fio: Remove hardcoded path to fio repo

The hardcoded path is replaced with $CONFIG_FIO_SOURCE_DIR as defined
during the compile time.

Additionally, all checks which determine if fio is available are now
based on $CONFIG_FIO_PLUGIN=y knob instead of the presence of the fio
repo.

Change-Id: Ie469747f3863c9561f53d32e8c3f29778afaaf74
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1108
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>

test/bdev/blockdev.sh

@@ -299,7 +299,7 @@ hello_world_bdev=${bdev_list[0]}
 run_test "bdev_hello_world" $rootdir/examples/bdev/hello_world/hello_bdev -c $conf_file -b $hello_world_bdev
 run_test "bdev_bounds" bdev_bounds
 run_test "bdev_nbd" nbd_function_test $conf_file "$bdevs_name"
-if [ -d /usr/src/fio ]; then
+if [[ $CONFIG_FIO_PLUGIN == y ]]; then
         if [ "$test_type" = "nvme" ] || [ "$test_type" = "gpt" ]; then
                 # TODO: once we get real multi-ns drives, re-enable this test for NVMe.
                 echo "skipping fio tests on NVMe due to multi-ns failures."

test/common/autotest_common.sh

@@ -122,10 +122,10 @@ cat << EOL >> "$asan_suppression_file"
 leak:spdk_fs_alloc_thread_ctx
 
 # Suppress known leaks in fio project
-leak:/usr/src/fio/parse.c
-leak:/usr/src/fio/iolog.c
-leak:/usr/src/fio/init.c
-leak:/usr/src/fio/filesetup.c
+leak:$CONFIG_FIO_SOURCE_DIR/parse.c
+leak:$CONFIG_FIO_SOURCE_DIR/iolog.c
+leak:$CONFIG_FIO_SOURCE_DIR/init.c
+leak:$CONFIG_FIO_SOURCE_DIR/filesetup.c
 leak:fio_memalign
 leak:spdk_fio_io_u_init
 
@@ -186,8 +186,8 @@ if [ -f /usr/include/infiniband/verbs.h ]; then
 	config_params+=' --with-rdma'
 fi
 
-if [ -d /usr/src/fio ]; then
-	config_params+=' --with-fio=/usr/src/fio'
+if [[ -d $CONFIG_FIO_SOURCE_DIR ]]; then
+	config_params+=" --with-fio=$CONFIG_FIO_SOURCE_DIR"
 fi
 
 if [ -d ${DEPENDENCY_DIR}/vtune_codes ]; then
@@ -941,7 +941,7 @@ function fio_config_gen()
 	local config_file=$1
 	local workload=$2
 	local bdev_type=$3
-	local fio_dir="/usr/src/fio"
+	local fio_dir=$CONFIG_FIO_SOURCE_DIR
 
 	if [ -e "$config_file" ]; then
 		echo "Configuration File Already Exists!: $config_file"
@@ -1009,7 +1009,7 @@ function fio_config_add_job()
 function fio_bdev()
 {
 	# Setup fio binary cmd line
-	local fio_dir="/usr/src/fio"
+	local fio_dir=$CONFIG_FIO_SOURCE_DIR
 	local bdev_plugin="$rootdir/examples/bdev/fio_plugin/fio_plugin"
 
 	# Preload AddressSanitizer library to fio if fio_plugin was compiled with it
@@ -1022,7 +1022,7 @@ function fio_bdev()
 function fio_nvme()
 {
 	# Setup fio binary cmd line
-	local fio_dir="/usr/src/fio"
+	local fio_dir=$CONFIG_FIO_SOURCE_DIR
 	local nvme_plugin="$rootdir/examples/nvme/fio_plugin/fio_plugin"
 
