A subsequent patch will need to use dirname(3), declared in libgen.h.
Because libgen.h is a POSIX header, the SPDK build requires that it is
defined in spdk/stdinc.h, not in the file that needs it.
libgen.h also declares basename() which has a conflicting declaration in
string.h. A small change is required in bdev_uring_read_sysfs_attr() to
accommodate this.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ib4ded2097881668aabdfd9f1683f933ce418db2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17557
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If an esnap clone is missing its snapshot the lvol should still open in
degraded mode. A degraded lvol will not have a bdev registered and as
such cannot perform any IO.
Change-Id: I736194650dfcf1eb78214c8896c31acc7a946b54
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16425
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This replaces nested if statements with equivalent logic that uses
early returns. Now the code fits in 100 columns and will allow the next
patch in this series to avoid adding a fifth level of indentation.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ief74d9fd166b2fe1042c78e12fe79d5f325aa502
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17548
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This provides information about logical volumes without providing
information about the bdevs. It is useful for listing the lvols
associated with specific lvol stores and for listing lvols that are
degraded and have no associated bdev.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I795161ac88d9707831d9fcd2079635c7e46ecc42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17547
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add RPC interfaces for creation of esnap clone lvols. This also
exercises esnap clone creation and various operations involving
snapshots and clones of esnap clones to ensure that bdev_get_bdevs
reports state correctly.
Change-Id: Ib87d01026ef6e45203c4d9451759885a7be02d87
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14978
Reviewed-by: Michal Berger <michal.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This adds the ability for create esnap clone lvol bdevs.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ifeef983430153d84d896d282fe914c6671283762
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16590
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Register an spdk_bs_esnap_dev_create callback when initializing or
loading an lvstore. This is the first of several commits required to add
support enable lvol bdevs to support external snapshots and esnap
clones.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I35c4e61fdbe5b93d65b9374e0ad91cb7fb94d1f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16589
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If an lvol is opened in degraded mode, keep track of the missing esnap
IDs and which lvols need them. A future commit will make use of this
information to bring lvols out of degraded mode when their external
snapshot device appears.
Change-Id: I55c16ad042a73e46e225369bfff2631958a2ed46
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16427
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
DAOS bdev was implicitly expecting `container_of` to be in daos_event.h
With upcoming DAOS release the location of `container_of` has changed.
`SPDK_CONTAINEROF` is now used in the module.
Signed-off-by: Denis Barakhtanov <denis.barahtanov@croit.io>
Change-Id: Ia88365322fef378af6b1708b8704827bca1b828d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17719
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is heap-use-after-free error when detaching a controller
when "io_path_stat" option set as true.
(if build spdk without asan ubsan, error is free(): corrupted
unsorted chunks)
It's because io_path is accessed in bdev_nvme_io_complete_nvme_status
after the io_path is freed.
io_path is freed when we detach the controller in function
_bdev_nvme_delete_io_path, this function will execute 1 and 2.
And before 4 is executed, 3 may be executed which accesses io_path.
1.spdk_put_io_channel() is called. bdev_nvme_destroy_ctrlr_channel_cb
has not been called.
2.free(io_path->stat); free(io_path);
3.bdev_nvme_poll; nbdev_io1 is success; bdev_nvme_io_complete_nvme_status()
access nbdev_io1->io_path.
4.bdev_nvme_destroy_ctrlr_channel_cb disconnect qpair and abort nbdev_io1.
This patch fixed this by moving 2 down under 4. We don't free io_path in
_bdev_nvme_delete_io_path but just remove from the nbdev_ch->io_path_list.
