During converting type of CHAP params of target from int to bool
for JSON, changed names of them to be consistent with others.
In this patch, adjust variable name of struct to of JSON.
Change-Id: I1ccbfa11d57479dc55680835eb80e111bd24d9a3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400928
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds a iSCSI poll group for each core,
thus we can poll a group of connections instead of one
by one on each core.
Change-Id: I9cd82c8c0f7f6e7b3ee34034339638199bfca5da
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/399565
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Orderings of portal group create operation are diferrent between
config file and JSON-RPC. Unification is necessary for correct
concurrency control and the global accept poller like NVMf-tgt.
Hence unify the ordering of operations in this patch.
Common ordering of portal group create operation between configuration
file and JSON-RPC after this patch is the following:
- create a portal group
- create portals
- add the portals to the portal group
- open the portals of the portal group
- add the portal group to the global portal group list
After this patch, the gap between listening socket and accepting socket
will be increased a little when portals groups are creted by config file.
However this will cause no issue because of the TCP backlog and resend
mechanism.
Besides, necessary concurrency control is added and minor refactoring
is done.
About portal group delete operation, orderings of application shutdown
and JSON-RPC are already unified.
Change-Id: I1db7ef4400388127134d7734c68e138a4573b734
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/396848
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fixes github issue #218.
This patch introduces spdk_cpuset object to store and manipulate
the set of individual CPUs. The main objective of this object is
to replace cpumask declared as uint64_t and extend the limitation
of supported CPUs (lcores) above 64 CPUs.
spdk_cpuset is always allocated dynamically and accessed by opaque
pointer, what makes it easier to extend in the future without
breaking API/ABI.
This patch also extends parsing function allowing to set cpumask
using a list of cpus e.g. "[0-4,10,12]" sets mask of 0,1,2,3,4,10,12
as well as hexadecimal string with and without "0x" prefix.
Change-Id: I475c3ba7fab629021a22e03176e57e400dd24a49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/390794
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To use JSON dump of iSCSI global parameters as configuration file,
at bootup, it must have completeness.
This patch fixes the following:
- DefaultTime2Wait was not contained.
- MinConnectionsPerCore was not contained.
- Converting only 0 to "None" for dump is not efficient.
Change-Id: I740e6938c216c5c62df6ee70b0ceac40fd0cac00
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/396100
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Some upcoming changes will effectively render this moot
anyways by adding an epoll/kqueue descriptor to poll
on in all cases (not just connections that have been
idle for 5ms).
The epoll/kqueue code was just ifdef'd out instead
of removed - some of this code will be useful
and reusable with minimal changes in the upcoming
patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c354390537e6369cb3c32e78a59c300dec6d098
Reviewed-on: https://review.gerrithub.io/395553
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This concept was added very early in the SPDK iSCSI target
development process when there was a high focus on maximizing
throughput on a single iSCSI connection with 512-byte reads.
Realistically, in multi-connection environments focused on
predominantly 4KB (or more) workloads, this concept loses its
effectiveness - it is relatively rare that PDUs from multiple
I/O would coalesce within the default 8us flush timeout period.
There were no users of flush timeout in the SPDK tree - it was
not even documented in the iSCSI configuration file example and
there was no way to modify it at run time. So leave the change
out of the CHANGELOG.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I08c3e959fb3945dc2c9cb89248305d0c88aa778f
Reviewed-on: https://review.gerrithub.io/395520
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is no need to keep a lun name anymore - we always
use the bdev name as the lun name so it is not providing any
additional value. This also keeps us from associating
the same bdev with different LUNs on different iSCSI target
nodes or vhost-scsi controllers.
Side effect of this change is:
1) Use "bdev_name" across the APIs to make it more clear
what these names refer to.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3d42fde22087352ce1d5dc80178bd8c5cac8cb7c
Reviewed-on: https://review.gerrithub.io/390843
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The only errno value that can usefully be returned from malloc(),
calloc(), realloc(), strdup(), etc. is ENOMEM, so there's no need to
translate the errno value to a string for the error message.
Change-Id: I8e8bd4f12ec4f3b99649760e397e1bc71cca7eff
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/392985
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
User can specify processor affinity for each iSCSI connection
by specifying cpumask in the configuration file.
However the example of iscsi.conf.in does not have any description
about this. Hence it is very difficult for user to use this.
The portal group section of the config dump file has the same
description. Hence it is also changed.