 	# Preload AddressSanitizer library to fio if fio_plugin was compiled with it

test/ftl/fio.sh

@@ -23,7 +23,7 @@ device=$1
 tests=${suite[$2]}
 uuid=$3
 
-if [ ! -d /usr/src/fio ]; then
+if [[ $CONFIG_FIO_PLUGIN != y ]]; then
 	echo "FIO not available"
 	exit 1
 fi

test/iscsi_tgt/perf/iscsi_target.sh

@@ -13,7 +13,7 @@ MIX=100
 IODEPTH=128
 RUNTIME=60
 RAMP_TIME=10
-FIO_PATH="/usr/src/fio"
+FIO_PATH=$CONFIG_FIO_SOURCE_DIR
 DISKNO="ALL"
 CPUMASK=0x02
 NUM_JOBS=1

test/nvme/nvme.sh

@@ -125,6 +125,6 @@ if [ $(uname) != "FreeBSD" ]; then
 	kill_stub
 fi
 
-if [ -d /usr/src/fio ]; then
+if [[ $CONFIG_FIO_PLUGIN == y ]]; then
 	run_test "nvme_fio" nvme_fio_test
 fi

test/nvme/perf/common.sh

@@ -26,7 +26,7 @@ RUNTIME=600
 RAMP_TIME=30
 NUMJOBS=1
 REPEAT_NO=3
-FIO_BIN="/usr/src/fio/fio"
+FIO_BIN=$CONFIG_FIO_SOURCE_DIR/fio
 PLUGIN="nvme"
 DISKNO=1
 CPUS_ALLOWED=1

test/nvmf/host/fio.sh

@@ -10,7 +10,7 @@ rpc_py="$rootdir/scripts/rpc.py"
 
 nvmftestinit
 
-if [ ! -d /usr/src/fio ]; then
+if [[ $CONFIG_FIO_PLUGIN != y ]]; then
 	echo "FIO not available"
 	exit 1
 fi

test/vhost/initiator/blockdev.sh

@@ -6,7 +6,7 @@ source $rootdir/test/common/autotest_common.sh
 source $rootdir/test/vhost/common.sh
 
 PLUGIN_DIR=$rootdir/examples/bdev/fio_plugin
-FIO_PATH="/usr/src/fio"
+FIO_PATH=$CONFIG_FIO_SOURCE_DIR
 virtio_bdevs=""
 virtio_with_unmap=""
 

test/vhost/perf_bench/vhost_perf.sh

@@ -25,7 +25,7 @@ wwpn_prefix="naa.5001405bc6498"
 
 fio_bin="--fio-bin=/home/sys_sgsw/fio_ubuntu"
 fio_iterations=1
-precond_fio_bin="/usr/src/fio/fio"
+precond_fio_bin=$CONFIG_FIO_SOURCE_DIR/fio
 disk_map=""
 
 disk_cfg_bdfs=()
@@ -64,7 +64,7 @@ function usage()
 	echo "    --use-split             Use split vbdevs instead of Logical Volumes"
 	echo "    --limit-kernel-vhost=INT  Limit kernel vhost to run only on a number of CPU cores."
 	echo "    --run-precondition      Precondition lvols after creating. Default: true."
-	echo "    --precond-fio-bin       FIO binary used for SPDK fio plugin precondition. Default: /usr/src/fio/fio."
+	echo "    --precond-fio-bin       FIO binary used for SPDK fio plugin precondition. Default: $CONFIG_FIO_SOURCE_DIR/fio."
 	echo "    --custom-cpu-cfg=PATH   Custom CPU config for test."
 	echo "                            Default: spdk/test/vhost/common/autotest.config"
 	echo "    --disk-map              Disk map for given test. Specify which disks to use, their SPDK name,"

test/vmd/vmd.sh

@@ -54,7 +54,7 @@ function vmd_bdev_svc {
 run_test "vmd_identify" vmd_identify
 run_test "vmd_hello_world" $rootdir/examples/nvme/hello_world/hello_world -V
 run_test "vmd_perf" vmd_perf
-if [ -d /usr/src/fio ]; then
+if [[ $CONFIG_FIO_PLUGIN == y ]]; then
 	run_test "vmd_fio" vmd_fio
 fi