The processes to reproduce the error:
target: run nvmf_tgt
initiator: (build spdk with asan,ubsan enabled)
sudo ./build/examples/bdevperf --json bdevperf-multipath-rdma-active-active.json -r tmp.sock -q 128 -o 4096 -w randrw -M 50 -t 120
sudo ./scripts/rpc.py -s tmp.sock bdev_nvme_detach_controller -t rdma -a 10.10.10.10 -f IPv4 -s 4420 -n nqn.2016-06.io.spdk:cnode1 NVMe0
========
bdevperf-multipath-rdma-active-active.json
{
"subsystems": [
{
"subsystem": "bdev",
"config": [
{
"method":"bdev_nvme_attach_controller",
"params": {
"name": "NVMe0",
"trtype": "tcp",
"traddr": "10.169.204.201",
"trsvcid": "4420",
"subnqn": "nqn.2016-06.io.spdk:cnode1",
"hostnqn": "nqn.2016-06.io.spdk:init",
"adrfam": "IPv4"
}
},
{
"method":"bdev_nvme_attach_controller",
"params": {
"name": "NVMe0",
"trtype": "rdma",
"traddr": "10.10.10.10",
"trsvcid": "4420",
"subnqn": "nqn.2016-06.io.spdk:cnode1",
"hostnqn": "nqn.2016-06.io.spdk:init",
"adrfam": "IPv4",
"multipath": "multipath"
}
},
{
"method":"bdev_nvme_set_multipath_policy",
"params": {
"name": "NVMe0n1",
"policy": "active_active"
}
},
{
"method":"bdev_nvme_set_options",
"params": {
"io_path_stat": true
}
}
]
}
]
}
======
Change-Id: I8f4f9dc7195f49992a5ba9798613b64d44266e5e
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17581
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
If the idx gets to UINT32_MAX we need to ensure it doesn't wrap around
before we check if we're done iterating.
Fixes#2892
Change-Id: I2c57ed2a6f6eda16e2d1faa63e587dca0b380a17
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17687
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The target subsystem may expose more than 128 namespaces. To support
such subsystem, add a new parameter max_bdevs for the
bdev_nvme_attach_controller RPC.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I8fab20b9c4d52818205e05de6a31dbe0d31a10fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17651
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This file should be external to enable out-of-tree accel modules.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2e973d0e88d7145d0fc9714f56db48486b00f3b7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17419
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_bdev_queue_io_wait() can only be used when one of bdev submission
functions returns ENOMEM (i.e. there are no more spdk_bdev_ios on that
IO channel). Using it in any other case, e.g. on spdk_accel_append_*()
returning ENOMEM, will most likely result in failure. Therefore, to
avoid that, the IOs are completed with NOMEM status relying on the bdev
layer to retry them.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie0f03496e5d3180c481815b3f1b021e74ae2f46d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17319
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This actually allows malloc bdev to chain multiple accel operations
together. And, since the last operation will always be a copy, accel
should remove that copy by modifying previous operation's dst/src.
On my system, it improved bdevperf performance (single core, qd=4,
bs=128k, bdev_crypto on top of bdev_malloc, crypto_sw):
randread: 5668M/s -> 8201M/s
randwrite: 5148M/s -> 7856M/s
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5b9173fa70a42ee56f56c496a34037d46d2f420f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17202
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Because the copying is handled by accel, which will do push/pull when
necessary, we can report support for each registered memory domain.
Also, since verifying PI information would require doing a push/pull, we
don't report support for memory domains if bdev has DIF enabled.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id80f82aaac68e9dec2a6cae81d96a460105161d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17201
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Same reason for the change as in bdev_malloc_readv().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id52d8639df6a488342346283c90f12a2ba6f5736
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17199
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This only changes the interface bdev_malloc uses for scheduling the copy
to appends, but it won't chain those copies to an existing sequence, as
bdev_malloc doesn't report support for accel sequences yet. That will
be changed in one of the subsequent patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6db2c79b15cb96a1b07c6cf5514004c76b9d2e92
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17198
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
It reduces the size of the parameter list, which was already pretty
long, and will make it easier to use other bdev_io's fields (e.g. memory
domain, accel sequence).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I43a9d3a7cbb77915c00879c43540c9ec725c52d2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17197
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If a request was marked as failed, we don't want to retry it, so we
shouldn't override its status with NOMEM.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I85a522a7934d2d6f415620b9a323effefb91f299
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17196
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It gets rid of lots of casts to malloc_task/malloc_disk and makes the
code more readable.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Id50f0cbfa18adf5e7baafd58da03d290d6ba62c6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17195
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Not all raid modules may support memory domains - raid5f currently does
not. Add a parameter to struct raid_bdev_module to specify that.
