test: add new ext4test

This test will create a malloc and NVMe iSCSI target node,
perform an iSCSI login, create and mount a filesystem, then
copy the SPDK contents to the mount and do a build.

Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I00291e6ca768dd4b685086cf1479098558b9329f

autotest.sh

@@ -98,6 +98,7 @@ if [ $(uname -s) = Linux ]; then
 	time ./test/iscsi_tgt/reset/reset.sh
 	time ./test/iscsi_tgt/rpc_config/rpc_config.sh
 	time ./test/iscsi_tgt/idle_migration/idle_migration.sh
+	time ./test/iscsi_tgt/ext4test/ext4test.sh
 	timing_exit iscsi_tgt
 fi
 

test/iscsi_tgt/ext4test/ext4test.sh

@@ -0,0 +1,90 @@
+#!/usr/bin/env bash
+
+testdir=$(readlink -f $(dirname $0))
+rootdir=$testdir/../../..
+source $rootdir/scripts/autotest_common.sh
+
+if [ ! -z $1 ]; then
+	DPDK_DIR=$(readlink -f $1)
+fi
+
+if [ -z "$TARGET_IP" ]; then
+	TARGET_IP=127.0.0.1
+	echo "TARGET_IP not defined - using 127.0.0.1"
+fi
+
+if [ -z "$INITIATOR_IP" ]; then
+	INITIATOR_IP=127.0.0.1
+	echo "INITIATOR_IP not defined - using 127.0.0.1"
+fi
+
+timing_enter ext4test
+
+# iSCSI target configuration
+PORT=3260
+RPC_PORT=5260
+INITIATOR_TAG=2
+INITIATOR_NAME=ALL
+NETMASK=$INITIATOR_IP/32
+
+rpc_py="python $rootdir/scripts/rpc.py"
+
+./app/iscsi_tgt/iscsi_tgt -c $testdir/iscsi.conf &
+pid=$!
+echo "Process pid: $pid"
+
+trap "killprocess $pid; exit 1" SIGINT SIGTERM EXIT
+
+waitforlisten $pid ${RPC_PORT}
+echo "iscsi_tgt is listening. Running tests..."
+
+$rpc_py add_portal_group 1 $TARGET_IP:$PORT
+$rpc_py add_initiator_group $INITIATOR_TAG $INITIATOR_NAME $NETMASK
+# "1:2" ==> map PortalGroup1 to InitiatorGroup2
+# "64" ==> iSCSI queue depth 64
+# "1 0 0 0" ==> disable CHAP authentication
+$rpc_py construct_target_node Target0 Target0_alias Nvme0n1p0:0 1:2 64 1 0 0 0
+$rpc_py construct_target_node Target1 Target1_alias Malloc0:0 1:2 64 1 0 0 0
+
+sleep 1
+
+iscsiadm -m discovery -t sendtargets -p $TARGET_IP:$PORT
+iscsiadm -m node --login -p $TARGET_IP:$PORT
+
+trap 'for new_dir in `dir -d /mnt/*dir`; do umount $new_dir; rm -rf $new_dir; done; \
+	iscsicleanup; killprocess $pid; exit 1' SIGINT SIGTERM EXIT
+
+sleep 1
+
+
+devs=$(iscsiadm -m session -P 3 | grep "Attached scsi disk" | awk '{print $4}')
+
+for dev in $devs; do
+	mkfs.ext4 -F /dev/$dev
+	mkdir -p /mnt/${dev}dir
+	mount /dev/$dev /mnt/${dev}dir
+
+	rsync -qav --exclude=".git" $rootdir/ /mnt/${dev}dir/spdk
+	cd /mnt/${dev}dir/spdk
+
+	make DPDK_DIR=$DPDK_DIR clean
+	make DPDK_DIR=$DPDK_DIR -j16
+
+	# Print out space consumed on target device to help decide
+	#  if/when we need to increase the size of the malloc LUN
+	df -h /dev/$dev
+
+	rm -rf /mnt/${dev}dir/spdk
+	cd -
+done
+
+for dev in $devs; do
+	umount /mnt/${dev}dir
+	rm -rf /mnt/${dev}dir
+done
+
+trap - SIGINT SIGTERM EXIT
+
+iscsicleanup
+killprocess $pid
+timing_exit ext4test

test/iscsi_tgt/ext4test/iscsi.conf

@@ -0,0 +1,53 @@
+# iSCSI target configuration file
+#
+# Please write all parameters using ASCII.
+# The parameter must be quoted if it includes whitespace.
+#
+# Configuration syntax:
+# Spaces at head of line are deleted, other spaces are as separator
+# Lines starting with '#' are comments and not evaluated.
+# Lines ending with '\' are concatenated with the next line.
+# Bracketed keys are section keys grouping the following value keys.
+# Number of section key is used as a tag number.
+#  Ex. [TargetNode1] = TargetNode section key with tag number 1
+[Global]
+  Comment "Global section"
+
+  # syslog facility
+  LogFacility "local7"
+
+[iSCSI]
+  # node name (not include optional part)
+  # Users can optionally change this to fit their environment.
+  NodeBase "iqn.2013-06.com.intel.ch.spdk"
+
+  AuthFile /usr/local/etc/spdk/auth.conf
+
+  # socket I/O timeout sec. (polling is infinity)
+  Timeout 30
+
+  # authentication information for discovery session
+  DiscoveryAuthMethod Auto
+  #DiscoveryAuthGroup AuthGroup9999
+
+  MaxSessions 4
+  #MaxConnectionsPerSession 2
+
+
+  ImmediateData Yes
+  ErrorRecoveryLevel 0
+
+[Rpc]
+  Enable Yes
+
+# Do not specify InitiatorGroup, PortalGroup, Malloc,
+#  or TargetNode entries here - the autotest.sh script
+#  will use RPC to set up this part of the configuration.
+[Nvme]
+  NumControllers 1
+  NvmeLunsPerNs 1
+  LunSizeInMB 4096
+
+[Malloc]
+  NumberOfLuns 1
+  LunSizeInMB 512