Change-Id: I6e7b3bb67e10e78f4a47165525f023555080f146
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391510
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
All SPDK libraries should use the spdk/log.h family of functions
for logging.
Change-Id: I2b8ac30f2901b325784552f0016f1058ae2cd577
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391687
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: To remove the dpdk dependency for iSCSI.
Change-Id: I01ef910496d2029ba755dd6d0c06d61c248b8dfe
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/390938
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Require braces around all conditional statements, e.g.:
if (cond)
statement();
becomes:
if (cond) {
statement();
}
This is the style used through most of the SPDK code, but several
exceptions crept in over time. Add the astyle option to make sure we
are consistent.
Change-Id: I5a71980147fe8dfb471ff42e8bc06db2124a1a7f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390914
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Disambiguate the log components from the trace functionality
(include/spdk/trace.h).
The internal spdk_trace_flag structure and related functions will be
renamed in a later commit - this is just a find and replace on
SPDK_TRACE_* and SPDK_LOG_REGISTER_TRACE_FLAG().
Change-Id: I617bd5a9fbe35ffb44ae6020b292658c094a0ad6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
MaxQueueDepth is configurable for NVMf target by configuration
file. This patch makes this flexibility possible for iSCSI target
too. Increasing macro-defined constant for MaxQueueDepth consume
extra memory regardless of the necessity and hence it may be
better to avoid that.
Change-Id: I7fa9cf86b02c5a8b16411d4b4d356c6e6c0dc3eb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/388552
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I054b0f20fa502f30ae3802f95ef108fc92132ff5
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/390558
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is a preparation for dynamic reconfiguration of PG-IG maps.
Current PG-IG map is implemented by a fixed-size array. Linked list
will make much easier to support dynamic reconfiguration of PG-IG maps.
Current:
target - (1..n) ---> PG_map (1..1) -> PG
|
--> IG_map (1..1) -> IG
This proposal:
target - (1..n) -> PG_map --- (1..1) -> PG
|
-- (1..m) -> IG_map - (1..1) -> IG
Change-Id: I92f668b81cdd8003aff222926f8f1ed96b61e56d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385532
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Current fixed sized array for iSCSI target is not thread safe.
When newly created targets are inserted into the array, multiple
targets may be inserted into the same position. Linked list is
better than fixed size array to support dynamic reconfiguration.
Change-Id: I4db5a3ec16844db06e0cfcd2aef1f97952f15afa
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385371
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
To add initiators to an existing target, manage name and netmask
of initiator group by linked list. It is not easy for array to
detect duplication and change configuration.
Change-Id: Id9e77740e24ac309a33d8de1be37663681160d94
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379932
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
DPDK 17.11-rc3 switched to IOVA-centric
addressing. The old API is still available,
but is deprecated.
Change-Id: I7b54a1e626e39368acd2190dec725dbf30c7a5de
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/387654
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1) Replace some perror() calls with SPDK_ERRLOG
2) Use spdk_conf_section_get_boolval() to simplify the code
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2a6d0773b09ad16ea35cb6d2f18a9e0977dba31c
Reviewed-on: https://review.gerrithub.io/386666
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With the new asynchronous subsystem finish framework, we can
drive shutdown of existing connections as part of the subsystem
finish path instead of a separate spdk_iscsi_shutdown function
called as the shutdown function in response to SIGINT.
This is a step towards enabling a single target app that
supports multiple protocols (i.e. iSCSI + vhost + NVMe-oF).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id9f596a8091912a72ab7eb93cb45a46fdb130a48
Reviewed-on: https://review.gerrithub.io/386695
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
RPC is a default feature required for almost all usages,
so enable RPC by default, but with a UNIX domain socket
for security reasons.
-r can now be used from the command line to specify
an alternative RPC listen address from the default
/var/tmp/spdk.sock.
Remove the Enable parameter from the Rpc config section
but still allow specifying an alternative listen address
using the Listen parameter as an alternative to the
command line option. This keeps backward compatibility
for this release for anyone using the configuration file
still.
Remove the Rpc sections from all configuration files
that were using them, except for those that specified
alternate TCP ports for multi-process test cases. We
can fix these later to use an alternate UNIX domain
socket and to use the command line instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife0d03fcab638c67b659f1eb85348ddc2b55c4c4
Reviewed-on: https://review.gerrithub.io/386561
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the default config file does not exist, keep the
app's config_file options field as NULL, so that the
app code will not fail when trying to open a non-existent
file.