Change-Id: I3285c118db846d290837606b3f85ac4b5277de97
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17601
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
SW PMD might process a crypto operation but failed
to submit it to a completions ring.
Such operation can't be retried if crypto operation
is inplace.
Handle such crypto op as a completed.
Verified by integrating rte openssl driver and
adding additional logs to check that SUCCESS
status received and completed as expected.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Ida161cec045167af752ebd5b57f41b2bbfe8b97c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16995
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Ensure no ephemeral bdev will generate its own UUID,
unless this value has been specified via RPC.
Generation is now being done by the bdev layer itself.
Change-Id: I11efe819a28a137b738959a96a7bdf8c79cfaf64
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17109
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make sure UUID can be passed to raid bdev type during
its creation.
Change-Id: I5fa9ca2d18d435fa882e1cb388b2e1918d821540
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17136
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Make sure UUID can be passed to error bdev type during
its creation.
Change-Id: I80b9c1b938a464c0cc8c61f871ae2044d8e09dfd
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17107
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
If we were not able to submit all configured
crypto ops, then we can just release crypto_ops
and mbuf object of these crypto ops and save
the actual number of submitted operation in
the accel task. Once all submitted operations
complete, poller will call
accel_dpdk_cryptodev_process_task func to submit
cyrpto operations for reamining data blocks.
If no crypto ops were submitted then the task
will be palced in the channel's queued_tasks
and poller will try to resubmit the task.
That in theory should increase performance
since we attempted to resubmit queued ops
with burst size==1 which is not efficient
Fixes issue #2907
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I4d17e8ed1ad5383848e4d09c46009c6cb2834360
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16784
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When accel task is processed is processed in
several iterations (submit part of cryops, wait
for completion and submit next part of cryops),
sgl is initialized with offset to exclude previously
processed blocks. However there is a bug since
spdk_iov_sgl_init doesn't advance iovs, as result
when we do sgl->iov->iov_len - sgl->iov_offset,
we may get unsigned int underflow.
Fix is init sgl with 0 offset and then advance it
with offset.
Modified unit test and added an assert in code to
verify this fix.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Ib53ff30f0c90d521f2cf6b3ec847b0d06869c2b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17456
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
this add output when execute save_config function
Signed-off-by: Tim Zhang <hgmz371@gmail.com>
Change-Id: Ib465dc424beb691e86425878588bb732574fc9b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16097
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This warning is returned regardless if the rte_power libs were
present or not as the clean target always removes them prior this
check.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I45bd350d434ec1fbb6504c7df05c4d27946d4f9b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13562
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unset the write_cache as the uring bdev does not support Flush I/O.
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: I8e6fce26b12176a7c77c40a1c9102be5cb72e358
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12900
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use posix_memalign to ensure aligned allocations. In reality, we'd get
64 byte alignment using even calloc, but this makes sure of it.
Change-Id: I6066e57c95b0f42cff439d452e4aed853189a523
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17508
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This OCF update is mainly focused on:
- New volume API
- New cache attach config instead of old cache device config
- UUID moved to different struct
- Persistent metadata is not supported due to metadata flapping (see 689c44c76ba87f80a9538c17220bb9ca6bffdda0 in OCF)
Signed-off-by: Amir Haroush <amir.haroush@huawei.com>
Signed-off-by: Shai Fultheim <shai.fultheim@huawei.com>
Change-Id: Ic3bc0f1b58550dc3b03b0afc9bcb43b2b9b988c6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17066
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Robert Baldyga
This allows the pipe to fill up entirely, instead of reserving 1 byte.
