The time required to wait increases with the amount of submitted
FLR resets. Now that DPDK takes less and less time to initialize,
this starts to become an issue. We can even see on our CI within
regular tests where a single application is start-stopped in
a short period of time. This is also a problem if a device is
detached via RPC and immediately attached afterwards.
The time required to wait seems to cap at 2 seconds, so instruct
our driver to wait exactly that.
Change-Id: I18b6fbdea9b0dca5d7e1756e9ead7d97119f2fa2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429415
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is an NVMe-specific issue and I/OA or VirtIO devices don't
need it. Additionally, the delay is now asynchronous, meaning
that potentially multiple NVMe controllers can wait all at once.
The drawback of this change is that we're needlessly waiting
even when using uio_pci_generic. However, since the delay does
not block anymore, its impact is significantly minimized.
Change-Id: I5d16a7fd7cb66c785acb687f14690e95f6188b9e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This indicates an out-of-spec device, so just print an error
message but don't bother retrying the AER.
While here, add status code type (sct) check for the other
status code check when an AER fails - it is not enough to
compare just the status code.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibd26549aa08d3eb4814c239b6b2c6fe95e069a54
Reviewed-on: https://review.gerrithub.io/429533
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With Identify Namespace Identification Descriptors can be
executed asynchronously, most of functions in the controller
initialization now can be executed asynchronously now, for
host with multiple controllers this can save some time during
initialization.
Change-Id: I70e3c6c2c691134d2ae4c5969288cced1538c6cc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/428585
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I189ad8889c74937bf43bcf2c3029416ddb94976d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/425705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Change-Id: I1e5be0e282b9e29f7bf7ca7d2720b9fd00539be0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424776
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ide0c81b1cc29d67cec0c10ab877360db3699141e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424775
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently in the function nvme_ctrlr_start() the initialization
process is executed as a whole, in the case there are many controllers
in one system, which means other controllers must call the function
one by one. While here, we add several states here, which can
help refactoring the initialization process.
Change-Id: I209cf964bbf6e151823a7ecdc6a3f6e6e69df297
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I51b312a086f18a5b5f63de27dd69e43a8cc7225d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424914
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idd365df7fb61eafb502f415adf70638bb91ded0e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424773
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ib5e977b0bad15af7a2a71000c1fc4861b5b5b0af
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
QEMU emulated NVMe SSDs report themselves with an Intel vendor ID,
but don't support the Intel vendor-specific log pages. So add
a quirk to avoid confusing error messages.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic41476801ede94d43acb9972217ea7420ca53679
Reviewed-on: https://review.gerrithub.io/423422
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change the type of nvme_timeout parameter in
spdk_nvme_ctrlr_register_timeout_callback from uin32_t to uint64_t.
Reason: This will make the timeout trigger test more flexible and
will not affect the original meanings.
Also for the configuration file, still maintain the compatability
support
Change-Id: I94c90f67b2e9c57220ab82ecea11a1590d62aed4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/419326
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add some known Samsung controllers to those requiring the quirk,
NVME_QUIRK_DELAY_BEFORE_CHK_RDY. Addresses an issue for those
who may not have later firmware that corrects the problem.
Correspondingly, extend the delay from 2 secs to 2.5 secs.
Change-Id: Iee773905a2a49711775042c061f6c347e0da85e9
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/419273
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The spdk_dma_zmalloc guarantee about physical memory contiguity
is about to be removed soon. For hardware rings that require
physical memory or IOVA contiguity we will now enforce hugepage
alignment and size restrictions to make sure they occupy only
a single hugepage.
Change-Id: Iebaf1e7b701d676be1f04a9189201c5d89dad395
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/418547
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
All controllers have a controller ID (cntlid), and this will be needed
in other NVMe-oF transports, so move it to the generic controller
structure.
Change-Id: Iaba5b93e1267e7bef3a6eb7c677c549a3d83985c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416577
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0408e571362527e7c2d4759223946a0b4d7c675
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/415896
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor qpair destruction function so that we can put common
resource release together in future.
Change-Id: I44139947820c2a384b745ae2673799f1b736369c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/412604
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was partially fixed in commit ddeaeeec19 ("nvme: Only check
timeouts on requests from the same process"), but the function that
calls nvme_pcie_qpair_check_timeout() was also erroneously filtering out
the admin queue. Restore the original behavior of checking all queue
types.