Also leverage the recent iSCSI and NVMe-oF refactoring,
to just skip trying to read config file parameters if no
config file exists (or the requisite section in the config
file is not present). vhost already handled this so it did
not need to be modified.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic32f0a7a8ce85322a8effd537b62d14732d7b82e
Reviewed-on: https://review.gerrithub.io/385497
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously users would have to pass CHAP and Mutual as
separate words on the DiscoveryAuthMethod line - but
this was problematic since then we would have to check
that the user did not specify Mutual without CHAP.
So instead just make Mutual infer CHAP.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I183d59145abb97198984541157522d6483b18e7c
Reviewed-on: https://review.gerrithub.io/385495
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Some invalid parameters would result in an immediate app exit, while
others such as DefaultTime2Wait would adjust an invalid value
rather than causing an app exit.
Instead, be consistent and just ignore any invalid values, with an
error message.
One exception is the CHAP + Mutual check - this will be fixed
in a separate patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I867e4a2a5685aec73df5e556d529b0356a9c3070
Reviewed-on: https://review.gerrithub.io/385494
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move all of the code related to reading global iSCSI
parameters to a new function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iccbb75996b29b0b7a87c602042f13aaf7935d7e1
Reviewed-on: https://review.gerrithub.io/385493
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_iscsi_app_read_parameters() does an SPDK_DEBUGLOG
for each of the global parameters - consolidate these
and move them to a separate function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If1543f9f5846420bf75f7a4aebaf540106f1df69
Reviewed-on: https://review.gerrithub.io/385492
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Modify spdk_iscsi_app_read_parameters() so that it sets
up all of the default values first, and then reads the
config file to update any parameters that may have been
specified.
This is in preparation for breaking out the config file
reading into a separate function that can be skipped
if no config file is available. In this case it will just
use the defaults.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0b9026ea87d171be22085a6baca24e2022cb58dd
Reviewed-on: https://review.gerrithub.io/385491
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
FirstBurstLength, MaxBurstLength and MaxRecvDataSegmentLength
cannot be configured, so there is no need to keep global data
members for these parameters - just use the default #defines
instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4b47e00a5594da8ec0b87192be4a23c4a2145bde
Reviewed-on: https://review.gerrithub.io/385490
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Our iSCSI target does not support disabling InitialR2T,
DataPDUInOrder and DataSequenceInOrder, and will fail
if someone tries to disable them in the config file.
So instead, just do not support these parameters at all.
This simplifies the code and reduces confusion.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icf1e01a6d12b758404769f77aa3f6221e6e3ee0d
Reviewed-on: https://review.gerrithub.io/385489
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This was not used anywhere - sessions default to
DEFAULT_MAXOUTSTANDINGR2T and never look at the global
MaxOutstandingR2T value.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia4874d8d747063f729061124194b60d15ad3ddac
Reviewed-on: https://review.gerrithub.io/385488
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Closing the framework has to go through all subsystems
without failure, so return codes are unnecessary.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I53c9b4df12d2357e641130869f398b18637e6ff7
Reviewed-on: https://review.gerrithub.io/381681
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
A few foundational change to support safe removal of portal.
- global login poller -> login poller per portal
- Caching portal data for active connection
Change-Id: I62f4d90c9ac11a433ad47421b2b0c69bfc3c70b7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379930
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Check duplication of registration of portals by using a global
portal list
Change-Id: I608fc9bd4473c11e69686e6474892f3f4272cd53
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379929
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace SPDK_TRACE_DEBUG with component-specific flags.
Change-Id: Iee7eafab5e6ac8713f247323a18552b5afb0e86a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375834
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This matches the name to the behavior and prepares for addition of a new
log macro for "info" log level.
Change-Id: I94ccd49face4309d3368e399528776ab140748c4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375833
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, we had a pdu->ahs pointer that was always NULL (never set
anywhere), and we would try to read data into this NULL pointer if the
initiator ever sent a PDU with a non-zero TotalAHSLength.
Rename the existing ahs_data array in the PDU to just "ahs" to minimize
the necessary changes. We never actually dereference the ahs structure,
so its type is not important. (We can cast it later if we add support
for anything that requires an AHS.)
Change-Id: I10d19a6e0d99f326794cbe6469eacedadc634c67
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/369315
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This variable was misleading and unnecessary. Replaced all it's
occurences with SPDK_SCSI_DEV_MAX_LUN.