This tends to keep copies from the pipe aligned over time.
Change-Id: I4801d62fa839165efef61ea1c83f602931ee7018
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16990
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The 2 MiB minimum may be not reasonable for some users, so it is changed
to 4 KiB to allow wider range of possible values.
The new default is introduced to keep backward compatibility (2 MiB).
Signed-off-by: Szulik, Maciej <maciej.szulik@intel.com>
Change-Id: I450ff555f73ddd9be727ecc49209eb5af90fa88e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17406
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
To avoid races that lead to use-after-free errors during esnap device
hot add/remove, we need a way to ensure that the destroy callback does
not free a bs_dev until all consumers are done.
This adds reference counting to the create_channel() and
destroy_channel() callbacks. The reference couunt is initialized to 1
and is decremented by destroy(). The destroy() and destroy_channel()
callbacks are updated to free the bs_dev only when the reference count
drops to 0.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ie0b873717e431b33ce6548f878643dbc66d4f956
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16422
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove unused cleaner IO queue which is not kicked on creation.
While it is not a problem to have it,
the latest OCF code has new parallelize mechanism that uses all the IO queues.
Using an IO queue which is not kicked will hang the system.
After this change SPDK glue is somewhat closer to OCL glue,
both not using a dedicated cleaner IO queue.
Signed-off-by: Amir Haroush <amir.haroush@huawei.com>
Signed-off-by: Shai Fultheim <shai.fultheim@huawei.com>
Change-Id: I2e8ef0aaf11061d511151865c6062922d7934df2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17065
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Inline the internal of bdev_nvme_delete_ctrlr() and bdev_nvme_failover()
into _bdev_nvme_delete().
Change the _nvme_ctrlr_destruct() call from direct to message passing
to reduce lock hold time and avoid potential deadlock.
Then, protect nbdev_ctrlr via g_bdev_mutex_unlock and each nvme_ctrlr
via nvme_ctrlr->mutex.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I5cc2cf781d2846c51bce631c12fceaeade860a0b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16822
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If we find that the discovery entry already exists, a
single break doesn't work - that just breaks out of
the TAILQ_FOREACH. So instead change it to free
the resolver object and return directly.
Fixes issue #2945.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia31d6ecfa4fdc0a168eecc8ec4659da10a870770
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17209
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
The code was already ready for that, so it's only a matter of reporting
that to the bdev layer.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I46ea2e6794e00590930651c5ff8c36588de641b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Now that all crypto operations are using interfaces that support memory
domains, bdev_crypto can report support for memory domains.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I13a128a599f6560197fed3405599c2a6bb609703
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
There are lots of places when we need to abort accel sequence and
complete bdev_io with a failed status, so move that code to a dedicated
function.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5f6f4146c736d9c8e04b5667117d6e7ed824a654
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17088
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
All these callbacks look identical now, so there's little point in
having three different functions doing the same thing.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I60d1426b5d2b20d924776699885e6a9dd176504a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17024
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
After changing to spdk_accel_append_*, this code is no longer necessary,
as accel operations are now executed by the base bdev/bdev layer.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2e31249dfdf7abeee420744a5cc75b8273ecbad9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17023
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Similarly to reads, writes path is now also using the spdk_accel_append*
interface for performing encrypt operation.
Additionally, this patch also changes the way aux buffer is allocated -
spdk_bdev_io_get_aux_buf() was replaced with spdk_accel_get_buf(). This
ensures that the actual data buffer will be only allocated if it's
actually needed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I3cd1d4f5753a95709d7b81de23d9227102a74261
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17022
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
The new spdk_accel_apend_decrypt() interface is now used for all read
requests for decrypting data. This makes it possible to chain decrypt
operations with other operations in a sequence. Support for encryption
in the write path will be added in the following patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2f65044eeaf92232d839ddd166ae50889b3f386d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
getaddrinfo() does not use errno to report failures, instead
does it with return value.