Change-Id: I26a44ff5eb772735d314ce7b8322ba9222675911
Fixes: 31bf5d795e ("nvme: make timeout function per process")
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/411628
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For attach/detach command, the identify namespace data should be
updated during the namespace attribute notice event callback, while
here, in case of the driver may not set aer callback, so update the
namespace identify same with attach command.
Change-Id: Ie594b2ff646a67488d03af2771c00f9947395aba
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/412884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Number of Namespaces of controller identify structure
defines the maximum number of namespaces supported by
this controller, for physical NVMe controllers, the NN
is a fixed number, while here, we set the same rule for
NVMeoF controllers.
After NVMe driver got namespace notice event, it should
update the namespace identify data structure for NS
attach/detach commands.
Change-Id: Id72a2600a2ce9492fa2d6e09924667acbb77ae43
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/412883
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor out the common pattern of waiting for an internally-submitted
command to complete. This will give us a convenient central place to
add error checking.
Change-Id: I65334d654d294cfb208fc86d16fa387ac5432254
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/412545
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As of NVMe 1.3b, there is only one command set. But pipe
this through the driver per-spec anyway.
Change-Id: I4faf8596f5ce638e5e2a500b424e00ceb6e89edc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412102
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For the same reason as commit 31bf5d795e ("nvme: make timeout function
per process"), the AER callback also needs to be stored in the
per-process controller data structure.
Change-Id: I41425d81a2ab16c06ef9b900bef6a6128117fcb0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410953
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The per-process controller data may only be touched while holding the
ctrlr_lock.
Change-Id: I18c8c4e43db4d58e6b86f0c0fd222f6d30830b85
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410952
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7598222db5d76c1a1578fbb5935d4348f7c62f54
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410951
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I9cfc237a8514a1d323313851e14576ba2ba69077
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/410529
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8573732b3049e2a5b471e5a0313e39019fdaad5f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/410518
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will be used later instead of retrieving VS (potentially via a Get
property command for Fabrics) multiple times.
The Active NS List code was previously depending on the VER field of the
Identify Controller data, but this was only added with NVMe 1.2, so we
can't rely on it to detect NVMe 1.1 controllers; it is changed to use
the new cache VS value instead.
Change-Id: Iba9ed5ecbc82b4654973438d119daba0c4cf0724
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408895
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In addition to checking for the required version, also use the OAES bits
to determine which features to request.
Change-Id: Idb07e4175cca5609904876bd17d912b50bc6b62a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/409352
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ia2fd4d31560c9117b167cbf12d2749c303e4cb8c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/408772
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The functions they were referring to have been renamed; rather than
fixing up the function names, use the spec-defined NVMe command names so
it's more understandable. (The second message was also incorrectly
referring to "set" instead of "get", which is fixed as well.)
Change-Id: Id140a91c837d8c913760d2f55318472689c00f45
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/407593
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Similar to the previous patch, some controllers may report 0 namespaces;
we should still be able to send admin commands in this situation.
Change-Id: Ia14e3ce773c63e645199e1c40ba5b37095da2473
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/407497
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A controller that fails the Set Features/Get Features - Number of Queues
won't be able to create I/O queues, but it may still accept admin
commands.
Change-Id: Iec79d641f7d460448a8d8e1295764f1f03f98594
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/407378
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6e58baaeb09580b5f70e1acf5323376ca0b26bbf
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/407382
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I79dad84d1dc58e61eb36b461b41fbd7ee73631fc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/406899
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Add support for multi page CNS 0x2
- Use CNS value 0x02 (SPDK_NVME_IDENTIFY_ACTIVE_NS_LIST)
to query active namespaces
- Add an API to iterate the active list
Change-Id: Iea524881fa6e3610a7d85ab02a2005a92fd633df
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/401957
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to remove most uses of spdk_pci_get_device(), which looks
up a PCI device structure from an arbitrary PCI address. This function
is problematic, since it uses internal DPDK data structures that aren't
meant to be part of the public API. There is still one use in the
codebase, which will be cleaned up in another patch.
Change-Id: Ia1fe1f799c240195f6871c1d92821074f884c4e6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/405707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Convert nvme_ctrlr_cmd_identify_controller() and
nvme_ctrlr_cmd_identify_namespace() into a single function,
nvme_ctrlr_cmd_identify(), with generic parameters that should be
suitable for all current callers as well as future users.
These functions were internal-only, so there is no public API change.
Change-Id: I3dbb3e6b00308b67ba1f161f8a6b11b6333fca57
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/404733
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