Change-Id: Iaaf9ed5efb60f9a89585121d2fbec7b43c3723e9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/368115
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iee88b34165b3530c52301511ff1bd13c2680ea55
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367123
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This removes a dependency on the event framework.
Change-Id: Iac8e21b76012a949115e6b793bed89cac14a236c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365725
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This separates the iscsi library from the event
framework's subsystem mechanism.
Change-Id: I880ee4749ab0a411ca8dfd04f669868cba5c8b49
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365285
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The next patch will make bdev modules init
in the async manner.
Change-Id: I4909c80510d786daf54003b99a5925428cf37373
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/362110
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
- rename spdk_malloc_socket to spdk_dma_malloc_socket
- rename spdk_malloc to spdk_dma_malloc
- rename spdk_zmalloc to spdk_dma_zmalloc
- rename spdk_realloc to spdk_dma_realloc
- rename spdk_free to spdk_dma_free
Change-Id: I52a11b7a4243281f9c56f503e826fd7c4a1fd883
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/362604
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia3b3afc1a5331fe2b89d75eeddfd6e4430567cff
Reviewed-on: https://review.gerrithub.io/362450
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The contents of struct spdk_scsi_lun don't need to be part of the public
API.
Change-Id: I101b77871054557380610fd901ab38bada463202
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When performed limitation iSCSI tests, 128 target nodes with 1
connection for each target node, for IO bigger than 256KiB iSCSI
target will report run of out task pool issue sometimes. When
all the iSCSI parameters with default values, each connection
will consume maximum 189 tasks, we hardcoded the task pool with
16384, so 189 * 128 connection will exceed 16384. Increase the
default number from 16384 to 32768 will fix the issue.
With 1MiB block size and queue depth with 128 for each connection,
there will be 64 outstanding iSCSI commands in the iSCSI target,
for Writes, the maximum R2T number is 4, so the maximum tasks for
the 4 R2T is (1 + 16) * 4 = 68, 8KiB for the first burst task, 16
for the data segment. For Reads, the maximum 64 data in segment can
be used as 4 iSCSI Read commands. The rest 56 iSCSI commands will
cost 56 tasks, so the total number is 56 + 64 + 68 = 188, 1 additional
task for NOP task.
Change-Id: I945871cbe3076139f08c2ef647af2d9c84601dcb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
The 'next' event pointer was never used in the entire code base (always
NULL).
Change-Id: I75f999d3a2e10512d86edec1a5a46ef263e2635b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows the elimination of the spdk_event_get_arg1() and
spdk_event_get_arg2() macros, which accessed the event structure
directly; this was preventing the event structure definition from being
moved out of the public API header.
Change-Id: I74eced799ad7df61ff0b1390c63fb533e3fae8eb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SPDK_TRACELOG macro depends on a CONFIG setting (DEBUG), so it
should not be part of the public API.
Create a new include/spdk_internal directory for headers that should
only be used within SPDK, not exported for public use.
Change-Id: I39b90ce57da3270e735ba32210c4b3a3468c460b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Remove a DPDK dependency from generic code.
Change-Id: I8e3e2c0a36d980b426a1967ed1f88fb8b855c382
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This removes the 2 bytes of SenseLength from the beginning of the SCSI
sense_data buffer, so now the offsets within sense.data match up to the
expected values from the SCSI spec.
Change-Id: I9188560096a9ec5a8fcf83bec95201521b127494
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Remove #includes for all DPDK headers that weren't
necessary.
Change-Id: Ib02522e0f04e64a1c98afceb7508cc0e8d931a9d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This was only used for debugging. Everywhere else
used the spdk_memzone abstraction.
Change-Id: I8a828ea3c7abccb66c8a027cb13de43c560ff7a1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change the type from int to bool and change the name
from data_ref to data_from_mempool.
Change-Id: If1fc11761e63561443ed44d6a0860e416e424df8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Use the env library to perform all memory allocations
that previously called DPDK directly.
Change-Id: I6d33e85bde99796e0c85277d6d4880521c34f10d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This code calculates the difference between two pointers and then stores
it in an off_t, which is intended for file offsets.
In this particular case, the offset will never be large enough to
overflow off_t, but use the correct ptrdiff_t type anyway.
Change-Id: I6b159bf0286a7f5962d08b9894538f4d99c8647b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
We already require the assert header from the C standard library,
so use that instead of RTE_VERIFY to further isolate DPDK
dependencies.
Change-Id: I4a718af858c88aff6080e33e6c3dd533c077b8f4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