This patch makes sure that proper error is reported.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I56569f991ae55d4b113f280394bb9ab375465a13
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17096
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removed bdev pmem implementation and makefiles
Removed bdev pmem rpc calls
Updated Python scripts
Updated match files for tests
Updated doc files
pkgdep and doc files will be updated when pmem
dependency is removed from libreduce
Change-Id: Ia1be5046159e04cd933ac13a0d5791e6d28219da
Signed-off-by: Marcin Spiewak <marcin.spiewak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17070
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Huawei is working on picking up support for OCF and the
associated SPDK bdev module, after Intel discontinued
support. So clarify various docs and strings to
reflect this for now. If everything goes according
to plan, deprecation notice will get removed before
23.05 release. If not, SPDK will just keep the
deprecation notice for 23.05, keep the code in-tree,
and give another release cycle to get things worked
out.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9ac6bf2f509005956440b41516ca00b0c1997361
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17085
Community-CI: Mellanox Build Bot
Reviewed-by: Amir Haroush <amir.haroush@huawei.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch aligns delay bdev with other bdev modules
that allow passing specific uuid during their creation.
See malloc or null bdev modules.
Change-Id: Icc5e816dd42b2e55e8d57712f2d4f125e486fdab
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16840
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Patch 55f947933 ("bdev: remove spdk_bdev_ext_io_opts from spdk_bdev_io")
changed the way bdev_nvme submits IO to the NVMe driver causing
performance degradation for requests with iovcnt = 1, as they also had
to go through the path that executes the reset_sgl/next_sge callbacks.
This patch reverts those changes back to the original code checking
iovcnt and using the non-SGL functions if possible.
Suggested-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5e7c6620d38b7690ff862d8cd0075afacc578217
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16961
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
If the bs_dev was opened read-write, continue to take a
read-many-write-one claim. If it was opened read-only, take a
read-many-write-none claim.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I25d977c6961f962423899fb891ec912cd847930a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16282
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
External snapshots, which will be introduced in a later commit, will
need read-only blob_bdev instances. This support is partially needed to
support underlying devices that are naturally read-only and partially to
provide an extra layer of protection against accidental writes.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: Ibcb28d00ad644a6053aa5f4de15471c2cd8e348a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With bdev_nvme accel_comp_poll is always created, even if it is not
really used e.g bdev_nvme with vfio-user transport.
accel_comp_poll poller is registered when accel_channel is created, in
order to start it lazily this patch creates accel_channel during first
usage.
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I5c710a038606ada00c9bfde6a4d9691ee8f6d204
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16957
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
There's no need to add 1 to the pipe size, it
actually results in unaligned accesses after we've
cycled through the pipe buffer for the first time.
Fixes: eb98488 ("sock/posix: Internally buffer reads.")
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iff79d40694dab1afe128ccac0c7c7a28cd827a3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
`rpc_bdev_lvol_resize` and `rpc_bdev_lvol_create` can now use size
in MiB instead of `size` in bytes. This change make param `size`
deprecated and using both `size` and `size_in_mib` return error.
Since `bdev_lvol_resize` and `bdev_lvol_create` use size in MiB,
name of param should reflect it, previously used param `size` is
positional therefore there is no need to keep it as deprecated.
This patch fix issue: #2346
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: Ibbe2c056bb63d9f82dee91c87fdd501ce441d5f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16901
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change the way we generate UUIDs to use uuid_generate_sha1()
from libuuid.
Fixes#2788.
