performance script, and it is out of date.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1710473be576ffbcc2fa8e3701b196bd46cf6654
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6538
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Create a default traffic class (tc0) with minimum
needed number of assigned threads and a priority class
(tc1) with number of assigned threads equal to
number of application threads.
Finally run set_xps_rxqs to configure symmertic queues.
set_xps_rxqs script used from Intel ICE driver
package available at:
https://downloadcenter.intel.com/download/29746/
Intel-Network-Adapter-Driver-for-E810-Series-Devices-under-Linux-
Change-Id: Ie0f2db266621a9dabb1621344bfdc5fa64fee03c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
There are multiple cases for counting number of CPU threads
on Initiator side. Keep track of num_cores in all of them.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I4b8d1d79a2aa17706d206b149c1c8e8816ae2ef5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6536
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Set busy_poll to 0 for non-ADQ. Having it enabled with
this value results is huge latency increase.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ic68ed2b7dc19b8d4b274ce8622194489693863cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7480
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
num_cores name was misleading, as the parameter actually
contained core mask (or core list). Create separate
class attributes with core mask and number of cores.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ibfae7770aea2f2c1c720abf567400deb50028ab4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6535
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Save info about subsystems created subsystems (target
side) and remote subsystems (initiator side) into
a list.
Change-Id: I7ec1c6a4d1f75060b69b68e0b8e0dd61789fc9e0
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6374
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