Change-Id: Id750a7de74fb37bc3ab3ab06b3254b49d73f4be3
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
The following patches will add mutex for bdev_nvme_delete() to improve
handling race conditions. This refactoring make such change easier.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I8971684a708bce89872f08f75db86eb3b723f380
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16821
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If alternate paths and an active path are treated separately in
_bdev_nvme_delete(), it will be much easier to protect a path list
from delete operation by mutex.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie3bed095fd92b80c0487ef7b136953ad03a174eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16820
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Factor out path deletion operation for one nvme_ctrlr into _bdev_nvme_delete().
_bdev_nvme_delete() traverses all remaining nvme_ctrlrs even after one
nvme_ctrlr was successfully deleted. To remember the successfule
deletion, use two return value variables, rc and _rc. For _rc returned by
_bdev_nvme_delete(), copy _rc to rc if _rc is zero, return _rc immediately
if _rc is not -ENXIO, or do nothing otherwise.
This improves the readability and makes us easier to add more changes.
Additionally, for _bdev_nvme_reset_io(), it is simpler to overwrite rc
to 0 if rc is -EBUSY rather than to return 0 if rc is -EBUSY. This is
very small change and hence done together.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I57eafd22918c8c976b9c51bedb9e4369976c1d5c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16819
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The next patch wants to use _bdev_nvme_delete() as a function name.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Iba103868e74795bf42c443a377c77e9c073329fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16818
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This improves the readability and makes us easier to add more changes.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I55d7925d70f2a204f65a81f3fc44cf96b69c3ebe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16709
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These functions:
_vbdev_lvs_grow_examine_finish
_vbdev_lvs_grow_examine_cb
_vbdev_lvs_grow_examine
are almost exact copies of:
_vbdev_lvs_examine_finish
_vbdev_lvs_examine_cb
vbdev_lvs_examine
Remove the duplicated grow functions. Factor out the common entry point
into _vbdev_lvs_examine() which accepts a callback to perform the
required action (spdk_lvs_load or spdk_lvs_grow).
Change-Id: I9805f29e22812051608873207401e3786dab7103
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16942
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove _vbdev_lvol_examine_close_cb() because it is identical as the
code at the end of _vbdev_lvs_examine_finish().
Remove the INFOLOG message because it is redundant (there's an ERRLOG
just before) and inconsistent with the lvolerrno != 0 case, where there
is no such message.
Change-Id: I8488a8b5fcbaf1895f4953081d98bc13f82be221
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16941
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the past, we didn't use the distinction between logical block size
and physical block size. Now it's possible to optionally set the
physical block size to be different then logical block size. It's useful
for NVMe 512e Advanced Format tests.
Change-Id: I1b596da471031ee90dafc6ba6276cebf769b5ea2
Signed-off-by: Panfil, Wojciech <wojciech.panfil@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16793
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the past we didn't use the distinction between logical block size and physical block
size in null bdev. Now we can optionally set the physical block size to
be different then logical block size. It's useful for testing NVMe 512e
Advanced Format scenarios.
Change-Id: Ib3713af9a4d0ce7fd322170b4d87100cfc91a103
Signed-off-by: Panfil, Wojciech <wojciech.panfil@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16792
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When bdev_rados_cluster_init encounters an error, it shuts down the cluster
before returning, but since the pointer is still set, bdev_rbd_free will
attempt to shut it down again, which causes a crash.
Therefore, set the pointer to NULL after the first shutdown to indicate
that the cluster object does not exist anymore.
Change-Id: Ie403471e8aba881cb6380e74bd1a4ca8d67cbc68
Signed-off-by: Lukas Stockner <lstockner@genesiscloud.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16203
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The spdk_bdev_ext_io_opts structure is used to pass extra options when
submitting a bdev IO request, without having to modify/add functions to
handle new options. Additionally, the structure has a size field to
allow adding new fields without breaking the ABI (and thus having to
bump up the major version of a library).
It is also a part of spdk_bdev_io and there are several reasons for
removing it from that structure:
1. The size field only makes sense in structures that are passed
through pointers. And spdk_bdev_ext_io_opts is indeed passed as a
pointer to spdk_bdev_{readv,writev}_blocks_ext(), however it is
also embedded in spdk_bdev_io (internal.ext_opts_copy), which is
also part of the API. It means that each time a new field is added
to spdk_bdev_ext_io_opts, the size of spdk_bdev_io will also
change, so we will need to bump the major version of libspdk_bdev
anyway, thus making spdk_bdev_ext_io_opts.size useless.
2. The size field also makes internal.ext_opts cumbersome to use, as
each time one of its fields is accessed, we need to check the size.
Currently the code doesn't do that, because all of the existing
spdk_bdev_ext_io_opts fields were present when this structure was
initially introduced, but we'd need to do check the size before
accessing any new fields.
3. spdk_bdev_ext_io_opts has a metadata field, while spdk_bdev_io
already has u.bdev.md_buf, which means that we store the same thing
in several different places in spdk_bdev_io (u.bdev.md_buf,
u.bdev.ext_opts->metadata, internal.ext_opts->metadata).
Therefore, this patch removes all references to spdk_bdev_ext_io_opts
from spdk_bdev_io and replaces them with fields (memory_domain,
memory_domain_ctx) that were missing in spdk_bdev_io. Unfortunately,
this change breaks the API and requires changes in bdev modules that
supported spdk_bdev_io.u.bdev.ext_opts.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I49b7524eb84d1d4d7f12b7ab025fec36da1ee01f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16773
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also deprecate the existing spdk_nvmf_request_data() API, which is
incompatible with iovecs.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I44df8ff30a431873a0c2f34b0cdb58df858fd7e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16200
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
It has been implemented in commit 56e2d632ce to reset all nvme_ctrlrs
of a bdev controller sequentially. Update the log.
Change-Id: Id87bf99d7e269c8ad0d6b2576e2329455601ec55
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
With the introduction bdev module claims v2, existing consumers should
transition off of v1 claims. This transitions blob bdevs from v1
exclusive writer claims to v2 read write once claims.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I1884585a540fa17ee341430e03de3c4f5d35322b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16168
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We used hardcoded value set by bdev module, however
this value might be changed, so get a real value
from iobug config
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Id15b602f699f3dd63aeff11fb063bb62c384663d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16601
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For JSON RPC, boolean response with false value may not be regarded as error.
Previously many cases were replaced to use
spdk_jsonrpc_send_error_response() explicitly. Replace one of the
remaining cases in this patch.
rpc_blobfs_detect() uses boolean response for not only true but also
false, but it had a memory leak bug. Fix it together in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Iaff21115282f638038345daa986b5c743ba9a3ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16621
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For JSON RPC, boolean response with false value may not be regarded as error.
Previously many cases were replaced to use
spdk_jsonrpc_send_error_response() explicitly. However, this pattern did
not become established and new bdev modules used
spdk_jsonrpc_send_bool_response() with false.
Once again, replace remaining cases in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie8858bc8ff7c36bc3a829977044a91d459db76f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16555
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The NVMe bdev module has been refined since the bdev_nvme_apply_firmware
RPC was added. It is enough to open any one NVMe bdev even if one NVMe
controller has multiple namespaces. Hence, let's remove
spdk_bdev_first/next() calls from rpc_bdev_nvme_apply_firmware() rather
than replacing these by spdk_for_each_bdev(). Additionally, not only
spdk_bdev_close() but also spdk_put_io_channel() and
spdk_jsonrpc_send_*_response() should be done on the original thread.
Hence, redirect to the original thread always when a NVMe command is
returned, and rename firm_ctx->thread by firm_ctx->orig_thread for
clarification. orig_thread will be better than comment.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I90b1986584b3926980fd265e4fded194eb5a2d00
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16541
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is enough to embed an instance of rpc_apply_firmware structure into
firmware_update_info structure.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I41a480a0b8cd56f4b537512d5f83c5cbd5eee718
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Previously, bdev_nvme_apply_firmware() used a temporary character array
to reduce the calls of spdk_jsonrpc_send_error_response().
Change these to call spdk_jsonrpc_send_error_response() directly.
This will simplify the next patch to replace spdk_bdev_first/next() by
spdk_for_each_bdev()ss.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I87ffc9416232dcaba30202ebbe0cb4b185a9563d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Support OCF is now winding down and will not see further updates.
Change-Id: Ica2026d3a9ad13daf677fcce2b7974eb333971fc
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16392
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The gpt bdev module has an off-by-one error. When it
calculates the size of the partition, it simply does
"end - start", when really it should be "end - start + 1".
We cannot just fix it by changing the math here, any
consumers of the partition may have put down metadata
on the partition based on the old size.
So instead add a new SPDK partition type. SPDK will keep
the existing off-by-one behavior when it finds the old
partition type, but will use the correct math when finding
the new partition type.
Fixes issue #2801.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I48eb48c781f1968b59e52b4477ca45e9c81eac11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16298
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is required when volume is attached via different storage boxes
for example while migrating it.
Signed-off-by: Gili Buzaglo <gili.buzaglo@kioxia.com>
Change-Id: I680c781ae5de078972d6aef547804d60fff3c643
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16407
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the future releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 23.05
release.
Looks like this was left over from prior LTS, to avoid that
make sure it is only skipped when running against v23.01.x as latest
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Short reference to how the versions were changed:
MAX=$(git grep "SO_VER := " | cut -d" " -f 3 | sort -ubnr | head -1)
for((i=$MAX;i>0;i-=1)); do find . -name "Makefile" -exec \
sed -i -e "s/SO_VER := $i\$/SO_VER := $(($i+1))/g" {} +; done
find . -name "Makefile" -exec \
sed -i -e "s/SO_MINOR := .*/SO_MINOR := 0/g" {} +
Change-Id: I3e5681802c0a5ac6d7d652a18896997cd07cc8bf
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16419
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was added during debug/development and
was not deleted by accident.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: I146748151623a3ea4808c7b5cc34085d30ca81b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16388
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
directly
This patch removes hardcoded compressdev code from the
vbdev module and instead uses the accel_fw. The port required
a few changes based on how things are plumbed and accessed,
nothing that isn't be too obscure. CI tests were updated to
run ISAL accel_fw module as well as DPDK compressdev with QAT.
Unit tests for the new module will follow in a separate patch.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I769cbc888658fb846d89f6f0bfeeb1a2a820767e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13610
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
ublk backend could support ublk driver with kernel. Specify
configuration parameter to start it up.
Signed-off-by: Yifan Bian <yifan.bian@intel.com>
Co-authored-by: Xiaodong Liu <xiaodong.liu@intel.com>
Change-Id: I55e7d757e04315b25e9bfab5fdcbb6621be3e29e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15680
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The mlx5 accel module supports crypto operations.
Data buffer is split into `block_size` chunks and each
chunk is enrypted individually.
mlx5 library contains some utility functions that will
later be used by other libraries, this lib will be
exntended later.
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: Iacdd8caaade477277d5a95cfd53e9910e280a73b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All DPDK related code is removed, handling of
RESET command was sligthly updated.
Handling of -ENOMEM was updated for cases when
accel API returns -ENOMEM
Crypto tests in blockdev.sh were extended with more
crypto_bdevs to verify NOMEM cases - that failed
with original vbdev_crypto implementation
Signed-off-by: Alexey Marchuk <alexeymar@nvidia.com>
Change-Id: If1feba2449bee852c6c4daca4b3406414db6fded
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14860
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Attempt to send any queued writes even if the socket is in a group. This
will not work if there is a send task already outstanding.
Change-Id: Icc0b5884e3d247042194ad26b30340ceb824886c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15212
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
